net: phy: broadcom: add support for BCM89610 PHY
Subsystems (4)
PATCH 1/2 net: phy: broadcom: add support for BCM89610 PHY
It adds support for BCM89610 (Single-Port 10/100/1000BASE-T) transceiver which is used in P3310 Tegra186 platform.
--- drivers/net/phy/broadcom.c | 11 +++++++++++ include/linux/brcmphy.h | 1 + 2 files changed, 12 insertions(+)
drivers/net/phy/broadcom.c +11 -0
@@ -720,6 +720,16 @@ static struct phy_driver broadcom_drivers[] = { .get_strings = bcm_phy_get_strings, .get_stats = bcm53xx_phy_get_stats, .probe = bcm53xx_phy_probe, +}, { + .phy_id = PHY_ID_BCM89610, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM89610", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_INTERRUPT, + .config_init = bcm54xx_config_init, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, } };module_phy_driver (broadcom_drivers);
@@ -741,6 +751,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = { { PHY_ID_BCMAC131, 0xfffffff0 }, { PHY_ID_BCM5241, 0xfffffff0 }, { PHY_ID_BCM5395, 0xfffffff0 }, + { PHY_ID_BCM89610, 0xfffffff0 }, { } };
include/linux/brcmphy.h +1 -0
@@ -25,6 +25,7 @@#define PHY_ID_BCM54612E 0x03625e60#define PHY_ID_BCM54616S 0x03625d10#define PHY_ID_BCM57780 0x03625d90 +#define PHY_ID_BCM89610 0x03625cd0#define PHY_ID_BCM7250 0xae025280#define PHY_ID_BCM7260 0xae025190
Signature · 1 line
2.7.4
Hi,
Quoted 43 lines · Bhadram Varka
It adds support for BCM89610 (Single-Port 10/100/1000BASE-T) transceiver which is used in P3310 Tegra186 platform.
Signed-off-by Bhadram Varka <[email protected]>--- drivers/net/phy/broadcom.c | 11 +++++++++++ include/linux/brcmphy.h | 1 + 2 files changed, 12 insertions(+)drivers/net/phy/broadcom.c +11
-0@@ -720,6 +720,16 @@ static struct phy_driver broadcom_drivers[] = { .get_strings = bcm_phy_get_strings, .get_stats = bcm53xx_phy_get_stats, .probe = bcm53xx_phy_probe, +}, { + .phy_id = PHY_ID_BCM89610, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM89610", + .features = PHY_GBIT_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_HAS_INTERRUPT, + .config_init = bcm54xx_config_init, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, } };module_phy_driver (broadcom_drivers);@@ -741,6 +751,7 @@ static struct mdio_device_id __maybe_unused broadcom_tbl[] = { { PHY_ID_BCMAC131, 0xfffffff0 }, { PHY_ID_BCM5241, 0xfffffff0 }, { PHY_ID_BCM5395, 0xfffffff0 }, + { PHY_ID_BCM89610, 0xfffffff0 }, { } };include/linux/brcmphy.h +0
-0
include/linux/brcmphy.h line 31
Quoted 7 lines
include/linux/brcmphy.h +1
-0@@ -25,6 +25,7 @@#define PHY_ID_BCM54612E 0x03625e60#define PHY_ID_BCM54616S 0x03625d10#define PHY_ID_BCM57780 0x03625d90 +#define PHY_ID_BCM89610 0x03625cd0#define PHY_ID_BCM7250 0xae025280#define PHY_ID_BCM7260 0xae025190
Please discard this patch. Pushed other patch with proper subject prefix ([PATCH net-next] net: phy: broadcom: add support for BCM89610 PHY)
Thanks,
Bhadram.
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------