Skip to contentSkip to conversation

rockchip: rk3568: Add support for LinkEase EasePi R1

PATCH Superseded Liangbin Lian 2 participants 7 messages May 12 – Jun 25

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover rockchip: rk3568: Add support for LinkEase EasePi R1

LinkEase EasePi R1 [1] is a high-performance mini router.

Specification:
- Rockchip RK3568
- 2GB/4GB LPDDR4 RAM
- 16GB on-board eMMC
- 1x M.2 key for 2280 NVMe (PCIe 3.0)
- 1x USB 3.0 Type-A
- 1x USB 2.0 Type-C (for USB flashing)
- 2x 1000 Base-T (native, RTL8211F)
- 2x 2500 Base-T (PCIe, RTL8125B)
- 1x HDMI 2.0 Output
- 12v DC Jack
- 1x Power key connected to PMIC
- 2x LEDs (one static power supplied, one GPIO controlled)

[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html

---

Liangbin Lian (1):
rockchip: rk3568: Add support for LinkEase EasePi R1

 arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi |  7 ++
 board/rockchip/evb_rk3568/MAINTAINERS     |  6 ++
 configs/easepi-r1-rk3568_defconfig        | 82 +++++++++++++++++++++++
 doc/board/rockchip/rockchip.rst           |  1 +
 4 files changed, 96 insertions(+)
 create mode 100644 arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi
 create mode 100644 configs/easepi-r1-rk3568_defconfig

base-commit: 5732bd0f457b4c671e46574d64d4acb099c0f0a5

Signature · 1 line
2.51.0
#1 lore raw

PATCH 1/1 rockchip: rk3568: Add support for LinkEase EasePi R1

LinkEase EasePi R1 [1] is a high-performance mini router.

Specification:
- Rockchip RK3568
- 2GB/4GB LPDDR4 RAM
- 16GB on-board eMMC
- 1x M.2 key for 2280 NVMe (PCIe 3.0)
- 1x USB 3.0 Type-A
- 1x USB 2.0 Type-C (for USB flashing)
- 2x 1000 Base-T (native, RTL8211F)
- 2x 2500 Base-T (PCIe, RTL8125B)
- 1x HDMI 2.0 Output
- 12v DC Jack
- 1x Power key connected to PMIC
- 2x LEDs (one static power supplied, one GPIO controlled)

[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html

---
 arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi |  7 ++
 board/rockchip/evb_rk3568/MAINTAINERS     |  6 ++
 configs/easepi-r1-rk3568_defconfig        | 82 +++++++++++++++++++++++
 doc/board/rockchip/rockchip.rst           |  1 +
 4 files changed, 96 insertions(+)
 create mode 100644 arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi
 create mode 100644 configs/easepi-r1-rk3568_defconfig
arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi new file +7 -0
new file mode 100644
index 000000000..dc0e0eb7e
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * (C) Copyright 2021 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2026 Liangbin Lian <[email protected]>
+ */
+
+#include "rk356x-u-boot.dtsi"
board/rockchip/evb_rk3568/MAINTAINERS +6 -0
index 030cdbe6f..4dfc3d870 100644
@@ -5,6 +5,12 @@ F:	configs/bpi-r2-pro-rk3568_defconfig
 F:	arch/arm/dts/rk3568-bpi-r2-pro.dts
 F:	arch/arm/dts/rk3568-bpi-r2-pro-u-boot.dtsi
 
+EASEPI-R1
+M:	Liangbin Lian <[email protected]>
+S:	Maintained
+F:	configs/easepi-r1-rk3568_defconfig
+F:	arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi
+
 EVB-RK3568
 M:	Joseph Chen <[email protected]>
 S:	Maintained
configs/easepi-r1-rk3568_defconfig new file +82 -0

82 lines not on this page · raw message

doc/board/rockchip/rockchip.rst +1 -0
index 141071f52..a2c7c80b8 100644
@@ -133,6 +133,7 @@ List of mainline supported Rockchip boards:
      - FriendlyElec NanoPi R5S (nanopi-r5s-rk3568)
      - Generic RK3566/RK3568 (generic-rk3568)
      - Hardkernel ODROID-M1 (odroid-m1-rk3568)
+     - LinkEase EasePi R1 (easepi-r1-rk3568)
      - Lunzn FastRhino R66S (fastrhino-r66s-rk3568)
      - QNAP TS-433 (qnap-ts433-rk3568)
      - Radxa E25 Carrier Board (radxa-e25-rk3568)
Signature · 1 line
2.51.0
#2 lore raw

Hi Liangbin Lian,

Quoted 16 lines · Liangbin Lian

LinkEase EasePi R1 [1] is a high-performance mini router.

Specification:
- Rockchip RK3568
- 2GB/4GB LPDDR4 RAM
- 16GB on-board eMMC
- 1x M.2 key for 2280 NVMe (PCIe 3.0)
- 1x USB 3.0 Type-A
- 1x USB 2.0 Type-C (for USB flashing)
- 2x 1000 Base-T (native, RTL8211F)
- 2x 2500 Base-T (PCIe, RTL8125B)
- 1x HDMI 2.0 Output
- 12v DC Jack
- 1x Power key connected to PMIC
- 2x LEDs (one static power supplied, one GPIO controlled)

Quoted 2 lines

[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html

Note that this link times out on my side.

