Skip to contentSkip to conversation

perf tools: port UI from GTK2 to GTK4

PATCH In review Matt Turner 4 participants 15 messages Sep 9 – Sep 21 perf events

lore
Share & tools
lore
#0 lore raw

v8 cover perf tools: port UI from GTK2 to GTK4

GTK2 is long dead upstream and increasingly hard to keep building on current distros. This series ports perf's GTK-based report browser to GTK4 and fixes it up so it's actually loadable at runtime after the port.

Patch 1 does the mechanical port (build system, widget API changes), including the leftover-GTK2-call and signal-handling fixes that were a separate patch 3 in v4. Patch 2 fixes a runtime issue found after the port that prevented the browser from loading. Patch 3 fixes two stack buffer overflows in the hierarchy view that predate the port.

---
Changes in v8:
- Fix perf_gtk__add_hierarchy_entries() to restore hpp->buf/hpp->size unconditionally after formatting each entry, not just before
recursing into children: leaf entries left the buffer state
advanced, so the next sibling in the traversal inherited a
shrunk hpp->size and an already-advanced hpp->buf, eventually
running hpp->size to 0 and pointing bf past the end of the
stack buffer for the strim(bf) call (reported in v7 review)
- Link to v7: https://lore.kernel.org/r/[email protected]

Changes in v7:
- Add patch 3: fix two stack buffer overflows in the hierarchy view (perf_gtk__show_hierarchy()'s unbounded strcat() into a 512-byte buffer, and an advance_hpp() size_t underflow in perf_gtk__add_hierarchy_entries()). Both predate the GTK4 port
- Link to v6: https://lore.kernel.org/r/[email protected]

Changes in v6:
- Explicitly include <string.h> in annotate.c (strcpy()) and <stdarg.h>/<stdio.h> in hists.c (va_list, snprintf()) instead of relying on transitive includes, which isn't guaranteed on musl
- Link to v5: https://lore.kernel.org/r/[email protected]

Changes in v5:
- Fold v4's patch 3 into patch 1, since sigprocmask() only blocks delivery to the calling thread: it did nothing to stop the signal handler from running concurrently on another thread and doesn't make the handler's GSList calls async-signal-safe either
- Defer perf_gtk__exit() on SIGINT/SIGQUIT/SIGTERM to a GLib source via g_unix_signal_add() instead of running it straight out of a real signal handler, so it always runs on the main-loop thread, serialized with perf_gtk__error()'s updates to perf_gtk__error_loops, instead of racing them from arbitrary signal-handler context
- Keep a real handler for SIGSEGV/SIGFPE, since those are synchronous faults with no "later" to defer to, but pare it down to reporting and reraising the default disposition: there's no safe way to run
GTK/GLib code from the faulting context itself
- Link to v4: https://lore.kernel.org/r/[email protected]

Changes in v4:
- Fix gtk_widget_show()/gtk_widget_hide() calls left over from the GTK2
port: both were removed in GTK 4. Replace with gtk_widget_set_visible(), adding a small wrapper for the info-bar "response" signal callback
- Block SIGSEGV/SIGFPE/SIGINT/SIGQUIT/SIGTERM around the perf_gtk__error_loops list updates in perf_gtk__error(): the signal handler (perf_gtk__signal() -> perf_gtk__exit() -> perf_gtk__quit_error_dialog()) walks that same list and could fire mid-update, corrupting it
- Link to v3: https://lore.kernel.org/r/[email protected]

Changes in v3:
- Fix GMainLoop leak if perf_gtk__error() is called re-entrantly: track active loops in a list instead of a single global pointer
- Add explicit <stdarg.h>/<stdio.h> includes instead of relying on transitive inclusion, which musl doesn't guarantee
- Drop the gtk4-infobar feature check and HAVE_GTK_INFO_BAR_SUPPORT:
GtkInfoBar has been unconditionally available since well before GTK 4, and the check was failing outright due to its deprecation warning
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Fix error dialog's nested GMainLoop hanging if the parent window closes or a signal arrives while the dialog is open (quit from "destroy", not just "response")
- Fix build with GTK_INFO_BAR_SUPPORT: gtk_info_bar_get_content_area() is gone in GTK 4, use gtk_info_bar_add_child() instead
- Fix use-after-free in the progress dialog on manual close
- Fix reuse of an exhausted va_list in the vasprintf() failure path
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Matt Turner (3):
tools: port perf ui from GTK 2 to GTK 4
perf tools: make the GTK4 report browser actually loadable at runtime perf tools gtk: fix two hierarchy-view stack buffer overflows

 tools/build/Makefile.feature                     |  4 +-
 tools/build/feature/Makefile                     | 10 +--
 tools/build/feature/test-gtk2-infobar.c          | 12 ---
 tools/build/feature/{test-gtk2.c => test-gtk4.c} |  4 +-
 tools/perf/Documentation/perf-report.txt         |  2 +-
 tools/perf/Makefile                              |  2 +-
 tools/perf/Makefile.config                       | 27 +++----
 tools/perf/Makefile.perf                         |  6 +-
 tools/perf/builtin-annotate.c                    |  8 +-
 tools/perf/builtin-report.c                      |  8 +-
 tools/perf/scripts/install-build-deps.sh         |  4 +-
 tools/perf/tests/make                            |  4 +-
 tools/perf/ui/gtk/annotate.c                     | 36 ++++-----
 tools/perf/ui/gtk/browser.c                      | 96 ++++++++++++++++++-----
 tools/perf/ui/gtk/gtk.h                          | 16 ++--
 tools/perf/ui/gtk/hists.c                        | 72 +++++++++---------
 tools/perf/ui/gtk/progress.c                     | 40 +++++++---
 tools/perf/ui/gtk/setup.c                        |  5 +-
 tools/perf/ui/gtk/util.c                         | 97 ++++++++++++++----------
 tools/perf/ui/setup.c                            |  2 +-
 tools/perf/util/annotate.c                       | 11 +++
 tools/perf/util/annotate.h                       | 12 +--
 22 files changed, 278 insertions(+), 200 deletions(-)

---
base-commit: 9f0346dcbea363787186c94ef94dd01aaa215afa
change-id: 20260906-perf-gtk2-555ca04bb652

Best regards,

Signature · 1 line
Matt Turner <[email protected]>
#1 lore raw

PATCH v8 1/3 tools: port perf ui from GTK 2 to GTK 4

Port straight to GTK 4 rather than GTK 3, since GTK 4 is where new development happens and GTK 3 is old itself now.

GTK 4 drops GtkContainer, GdkScreen, and the gtk_main()/ gtk_dialog_run() family perf's GTK UI relied on. Containers get per-widget setters (gtk_box_append() and friends), monitor geometry comes from GdkMonitor instead of GdkScreen, and the main and error-dialog loops become explicit GMainLoops quit from the "close-request" and "response" signals. Widgets are visible by default now, so gtk_widget_show_all()/set_no_show_all() go away, and the remaining gtk_widget_show()/gtk_widget_hide() calls become gtk_widget_set_visible() (with a small wrapper where "response" needs to pass gtk_widget_hide() as a callback, since it no longer exists as a plain function).

gtk_ui_progress__finish() skips destroying a progress dialog that was never created, since gtk_window_destroy() asserts on NULL where the old widget destroy tolerated it. Two spots the GTK 2 to GTK 3 port had missed (builtin-annotate.c, ui/gtk/setup.c still using HAVE_GTK2_SUPPORT and gtk_main_quit()) are fixed to match.

Runtime fallout from the new signal-driven loops: the error dialog's nested loop hung if the parent window closed (GTK_DIALOG_DESTROY_WITH_PARENT destroys without emitting "response"); gtk_info_bar_get_content_area() is gone, breaking GTK_INFO_BAR_SUPPORT; the progress dialog's static widget pointers dangled after a manual close; perf_gtk__error() and the warning functions reused an exhausted va_list when vasprintf() failed.

The error loop is tracked in a list instead of a single pointer, since perf_gtk__error() can be called re-entrantly (the dialog isn't modal) and a lone global leaked the outer loop when that happened. The list is only ever touched from the main thread: perf_gtk__error() updates it while handling a dialog, and SIGINT/SIGQUIT/SIGTERM are deferred to a GLib source via g_unix_signal_add() rather than calling perf_gtk__exit() straight out of a real signal handler, so quitting on those signals is serialized with the list update instead of racing it from signal-handler context. SIGSEGV/SIGFPE keep a real handler, since they're synchronous faults with no "later" to defer to, but it's pared down to reporting and reraising the default disposition (perf_gtk__fatal_signal()): there's no safe way to run GTK/GLib code from the faulting context. stdarg.h, stdio.h, and string.h are now included explicitly where used (util.c, hists.c, annotate.c) rather than relying on transitive includes, which musl doesn't guarantee.

The gtk4-infobar feature check is dropped: GtkInfoBar has existed unconditionally since GTK 3.10, so the check can only ever pass, and it was failing outright here anyway since gtk_info_bar_new() is deprecated and the check treats deprecation warnings as errors. HAVE_GTK_INFO_BAR_SUPPORT and its statusbar-only fallback go away; the info bar is now built unconditionally.

---
 tools/build/Makefile.feature                     |  4 +-
 tools/build/feature/Makefile                     | 10 +--
 tools/build/feature/test-gtk2-infobar.c          | 12 ---
 tools/build/feature/{test-gtk2.c => test-gtk4.c} |  4 +-
 tools/perf/Documentation/perf-report.txt         |  2 +-
 tools/perf/Makefile                              |  2 +-
 tools/perf/Makefile.config                       | 22 +++---
 tools/perf/Makefile.perf                         |  6 +-
 tools/perf/builtin-annotate.c                    |  8 +-
 tools/perf/builtin-report.c                      |  8 +-
 tools/perf/scripts/install-build-deps.sh         |  4 +-
 tools/perf/tests/make                            |  4 +-
 tools/perf/ui/gtk/annotate.c                     | 36 ++++-----
 tools/perf/ui/gtk/browser.c                      | 96 ++++++++++++++++++-----
 tools/perf/ui/gtk/gtk.h                          | 16 ++--
 tools/perf/ui/gtk/hists.c                        | 43 +++++------
 tools/perf/ui/gtk/progress.c                     | 40 +++++++---
 tools/perf/ui/gtk/setup.c                        |  5 +-
 tools/perf/ui/gtk/util.c                         | 97 ++++++++++++++----------
 tools/perf/ui/setup.c                            |  2 +-
 20 files changed, 239 insertions(+), 182 deletions(-)
tools/build/Makefile.feature +2 -2
index 99eb0ea09537..4ec95c35a5c1 100644
@@ -113,8 +113,7 @@ FEATURE_TESTS_EXTRA :=                  \
          compile-x32                    \
          cplus-demangle                 \
          cxa-demangle                   \
-         gtk2                           \
-         gtk2-infobar                   \
+         gtk4                           \
          hello                          \
          babeltrace2-ctf-writer         \
          libcapstone                    \
@@ -143,6 +142,7 @@ endif
 FEATURE_DISPLAY ?=              \
          libdw                  \
          glibc                  \
+         gtk4                   \
          libelf                 \
          libnuma                \
          numa_num_possible_cpus \
tools/build/feature/Makefile +3 -7
index 7d165018116a..01c48e6ef021 100644
@@ -11,8 +11,7 @@ FILES=                                          \
          test-eventfd.bin                       \
          test-fortify-source.bin                \
          test-glibc.bin                         \
-         test-gtk2.bin                          \
-         test-gtk2-infobar.bin                  \
+         test-gtk4.bin                          \
          test-hello.bin                         \
          test-libbfd.bin                        \
 	 test-libbfd-threadsafe.bin      	\
@@ -240,11 +239,8 @@ $(OUTPUT)test-libcpupower.bin:
 $(OUTPUT)test-libtracefs.bin:
 	 $(BUILD) $(shell $(PKG_CONFIG) --cflags libtracefs 2>/dev/null) -ltracefs
 
-$(OUTPUT)test-gtk2.bin:
-	$(BUILD) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) -Wno-deprecated-declarations
-
-$(OUTPUT)test-gtk2-infobar.bin:
-	$(BUILD) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
+$(OUTPUT)test-gtk4.bin:
+	$(BUILD) $(shell $(PKG_CONFIG) --libs --cflags gtk4 2>/dev/null)
 
 grep-libs  = $(filter -l%,$(1))
 strip-libs = $(filter-out -l%,$(1))
tools/build/feature/test-gtk2-infobar.c deleted +0 -12
deleted file mode 100644
index b1b716dd5733..000000000000
@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#pragma GCC diagnostic ignored "-Wstrict-prototypes"
-#include <gtk/gtk.h>
-#pragma GCC diagnostic error "-Wstrict-prototypes"
-
-int main(int argc, char *argv[])
-{
-	gtk_init(&argc, &argv);
-	gtk_info_bar_new();
-
-	return 0;
-}
tools/build/feature/test-gtk4.c renamed from tools/build/feature/test-gtk2.c +2 -2
similarity index 76%
rename from tools/build/feature/test-gtk2.c
rename to tools/build/feature/test-gtk4.c
index 2aaf4bfc2055..b9520e7408b9 100644
@@ -3,9 +3,9 @@
 #include <gtk/gtk.h>
 #pragma GCC diagnostic error "-Wstrict-prototypes"
 
-int main(int argc, char *argv[])
+int main(void)
 {
-	gtk_init(&argc, &argv);
+	gtk_init();
 
         return 0;
 }
tools/perf/Documentation/perf-report.txt +1 -1
index 22f87eaa3279..7af9b3f81c06 100644
@@ -351,7 +351,7 @@ OPTIONS
 	requires a tty, if one is not present, as when piping to other
 	commands, the stdio interface is used.
 
---gtk:: Use the GTK2 interface.
+--gtk:: Use the GTK4 interface.
 
