regulator: max77826: Add MAX77826 support
Subsystems (3)
v2 cover regulator: max77826: Add MAX77826 support
The MAX77826 is a PMIC found on the Samsung Galaxy S5 (klte) and possibly other devices. It is produced by Maxim Integrated and contains 15 LDOs a buck and a buck boost regulator.
v1: https://lkml.org/lkml/2020/4/13/489
changes in v2:
- change compatible string from maxim,max77826-regulator to maxim,max77826
- reword DT bindings patch message
Iskren Chernev (3):
regulator: max77826: Add max77826 regulator driver
regulator: Document bindings for max77826
ARM: dts: qcom: msm8974-klte: Add max77826 pmic node
.../bindings/regulator/maxim,max77826.yaml | 69 ++++ .../boot/dts/qcom-msm8974-samsung-klte.dts | 110 +++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 11 + drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/max77826-regulator.c | 301 ++++++++++++++++++ 6 files changed, 502 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77826.yaml create mode 100644 drivers/regulator/max77826-regulator.c
--
2.26.0
PATCH v2 1/3 regulator: max77826: Add max77826 regulator driver
Adding regulator driver for the Maxim max77826 device.
The max77826 PMIC contains a high-efficiency BUCK regulator, a BUCK BOOST regulator and 15 LDOs. It is designed for smartphone and tablet applications and is accessed over I2C.
--- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/max77826-regulator.c | 301 +++++++++++++++++++++++++ 3 files changed, 312 insertions(+) create mode 100644 drivers/regulator/max77826-regulator.c
drivers/regulator/Kconfig +10 -0
@@ -585,6 +585,16 @@ config REGULATOR_MAX77802 Exynos5420/Exynos5800 SoCs to control various voltages. It includes support for control of voltage and ramp speed. +config REGULATOR_MAX77826 + tristate "Maxim 77826 regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a Maxim 77826 regulator via I2C bus. + The regulator include 15 LDOs, BUCK and BUCK BOOST regulator. + It includes support for control of output voltage. This + regulator is found on the Samsung Galaxy S5 (klte) smartphone. + config REGULATOR_MC13XXX_CORE tristate
drivers/regulator/Makefile +1 -0
@@ -74,6 +74,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o +obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
drivers/regulator/max77826-regulator.c new file +301 -0
301 lines not on this page · raw message
Signature · 1 line
2.26.0
Mark Brown
maintainerApplied "regulator: max77826: Add max77826 regulator driver" to the regulator tree
The patch
regulator: max77826: Add max77826 regulator driver
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From e7314653dc08efbf3c6a17fff7290cf2d89ea03b Mon Sep 17 00:00:00 2001
From: Iskren Chernev <[email protected]>
Date: Tue, 14 Apr 2020 20:22:48 +0300
Subject: [PATCH] regulator: max77826: Add max77826 regulator driver
Adding regulator driver for the Maxim max77826 device.
The max77826 PMIC contains a high-efficiency BUCK regulator, a BUCK BOOST regulator and 15 LDOs. It is designed for smartphone and tablet applications and is accessed over I2C.
--- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/max77826-regulator.c | 301 +++++++++++++++++++++++++ 3 files changed, 312 insertions(+) create mode 100644 drivers/regulator/max77826-regulator.c
drivers/regulator/Kconfig +10 -0
@@ -585,6 +585,16 @@ config REGULATOR_MAX77802 Exynos5420/Exynos5800 SoCs to control various voltages. It includes support for control of voltage and ramp speed. +config REGULATOR_MAX77826 + tristate "Maxim 77826 regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a Maxim 77826 regulator via I2C bus. + The regulator include 15 LDOs, BUCK and BUCK BOOST regulator. + It includes support for control of output voltage. This + regulator is found on the Samsung Galaxy S5 (klte) smartphone. + config REGULATOR_MC13XXX_CORE tristate
drivers/regulator/Makefile +1 -0
@@ -74,6 +74,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o +obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
drivers/regulator/max77826-regulator.c new file +301 -0
301 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v2 2/3 regulator: Document bindings for max77826
In reply to Iskren ChernevAdd device tree binding information for max77826 regulator driver.
--- .../bindings/regulator/maxim,max77826.yaml | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
Documentation/devicetree/bindings/regulator/maxim,max77826.yaml new file +69 -0
@@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX77826 PMIC + +maintainers: + - Iskren Chernev <[email protected]> + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - maxim,max77826 + + reg: + maxItems: 1 + + regulators: + type: object + allOf: + - $ref: regulator.yaml# + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST + + patternProperties: + "^LDO([1-9]|1[0-5])$": + type: object + allOf: + - $ref: regulator.yaml# + + "^BUCK|BUCKBOOST$": + type: object + allOf: + - $ref: regulator.yaml# + + additionalProperties: false + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "maxim,max77826"; + reg = <0x69>; + + regulators { + LDO2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <3587500>; + }; + }; + }; + }; +...
Signature · 1 line
2.26.0
Mark Brown
maintainerApplied "regulator: Document bindings for max77826" to the regulator tree
The patch
regulator: Document bindings for max77826
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 78f022d08006b4a641351ec74aef9b084ad50964 Mon Sep 17 00:00:00 2001
From: Iskren Chernev <[email protected]>
Date: Tue, 14 Apr 2020 20:22:49 +0300
Subject: [PATCH] regulator: Document bindings for max77826
Add device tree binding information for max77826 regulator driver.
--- .../bindings/regulator/maxim,max77826.yaml | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77826.yaml
Documentation/devicetree/bindings/regulator/maxim,max77826.yaml new file +69 -0
@@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX77826 PMIC + +maintainers: + - Iskren Chernev <[email protected]> + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - maxim,max77826 + + reg: + maxItems: 1 + + regulators: + type: object + allOf: + - $ref: regulator.yaml# + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST + + patternProperties: + "^LDO([1-9]|1[0-5])$": + type: object + allOf: + - $ref: regulator.yaml# + + "^BUCK|BUCKBOOST$": + type: object + allOf: + - $ref: regulator.yaml# + + additionalProperties: false + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "maxim,max77826"; + reg = <0x69>; + + regulators { + LDO2 { + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <3587500>; + }; + }; + }; + }; +...
Signature · 1 line
2.20.1
PATCH v2 3/3 ARM: dts: qcom: msm8974-klte: Add max77826 pmic node
In reply to Iskren ChernevThis introduces the MAX77826 PMIC that powers some pheripherals on the klte, like the touchpad, touchkeys and camera.
--- .../boot/dts/qcom-msm8974-samsung-klte.dts | 110 ++++++++++++++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 11 ++ 2 files changed, 121 insertions(+)
arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +110 -0
@@ -21,4 +21,114 @@ serial@f991e000 { status = "ok"; }; + pinctrl@fd510000 { + i2c6_pins: i2c6 { + mux { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; + }; + }; + }; + + i2c@f9928000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; + }; };
arch/arm/boot/dts/qcom-msm8974.dtsi +11 -0
@@ -974,6 +974,17 @@ blsp_i2c3: i2c@f9925000 { #size-cells = <0>; }; + blsp_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp_i2c8: i2c@f9964000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1";
Signature · 1 line
2.26.0