Skip to contentSkip to conversation

gma500_gfx: Avoid inserting gma500_gfx module for certain devices

PATCH In review Alejandro Hernandez 2 participants 2 messages Oct 5, 2015 – Nov 12, 2015 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH 1/1 gma500_gfx: Avoid inserting gma500_gfx module for certain devices

The gma500_gfx driver will match certain devices on which it causes incorrect functionality, we want to avoid inserting this module, basicallly blacklist it for specific hardware,
but still allow it to work on other hardware by default; usually when we have an already working system, using udev rules would do the job, but since we are building it, it is impossible to blacklist a driver when a certain udev rule matches, since rootfs isn't writeable at this point during boot time, the solution is to use modprobe install, which runs a certain command instead of inserting a matching module, this command needs to insert the module manually afterwards and have a flag --ignore-install so it doesnt create an infinite loop executing itself everytime it wants to insert the module, busybox's modprobe doesn't provide this functionality, so a small hack had to be used to avoid the infite loop instead.

---
 meta-yocto-bsp/conf/machine/genericx86.conf            |  2 ++
 .../gma500-gfx-check/gma500-gfx-check.conf             |  2 ++
 .../gma500-gfx-check/gma500-gfx-check.sh               | 11 +++++++++++
 .../gma500-gfx-check/gma500-gfx-check_1.0.bb           | 18 ++++++++++++++++++
 4 files changed, 33 insertions(+)
 create mode 100644 meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.conf
 create mode 100644 meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.sh
 create mode 100644 meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check_1.0.bb
meta-yocto-bsp/conf/machine/genericx86.conf +2 -0
index 2642cab..798b62ec 100644
@@ -6,3 +6,5 @@
 DEFAULTTUNE ?= "core2-32"
 require conf/machine/include/tune-core2.inc
 require conf/machine/include/genericx86-common.inc
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "gma500-gfx-check"
meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.conf new file +2 -0
new file mode 100644
index 0000000..69f109e
@@ -0,0 +1,2 @@
+# Mimic modprobe's install funcitonality with busybox's modprobe
+install gma500_gfx lsmod | grep gma || { gma500_gfx_check.sh || modprobe gma500_gfx; }
meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check/gma500-gfx-check.sh new file +11 -0
new file mode 100644
index 0000000..0c7b3aa
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+# Check for devices we wish to avoid gma500_gfx for
+DEVICES="0x8119 0x4108"
+for DEVICE in $DEVICES; do
+    if udevadm trigger --subsystem-match=pci --verbose --attr-match=device=$DEVICE | grep "pci" >> /dev/null ; then
+        echo "Found $DEVICE, avoiding gma500_gfx module" >> /dev/kmsg;
+        exit 0
+    fi
+done
+exit 1
meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx-check_1.0.bb new file +18 -0
new file mode 100644
index 0000000..00680de
@@ -0,0 +1,18 @@
+SUMMARY = "Intel gma500_gfx fix for certain hardware"
+DESCRIPTION = "Avoid inserting gma500_gfx module for certain hardware devices."
+LICENSE="GPLv2"
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"
+
+SRC_URI = "file://gma500-gfx-check.conf \
+	file://gma500-gfx-check.sh "
+
+do_install(){
+    install -d ${D}${sysconfdir}/modprobe.d/
+    install -m 755 ${WORKDIR}/gma500-gfx-check.sh ${D}${sysconfdir}/modprobe.d/gma500-gfx-check.sh
+    install -m 644 ${WORKDIR}/gma500-gfx-check.conf ${D}${sysconfdir}/modprobe.d/gma500-gfx-check.conf
+}
+
+FILES_${PN}="${sysconfdir}/modprobe.d/gma500-gfx-check.conf \
+             ${sysconfdir}/modprobe.d/gma500-gfx-check.sh"
+
+COMPATIBLE_MACHINE = "genericx86"
Signature · 1 line
1.8.4.5
Acked-by on v1 1/1
#2 lore raw
Quoted 20 lines · Alejandro Hernandez

The gma500_gfx driver will match certain devices on which it causes incorrect functionality,
we want to avoid inserting this module, basicallly blacklist it for specific hardware,
but still allow it to work on other hardware by default; usually when we have an already working system,
using udev rules would do the job, but since we are building it, it is impossible to blacklist
a driver when a certain udev rule matches, since rootfs isn't writeable at this point during boot time,
the solution is to use modprobe install, which runs a certain command instead of inserting a matching module,
this command needs to insert the module manually afterwards and have a flag --ignore-install
so it doesnt create an infinite loop executing itself everytime it wants to insert the module,
busybox's modprobe doesn't provide this functionality, so a small hack had to be used to avoid
the infite loop instead.