 -k::
 --vmlinux=<file>::
tools/perf/Makefile +1 -1
index 5b713837eede..56014106479a 100644
@@ -106,7 +106,7 @@ clean:
 # make -C tools/perf -f tests/make
 #
 build-test:
-	@$(MAKE) SHUF=1 -f tests/make REUSE_FEATURES_DUMP=1 MK=Makefile SET_PARALLEL=1 --no-print-directory tarpkg make_static make_with_gtk2 out
+	@$(MAKE) SHUF=1 -f tests/make REUSE_FEATURES_DUMP=1 MK=Makefile SET_PARALLEL=1 --no-print-directory tarpkg make_static make_with_gtk4 out
 
 build-test-tarball:
 	@$(MAKE) -f tests/make REUSE_FEATURES_DUMP=1 MK=Makefile SET_PARALLEL=1 --no-print-directory out
tools/perf/Makefile.config +9 -13
index 4d5993da9f94..3e59e2b7eaec 100644
@@ -774,20 +774,16 @@ ifndef NO_SLANG
   endif
 endif
 
-ifdef GTK2
-  FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
-  $(call feature_check,gtk2)
-  ifneq ($(feature-gtk2), 1)
-    $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev)
-    NO_GTK2 := 1
+ifdef GTK4
+  FLAGS_GTK4=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk4 2>/dev/null)
+  $(call feature_check,gtk4)
+  ifneq ($(feature-gtk4), 1)
+    $(warning GTK4 not found, disables GTK4 support. Please install gtk4-devel or libgtk-4-dev)
+    NO_GTK4 := 1
   else
-    $(call feature_check,gtk2-infobar)
-    ifeq ($(feature-gtk2-infobar), 1)
-      GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT
-    endif
-    CFLAGS += -DHAVE_GTK2_SUPPORT
-    GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null)
-    GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null)
+    CFLAGS += -DHAVE_GTK4_SUPPORT
+    GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk4 2>/dev/null)
+    GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk4 2>/dev/null)
     EXTLIBS += -ldl
   endif
 endif
tools/perf/Makefile.perf +3 -3
index 29cfd44c427f..2438b40eaaec 100644
@@ -49,7 +49,7 @@ include ../scripts/utilities.mak
 #
 # Define NO_SLANG if you do not want TUI support.
 #
-# Define GTK2 if you want GTK+ GUI support.
+# Define GTK4 if you want GTK+ GUI support.
 #
 # Define NO_DEMANGLE if you do not want C++ symbol demangling.
 #
@@ -473,7 +473,7 @@ ifneq ($(OUTPUT),)
   CFLAGS += -I$(OUTPUT)
 endif
 
-ifdef GTK2
+ifdef GTK4
   ALL_PROGRAMS += $(OUTPUT)libperf-gtk.so
   GTK_IN := $(OUTPUT)gtk-in.o
 endif
@@ -811,7 +811,7 @@ check: prepare
 
 ### Installation rules
 
-ifdef GTK2
+ifdef GTK4
 install-gtk: $(OUTPUT)libperf-gtk.so
 	$(call QUIET_INSTALL, 'GTK UI') \
 		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(libdir_SQ)'; \
tools/perf/builtin-annotate.c +4 -4
index 69cb72b2082a..15163e081a8c 100644
@@ -52,7 +52,7 @@ struct perf_annotate {
 	bool	   use_tui;
 #endif
 	bool	   use_stdio, use_stdio2;
-#ifdef HAVE_GTK2_SUPPORT
+#ifdef HAVE_GTK4_SUPPORT
 	bool	   use_gtk;
 #endif
 	bool	   skip_missing;
@@ -712,7 +712,7 @@ int cmd_annotate(int argc, const char **argv)
 	OPT_BOOLEAN('q', "quiet", &quiet, "do now show any warnings or messages"),
 	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
 		    "dump raw trace in ASCII"),
-#ifdef HAVE_GTK2_SUPPORT
+#ifdef HAVE_GTK4_SUPPORT
 	OPT_BOOLEAN(0, "gtk", &annotate.use_gtk, "Use the GTK interface"),
 #endif
 #ifdef HAVE_SLANG_SUPPORT
@@ -828,7 +828,7 @@ int cmd_annotate(int argc, const char **argv)
 	if (annotate_check_args() < 0)
 		return -EINVAL;
 
-#ifdef HAVE_GTK2_SUPPORT
+#ifdef HAVE_GTK4_SUPPORT
 	if (symbol_conf.show_nr_samples && annotate.use_gtk) {
 		pr_err("--show-nr-samples is not available in --gtk mode at this time\n");
 		return ret;
@@ -898,7 +898,7 @@ int cmd_annotate(int argc, const char **argv)
 	else if (annotate.use_tui)
 		use_browser = 1;
 #endif
-#ifdef HAVE_GTK2_SUPPORT
+#ifdef HAVE_GTK4_SUPPORT
 	else if (annotate.use_gtk)
 		use_browser = 2;
 #endif
tools/perf/builtin-report.c +4 -4
index 60d1f166629e..d14384c58466 100644
@@ -82,7 +82,7 @@ struct report {
 #ifdef HAVE_SLANG_SUPPORT
 	bool			use_tui;
 #endif
-#ifdef HAVE_GTK2_SUPPORT
+#ifdef HAVE_GTK4_SUPPORT
 	bool			use_gtk;
 #endif
 	bool			use_stdio;
@@ -1359,8 +1359,8 @@ int cmd_report(int argc, const char **argv)
 #ifdef HAVE_SLANG_SUPPORT
 	OPT_BOOLEAN(0, "tui", &report.use_tui, "Use the TUI interface"),
 #endif
-#ifdef HAVE_GTK2_SUPPORT
-	OPT_BOOLEAN(0, "gtk", &report.use_gtk, "Use the GTK2 interface"),
+#ifdef HAVE_GTK4_SUPPORT
+	OPT_BOOLEAN(0, "gtk", &report.use_gtk, "Use the GTK4 interface"),
 #endif
 	OPT_BOOLEAN(0, "stdio", &report.use_stdio,
 		    "Use the stdio interface"),
@@ -1710,7 +1710,7 @@ int cmd_report(int argc, const char **argv)
 	else if (report.use_tui)
 		use_browser = 1;
 #endif
-#ifdef HAVE_GTK2_SUPPORT
+#ifdef HAVE_GTK4_SUPPORT
 	else if (report.use_gtk)
 		use_browser = 2;
 #endif
tools/perf/scripts/install-build-deps.sh +2 -2
index d003e7fab2be..a601a5260c17 100755
@@ -199,8 +199,8 @@ fedora_pkg_for() {
 	# opt-in features, which a default build does not enable: the libbfd
 	# disassembler family (libbfd, libbfd-threadsafe, libbfd-liberty,
 	# disassembler-*, cplus-demangle), only linked on BUILD_NONDISTRO
-	# builds and deprecated in favor of capstone, GTK2, LIBPERL and
-	# LIBUNWIND support (ifdef GTK2 / ifdef LIBPERL / LIBUNWIND=1),
+	# builds and deprecated in favor of capstone, GTK4, LIBPERL and
+	# LIBUNWIND support (ifdef GTK4 / ifdef LIBPERL / LIBUNWIND=1),
 	# and CoreSight (ifdef CORESIGHT), are deliberately not mapped.
 	# libaio is not mapped either: its
 	# test uses the POSIX AIO API (aio.h, aio_*, -lrt), provided by
tools/perf/tests/make +2 -2
index d2c2f526e1db..202ab5501916 100644
@@ -95,7 +95,7 @@ make_no_babeltrace2 := NO_BABELTRACE2=1
 make_with_coresight := CORESIGHT=1
 make_no_sdt	    := NO_SDT=1
 make_no_libpfm4     := NO_LIBPFM4=1
-make_with_gtk2      := GTK2=1
+make_with_gtk4      := GTK4=1
 make_refcnt_check   := EXTRA_CFLAGS="-DREFCNT_CHECKING=1"
 make_tags           := tags
 make_cscope         := cscope
@@ -318,7 +318,7 @@ $(run):
 	$(call test,$@) && \
 	rm -rf $@ $$TMP_DEST || (cat $@ ; false)
 
-make_with_gtk2:
+make_with_gtk4:
 	$(call clean)
 	@TMP_DEST=$$(mktemp -d); \
 	cmd="cd $(PERF) && $(MAKE_F) $($@) $(PARALLEL_OPT) $(O_OPT) DESTDIR=$$TMP_DEST"; \
tools/perf/ui/gtk/annotate.c +15 -21
index 8920e298420a..094dfa045b77 100644
@@ -11,6 +11,7 @@
 #include "ui/helpline.h"
 #include <inttypes.h>
 #include <signal.h>
+#include <string.h>
 
 enum {
 	ANN_COL__PERCENT,
@@ -161,7 +162,7 @@ static int perf_gtk__annotate_symbol(GtkWidget *window, struct map_symbol *ms,
 			gtk_list_store_set(store, &iter, ANN_COL__LINE, s, -1);
 	}
 
-	gtk_container_add(GTK_CONTAINER(window), view);
+	gtk_scrolled_window_set_child(GTK_SCROLLED_WINDOW(window), view);
 
 	list_for_each_entry_safe(pos, n, &notes->src->source, al.node) {
 		list_del_init(&pos->al.node);
@@ -205,40 +206,34 @@ static int symbol__gtk_annotate(struct map_symbol *ms, struct evsel *evsel,
 		GtkWidget *infobar;
 		GtkWidget *statbar;
 
-		signal(SIGSEGV, perf_gtk__signal);
-		signal(SIGFPE,  perf_gtk__signal);
-		signal(SIGINT,  perf_gtk__signal);
-		signal(SIGQUIT, perf_gtk__signal);
-		signal(SIGTERM, perf_gtk__signal);
+		signal(SIGSEGV, perf_gtk__fatal_signal);
+		signal(SIGFPE,  perf_gtk__fatal_signal);
+		perf_gtk__install_quit_signals();
 
-		window = gtk_window_new(GTK_WINDOW_TOPLEVEL);
+		window = gtk_window_new();
 		gtk_window_set_title(GTK_WINDOW(window), "perf annotate");
 
-		g_signal_connect(window, "delete_event", gtk_main_quit, NULL);
-
 		pgctx = perf_gtk__activate_context(window);
 		if (!pgctx)
 			return -1;
 
-		vbox = gtk_vbox_new(FALSE, 0);
+		vbox = gtk_box_new(GTK_ORIENTATION_VERTICAL, 0);
 		notebook = gtk_notebook_new();
 		pgctx->notebook = notebook;
 
-		gtk_box_pack_start(GTK_BOX(vbox), notebook, TRUE, TRUE, 0);
+		gtk_widget_set_vexpand(notebook, TRUE);
+		gtk_box_append(GTK_BOX(vbox), notebook);
 
 		infobar = perf_gtk__setup_info_bar();
-		if (infobar) {
-			gtk_box_pack_start(GTK_BOX(vbox), infobar,
-					   FALSE, FALSE, 0);
-		}
+		gtk_box_append(GTK_BOX(vbox), infobar);
 
 		statbar = perf_gtk__setup_statusbar();
-		gtk_box_pack_start(GTK_BOX(vbox), statbar, FALSE, FALSE, 0);
+		gtk_box_append(GTK_BOX(vbox), statbar);
 
-		gtk_container_add(GTK_CONTAINER(window), vbox);
+		gtk_window_set_child(GTK_WINDOW(window), vbox);
 	}
 
-	scrolled_window = gtk_scrolled_window_new(NULL, NULL);
+	scrolled_window = gtk_scrolled_window_new();
 	tab_label = gtk_label_new(sym->name);
 
 	gtk_scrolled_window_set_policy(GTK_SCROLLED_WINDOW(scrolled_window),
@@ -267,12 +262,11 @@ void perf_gtk__show_annotations(void)
 		return;
 
 	window = pgctx->main_window;
-	gtk_widget_show_all(window);
 
 	perf_gtk__resize_window(window);
-	gtk_window_set_position(GTK_WINDOW(window), GTK_WIN_POS_CENTER);
+	gtk_widget_set_visible(window, TRUE);
 
-	gtk_main();
+	perf_gtk__run_main_loop(window);
 
 	perf_gtk__deactivate_context(&pgctx);
 }
tools/perf/ui/gtk/browser.c +79 -17

144 lines not on this page · raw message

tools/perf/ui/gtk/gtk.h +5 -11
index a2b497f03fd6..6b37fd9943c9 100644
@@ -13,10 +13,8 @@ struct perf_gtk_context {
 	GtkWidget *main_window;
 	GtkWidget *notebook;
 
-#ifdef HAVE_GTK_INFO_BAR_SUPPORT
 	GtkWidget *info_bar;
 	GtkWidget *message_label;
-#endif
 	GtkWidget *statbar;
 	guint statbar_ctx_id;
 };
@@ -38,19 +36,15 @@ void perf_gtk__init_helpline(void);
 void gtk_ui_progress__init(void);
 void perf_gtk__init_hpp(void);
 
-void perf_gtk__signal(int sig);
+void perf_gtk__install_quit_signals(void);
+void perf_gtk__fatal_signal(int sig);
 void perf_gtk__resize_window(GtkWidget *window);
+void perf_gtk__run_main_loop(GtkWidget *window);
+void perf_gtk__quit_main_loop(void);
+void perf_gtk__quit_error_dialog(void);
 const char *perf_gtk__get_percent_color(double percent);
 GtkWidget *perf_gtk__setup_statusbar(void);
-
-#ifdef HAVE_GTK_INFO_BAR_SUPPORT
 GtkWidget *perf_gtk__setup_info_bar(void);
-#else
-static inline GtkWidget *perf_gtk__setup_info_bar(void)
-{
-	return NULL;
-}
-#endif
 
 struct evsel;
 struct evlist;
tools/perf/ui/gtk/hists.c +17 -26

103 lines not on this page · raw message

tools/perf/ui/gtk/progress.c +28 -12
index eea6fcde518a..770f9251b54b 100644
@@ -1,49 +1,65 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <inttypes.h>
+#include <stdio.h>
 
 #include "gtk.h"
 #include "../progress.h"
+#include <linux/compiler.h>
 
 static GtkWidget *dialog;
 static GtkWidget *progress;
 
+static void gtk_ui_progress__destroyed(GtkWidget *widget __maybe_unused,
+					gpointer data __maybe_unused)
+{
+	dialog = NULL;
+	progress = NULL;
+}
+
 static void gtk_ui_progress__update(struct ui_progress *p)
 {
 	double fraction = p->total ? 1.0 * p->curr / p->total : 0.0;
 	char buf[1024];
 
 	if (dialog == NULL) {
-		GtkWidget *vbox = gtk_vbox_new(TRUE, 5);
+		GtkWidget *vbox = gtk_box_new(GTK_ORIENTATION_VERTICAL, 5);
 		GtkWidget *label = gtk_label_new(p->title);
 
-		dialog = gtk_window_new(GTK_WINDOW_TOPLEVEL);
+		dialog = gtk_window_new();
 		progress = gtk_progress_bar_new();
 