Quoted 16 lines
---
  arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi |  7 ++
  board/rockchip/evb_rk3568/MAINTAINERS     |  6 ++
  configs/easepi-r1-rk3568_defconfig        | 82 +++++++++++++++++++++++
  doc/board/rockchip/rockchip.rst           |  1 +
  4 files changed, 96 insertions(+)

create mode 100644 arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi create mode 100644 configs/easepi-r1-rk3568_defconfig

arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi new file +0 -0
new file mode 100644
index 000000000..dc0e0eb7e

arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi line 7

Quoted 7 lines
arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi new file +7 -0
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * (C) Copyright 2021 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2026 Liangbin Lian <[email protected]>
+ */
+
+#include "rk356x-u-boot.dtsi"

This file is not necessary. When rk3568-easepi-r1-u-boot.dtsi is missing, rk3568-u-boot.dtsi will be automatically included, which in turn automatically includes rk356x-u-boot.dtsi.

board/rockchip/evb_rk3568/MAINTAINERS F: configs/bpi-r2-pro-rk3568_defconfig · line 12

Quoted 13 lines
board/rockchip/evb_rk3568/MAINTAINERS +5 -0
index 030cdbe6f..4dfc3d870 100644
@@ -5,6 +5,12 @@ F:	configs/bpi-r2-pro-rk3568_defconfig
  F:	arch/arm/dts/rk3568-bpi-r2-pro.dts
  F:	arch/arm/dts/rk3568-bpi-r2-pro-u-boot.dtsi
 
+EASEPI-R1
+M:	Liangbin Lian <[email protected]>
+S:	Maintained
+F:	configs/easepi-r1-rk3568_defconfig
+F:	arch/arm/dts/rk3568-easepi-r1-u-boot.dtsi

Then you don't need this line either.

Quoted 18 lines
board/rockchip/evb_rk3568/MAINTAINERS +1 -0
+
  EVB-RK3568
  M:	Joseph Chen <[email protected]>
  S:	Maintained
configs/easepi-r1-rk3568_defconfig new file +8 -0
new file mode 100644
index 000000000..c76960379
@@ -0,0 +1,82 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_COUNTER_FREQUENCY=24000000
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3568-easepi-r1"
+CONFIG_ROCKCHIP_RK3568=y
+CONFIG_SPL_SERIAL=y

configs/easepi-r1-rk3568_defconfig line 18

Quoted 10 lines
configs/easepi-r1-rk3568_defconfig new file +10 -0
+CONFIG_SYS_LOAD_ADDR=0xc00800
+CONFIG_DEBUG_UART_BASE=0xFE660000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_PCI=y
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y

Do you really need this?

Quoted 10 lines
configs/easepi-r1-rk3568_defconfig new file +10 -0
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-easepi-r1.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x40000
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_ATF=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y

configs/easepi-r1-rk3568_defconfig line 38

Quoted 10 lines
configs/easepi-r1-rk3568_defconfig new file +10 -0
+CONFIG_CMD_PCI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"

Do you really need to remove clock-names from the xPL DTB? I know most Rockchip configs do it but I think it's mostly because everybody's copying everybody :)

Looking good otherwise, thanks for the patch!

Cheers,
Quentin

#4 lore raw

Hi,

Quoted 4 lines · Liangbin Lian

Hi Quentin,

Quoted 2 lines
Quoted 1 line

+CONFIG_LEGACY_IMAGE_FORMAT=y

Quoted 8 lines
Quoted 1 line

Do you really need this?

I found mkimage -A $INITRD_ARCH -O linux -T ramdisk -C gzip -n uInitrd -d $2 $tempname in the Armbian code [1], so CONFIG_LEGACY_IMAGE_FORMAT=y should still be needed, right?

[1] https://github.com/armbian/build/blob/main/packages/bsp/common/etc/initramfs/post-update.d/99-uboot

Seems you could be right since they add it for a couple of boards defconfigs via patches, c.f. patch/u-boot/u-boot-genio/0003-GENIO-configs-genio-350-720-evk-Enable-LEGACY_IMAGE_.patch and patch/u-boot/u-boot-tqma/0005-add-LEGACY_IMAGE_FORMAT.patch.

So I guess it's "fine" (although you won't be able to do a proper secure boot with this enabled). So you can keep it in.

Thanks for the pointer!

Cheers,
Quentin

#5 lore raw

Hi Quentin,

Quoted 2 lines

So I guess it's "fine" (although you won't be able to do a proper secure boot with this enabled). So you can keep it in.

I discovered that OpenWRT is still using the legacy U-Boot image file format script [1], too.
And the source command for executing this type script also requires
CONFIG_LEGACY_IMAGE_FORMAT=y [2].

Therefore, CONFIG_LEGACY_IMAGE_FORMAT=y is still required in many open-source projects.
(Actually, Armbian also used the legacy U-Boot image file format script)

[1] https://github.com/openwrt/openwrt/blob/7edb29d241dbd4acd0a716a3735dedd5ac3b36e2/target/linux/rockchip/image/Makefile#L24
[2] https://github.com/u-boot/u-boot/blob/master/doc/usage/cmd/source.rst

Cheers,
Liangbin

#6 lore raw
In reply to Quentin Schulz

Hi Quentin,

Quoted 4 lines
Quoted 2 lines

[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html

Note that this link times out on my side.

It's possible that Chinese ISPs are blocking access this link from overseas (accessing this link from China is normal).

This link introduces the EasePi R1 hardware configuration and link to schematic of the EasePi R1.

The EasePi R1's DTS has actually been merged into Linux 6.19
and has been tested in OpenWRT, so this link is probably not that important.

Schematic of EasePi R1:
https://assets.koolcenter.com/easepi/Easepi-R1-SCH.pdf

Quoted 3 lines

Do you really need to remove clock-names from the xPL DTB? I know most Rockchip configs do it but I think it's mostly because everybody's copying everybody :)

You are right, this code was actually copied from nanopi r5c :) I will check that can be removed.

I will also check and fix other issues. If there are no problems after the fixes, I will submit a new version.

Thanks!

Cheers,
Liangbin