Quoted 2 lines

Signed-off-by: Alejandro Hernandez
<[email protected]>

Quoted 94 lines

---
 meta-yocto-bsp/conf/machine/genericx86.conf            |  2 ++ .../gma500-gfx-check/gma500-gfx-check.conf             |  2 ++ .../gma500-gfx-check/gma500-gfx-check.sh               | 11
+++++++++++
 .../gma500-gfx-check/gma500-gfx-check_1.0.bb           | 18
++++++++++++++++++

 4 files changed, 33 insertions(+)

 create mode 100644 meta-yocto-bsp/recipes-bsp/gma500-gfx- check/gma500-gfx-check/gma500-gfx-check.conf create mode 100644 meta-yocto-bsp/recipes-bsp/gma500-gfx- check/gma500-gfx-check/gma500-gfx-check.sh
 create mode 100644 meta-yocto-bsp/recipes-bsp/gma500-gfx- check/gma500-gfx-check_1.0.bb

meta- renamed from meta-yocto-bsp/conf/machine/genericx86.conf +0 -0

yocto-bsp/conf/machine/genericx86.conf
index 2642cab..798b62ec 100644

meta-yocto-bsp/conf/machine/genericx86.conf +0 -0
@@ -6,3 +6,5 @@

 DEFAULTTUNE ?= "core2-32"
 require conf/machine/include/tune-core2.inc require conf/machine/include/genericx86-common.inc

meta-yocto-bsp/conf/machine/genericx86.conf +2 -0
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "gma500-gfx-check"
(quoted diff) +0 -0

check/gma500-gfx-check.conf b/meta-yocto-bsp/recipes-bsp/gma500-gfx- check/gma500-gfx-check/gma500-gfx-check.conf
new file mode 100644
index 0000000..69f109e

meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx- new file +0 -0

check/gma500-gfx-check.conf

meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx- new file +2 -0
@@ -0,0 +1,2 @@
+# Mimic modprobe's install funcitonality with busybox's modprobe
+install gma500_gfx lsmod | grep gma || { gma500_gfx_check.sh ||

modprobe gma500_gfx; }

(quoted diff) +0 -0

check/gma500-gfx-check.sh b/meta-yocto-bsp/recipes-bsp/gma500-gfx- check/gma500-gfx-check/gma500-gfx-check.sh
new file mode 100644
index 0000000..0c7b3aa

meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx- new file +0 -0

check/gma500-gfx-check.sh

meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx- new file +6 -0
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+# Check for devices we wish to avoid gma500_gfx for
+DEVICES="0x8119 0x4108"
+for DEVICE in $DEVICES; do
+    if udevadm trigger --subsystem-match=pci --verbose --attr-

match=device=$DEVICE | grep "pci" >> /dev/null ; then +        echo "Found $DEVICE, avoiding gma500_gfx module" >> /dev/kmsg;
+        exit 0
+    fi

meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx- new file +2 -0
+done
+exit 1
(quoted diff) +0 -0

check_1.0.bb b/meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500- gfx-check_1.0.bb
new file mode 100644
index 0000000..00680de

meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx- new file +0 -0

check_1.0.bb

meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx- new file +2 -0
@@ -0,0 +1,18 @@
+SUMMARY = "Intel gma500_gfx fix for certain hardware"
+DESCRIPTION = "Avoid inserting gma500_gfx module for certain

hardware devices."

meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx- new file +2 -0
+LICENSE="GPLv2"
+LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-

licenses/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"

meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx- new file +7 -0
+
+SRC_URI = "file://gma500-gfx-check.conf \
+	file://gma500-gfx-check.sh "
+
+do_install(){
+    install -d ${D}${sysconfdir}/modprobe.d/
+    install -m 755 ${WORKDIR}/gma500-gfx-check.sh

${D}${sysconfdir}/modprobe.d/gma500-gfx-check.sh +    install -m 644 ${WORKDIR}/gma500-gfx-check.conf ${D}${sysconfdir}/modprobe.d/gma500-gfx-check.conf

meta-yocto-bsp/recipes-bsp/gma500-gfx-check/gma500-gfx- new file +6 -0
+}
+
+FILES_${PN}="${sysconfdir}/modprobe.d/gma500-gfx-check.conf \
+             ${sysconfdir}/modprobe.d/gma500-gfx-check.sh"
+
+COMPATIBLE_MACHINE = "genericx86"
Signature · 1 line
1.8.4.5