-		gtk_box_pack_start(GTK_BOX(vbox), label, TRUE, FALSE, 3);
-		gtk_box_pack_start(GTK_BOX(vbox), progress, TRUE, TRUE, 3);
+		gtk_widget_set_vexpand(label, TRUE);
+		gtk_box_append(GTK_BOX(vbox), label);
+		gtk_widget_set_vexpand(progress, TRUE);
+		gtk_box_append(GTK_BOX(vbox), progress);
 
-		gtk_container_add(GTK_CONTAINER(dialog), vbox);
+		gtk_window_set_child(GTK_WINDOW(dialog), vbox);
+
+		g_signal_connect(dialog, "destroy",
+				 G_CALLBACK(gtk_ui_progress__destroyed), NULL);
 
 		gtk_window_set_title(GTK_WINDOW(dialog), "perf");
-		gtk_window_resize(GTK_WINDOW(dialog), 300, 80);
-		gtk_window_set_position(GTK_WINDOW(dialog), GTK_WIN_POS_CENTER);
+		gtk_window_set_default_size(GTK_WINDOW(dialog), 300, 80);
 
-		gtk_widget_show_all(dialog);
+		gtk_widget_set_visible(dialog, TRUE);
 	}
 
 	gtk_progress_bar_set_fraction(GTK_PROGRESS_BAR(progress), fraction);
 	snprintf(buf, sizeof(buf), "%"PRIu64" / %"PRIu64, p->curr, p->total);
 	gtk_progress_bar_set_text(GTK_PROGRESS_BAR(progress), buf);
 
-	/* we didn't call gtk_main yet, so do it manually */
-	while (gtk_events_pending())
-		gtk_main_iteration();
+	/* we didn't start a main loop yet, so pump events manually */
+	while (g_main_context_pending(NULL))
+		g_main_context_iteration(NULL, FALSE);
 }
 
 static void gtk_ui_progress__finish(void)
 {
+	if (dialog == NULL)
+		return;
+
 	/* this will also destroy all of its children */
-	gtk_widget_destroy(dialog);
+	gtk_window_destroy(GTK_WINDOW(dialog));
 
 	dialog = NULL;
 }
tools/perf/ui/gtk/setup.c +3 -2
index f5eee4d66873..9b44f3719747 100644
@@ -12,7 +12,7 @@ int perf_gtk__init(void)
 	gtk_ui_progress__init();
 	perf_gtk__init_hpp();
 
-	return gtk_init_check(NULL, NULL) ? 0 : -1;
+	return gtk_init_check() ? 0 : -1;
 }
 
 void perf_gtk__exit(bool wait_for_ok __maybe_unused)
@@ -20,5 +20,6 @@ void perf_gtk__exit(bool wait_for_ok __maybe_unused)
 	if (!perf_gtk__is_active_context(pgctx))
 		return;
 	perf_error__unregister(&perf_gtk_eops);
-	gtk_main_quit();
+	perf_gtk__quit_error_dialog();
+	perf_gtk__quit_main_loop();
 }
tools/perf/ui/gtk/util.c +58 -39

152 lines not on this page · raw message

tools/perf/ui/setup.c +1 -1
index ff800047e697..d887346c7a63 100644
@@ -14,7 +14,7 @@ int use_browser = -1;
 
 #define PERF_GTK_DSO "libperf-gtk.so"
 
-#ifdef HAVE_GTK2_SUPPORT
+#ifdef HAVE_GTK4_SUPPORT
 
 static int setup_gtk_browser(void)
 {
Signature · 1 line
2.54.0
#2 lore raw

Re: [PATCH v8 1/3] tools: port perf ui from GTK 2 to GTK 4

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 15 lines

Port straight to GTK 4 rather than GTK 3, since GTK 4 is where new development happens and GTK 3 is old itself now.

GTK 4 drops GtkContainer, GdkScreen, and the gtk_main()/ gtk_dialog_run() family perf's GTK UI relied on. Containers get per-widget setters (gtk_box_append() and friends), monitor geometry comes from GdkMonitor instead of GdkScreen, and the main and error-dialog loops become explicit GMainLoops quit from the "close-request" and "response" signals. Widgets are visible by default now, so gtk_widget_show_all()/set_no_show_all() go away, and the remaining gtk_widget_show()/gtk_widget_hide() calls become gtk_widget_set_visible() (with a small wrapper where "response" needs to pass gtk_widget_hide() as a callback, since it no longer exists as a plain function).

Quoted 6 lines

[ ... ]
and the check treats deprecation warnings as errors. HAVE_GTK_INFO_BAR_SUPPORT and its statusbar-only fallback go away; the info bar is now built unconditionally.

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=1
#3 lore raw

PATCH v8 2/3 perf tools: make the GTK4 report browser actually loadable at runtime

In reply to Matt Turner

perf report --gtk dlopen()s libperf-gtk.so, which expects to resolve symbols back against the running perf binary (callchain_param, symbol_conf, evsel__name, and friends live in perf, not the plugin). Two things broke that after the GTK 4 port:

perf never passed -rdynamic, so none of its symbols were in its dynamic symbol table for a dlopen()ed plugin to find. Add -rdynamic to LDFLAGS when GTK4 support is enabled.

annotated_source__hist_entry() was a static inline in annotate.h, so ui/gtk/annotate.c calling it pulled hashmap__find()'s expansion, hashmap_find(), into libperf-gtk.so as an undefined symbol. The only hashmap_find perf links against normally is libbpf's internal one (tools/lib/bpf/hashmap.c), built with -fvisibility=hidden, so it can never be exported to a dlopen()ed plugin regardless of LDFLAGS. Move annotated_source__hist_entry() into annotate.c as an ordinary exported function, so the plugin depends on it the same way it already depends on evsel__group_desc() and friends.

With both fixes, a default 'make GTK4=1' build (libbpf statically linked) can dlopen() libperf-gtk.so and open the report browser without NO_LIBBPF=1 or manual LDFLAGS. Verified with perf report --gtk against real perf.data on a GTK4 desktop.

---
 tools/perf/Makefile.config |  5 +++++
 tools/perf/util/annotate.c | 11 +++++++++++
 tools/perf/util/annotate.h | 12 ++----------
 3 files changed, 18 insertions(+), 10 deletions(-)
tools/perf/Makefile.config +5 -0
index 3e59e2b7eaec..4ee7393a39f9 100644
@@ -785,6 +785,11 @@ ifdef GTK4
     GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk4 2>/dev/null)
     GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk4 2>/dev/null)
     EXTLIBS += -ldl
+    # libperf-gtk.so is dlopen()ed at runtime and calls back into
+    # symbols defined in the perf binary itself (callchain_param,
+    # symbol_conf, evsel__name, ...): perf needs to export those
+    # dynamically for the plugin to resolve them.
+    LDFLAGS += -rdynamic
   endif
 endif
 
tools/perf/util/annotate.c +11 -0
index df70e95a8470..123b6d5fcea7 100644
@@ -145,6 +145,17 @@ static int annotated_source__alloc_histograms(struct annotated_source *src,
 	return src->histograms ? 0 : -1;
 }
 
+struct sym_hist_entry *
+annotated_source__hist_entry(struct annotated_source *src, const struct evsel *evsel, u64 offset)
+{
+	struct sym_hist_entry *entry;
+	long key = offset << 16 | evsel->core.idx;
+
+	if (!hashmap__find(src->samples, key, &entry))
+		return NULL;
+	return entry;
+}
+
 void symbol__annotate_zero_histograms(struct symbol *sym)
 {
 	struct annotation *notes = symbol__annotation(sym);
tools/perf/util/annotate.h +2 -10
index fa08d09b80f7..40038a3779d4 100644
@@ -406,16 +406,8 @@ static inline struct sym_hist *annotation__histogram(struct annotation *notes,
 	return annotated_source__histogram(notes->src, evsel);
 }
 
-static inline struct sym_hist_entry *
-annotated_source__hist_entry(struct annotated_source *src, const struct evsel *evsel, u64 offset)
-{
-	struct sym_hist_entry *entry;
-	long key = offset << 16 | evsel->core.idx;
-
-	if (!hashmap__find(src->samples, key, &entry))
-		return NULL;
-	return entry;
-}
+struct sym_hist_entry *
+annotated_source__hist_entry(struct annotated_source *src, const struct evsel *evsel, u64 offset);
 
 static inline struct annotation *symbol__annotation(struct symbol *sym)
 {
Signature · 1 line
2.54.0
#4 lore raw

Re: [PATCH v8 2/3] perf tools: make the GTK4 report browser actually loadable at runtime

Sashiko has reviewed this patch and found no issues. It looks great!
Quoted 19 lines

perf report --gtk dlopen()s libperf-gtk.so, which expects to resolve symbols back against the running perf binary (callchain_param, symbol_conf, evsel__name, and friends live in perf, not the plugin). Two things broke that after the GTK 4 port:

perf never passed -rdynamic, so none of its symbols were in its dynamic symbol table for a dlopen()ed plugin to find. Add -rdynamic to LDFLAGS when GTK4 support is enabled.

annotated_source__hist_entry() was a static inline in annotate.h, so ui/gtk/annotate.c calling it pulled hashmap__find()'s expansion, hashmap_find(), into libperf-gtk.so as an undefined symbol. The only hashmap_find perf links against normally is libbpf's internal one (tools/lib/bpf/hashmap.c), built with -fvisibility=hidden, so it can never be exported to a dlopen()ed plugin regardless of LDFLAGS. Move annotated_source__hist_entry() into annotate.c as an ordinary exported function, so the plugin depends on it the same way it already depends on evsel__group_desc() and friends.

Quoted 6 lines

With both fixes, a default 'make GTK4=1' build (libbpf statically linked) can dlopen() libperf-gtk.so and open the report browser without NO_LIBBPF=1 or manual LDFLAGS. Verified with perf report --gtk against real perf.data on a GTK4 desktop.

Sashiko has reviewed this patch and found no issues. It looks great!

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=2
#5 lore raw

PATCH v8 3/3 perf tools gtk: fix two hierarchy-view stack buffer overflows

In reply to Matt Turner

perf_gtk__show_hierarchy() builds a merged column header for the hierarchy view with unbounded strcat() calls into a 512-byte stack buffer. The pieces being appended come from tracepoint field names and sort-key headers in perf.data, so a file with enough dynamic sort keys or long enough field names overflows the buffer.

perf_gtk__add_hierarchy_entries() has a related bug in the loop that formats each entry's value columns. fmt->entry()/fmt->color() return via scnprintf(), so ret is clamped to at most hpp->size - 1, but advance_hpp(hpp, ret + 2) doesn't clamp: when ret hits that maximum, ret + 2 exceeds hpp->size by one, and hpp->size (size_t) underflows to roughly SIZE_MAX. The next iteration's fmt->entry() then writes into the caller's stack buffer using that bogus size, a second overflow.

That same loop also saves bf/size at the top of each iteration but only restored hpp->buf/hpp->size to them before recursing into non-leaf children. Leaf entries left the buffer state advanced from the format loop, so the next sibling in the traversal inherited a shrunk hpp->size and an already-advanced hpp->buf, eventually running hpp->size down to 0 and pointing bf past the end of the stack buffer for the strim(bf) call.

Fix the header builder by tracking the write offset and using scnprintf() for each append, same pattern already used elsewhere in this file. Fix the entry loop by clamping the amount passed to advance_hpp() to what's actually left in the buffer, and by restoring hpp->buf/hpp->size unconditionally after formatting each entry instead of only before recursing.

Both bugs predate the perf GTK UI's move to GTK 4; neither function is touched by that port.

---
 tools/perf/ui/gtk/hists.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)
tools/perf/ui/gtk/hists.c +21 -8
index 716dcf02bd0e..80df3fec8ea1 100644
@@ -449,7 +449,7 @@ static void perf_gtk__add_hierarchy_entries(struct hists *hists,
 		bf = hpp->buf;
 		size = hpp->size;
 		perf_hpp_list__for_each_format(he->hpp_list, fmt) {
-			int ret;
+			int ret, inc;
 
 			if (fmt->color)
 				ret = fmt->color(fmt, hpp, he);
@@ -457,15 +457,26 @@ static void perf_gtk__add_hierarchy_entries(struct hists *hists,
 				ret = fmt->entry(fmt, hpp, he);
 
 			snprintf(hpp->buf + ret, hpp->size - ret, "  ");
-			advance_hpp(hpp, ret + 2);
+			/*
+			 * ret can be as large as hpp->size - 1, so ret + 2
+			 * can exceed hpp->size. advance_hpp() doesn't clamp,
+			 * so passing that through would underflow the
+			 * size_t hpp->size and let a later fmt->entry() in
+			 * this loop write past the end of the caller's
+			 * stack buffer.
+			 */
+			inc = ret + 2;
+			if (inc > (int)hpp->size)
+				inc = hpp->size;
+			advance_hpp(hpp, inc);
 		}
 
 		gtk_tree_store_set(store, &iter, col_idx, strim(bf), -1);
 
-		if (!he->leaf) {
-			hpp->buf = bf;
-			hpp->size = size;
+		hpp->buf = bf;
+		hpp->size = size;
 
+		if (!he->leaf) {
 			perf_gtk__add_hierarchy_entries(hists, &he->hroot_out,
 							store, &iter, hpp,
 							min_pcnt);
@@ -505,6 +516,7 @@ static void perf_gtk__show_hierarchy(GtkWidget *window, struct hists *hists,
 	GtkWidget *view;
 	int col_idx;
 	int nr_cols = 0;
+	int ret;
 	char s[512];
 	char buf[512];
 	bool first_node, first_col;
@@ -541,9 +553,10 @@ static void perf_gtk__show_hierarchy(GtkWidget *window, struct hists *hists,
 	/* construct merged column header since sort keys share single column */
 	buf[0] = '\0';
 	first_node = true;
+	ret = 0;
 	list_for_each_entry_continue(fmt_node, &hists->hpp_formats, list) {
 		if (!first_node)
-			strcat(buf, " / ");
+			ret += scnprintf(buf + ret, sizeof(buf) - ret, " / ");
 		first_node = false;
 
 		first_col = true;
@@ -552,11 +565,11 @@ static void perf_gtk__show_hierarchy(GtkWidget *window, struct hists *hists,
 				continue;
 
 			if (!first_col)
-				strcat(buf, "+");
+				ret += scnprintf(buf + ret, sizeof(buf) - ret, "+");
 			first_col = false;
 
 			fmt->header(fmt, &hpp, hists, 0, NULL);
-			strcat(buf, strim(hpp.buf));
+			ret += scnprintf(buf + ret, sizeof(buf) - ret, "%s", strim(hpp.buf));
 		}
 	}
 
Signature · 1 line
2.54.0
#6 lore raw

Re: [PATCH v8 3/3] perf tools gtk: fix two hierarchy-view stack buffer overflows

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:

Pre-existing issues:
- [High] Potential stack buffer overflow when writing to col_types array if nr_cols exceeds MAX_COLUMNS. --

commit d31e2f191655501641db6dac561539e4edaedb03
Author: Matt Turner <[email protected]>

perf tools gtk: fix two hierarchy-view stack buffer overflows

This commit fixes two stack buffer overflows in the perf GTK hierarchy view. It tracks the write offset and uses scnprintf() to prevent buffer overflows when building merged column headers. It also clamps the value passed to advance_hpp() to prevent size underflows during entry formatting.

