Skip to contentSkip to conversation

: Audigy2NX: Channels interchanged

ALSA - driver 0001111 [email protected] 1 participant 1 message Jun 24, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1111>
======================================================================

Reported By:                fabian
Assigned To:                Clemens Ladisch
======================================================================
Project:                    ALSA - driver
Issue ID:                   1111
Category:                   USB - usb-audio
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     assigned
Distribution:               
Kernel Version:             2.6.11.9
======================================================================
Date Submitted:             05-14-2005 17:34 CEST
Last Modified:              06-24-2005 09:29 CEST

======================================================================
Summary: Audigy2NX: Channels interchanged
Description:
Hi

I recently bought an Audigy2NX for my Laptop to use my Creative Inspire 5300 5.1 System. I configured around a little bit, and tried to simulate 5.1 sound with stereo-mp3s by copying the audiostreams using TTable. I got very confusing results so I tried speaker-test.

speaker-test -D default -c 6 -f 300 -p 300

default is, cause I have to resample output to 48k to get correct sound:

1. Problem:
The confusing thing is that I noticed that the rear speakers are interchanged with the subwoofer/center speaker. First I thought I made a mistake with the plugs, but I checked everything: I only get the correct output, when I plug the black chord for rear speaker in "Sub/center" on the Audigy and vice versa.

Little other problems:
* The Master volume adjustor on the card itself doesn't work.
* When I use the "Mute" button on the card, I only can unmute in software
* The channels in "Alsamixer" are named very confusingly:
Speaker
Speaker1
Speaker2
Speaker2
Speaker2
Speaker2
Speaker3 (is a switch)
How does Alsamixer get the labels for the channels? Can one rename the channels anywhere?

And a question:
* Will the remote control work someday?

And the last thing I want to say: I got in touch with ALSA today the first time, and I'm fascinated about the things you can do especially in asound.conf. Great great great Work! :-)

greetings
fabian

PS:
My /etc/asound.conf:

pcm.intel8x0 {
type hw
card 0
}

ctl.intel8x0 {
type hw
card 0
}

pcm.Audigy2NX {
type hw
card 1
}

ctl.Audigy2NX {
type hw
card 1
}

pcm.!default {
        type plug
        slave {
                pcm Audigy2NX
                rate 48000
        }
}
ctl.!default {
        type plug
        slave {
                ctl Audigy2NX
                rate 48000
        }
}

======================================================================

----------------------------------------------------------------------
Clemens Ladisch - 06-24-05 09:29
----------------------------------------------------------------------
ALSA 1.0.9 has better control names, and you don't need the 48 kHz hack anymore.

The remote control is supported with the alsa_usb driver in the CVS version of LIRC.

Issue History
Date Modified Username Field Change
======================================================================
05-14-05 17:34 fabian New Issue
05-14-05 17:34 fabian Kernel Version => 2.6.11.9
06-24-05 09:29 Clemens LadischNote Added: 0005206
======================================================================

-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click