drm/bridge: sii902x: Read "sil,i2s-data-lanes" as u32
Subsystems (3)
PATCH v3 1/1 drm/bridge: sii902x: Read "sil,i2s-data-lanes" as u32
The "sil,i2s-data-lanes" binding and in-tree DTS files use normal uint32 cells. Reading the array as u8 only works because the values are small, but it does not match the documented DT element size.
Use the u32 array helper so the driver follows the binding. Changing to u32 increases a potential OOB access range due to using unchecked values, so add a check on the read values.
---
v3:
- Drop the WARN_ON.
- Combine checking the values with any other error parsing the DT property. The exact DT error isn't important.
v2:
- Add bounds check for property values as reported by sashiko
--- drivers/gpu/drm/bridge/sii902x.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
drivers/gpu/drm/bridge/sii902x.c +14 -6
@@ -862,7 +862,7 @@ static int sii902x_audio_codec_init(struct sii902x *sii902x, .max_i2s_channels = 0, .no_capture_mute = 1, }; -u8 lanes[4 ]; +u32 lanes[4 ];int num_lanes, i;if (!of_property_present (dev->of_node,"#sound-dai-cells" )) {
@@ -871,10 +871,10 @@ static int sii902x_audio_codec_init(struct sii902x *sii902x,return 0 ; } - num_lanes =of_property_read_variable_u8_array (dev->of_node, -"sil,i2s-data-lanes" , - lanes,1 , -ARRAY_SIZE (lanes)); + num_lanes =of_property_read_variable_u32_array (dev->of_node, +"sil,i2s-data-lanes" , + lanes,1 , +ARRAY_SIZE (lanes));if (num_lanes == -EINVAL ) { dev_dbg(dev,
@@ -882,7 +882,15 @@ static int sii902x_audio_codec_init(struct sii902x *sii902x, __func__); num_lanes =1 ; lanes[0 ] =0 ; - }else if (num_lanes <0 ) { + }else { +for (i =0 ; i < num_lanes; i++) { +if (lanes[i] >=ARRAY_SIZE (i2s_lane_id)) { + num_lanes = -EINVAL ; +break ; + } + } + } +if (num_lanes <0 ) {dev_err (dev,"%s: Error getting \"sil,i2s-data-lanes\": %d\n" , __func__, num_lanes);
Signature · 1 line
2.53.0
Quoted 16 lines · Rob Herring (Arm)
The "sil,i2s-data-lanes" binding and in-tree DTS files use normal uint32 cells. Reading the array as u8 only works because the values are small, but it does not match the documented DT element size.
Use the u32 array helper so the driver follows the binding. Changing to u32 increases a potential OOB access range due to using unchecked values, so add a check on the read values.
Signed-off-by Rob Herring (Arm) <[email protected]>---
v3:
- Drop theWARN_ON.
- Combine checking the values with any other error parsing the DT property. The exact DT error isn't important.
Quoted 5 lines
v2:
- Add bounds check for property values as reported by sashiko--- drivers/gpu/drm/bridge/sii902x.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
Ping. Can I get an ack on this to apply it.
Rob
Quoted 17 lines · Rob Herring
Quoted 16 lines · Rob Herring (Arm)
The "sil,i2s-data-lanes" binding and in-tree DTS files use normal uint32 cells. Reading the array as u8 only works because the values are small, but it does not match the documented DT element size.
Use the u32 array helper so the driver follows the binding. Changing to u32 increases a potential OOB access range due to using unchecked values, so add a check on the read values.
Signed-off-by Rob Herring (Arm) <[email protected]>---
v3:
- Drop theWARN_ON.
- Combine checking the values with any other error parsing the DT property. The exact DT error isn't important.
Quoted 7 lines
Quoted 5 lines
v2:
- Add bounds check for property values as reported by sashiko--- drivers/gpu/drm/bridge/sii902x.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)Ping. Can I get an ack on this to apply it.
Alternatively, I can apply it to the drm-misc tree
Maxime