Quoted 4 lines
tools/perf/ui/gtk/hists.c +0 -0
index 716dcf02bd0e8..80df3fec8ea13 100644

[ ... ]

tools/perf/ui/gtk/hists.c static void perf_gtk__show_hierarchy(GtkWidget *window, struct hists *hists, · line 522

Quoted 8 lines
tools/perf/ui/gtk/hists.c +1 -0
@@ -505,6 +516,7 @@ static void perf_gtk__show_hierarchy(GtkWidget *window, struct hists *hists,
 	GtkWidget *view;
 	int col_idx;
 	int nr_cols = 0;
+	int ret;
 	char s[512];
 	char buf[512];
 	bool first_node, first_col;

[Severity: High]
This is a pre-existing issue, but while looking at perf_gtk__show_hierarchy(), can this code overflow the col_types[] array?

Further down in perf_gtk__show_hierarchy(), the code does:

	hists__for_each_format(hists, fmt) {
		if (perf_hpp__is_sort_entry(fmt) ||
		    perf_hpp__is_dynamic_entry(fmt))
			break;

		col_types[nr_cols++] = G_TYPE_STRING;
	}
	col_types[nr_cols++] = G_TYPE_STRING;

Since col_types is declared as GType col_types[MAX_COLUMNS], if a perf.data file defines a large number of overhead formats (for example, from an event group with >= 32 events), could nr_cols exceed MAX_COLUMNS and write past the end of the stack buffer?

Signature · 1 line
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=3
#7 lore raw
In reply to Matt Turner
Quoted 10 lines · Matt Turner

GTK2 is long dead upstream and increasingly hard to keep building on current distros. This series ports perf's GTK-based report browser to GTK4 and fixes it up so it's actually loadable at runtime after the port.

Patch 1 does the mechanical port (build system, widget API changes), including the leftover-GTK2-call and signal-handling fixes that were a separate patch 3 in v4. Patch 2 fixes a runtime issue found after the port that prevented the browser from loading. Patch 3 fixes two stack buffer overflows in the hierarchy view that predate the port.

I'm tentatively merging this, will test build on my distro container set and perform some testing, thanks for working on this!

- Arnaldo

Quoted 108 lines

---
Changes in v8:
- Fix perf_gtk__add_hierarchy_entries() to restore hpp->buf/hpp->size unconditionally after formatting each entry, not just before
recursing into children: leaf entries left the buffer state
advanced, so the next sibling in the traversal inherited a
shrunk hpp->size and an already-advanced hpp->buf, eventually
running hpp->size to 0 and pointing bf past the end of the
stack buffer for the strim(bf) call (reported in v7 review)
- Link to v7: https://lore.kernel.org/r/[email protected]

Changes in v7:
- Add patch 3: fix two stack buffer overflows in the hierarchy view (perf_gtk__show_hierarchy()'s unbounded strcat() into a 512-byte buffer, and an advance_hpp() size_t underflow in perf_gtk__add_hierarchy_entries()). Both predate the GTK4 port
- Link to v6: https://lore.kernel.org/r/[email protected]

Changes in v6:
- Explicitly include <string.h> in annotate.c (strcpy()) and <stdarg.h>/<stdio.h> in hists.c (va_list, snprintf()) instead of relying on transitive includes, which isn't guaranteed on musl
- Link to v5: https://lore.kernel.org/r/[email protected]

Changes in v5:
- Fold v4's patch 3 into patch 1, since sigprocmask() only blocks delivery to the calling thread: it did nothing to stop the signal handler from running concurrently on another thread and doesn't make the handler's GSList calls async-signal-safe either
- Defer perf_gtk__exit() on SIGINT/SIGQUIT/SIGTERM to a GLib source via g_unix_signal_add() instead of running it straight out of a real signal handler, so it always runs on the main-loop thread, serialized with perf_gtk__error()'s updates to perf_gtk__error_loops, instead of racing them from arbitrary signal-handler context
- Keep a real handler for SIGSEGV/SIGFPE, since those are synchronous faults with no "later" to defer to, but pare it down to reporting and reraising the default disposition: there's no safe way to run
GTK/GLib code from the faulting context itself
- Link to v4: https://lore.kernel.org/r/[email protected]

Changes in v4:
- Fix gtk_widget_show()/gtk_widget_hide() calls left over from the GTK2
port: both were removed in GTK 4. Replace with gtk_widget_set_visible(), adding a small wrapper for the info-bar "response" signal callback
- Block SIGSEGV/SIGFPE/SIGINT/SIGQUIT/SIGTERM around the perf_gtk__error_loops list updates in perf_gtk__error(): the signal handler (perf_gtk__signal() -> perf_gtk__exit() -> perf_gtk__quit_error_dialog()) walks that same list and could fire mid-update, corrupting it
- Link to v3: https://lore.kernel.org/r/[email protected]

Changes in v3:
- Fix GMainLoop leak if perf_gtk__error() is called re-entrantly: track active loops in a list instead of a single global pointer
- Add explicit <stdarg.h>/<stdio.h> includes instead of relying on transitive inclusion, which musl doesn't guarantee
- Drop the gtk4-infobar feature check and HAVE_GTK_INFO_BAR_SUPPORT:
GtkInfoBar has been unconditionally available since well before GTK 4, and the check was failing outright due to its deprecation warning
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Fix error dialog's nested GMainLoop hanging if the parent window closes or a signal arrives while the dialog is open (quit from "destroy", not just "response")
- Fix build with GTK_INFO_BAR_SUPPORT: gtk_info_bar_get_content_area() is gone in GTK 4, use gtk_info_bar_add_child() instead
- Fix use-after-free in the progress dialog on manual close
- Fix reuse of an exhausted va_list in the vasprintf() failure path
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Matt Turner (3):
tools: port perf ui from GTK 2 to GTK 4
perf tools: make the GTK4 report browser actually loadable at runtime perf tools gtk: fix two hierarchy-view stack buffer overflows

 tools/build/Makefile.feature                     |  4 +-
 tools/build/feature/Makefile                     | 10 +--
 tools/build/feature/test-gtk2-infobar.c          | 12 ---
 tools/build/feature/{test-gtk2.c => test-gtk4.c} |  4 +-
 tools/perf/Documentation/perf-report.txt         |  2 +-
 tools/perf/Makefile                              |  2 +-
 tools/perf/Makefile.config                       | 27 +++----
 tools/perf/Makefile.perf                         |  6 +-
 tools/perf/builtin-annotate.c                    |  8 +-
 tools/perf/builtin-report.c                      |  8 +-
 tools/perf/scripts/install-build-deps.sh         |  4 +-
 tools/perf/tests/make                            |  4 +-
 tools/perf/ui/gtk/annotate.c                     | 36 ++++-----
 tools/perf/ui/gtk/browser.c                      | 96 ++++++++++++++++++-----
 tools/perf/ui/gtk/gtk.h                          | 16 ++--
 tools/perf/ui/gtk/hists.c                        | 72 +++++++++---------
 tools/perf/ui/gtk/progress.c                     | 40 +++++++---
 tools/perf/ui/gtk/setup.c                        |  5 +-
 tools/perf/ui/gtk/util.c                         | 97 ++++++++++++++----------
 tools/perf/ui/setup.c                            |  2 +-
 tools/perf/util/annotate.c                       | 11 +++
 tools/perf/util/annotate.h                       | 12 +--
 22 files changed, 278 insertions(+), 200 deletions(-)

---
base-commit: 9f0346dcbea363787186c94ef94dd01aaa215afa
change-id: 20260906-perf-gtk2-555ca04bb652

Best regards,

Signature · 1 line
Matt Turner <[email protected]>
#8 lore raw
Quoted 6 lines · Arnaldo Carvalho de Melo
Quoted 5 lines · Matt Turner

GTK2 is long dead upstream and increasingly hard to keep building on current distros. This series ports perf's GTK-based report browser to GTK4 and fixes it up so it's actually loadable at runtime after the port.

Quoted 8 lines
Quoted 5 lines

Patch 1 does the mechanical port (build system, widget API changes), including the leftover-GTK2-call and signal-handling fixes that were a separate patch 3 in v4. Patch 2 fixes a runtime issue found after the port that prevented the browser from loading. Patch 3 fixes two stack buffer overflows in the hierarchy view that predate the port.

I'm tentatively merging this, will test build on my distro container set and perform some testing, thanks for working on this!

Some fuzz applying the first patch in the series:

⬢ [acme@toolbx perf-tools-next]$ patch -p1 < ./v8_20260908_mattst88_perf_tools_port_ui_from_gtk2_to_gtk4.mbx patching file tools/build/Makefile.feature
patching file tools/build/feature/Makefile
patching file tools/build/feature/test-gtk2-infobar.c
patching file tools/build/feature/test-gtk4.c (renamed from tools/build/feature/test-gtk2.c) patching file tools/perf/Documentation/perf-report.txt
Hunk #1 succeeded at 354 with fuzz 2 (offset 3 lines).
patching file tools/perf/Makefile
patching file tools/perf/Makefile.config
patching file tools/perf/Makefile.perf
patching file tools/perf/builtin-annotate.c
Hunk #1 succeeded at 61 (offset 9 lines).
Hunk #2 succeeded at 721 (offset 9 lines).
Hunk #3 succeeded at 840 (offset 12 lines).
Hunk #4 succeeded at 910 (offset 12 lines).
patching file tools/perf/builtin-report.c
Hunk #1 succeeded at 83 (offset 1 line).
Hunk #2 succeeded at 1360 (offset 1 line).
Hunk #3 succeeded at 1714 (offset 4 lines).
patching file tools/perf/scripts/install-build-deps.sh
patching file tools/perf/tests/make
patching file tools/perf/ui/gtk/annotate.c
patching file tools/perf/ui/gtk/browser.c
patching file tools/perf/ui/gtk/gtk.h
patching file tools/perf/ui/gtk/hists.c
patching file tools/perf/ui/gtk/progress.c
patching file tools/perf/ui/gtk/setup.c
patching file tools/perf/ui/gtk/util.c
patching file tools/perf/ui/setup.c
⬢ [acme@toolbx perf-tools-next]$

I fixed it up quickly, now lets see the rest...

- Arnaldo

#9 lore raw
Quoted 49 lines · Arnaldo Carvalho de Melo
Quoted 6 lines · Arnaldo Carvalho de Melo
Quoted 5 lines · Matt Turner

GTK2 is long dead upstream and increasingly hard to keep building on current distros. This series ports perf's GTK-based report browser to GTK4 and fixes it up so it's actually loadable at runtime after the port.

Quoted 8 lines
Quoted 5 lines

Patch 1 does the mechanical port (build system, widget API changes), including the leftover-GTK2-call and signal-handling fixes that were a separate patch 3 in v4. Patch 2 fixes a runtime issue found after the port that prevented the browser from loading. Patch 3 fixes two stack buffer overflows in the hierarchy view that predate the port.

I'm tentatively merging this, will test build on my distro container set and perform some testing, thanks for working on this!

Some fuzz applying the first patch in the series:

⬢ [acme@toolbx perf-tools-next]$ patch -p1 < ./v8_20260908_mattst88_perf_tools_port_ui_from_gtk2_to_gtk4.mbx patching file tools/build/Makefile.feature
patching file tools/build/feature/Makefile
patching file tools/build/feature/test-gtk2-infobar.c
patching file tools/build/feature/test-gtk4.c (renamed from tools/build/feature/test-gtk2.c) patching file tools/perf/Documentation/perf-report.txt
Hunk #1 succeeded at 354 with fuzz 2 (offset 3 lines).
patching file tools/perf/Makefile
patching file tools/perf/Makefile.config
patching file tools/perf/Makefile.perf
patching file tools/perf/builtin-annotate.c
Hunk #1 succeeded at 61 (offset 9 lines).
Hunk #2 succeeded at 721 (offset 9 lines).
Hunk #3 succeeded at 840 (offset 12 lines).
Hunk #4 succeeded at 910 (offset 12 lines).
patching file tools/perf/builtin-report.c
Hunk #1 succeeded at 83 (offset 1 line).
Hunk #2 succeeded at 1360 (offset 1 line).
Hunk #3 succeeded at 1714 (offset 4 lines).
patching file tools/perf/scripts/install-build-deps.sh
patching file tools/perf/tests/make
patching file tools/perf/ui/gtk/annotate.c
patching file tools/perf/ui/gtk/browser.c
patching file tools/perf/ui/gtk/gtk.h
patching file tools/perf/ui/gtk/hists.c
patching file tools/perf/ui/gtk/progress.c
patching file tools/perf/ui/gtk/setup.c
patching file tools/perf/ui/gtk/util.c
patching file tools/perf/ui/setup.c
⬢ [acme@toolbx perf-tools-next]$

Quoted 1 line

I fixed it up quickly, now lets see the rest...

Trying to build with it with just the first patch in this series in it correctly discovers that the gtk4 devel files are not available but then proceed to try to include gtk code and thus fail, where it should just do what the feature detection states: disable gtk support but build successfully without it, I'm checking if this is a quick surgery.

- Arnaldo

⬢ [acme@toolbx perf-tools-next]$ alias m='rm -rf ~/libexec/perf-core/ ; make -k GTK4=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin && perf test import && cat /tmp/build/$(basename $PWD)/feature/test-all.make.output' ; export PYTHONPATH=/tmp/build/$(basename $PWD)/python ⬢ [acme@toolbx perf-tools-next]$ m
make: Entering directory '/home/acme/git/perf-tools-next/tools/perf'
BUILD: Doing 'make -j32' parallel build
Makefile.config:781: GTK4 not found, disables GTK4 support. Please install gtk4-devel or libgtk-4-dev

Auto-detecting system features:

...                                   libdw: [ on  ]
...                                   glibc: [ on  ]
...                                    gtk4: [ OFF ]
...                                  libelf: [ on  ]
...                                 libnuma: [ on  ]
...                  numa_num_possible_cpus: [ on  ]
...                               libpython: [ on  ]
...                             libcapstone: [ on  ]
...                               llvm-perf: [ on  ]
...                                    zlib: [ on  ]
...                                    lzma: [ on  ]
...                                     bpf: [ on  ]
...                                  libaio: [ on  ]
...                                 libzstd: [ on  ]
...                              libopenssl: [ on  ]
...                                    rust: [ on  ]

INSTALL libsubcmd_headers
INSTALL libsymbol_headers
INSTALL libapi_headers
INSTALL libperf_headers

  CC      /tmp/build/perf-tools-next/libperf/core.o
  CC      /tmp/build/perf-tools-next/libperf/cpumap.o
  CC      /tmp/build/perf-tools-next/libperf/threadmap.o
  CC      /tmp/build/perf-tools-next/libperf/evsel.o
  CC      /tmp/build/perf-tools-next/libsubcmd/exec-cmd.o
  CC      /tmp/build/perf-tools-next/libperf/evlist.o
  CC      /tmp/build/perf-tools-next/libperf/mmap.o
  INSTALL libbpf_headers
  CC      /tmp/build/perf-tools-next/libsubcmd/help.o
  CC      /tmp/build/perf-tools-next/libperf/zalloc.o
  CC      /tmp/build/perf-tools-next/libsubcmd/pager.o
  CC      /tmp/build/perf-tools-next/libperf/xyarray.o
  CC      /tmp/build/perf-tools-next/libsubcmd/parse-options.o
  CC      /tmp/build/perf-tools-next/libperf/lib.o
  CC      /tmp/build/perf-tools-next/libsubcmd/run-command.o
  CC      /tmp/build/perf-tools-next/libsubcmd/sigchain.o
  CC      /tmp/build/perf-tools-next/libsubcmd/subcmd-config.o
  LD      /tmp/build/perf-tools-next/libsubcmd/libsubcmd-in.o
  AR      /tmp/build/perf-tools-next/libsubcmd/libsubcmd.a
  LD      /tmp/build/perf-tools-next/libperf/libperf-in.o
  AR      /tmp/build/perf-tools-next/libperf/libperf.a
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  CC      /tmp/build/perf-tools-next/jvmti/libjvmti.o
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  CC      /tmp/build/perf-tools-next/trace/beauty/syscalltbl.o
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  CC      /tmp/build/perf-tools-next/arch/common.o
  CC      /tmp/build/perf-tools-next/jvmti/jvmti_agent.o
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  CC      /tmp/build/perf-tools-next/trace/beauty/arch_errno_names.o
  CC      /tmp/build/perf-tools-next/ui/setup.o
  CC      /tmp/build/perf-tools-next/jvmti/libstring.o
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  CC      /tmp/build/perf-tools-next/ui/helpline.o
  CC      /tmp/build/perf-tools-next/jvmti/libctype.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/regs_load.o
  CC      /tmp/build/perf-tools-next/ui/gtk/browser.o
  CC      /tmp/build/perf-tools-next/ui/gtk/hists.o
  CC      /tmp/build/perf-tools-next/ui/gtk/setup.o
  CC      /tmp/build/perf-tools-next/ui/gtk/annotate.o
  CC      /tmp/build/perf-tools-next/ui/progress.o
  CC      /tmp/build/perf-tools-next/scripts/python/Perf-Trace-Util/Context.o
  CC      /tmp/build/perf-tools-next/ui/gtk/util.o
  CC      /tmp/build/perf-tools-next/ui/util.o
  CC      /tmp/build/perf-tools-next/ui/gtk/helpline.o
  CC      /tmp/build/perf-tools-next/ui/gtk/zalloc.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
  CC      /tmp/build/perf-tools-next/ui/gtk/progress.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/arch-tests.o
  CC      /tmp/build/perf-tools-next/ui/hist.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/hybrid.o
  CC      /tmp/build/perf-tools-next/builtin-annotate.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/header.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/intel-pt-test.o
  CC      /tmp/build/perf-tools-next/ui/stdio/hist.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/bp-modify.o
  CC      /tmp/build/perf-tools-next/ui/browser.o
  CC      /tmp/build/perf-tools-next/tests/builtin-test.o
  CC      /tmp/build/perf-tools-next/ui/keysyms.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/tsc.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/amd-ibs-via-core-pmu.o
  CC      /tmp/build/perf-tools-next/tests/tests-scripts.o
  CC      /tmp/build/perf-tools-next/builtin-check.o
  LD      /tmp/build/perf-tools-next/trace/beauty/perf-util-in.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/pmu.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/amd-ibs-period.o
  CC      /tmp/build/perf-tools-next/builtin-config.o
  LD      /tmp/build/perf-tools-next/jvmti/jvmti-in.o
  LD      /tmp/build/perf-tools-next/scripts/python/Perf-Trace-Util/perf-util-in.o
  CC      /tmp/build/perf-tools-next/tests/parse-events.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/topdown.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/topdown.o
  CC      /tmp/build/perf-tools-next/builtin-diff.o
In file included from ui/gtk/setup.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
CC /tmp/build/perf-tools-next/tests/uncore-event-sorting.o
In file included from ui/gtk/annotate.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory

    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~
In file included from ui/gtk/helpline.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
compilation terminated.
In file included from ui/gtk/browser.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory

    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
CC /tmp/build/perf-tools-next/ui/tui/setup.o
CC /tmp/build/perf-tools-next/arch/x86/util/machine.o
In file included from ui/gtk/util.c:3:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory

    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~
compilation terminated.
In file included from ui/gtk/hists.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/annotate.o] Error 1 make[4]: *** Waiting for unfinished jobs....
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/browser.o] Error 1
CC /tmp/build/perf-tools-next/ui/browsers/annotate.o
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/helpline.o] Error 1 make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/setup.o] Error 1
CC /tmp/build/perf-tools-next/tests/dso-data.o
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/hists.o] Error 1 make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/util.o] Error 1

  CC      /tmp/build/perf-tools-next/arch/x86/util/event.o
  CC      /tmp/build/perf-tools-next/builtin-evlist.o
  CC      /tmp/build/perf-tools-next/ui/tui/util.o
  LD      /tmp/build/perf-tools-next/scripts/perf-util-in.o
  CC      /tmp/build/perf-tools-next/tests/vmlinux-kallsyms.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/evlist.o
  CC      /tmp/build/perf-tools-next/ui/tui/helpline.o
  CC      /tmp/build/perf-tools-next/builtin-ftrace.o
  CC      /tmp/build/perf-tools-next/ui/browsers/annotate-data.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/mem-events.o
  CC      /tmp/build/perf-tools-next/tests/openat-syscall.o
  CC      /tmp/build/perf-tools-next/ui/tui/progress.o
  CC      /tmp/build/perf-tools-next/builtin-help.o
  CC      /tmp/build/perf-tools-next/ui/browsers/hists.o
  CC      /tmp/build/perf-tools-next/tests/openat-syscall-all-cpus.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/evsel.o
  CC      /tmp/build/perf-tools-next/builtin-buildid-list.o
  CC      /tmp/build/perf-tools-next/tests/openat-syscall-tp-fields.o
  LD      /tmp/build/perf-tools-next/arch/x86/tests/perf-test-in.o
In file included from ui/gtk/progress.c:5:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~
compilation terminated.
  CC      /tmp/build/perf-tools-next/builtin-buildid-cache.o
  CC      /tmp/build/perf-tools-next/tests/mmap-basic.o
  CC      /tmp/build/perf-tools-next/builtin-kallsyms.o
  CC      /tmp/build/perf-tools-next/ui/browsers/map.o
  CC      /tmp/build/perf-tools-next/tests/perf-record.o
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/progress.o] Error 1
  CC      /tmp/build/perf-tools-next/arch/x86/util/iostat.o
  CC      /tmp/build/perf-tools-next/builtin-list.o
  CC      /tmp/build/perf-tools-next/ui/browsers/scripts.o
  CC      /tmp/build/perf-tools-next/tests/evsel-roundtrip-name.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/auxtrace.o
  CC      /tmp/build/perf-tools-next/ui/browsers/header.o
  CC      /tmp/build/perf-tools-next/builtin-record.o
  LD      /tmp/build/perf-tools-next/arch/x86/perf-test-in.o
  CC      /tmp/build/perf-tools-next/tests/evsel-tp-sched.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/intel-pt.o
  CC      /tmp/build/perf-tools-next/builtin-report.o
  CC      /tmp/build/perf-tools-next/ui/browsers/res_sample.o
  CC      /tmp/build/perf-tools-next/builtin-stat.o
  LD      /tmp/build/perf-tools-next/arch/perf-test-in.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/intel-bts.o
  CC      /tmp/build/perf-tools-next/ui/browsers/c2c-function.o
  CC      /tmp/build/perf-tools-next/builtin-top.o
  CC      /tmp/build/perf-tools-next/builtin-script.o
  CC      /tmp/build/perf-tools-next/tests/fdarray.o
  LINK    /tmp/build/perf-tools-next/libperf-jvmti.so
  CC      /tmp/build/perf-tools-next/builtin-kvm.o
  CC      /tmp/build/perf-tools-next/tests/pmu.o
  CC      /tmp/build/perf-tools-next/builtin-inject.o
  CC      /tmp/build/perf-tools-next/tests/pmu-events.o
  CC      /tmp/build/perf-tools-next/builtin-mem.o
  CC      /tmp/build/perf-tools-next/tests/hists_common.o
  CC      /tmp/build/perf-tools-next/builtin-data.o
  CC      /tmp/build/perf-tools-next/builtin-version.o
  LD      /tmp/build/perf-tools-next/arch/x86/util/perf-util-in.o
  CC      /tmp/build/perf-tools-next/tests/hists_link.o
  CC      /tmp/build/perf-tools-next/builtin-c2c.o
  CC      /tmp/build/perf-tools-next/tests/hists_filter.o

make[3]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:158: ui/gtk] Error 2 make[2]: *** [Makefile.perf:584: /tmp/build/perf-tools-next/gtk-in.o] Error 2 make[2]: *** Waiting for unfinished jobs....
CC /tmp/build/perf-tools-next/builtin-daemon.o

#10 lore raw
Quoted 50 lines · Arnaldo Carvalho de Melo
Quoted 49 lines · Arnaldo Carvalho de Melo
Quoted 6 lines · Arnaldo Carvalho de Melo
Quoted 5 lines · Matt Turner

GTK2 is long dead upstream and increasingly hard to keep building on current distros. This series ports perf's GTK-based report browser to GTK4 and fixes it up so it's actually loadable at runtime after the port.

Quoted 8 lines
Quoted 5 lines

Patch 1 does the mechanical port (build system, widget API changes), including the leftover-GTK2-call and signal-handling fixes that were a separate patch 3 in v4. Patch 2 fixes a runtime issue found after the port that prevented the browser from loading. Patch 3 fixes two stack buffer overflows in the hierarchy view that predate the port.

I'm tentatively merging this, will test build on my distro container set and perform some testing, thanks for working on this!

Some fuzz applying the first patch in the series:

⬢ [acme@toolbx perf-tools-next]$ patch -p1 < ./v8_20260908_mattst88_perf_tools_port_ui_from_gtk2_to_gtk4.mbx patching file tools/build/Makefile.feature
patching file tools/build/feature/Makefile
patching file tools/build/feature/test-gtk2-infobar.c
patching file tools/build/feature/test-gtk4.c (renamed from tools/build/feature/test-gtk2.c) patching file tools/perf/Documentation/perf-report.txt
Hunk #1 succeeded at 354 with fuzz 2 (offset 3 lines).
patching file tools/perf/Makefile
patching file tools/perf/Makefile.config
patching file tools/perf/Makefile.perf
patching file tools/perf/builtin-annotate.c
Hunk #1 succeeded at 61 (offset 9 lines).
Hunk #2 succeeded at 721 (offset 9 lines).
Hunk #3 succeeded at 840 (offset 12 lines).
Hunk #4 succeeded at 910 (offset 12 lines).
patching file tools/perf/builtin-report.c
Hunk #1 succeeded at 83 (offset 1 line).
Hunk #2 succeeded at 1360 (offset 1 line).
Hunk #3 succeeded at 1714 (offset 4 lines).
patching file tools/perf/scripts/install-build-deps.sh
patching file tools/perf/tests/make
patching file tools/perf/ui/gtk/annotate.c
patching file tools/perf/ui/gtk/browser.c
patching file tools/perf/ui/gtk/gtk.h
patching file tools/perf/ui/gtk/hists.c
patching file tools/perf/ui/gtk/progress.c
patching file tools/perf/ui/gtk/setup.c
patching file tools/perf/ui/gtk/util.c
patching file tools/perf/ui/setup.c
⬢ [acme@toolbx perf-tools-next]$

Quoted 7 lines
Quoted 1 line

I fixed it up quickly, now lets see the rest...

Trying to build with it with just the first patch in this series in it correctly discovers that the gtk4 devel files are not available but then proceed to try to include gtk code and thus fail, where it should just do what the feature detection states: disable gtk support but build successfully without it, I'm checking if this is a quick surgery.

This is a pre-existing condition, if I try without your series and without gtk2 devel files, I get the same problem, so I'll now try to build it with the required gtk4 devel files, we can fix this pre-existing problem afterwards, its not a regression introduced by your series.

⬢ [acme@toolbx perf-tools-next]$ alias m='rm -rf ~/libexec/perf-core/ ; make -k GTK2=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin && perf test import && cat /tmp/build/$(basename $PWD)/feature/test-all.make.output' ; export PYTHONPATH=/tmp/build/$(basename $PWD)/python ⬢ [acme@toolbx perf-tools-next]$ m
make: Entering directory '/home/acme/git/perf-tools-next/tools/perf'
BUILD: Doing 'make -j32' parallel build
Makefile.config:781: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev

Auto-detecting system features:

...                                   libdw: [ on  ]
...                                   glibc: [ on  ]
...                                  libelf: [ on  ]
...                                 libnuma: [ on  ]
...                  numa_num_possible_cpus: [ on  ]
...                               libpython: [ on  ]
...                             libcapstone: [ on  ]
...                               llvm-perf: [ on  ]
...                                    zlib: [ on  ]
...                                    lzma: [ on  ]
...                                     bpf: [ on  ]
...                                  libaio: [ on  ]
...                                 libzstd: [ on  ]
...                              libopenssl: [ on  ]
...                                    rust: [ on  ]

INSTALL libsubcmd_headers
INSTALL libsymbol_headers
INSTALL libperf_headers
INSTALL libapi_headers
PERF_VERSION = 7.3.rc2.g93fd7adf1a47
INSTALL libbpf_headers

  GEN     /tmp/build/perf-tools-next/perf-archive
  GEN     /tmp/build/perf-tools-next/perf-iostat
  CC      /tmp/build/perf-tools-next/ui/gtk/browser.o
  CC      /tmp/build/perf-tools-next/ui/gtk/hists.o
  CC      /tmp/build/perf-tools-next/ui/gtk/setup.o
  CC      /tmp/build/perf-tools-next/arch/common.o
  CC      /tmp/build/perf-tools-next/ui/gtk/util.o
  CC      /tmp/build/perf-tools-next/ui/setup.o
  CC      /tmp/build/perf-tools-next/ui/gtk/helpline.o
  CC      /tmp/build/perf-tools-next/ui/gtk/progress.o
  CC      /tmp/build/perf-tools-next/ui/gtk/annotate.o
  CC      /tmp/build/perf-tools-next/builtin-annotate.o
  CC      /tmp/build/perf-tools-next/builtin-diff.o
  CC      /tmp/build/perf-tools-next/ui/browsers/annotate.o
  CC      /tmp/build/perf-tools-next/ui/browsers/annotate-data.o
  CC      /tmp/build/perf-tools-next/ui/browsers/hists.o
  LD      /tmp/build/perf-tools-next/arch/perf-util-in.o
  CC      /tmp/build/perf-tools-next/builtin-record.o
In file included from ui/gtk/browser.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~
compilation terminated.
In file included from ui/gtk/hists.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/browser.o] Error 1
CC /tmp/build/perf-tools-next/builtin-report.o
make[4]: *** Waiting for unfinished jobs....
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/hists.o] Error 1
LINK /tmp/build/perf-tools-next/libperf-jvmti.so
In file included from ui/gtk/setup.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory

    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~
compilation terminated.
In file included from ui/gtk/util.c:3:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~
compilation terminated.
In file included from ui/gtk/helpline.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/util.o] Error 1 make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/setup.o] Error 1
CC /tmp/build/perf-tools-next/builtin-stat.o
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/helpline.o] Error 1

  CC      /tmp/build/perf-tools-next/builtin-top.o
  LD      /tmp/build/perf-tools-next/ui/browsers/perf-ui-in.o
  CC      /tmp/build/perf-tools-next/builtin-script.o
  CC      /tmp/build/perf-tools-next/builtin-kvm.o
In file included from ui/gtk/progress.c:4:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/progress.o] Error 1 In file included from ui/gtk/annotate.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory

    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/annotate.o] Error 1 make[3]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:158: ui/gtk] Error 2
make[2]: *** [Makefile.perf:584: /tmp/build/perf-tools-next/gtk-in.o] Error 2
make[2]: *** Waiting for unfinished jobs....
LD /tmp/build/perf-tools-next/ui/perf-ui-in.o

Quoted 213 lines

- Arnaldo

⬢ [acme@toolbx perf-tools-next]$ alias m='rm -rf ~/libexec/perf-core/ ; make -k GTK4=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin && perf test import && cat /tmp/build/$(basename $PWD)/feature/test-all.make.output' ; export PYTHONPATH=/tmp/build/$(basename $PWD)/python ⬢ [acme@toolbx perf-tools-next]$ m
make: Entering directory '/home/acme/git/perf-tools-next/tools/perf'
BUILD: Doing 'make -j32' parallel build
Makefile.config:781: GTK4 not found, disables GTK4 support. Please install gtk4-devel or libgtk-4-dev

Auto-detecting system features:

...                                   libdw: [ on  ]
...                                   glibc: [ on  ]
...                                    gtk4: [ OFF ]
...                                  libelf: [ on  ]
...                                 libnuma: [ on  ]
...                  numa_num_possible_cpus: [ on  ]
...                               libpython: [ on  ]
...                             libcapstone: [ on  ]
...                               llvm-perf: [ on  ]
...                                    zlib: [ on  ]
...                                    lzma: [ on  ]
...                                     bpf: [ on  ]
...                                  libaio: [ on  ]
...                                 libzstd: [ on  ]
...                              libopenssl: [ on  ]
...                                    rust: [ on  ]

INSTALL libsubcmd_headers
INSTALL libsymbol_headers
INSTALL libapi_headers
INSTALL libperf_headers

  CC      /tmp/build/perf-tools-next/libperf/core.o
  CC      /tmp/build/perf-tools-next/libperf/cpumap.o
  CC      /tmp/build/perf-tools-next/libperf/threadmap.o
  CC      /tmp/build/perf-tools-next/libperf/evsel.o
  CC      /tmp/build/perf-tools-next/libsubcmd/exec-cmd.o
  CC      /tmp/build/perf-tools-next/libperf/evlist.o
  CC      /tmp/build/perf-tools-next/libperf/mmap.o
  INSTALL libbpf_headers
  CC      /tmp/build/perf-tools-next/libsubcmd/help.o
  CC      /tmp/build/perf-tools-next/libperf/zalloc.o
  CC      /tmp/build/perf-tools-next/libsubcmd/pager.o
  CC      /tmp/build/perf-tools-next/libperf/xyarray.o
  CC      /tmp/build/perf-tools-next/libsubcmd/parse-options.o
  CC      /tmp/build/perf-tools-next/libperf/lib.o
  CC      /tmp/build/perf-tools-next/libsubcmd/run-command.o
  CC      /tmp/build/perf-tools-next/libsubcmd/sigchain.o
  CC      /tmp/build/perf-tools-next/libsubcmd/subcmd-config.o
  LD      /tmp/build/perf-tools-next/libsubcmd/libsubcmd-in.o
  AR      /tmp/build/perf-tools-next/libsubcmd/libsubcmd.a
  LD      /tmp/build/perf-tools-next/libperf/libperf-in.o
  AR      /tmp/build/perf-tools-next/libperf/libperf.a
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  CC      /tmp/build/perf-tools-next/jvmti/libjvmti.o
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  CC      /tmp/build/perf-tools-next/trace/beauty/syscalltbl.o
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  CC      /tmp/build/perf-tools-next/arch/common.o
  CC      /tmp/build/perf-tools-next/jvmti/jvmti_agent.o
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  CC      /tmp/build/perf-tools-next/trace/beauty/arch_errno_names.o
  CC      /tmp/build/perf-tools-next/ui/setup.o
  CC      /tmp/build/perf-tools-next/jvmti/libstring.o
  MKDIR   /tmp/build/perf-tools-next/ui/gtk/
  CC      /tmp/build/perf-tools-next/ui/helpline.o
  CC      /tmp/build/perf-tools-next/jvmti/libctype.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/regs_load.o
  CC      /tmp/build/perf-tools-next/ui/gtk/browser.o
  CC      /tmp/build/perf-tools-next/ui/gtk/hists.o
  CC      /tmp/build/perf-tools-next/ui/gtk/setup.o
  CC      /tmp/build/perf-tools-next/ui/gtk/annotate.o
  CC      /tmp/build/perf-tools-next/ui/progress.o
  CC      /tmp/build/perf-tools-next/scripts/python/Perf-Trace-Util/Context.o
  CC      /tmp/build/perf-tools-next/ui/gtk/util.o
  CC      /tmp/build/perf-tools-next/ui/util.o
  CC      /tmp/build/perf-tools-next/ui/gtk/helpline.o
  CC      /tmp/build/perf-tools-next/ui/gtk/zalloc.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
  CC      /tmp/build/perf-tools-next/ui/gtk/progress.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/arch-tests.o
  CC      /tmp/build/perf-tools-next/ui/hist.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/hybrid.o
  CC      /tmp/build/perf-tools-next/builtin-annotate.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/header.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/intel-pt-test.o
  CC      /tmp/build/perf-tools-next/ui/stdio/hist.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/bp-modify.o
  CC      /tmp/build/perf-tools-next/ui/browser.o
  CC      /tmp/build/perf-tools-next/tests/builtin-test.o
  CC      /tmp/build/perf-tools-next/ui/keysyms.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/tsc.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/amd-ibs-via-core-pmu.o
  CC      /tmp/build/perf-tools-next/tests/tests-scripts.o
  CC      /tmp/build/perf-tools-next/builtin-check.o
  LD      /tmp/build/perf-tools-next/trace/beauty/perf-util-in.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/pmu.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/amd-ibs-period.o
  CC      /tmp/build/perf-tools-next/builtin-config.o
  LD      /tmp/build/perf-tools-next/jvmti/jvmti-in.o
  LD      /tmp/build/perf-tools-next/scripts/python/Perf-Trace-Util/perf-util-in.o
  CC      /tmp/build/perf-tools-next/tests/parse-events.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/topdown.o
  CC      /tmp/build/perf-tools-next/arch/x86/tests/topdown.o
  CC      /tmp/build/perf-tools-next/builtin-diff.o
In file included from ui/gtk/setup.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
CC /tmp/build/perf-tools-next/tests/uncore-event-sorting.o
In file included from ui/gtk/annotate.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory

    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~
In file included from ui/gtk/helpline.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
compilation terminated.
In file included from ui/gtk/browser.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory

    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
CC /tmp/build/perf-tools-next/ui/tui/setup.o
CC /tmp/build/perf-tools-next/arch/x86/util/machine.o
In file included from ui/gtk/util.c:3:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory

    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~
compilation terminated.
In file included from ui/gtk/hists.c:2:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~

compilation terminated.
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/annotate.o] Error 1 make[4]: *** Waiting for unfinished jobs....
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/browser.o] Error 1
CC /tmp/build/perf-tools-next/ui/browsers/annotate.o
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/helpline.o] Error 1 make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/setup.o] Error 1
CC /tmp/build/perf-tools-next/tests/dso-data.o
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/hists.o] Error 1 make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/util.o] Error 1

  CC      /tmp/build/perf-tools-next/arch/x86/util/event.o
  CC      /tmp/build/perf-tools-next/builtin-evlist.o
  CC      /tmp/build/perf-tools-next/ui/tui/util.o
  LD      /tmp/build/perf-tools-next/scripts/perf-util-in.o
  CC      /tmp/build/perf-tools-next/tests/vmlinux-kallsyms.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/evlist.o
  CC      /tmp/build/perf-tools-next/ui/tui/helpline.o
  CC      /tmp/build/perf-tools-next/builtin-ftrace.o
  CC      /tmp/build/perf-tools-next/ui/browsers/annotate-data.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/mem-events.o
  CC      /tmp/build/perf-tools-next/tests/openat-syscall.o
  CC      /tmp/build/perf-tools-next/ui/tui/progress.o
  CC      /tmp/build/perf-tools-next/builtin-help.o
  CC      /tmp/build/perf-tools-next/ui/browsers/hists.o
  CC      /tmp/build/perf-tools-next/tests/openat-syscall-all-cpus.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/evsel.o
  CC      /tmp/build/perf-tools-next/builtin-buildid-list.o
  CC      /tmp/build/perf-tools-next/tests/openat-syscall-tp-fields.o
  LD      /tmp/build/perf-tools-next/arch/x86/tests/perf-test-in.o
In file included from ui/gtk/progress.c:5:
ui/gtk/gtk.h:8:10: fatal error: gtk/gtk.h: No such file or directory
    8 | #include <gtk/gtk.h>
      |          ^~~~~~~~~~~
compilation terminated.
  CC      /tmp/build/perf-tools-next/builtin-buildid-cache.o
  CC      /tmp/build/perf-tools-next/tests/mmap-basic.o
  CC      /tmp/build/perf-tools-next/builtin-kallsyms.o
  CC      /tmp/build/perf-tools-next/ui/browsers/map.o
  CC      /tmp/build/perf-tools-next/tests/perf-record.o
make[4]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:96: /tmp/build/perf-tools-next/ui/gtk/progress.o] Error 1
  CC      /tmp/build/perf-tools-next/arch/x86/util/iostat.o
  CC      /tmp/build/perf-tools-next/builtin-list.o
  CC      /tmp/build/perf-tools-next/ui/browsers/scripts.o
  CC      /tmp/build/perf-tools-next/tests/evsel-roundtrip-name.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/auxtrace.o
  CC      /tmp/build/perf-tools-next/ui/browsers/header.o
  CC      /tmp/build/perf-tools-next/builtin-record.o
  LD      /tmp/build/perf-tools-next/arch/x86/perf-test-in.o
  CC      /tmp/build/perf-tools-next/tests/evsel-tp-sched.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/intel-pt.o
  CC      /tmp/build/perf-tools-next/builtin-report.o
  CC      /tmp/build/perf-tools-next/ui/browsers/res_sample.o
  CC      /tmp/build/perf-tools-next/builtin-stat.o
  LD      /tmp/build/perf-tools-next/arch/perf-test-in.o
  CC      /tmp/build/perf-tools-next/arch/x86/util/intel-bts.o
  CC      /tmp/build/perf-tools-next/ui/browsers/c2c-function.o
  CC      /tmp/build/perf-tools-next/builtin-top.o
  CC      /tmp/build/perf-tools-next/builtin-script.o
  CC      /tmp/build/perf-tools-next/tests/fdarray.o
  LINK    /tmp/build/perf-tools-next/libperf-jvmti.so
  CC      /tmp/build/perf-tools-next/builtin-kvm.o
  CC      /tmp/build/perf-tools-next/tests/pmu.o
  CC      /tmp/build/perf-tools-next/builtin-inject.o
  CC      /tmp/build/perf-tools-next/tests/pmu-events.o
  CC      /tmp/build/perf-tools-next/builtin-mem.o
  CC      /tmp/build/perf-tools-next/tests/hists_common.o
  CC      /tmp/build/perf-tools-next/builtin-data.o
  CC      /tmp/build/perf-tools-next/builtin-version.o
  LD      /tmp/build/perf-tools-next/arch/x86/util/perf-util-in.o
  CC      /tmp/build/perf-tools-next/tests/hists_link.o
  CC      /tmp/build/perf-tools-next/builtin-c2c.o
  CC      /tmp/build/perf-tools-next/tests/hists_filter.o

make[3]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:158: ui/gtk] Error 2 make[2]: *** [Makefile.perf:584: /tmp/build/perf-tools-next/gtk-in.o] Error 2 make[2]: *** Waiting for unfinished jobs....
CC /tmp/build/perf-tools-next/builtin-daemon.o

#11 lore raw
Quoted 13 lines · Arnaldo Carvalho de Melo
Quoted 11 lines · Arnaldo Carvalho de Melo
Quoted 4 lines · Arnaldo Carvalho de Melo

patching file tools/perf/ui/setup.c
⬢ [acme@toolbx perf-tools-next]$

I fixed it up quickly, now lets see the rest...

Trying to build with it with just the first patch in this series in it correctly discovers that the gtk4 devel files are not available but then proceed to try to include gtk code and thus fail, where it should just do what the feature detection states: disable gtk support but build successfully without it, I'm checking if this is a quick surgery.

Quoted 5 lines

This is a pre-existing condition, if I try without your series and without gtk2 devel files, I get the same problem, so I'll now try to build it with the required gtk4 devel files, we can fix this pre-existing problem afterwards, its not a regression introduced by your series.

Now, with GTK4=1 and trying to build the first patch after installing gtk4-devel on fedora 43 it fails to detect gtk4 support:

⬢ [acme@toolbx perf-tools-next]$ m
make: Entering directory '/home/acme/git/perf-tools-next/tools/perf'
BUILD: Doing 'make -j32' parallel build

Auto-detecting system features:

...                                   libdw: [ on  ]
...                                   glibc: [ on  ]
...                                    gtk4: [ OFF ]
...                                  libelf: [ on  ]
...                                 libnuma: [ on  ]
...                  numa_num_possible_cpus: [ on  ]
...                               libpython: [ on  ]
...                             libcapstone: [ on  ]
...                               llvm-perf: [ on  ]
...                                    zlib: [ on  ]
...                                    lzma: [ on  ]
...                                     bpf: [ on  ]
...                                  libaio: [ on  ]
...                                 libzstd: [ on  ]
...                              libopenssl: [ on  ]
...                                    rust: [ on  ]

And:

⬢ [acme@toolbx perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-gtk4.make.output
cat: /tmp/build/perf-tools-next/feature/test-gtk4.make.output: No such file or directory ⬢ [acme@toolbx perf-tools-next]$ ls -la /tmp/build/perf-tools-next/feature/test-gtk4*
ls: cannot access '/tmp/build/perf-tools-next/feature/test-gtk4*': No such file or directory ⬢ [acme@toolbx perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output ⬢ [acme@toolbx perf-tools-next]$ ldd /tmp/build/perf-tools-next/feature/test-all.
test-all.bin test-all.d test-all.make.output
⬢ [acme@toolbx perf-tools-next]$ ldd /tmp/build/perf-tools-next/feature/test-all.bin

	linux-vdso.so.1 (0x00007f271bb90000)
	libdw.so.1 => /lib64/libdw.so.1 (0x00007f271bae1000)
	libpython3.14.so.1.0 => /lib64/libpython3.14.so.1.0 (0x00007f271b4a7000)
	libm.so.6 => /lib64/libm.so.6 (0x00007f271b3b2000)
	libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f271b391000)
	libelf.so.1 => /lib64/libelf.so.1 (0x00007f271b374000)
	libnuma.so.1 => /lib64/libnuma.so.1 (0x00007f271b366000)
	libslang.so.2 => /lib64/libslang.so.2 (0x00007f271b072000)
	libz.so.1 => /lib64/libz.so.1 (0x00007f271b04a000)
	liblzma.so.5 => /lib64/liblzma.so.5 (0x00007f271b015000)
	libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f271af52000)
	libssl.so.3 => /lib64/libssl.so.3 (0x00007f271ae67000)
	libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007f271a925000)
	libc.so.6 => /lib64/libc.so.6 (0x00007f271a731000)
	libbz2.so.1 => /lib64/libbz2.so.1 (0x00007f271a71d000)
	/lib64/ld-linux-x86-64.so.2 (0x00007f271bb92000)

⬢ [acme@toolbx perf-tools-next]$

Meaning its feature detection isn't being called at all, remains at undetected:

⬢ [acme@toolbx perf-tools-next]$ grep gtk4 /tmp/build/perf-tools-next/FEATURE-DUMP ⬢ [acme@toolbx perf-tools-next]$

Probably this is pre-existing, but I wonder how you managed to test then?

- Arnaldo

#12 lore raw
Quoted 27 lines · Arnaldo Carvalho de Melo
Quoted 13 lines · Arnaldo Carvalho de Melo
Quoted 11 lines · Arnaldo Carvalho de Melo
Quoted 4 lines · Arnaldo Carvalho de Melo

patching file tools/perf/ui/setup.c
⬢ [acme@toolbx perf-tools-next]$

I fixed it up quickly, now lets see the rest...

Trying to build with it with just the first patch in this series in it correctly discovers that the gtk4 devel files are not available but then proceed to try to include gtk code and thus fail, where it should just do what the feature detection states: disable gtk support but build successfully without it, I'm checking if this is a quick surgery.

Quoted 5 lines

This is a pre-existing condition, if I try without your series and without gtk2 devel files, I get the same problem, so I'll now try to build it with the required gtk4 devel files, we can fix this pre-existing problem afterwards, its not a regression introduced by your series.

Now, with GTK4=1 and trying to build the first patch after installing gtk4-devel on fedora 43 it fails to detect gtk4 support:

⬢ [acme@toolbx perf-tools-next]$ m
make: Entering directory '/home/acme/git/perf-tools-next/tools/perf'
BUILD: Doing 'make -j32' parallel build

Quoted 6 lines

Auto-detecting system features:

...                                   libdw: [ on  ]
...                                   glibc: [ on  ]

... gtk4: [ OFF ]
... libelf: [ on ]
... libnuma: [ on ]

I see, you do it with tools/perf being your cwd, I tried that and it works now:

⬢ [acme@toolbx perf-tools-next]$ cd tools/perf/
⬢ [acme@toolbx perf]$ make GTK4=1
BUILD: Doing 'make -j32' parallel build

Auto-detecting system features:

...                                   libdw: [ on  ]
...                                   glibc: [ on  ]
...                                    gtk4: [ on  ]
...                                  libelf: [ on  ]
...                                 libnuma: [ on  ]
...                  numa_num_possible_cpus: [ on  ]
...                               libpython: [ on  ]
...                             libcapstone: [ on  ]
...                               llvm-perf: [ on  ]
...                                    zlib: [ on  ]
...                                    lzma: [ on  ]
...                                     bpf: [ on  ]
...                                  libaio: [ on  ]
...                                 libzstd: [ on  ]
...                              libopenssl: [ on  ]
...                                    rust: [ on  ]

INSTALL libsubcmd_headers
INSTALL libapi_headers
PERF_VERSION = 7.3.rc2.g581f81a14c5c
INSTALL libsymbol_headers
GEN perf-archive
INSTALL libperf_headers

  GEN     perf-iostat
  CC      /home/acme/git/perf-tools-next/tools/perf/libperf/core.o
  CC      /home/acme/git/perf-tools-next/tools/perf/libperf/cpumap.o
  CC      /home/acme/git/perf-tools-next/tools/perf/libperf/threadmap.o
  CC      /home/acme/git/perf-tools-next/tools/perf/libperf/evsel.o
  INSTALL libbpf_headers
  CC      /home/acme/git/perf-tools-next/tools/perf/libperf/evlist.o
  CC      /home/acme/git/perf-tools-next/tools/perf/libperf/mmap.o
  CC      /home/acme/git/perf-tools-next/tools/perf/libperf/zalloc.o
  CC      /home/acme/git/perf-tools-next/tools/perf/libperf/xyarray.o
  CC      /home/acme/git/perf-tools-next/tools/perf/libperf/lib.o
  LD      /home/acme/git/perf-tools-next/tools/perf/libperf/libperf-in.o
  AR      /home/acme/git/perf-tools-next/tools/perf/libperf/libperf.a
  CC      ui/gtk/browser.o
  CC      jvmti/libjvmti.o
  CC      ui/gtk/hists.o
  CC      arch/common.o
  CC      ui/gtk/setup.o
  CC      trace/beauty/syscalltbl.o
  CC      ui/gtk/util.o
  CC      jvmti/jvmti_agent.o
  CC      ui/gtk/helpline.o
  CC      trace/beauty/arch_errno_names.o
  CC      jvmti/libstring.o
  CC      ui/gtk/progress.o
  CC      jvmti/libctype.o
  CC      ui/gtk/annotate.o
<SNIP>
  LD      perf-bench-in.o
  AR      libperf-bench.a
  LINK    perf
  LINK    libperf-gtk.so

⬢ [acme@toolbx perf]$

I don't think this was present before, lemme try...

My bad, I made a mistake and was trying to build with gtk4 while using GTK2=1 on the make command line, that I had switched to test building with gtk2 for that pre-existing problem and forgot to switch back to GTK4=1 when returning to test your patches...

Now, with it it works as expected, using 'make GTK4=1 -C tools/perf', building the first patch:

⬢ [acme@toolbx perf-tools-next]$ rm -rf /tmp/build/basename $PWD ; mkdir -p /tmp/build/basename $PWD
⬢ [acme@toolbx perf-tools-next]$ alias m='rm -rf ~/libexec/perf-core/ ; make -k GTK4=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin && perf test import && cat /tmp/build/$(basename $PWD)/feature/test-all.make.output' ; export PYTHONPATH=/tmp/build/$(basename $PWD)/python ⬢ [acme@toolbx perf-tools-next]$ m
make: Entering directory '/home/acme/git/perf-tools-next/tools/perf'
BUILD: Doing 'make -j32' parallel build

Auto-detecting system features:

...                                   libdw: [ on  ]
...                                   glibc: [ on  ]
...                                    gtk4: [ on  ]
...                                  libelf: [ on  ]
...                                 libnuma: [ on  ]
...                  numa_num_possible_cpus: [ on  ]
...                               libpython: [ on  ]
...                             libcapstone: [ on  ]
...                               llvm-perf: [ on  ]
...                                    zlib: [ on  ]
...                                    lzma: [ on  ]
...                                     bpf: [ on  ]
...                                  libaio: [ on  ]
...                                 libzstd: [ on  ]
...                              libopenssl: [ on  ]
...                                    rust: [ on  ]
  CC      /tmp/build/perf-tools-next/dlfilters/dlfilter-test-api-v0.o
  CC      /tmp/build/perf-tools-next/dlfilters/dlfilter-test-api-v2.o
  CC      /tmp/build/perf-tools-next/dlfilters/dlfilter-show-cycles.o
  GEN     /tmp/build/perf-tools-next/arch/arm64/include/generated/asm/sysreg-defs.h
<SNIP>
  LINK    /tmp/build/perf-tools-next/perf
  LINK    /tmp/build/perf-tools-next/libperf-gtk.so
  GEN     /tmp/build/perf-tools-next/python/perf.cpython-314-x86_64-linux-gnu.so

INSTALL GTK UI
INSTALL binaries
INSTALL tests
INSTALL libperf-jvmti.so
INSTALL libexec
INSTALL perf-archive
INSTALL perf-iostat
INSTALL python-scripts
install: omitting directory 'scripts/python/Perf-Trace-Util/lib/Perf/Trace/__pycache__'
INSTALL dlfilters
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf-tools-next/tools/perf'
104: 'import perf' in python : Ok

=== Test Summary ===
Passed main tests : 1
Passed subtests : 0
Skipped tests : 0
Failed tests : 0
⬢ [acme@toolbx perf-tools-next]$

And, which makes me recall why we made t his a plugin :-)

⬢ [acme@toolbx perf-tools-next]$ ldd /tmp/build/perf-tools-next/libperf-gtk.so

	linux-vdso.so.1 (0x00007f8588fb8000)
	libgtk-4.so.1 => /lib64/libgtk-4.so.1 (0x00007f858854c000)
	libpangocairo-1.0.so.0 => /lib64/libpangocairo-1.0.so.0 (0x00007f8588539000)
	libpango-1.0.so.0 => /lib64/libpango-1.0.so.0 (0x00007f85884cd000)
	libharfbuzz.so.0 => /lib64/libharfbuzz.so.0 (0x00007f8588399000)
	libgdk_pixbuf-2.0.so.0 => /lib64/libgdk_pixbuf-2.0.so.0 (0x00007f858836b000)
	libcairo-gobject.so.2 => /lib64/libcairo-gobject.so.2 (0x00007f8588362000)
	libcairo.so.2 => /lib64/libcairo.so.2 (0x00007f8588222000)
	libvulkan.so.1 => /lib64/libvulkan.so.1 (0x00007f858819a000)
	libgraphene-1.0.so.0 => /lib64/libgraphene-1.0.so.0 (0x00007f858817d000)
	libgio-2.0.so.0 => /lib64/libgio-2.0.so.0 (0x00007f8587faa000)
	libgobject-2.0.so.0 => /lib64/libgobject-2.0.so.0 (0x00007f8587f4b000)
	libglib-2.0.so.0 => /lib64/libglib-2.0.so.0 (0x00007f8587df4000)
	libc.so.6 => /lib64/libc.so.6 (0x00007f8587c00000)
	libgmodule-2.0.so.0 => /lib64/libgmodule-2.0.so.0 (0x00007f8587bfa000)
	libharfbuzz-subset.so.0 => /lib64/libharfbuzz-subset.so.0 (0x00007f8587ac5000)
	libfribidi.so.0 => /lib64/libfribidi.so.0 (0x00007f8587aa5000)
	libfontconfig.so.1 => /lib64/libfontconfig.so.1 (0x00007f8587a55000)
	libepoxy.so.0 => /lib64/libepoxy.so.0 (0x00007f8587949000)
	libm.so.6 => /lib64/libm.so.6 (0x00007f8587852000)
	libgstplay-1.0.so.0 => /lib64/libgstplay-1.0.so.0 (0x00007f858782e000)
	libgstvideo-1.0.so.0 => /lib64/libgstvideo-1.0.so.0 (0x00007f8587759000)
	libgstreamer-1.0.so.0 => /lib64/libgstreamer-1.0.so.0 (0x00007f8587600000)
	libgstgl-1.0.so.0 => /lib64/libgstgl-1.0.so.0 (0x00007f858756d000)
	libgstallocators-1.0.so.0 => /lib64/libgstallocators-1.0.so.0 (0x00007f8587564000)
	librsvg-2.so.2 => /lib64/librsvg-2.so.2 (0x00007f85870a0000)
	libXi.so.6 => /lib64/libXi.so.6 (0x00007f858708d000)
	libX11.so.6 => /lib64/libX11.so.6 (0x00007f8586f48000)
	libpangoft2-1.0.so.0 => /lib64/libpangoft2-1.0.so.0 (0x00007f8586f2c000)
	libtinysparql-3.0.so.0 => /lib64/libtinysparql-3.0.so.0 (0x00007f8586e58000)
	libpng16.so.16 => /lib64/libpng16.so.16 (0x00007f8586e1c000)
	libtiff.so.6 => /lib64/libtiff.so.6 (0x00007f8586d83000)
	libjpeg.so.62 => /lib64/libjpeg.so.62 (0x00007f8586ce1000)
	libxkbcommon.so.0 => /lib64/libxkbcommon.so.0 (0x00007f8586c88000)
	libwayland-client.so.0 => /lib64/libwayland-client.so.0 (0x00007f8586c78000)
	libwayland-egl.so.1 => /lib64/libwayland-egl.so.1 (0x00007f8586c74000)
	libXext.so.6 => /lib64/libXext.so.6 (0x00007f8586c60000)
	libXcursor.so.1 => /lib64/libXcursor.so.1 (0x00007f8586c51000)
	libXdamage.so.1 => /lib64/libXdamage.so.1 (0x00007f8586c4d000)
	libXfixes.so.3 => /lib64/libXfixes.so.3 (0x00007f8586c46000)
	libXrandr.so.2 => /lib64/libXrandr.so.2 (0x00007f8586c39000)
	libXinerama.so.1 => /lib64/libXinerama.so.1 (0x00007f8586c35000)
	libcairo-script-interpreter.so.2 => /lib64/libcairo-script-interpreter.so.2 (0x00007f8586c12000)
	libcups.so.2 => /lib64/libcups.so.2 (0x00007f8586b7c000)
	libcolord.so.2 => /lib64/libcolord.so.2 (0x00007f8586b21000)
	libthai.so.0 => /lib64/libthai.so.0 (0x00007f8586b16000)
	libfreetype.so.6 => /lib64/libfreetype.so.6 (0x00007f8586a4c000)
	libgraphite2.so.3 => /lib64/libgraphite2.so.3 (0x00007f8586a2d000)
	libglycin-2.so.0 => /lib64/libglycin-2.so.0 (0x00007f858660b000)
	libz.so.1 => /lib64/libz.so.1 (0x00007f85865e3000)
	libXrender.so.1 => /lib64/libXrender.so.1 (0x00007f85865d7000)
	libxcb.so.1 => /lib64/libxcb.so.1 (0x00007f85865ad000)
	libxcb-render.so.0 => /lib64/libxcb-render.so.0 (0x00007f858659e000)
	libxcb-shm.so.0 => /lib64/libxcb-shm.so.0 (0x00007f858659a000)
	libpixman-1.so.0 => /lib64/libpixman-1.so.0 (0x00007f85864e9000)
	libmount.so.1 => /lib64/libmount.so.1 (0x00007f8586493000)
	libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f8586462000)
	libffi.so.8 => /lib64/libffi.so.8 (0x00007f8586452000)
	libpcre2-8.so.0 => /lib64/libpcre2-8.so.0 (0x00007f85863a5000)
	/lib64/ld-linux-x86-64.so.2 (0x00007f8588fba000)
	libxml2.so.2 => /lib64/libxml2.so.2 (0x00007f8586245000)
	libgsttag-1.0.so.0 => /lib64/libgsttag-1.0.so.0 (0x00007f8586206000)
	libgstpbutils-1.0.so.0 => /lib64/libgstpbutils-1.0.so.0 (0x00007f85861c1000)
	libgstbase-1.0.so.0 => /lib64/libgstbase-1.0.so.0 (0x00007f858613d000)
	liborc-0.4.so.0 => /lib64/liborc-0.4.so.0 (0x00007f8586099000)
	libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f858607c000)
	libdw.so.1 => /lib64/libdw.so.1 (0x00007f8585fdf000)
	libEGL.so.1 => /lib64/libEGL.so.1 (0x00007f8585fce000)
	libGLX.so.0 => /lib64/libGLX.so.0 (0x00007f8585f9d000)
	libwayland-cursor.so.0 => /lib64/libwayland-cursor.so.0 (0x00007f8585f93000)
	libX11-xcb.so.1 => /lib64/libX11-xcb.so.1 (0x00007f8585f8f000)
	libgudev-1.0.so.0 => /lib64/libgudev-1.0.so.0 (0x00007f8585f80000)
	libdrm.so.2 => /lib64/libdrm.so.2 (0x00007f8585f69000)
	libgbm.so.1 => /lib64/libgbm.so.1 (0x00007f8585f63000)
	libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007f8585f37000)
	libdav1d.so.7 => /lib64/libdav1d.so.7 (0x00007f8585d53000)
	libjson-glib-1.0.so.0 => /lib64/libjson-glib-1.0.so.0 (0x00007f8585d26000)
	libsqlite3.so.0 => /lib64/libsqlite3.so.0 (0x00007f8585bac000)
	libwebp.so.7 => /lib64/libwebp.so.7 (0x00007f8585b26000)
	libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f8585a63000)
	libLerc.so.4 => /lib64/libLerc.so.4 (0x00007f85859ce000)
	libjbig.so.2.1 => /lib64/libjbig.so.2.1 (0x00007f85859c0000)
	liblzo2.so.2 => /lib64/liblzo2.so.2 (0x00007f8585998000)
	libgssapi_krb5.so.2 => /lib64/libgssapi_krb5.so.2 (0x00007f8585941000)
	libavahi-common.so.3 => /lib64/libavahi-common.so.3 (0x00007f8585932000)
	libavahi-client.so.3 => /lib64/libavahi-client.so.3 (0x00007f858591e000)
	libgnutls.so.30 => /lib64/libgnutls.so.30 (0x00007f8585679000)
	liblcms2.so.2 => /lib64/liblcms2.so.2 (0x00007f858560f000)
	libudev.so.1 => /lib64/libudev.so.1 (0x00007f85855c5000)
	libdatrie.so.1 => /lib64/libdatrie.so.1 (0x00007f85855bd000)
	libbz2.so.1 => /lib64/libbz2.so.1 (0x00007f85855a9000)
	libbrotlidec.so.1 => /lib64/libbrotlidec.so.1 (0x00007f858559b000)
	libseccomp.so.2 => /lib64/libseccomp.so.2 (0x00007f858556f000)
	libXau.so.6 => /lib64/libXau.so.6 (0x00007f858556a000)
	libblkid.so.1 => /lib64/libblkid.so.1 (0x00007f8585530000)
	liblzma.so.5 => /lib64/liblzma.so.5 (0x00007f85854fb000)
	libgstaudio-1.0.so.0 => /lib64/libgstaudio-1.0.so.0 (0x00007f8585476000)
	libelf.so.1 => /lib64/libelf.so.1 (0x00007f8585457000)
	libGLdispatch.so.0 => /lib64/libGLdispatch.so.0 (0x00007f85853df000)
	libexpat.so.1 => /lib64/libexpat.so.1 (0x00007f85853b4000)
	libsharpyuv.so.0 => /lib64/libsharpyuv.so.0 (0x00007f85853ac000)
	libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007f8585134000)
	libkrb5.so.3 => /lib64/libkrb5.so.3 (0x00007f8585067000)
	libk5crypto.so.3 => /lib64/libk5crypto.so.3 (0x00007f858504f000)
	libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00007f8585049000)
	libkrb5support.so.0 => /lib64/libkrb5support.so.0 (0x00007f8585039000)
	libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00007f8585033000)
	libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007f8584af1000)
	libresolv.so.2 => /lib64/libresolv.so.2 (0x00007f8584adc000)
	libdbus-1.so.3 => /lib64/libdbus-1.so.3 (0x00007f8584a88000)
	libp11-kit.so.0 => /lib64/libp11-kit.so.0 (0x00007f85848fb000)
	libidn2.so.0 => /lib64/libidn2.so.0 (0x00007f85848ab000)
	libunistring.so.5 => /lib64/libunistring.so.5 (0x00007f85846fe000)
	libtasn1.so.6 => /lib64/libtasn1.so.6 (0x00007f85846e6000)
	libhogweed.so.6 => /lib64/libhogweed.so.6 (0x00007f85846a3000)
	libnettle.so.8 => /lib64/libnettle.so.8 (0x00007f858464d000)
	libgmp.so.10 => /lib64/libgmp.so.10 (0x00007f85845a6000)
	libcap.so.2 => /lib64/libcap.so.2 (0x00007f858459a000)
	libbrotlicommon.so.1 => /lib64/libbrotlicommon.so.1 (0x00007f8584577000)
	libsystemd.so.0 => /lib64/libsystemd.so.0 (0x00007f858444d000)

⬢ [acme@toolbx perf-tools-next]$

#13 lore raw
Quoted 5 lines · Arnaldo Carvalho de Melo
Quoted 4 lines · Arnaldo Carvalho de Melo

On Wed, Sep 09, 2026 at 08:35:20AM -0300, Arnaldo Carvalho de Melo wrote:
Now, with GTK4=1 and trying to build the first patch after installing gtk4-devel on fedora 43 it fails to detect gtk4 support:

Quoted 8 lines
Quoted 8 lines

⬢ [acme@toolbx perf-tools-next]$ m
make: Entering directory '/home/acme/git/perf-tools-next/tools/perf'
BUILD: Doing 'make -j32' parallel build

Auto-detecting system features:

...                                   libdw: [ on  ]
...                                   glibc: [ on  ]

... gtk4: [ OFF ]

I removed gtk4 from FEATURES_DISPLAY, as it is opt-in, no point in telling most of the time it is OFF, when developing one can use 'make VF=1' to see if it was detected:

⬢ [acme@toolbx perf-tools-next]$ alias m='rm -rf ~/libexec/perf-core/ ; make VF=1 CORESIGHT=1 -k O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin && perf test import && cat /tmp/build/$(basename $PWD)/feature/test-all.make.output' ; export PYTHONPATH=/tmp/build/$(basename $PWD)/python ⬢ [acme@toolbx perf-tools-next]$ m
make: Entering directory '/home/acme/git/perf-tools-next/tools/perf'
BUILD: Doing 'make -j32' parallel build

Auto-detecting system features:

...                                   libdw: [ on  ]
...                                   glibc: [ on  ]
...                                  libelf: [ on  ]
...                                 libnuma: [ on  ]
...                  numa_num_possible_cpus: [ on  ]
...                               libpython: [ on  ]
...                             libcapstone: [ on  ]
...                               llvm-perf: [ on  ]
...                                    zlib: [ on  ]
...                                    lzma: [ on  ]
...                                     bpf: [ on  ]
...                                  libaio: [ on  ]
...                                 libzstd: [ on  ]
...                              libopenssl: [ on  ]
...                                    rust: [ on  ]
...                               backtrace: [ on  ]
...                                 eventfd: [ on  ]
...                          fortify-source: [ on  ]
...                                  gettid: [ on  ]
...                                  libbfd: [ on  ]
...                       libbfd-threadsafe: [ on  ]
...                       libelf-getphdrnum: [ on  ]
...                     libelf-gelf_getnote: [ on  ]
...                    libelf-getshdrstrndx: [ on  ]
...                             libelf-zstd: [ on  ]
...                                libslang: [ on  ]
...                           libtraceevent: [ on  ]
...                             libcpupower: [ on  ]
...             pthread-attr-setaffinity-np: [ on  ]
...                         pthread-barrier: [ on  ]
...                            reallocarray: [ on  ]
...                      stackprotector-all: [ on  ]
...                                 timerfd: [ on  ]
...                               scandirat: [ on  ]
...                            sched_getcpu: [ on  ]
...                                     sdt: [ on  ]
...                                   setns: [ on  ]
...                  disassembler-four-args: [ on  ]
...                disassembler-init-styled: [ on  ]
...                             file-handle: [ on  ]

... bionic: [ OFF ]
... compile-32: [ OFF ]
... compile-x32: [ OFF ]
... cplus-demangle: [ OFF ]
... cxa-demangle: [ on ]
... gtk4: [ OFF ]
... hello: [ OFF ]
... babeltrace2-ctf-writer: [ on ]
... libcapstone: [ on ]
... libcheck: [ OFF ]
... libbfd-liberty: [ OFF ]
... libbfd-liberty-z: [ OFF ]
... libopencsd: [ on ]
... libperl: [ OFF ]
... llvm: [ OFF ]
... libbpf: [ OFF ]

...                                 libpfm4: [ on  ]
...                           libdebuginfod: [ on  ]
...                         clang-bpf-co-re: [ on  ]

... bpftool-skeletons: [ OFF ]
... libunwind: [ OFF ]
... libunwind-debug-frame: [ OFF ]
... libunwind-aarch64: [ OFF ]
... libunwind-debug-frame-aarch64: [ OFF ]
... libunwind-arm: [ OFF ]
... libunwind-debug-frame-arm: [ OFF ]
... libunwind-loongarch64: [ OFF ]
... libunwind-debug-frame-loongarch64: [ OFF ]
... libunwind-mips: [ OFF ]
... libunwind-debug-frame-mips: [ OFF ]
... libunwind-ppc32: [ OFF ]
... libunwind-debug-frame-ppc32: [ OFF ]
... libunwind-ppc64: [ OFF ]
... libunwind-debug-frame-ppc64: [ OFF ]
... libunwind-riscv: [ OFF ]
... libunwind-debug-frame-riscv: [ OFF ]
... libunwind-s390x: [ OFF ]
... libunwind-debug-frame-s390x: [ OFF ]
... libunwind-x86: [ OFF ]
... libunwind-debug-frame-x86: [ OFF ]
... libunwind-x86_64: [ OFF ]
... libunwind-debug-frame-x86_64: [ OFF ]

...                                  prefix: /home/acme
...                                  bindir: /home/acme/bin
...                                  libdir: /home/acme/lib64

... sysconfdir: /home/acme/etc
... LIBUNWIND_DIR:
... LIBDW_DIR:
... JDIR: /usr/lib/jvm/java-latest-openjdk
... DWARF post unwind library: libdw

- Arnaldo

reviewer
#14 lore raw

It looks like tools/perf/Makefile.perf is missing something in the clean target to remove libperf-gtk.so.

Thanks,
Ian