Skip to contentSkip to conversation

Sparc IDE in 2.4.20

DISCUSSION John Bradford 4 participants 4 messages Feb 14, 2003 – Feb 15, 2003 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 5 lines

Is IDE known to be broken on Sparc in 2.4.20? I just got this compile failiure:
sparc-linux-ld -T arch/sparc/vmlinux.lds arch/sparc/kernel/head.o arch/sparc/kernel drivers/ide/idedriver.o: In function `ide_end_drive_cmd':
drivers/ide/idedriver.o(.text+0x11d4): undefined reference to `inw_p'

I tested it in 2.4.7 for the last time. It probably bitrotted. Why do you care? I posess the only IDE capable sparc on this planet. Just configure it out, and be happy.

Are you sure you did not want to compile for sparc64, hint, hint?

-- Pete

#2 lore raw
Quoted 10 lines
Quoted 6 lines

Is IDE known to be broken on Sparc in 2.4.20? I just got this compile failiure:
sparc-linux-ld -T arch/sparc/vmlinux.lds arch/sparc/kernel/head.o arch/sparc/kernel
drivers/ide/idedriver.o: In function `ide_end_drive_cmd':
drivers/ide/idedriver.o(.text+0x11d4): undefined reference to `inw_p'

I tested it in 2.4.7 for the last time. It probably bitrotted. Why do you care? I posess the only IDE capable sparc on this planet. Just configure it out, and be happy.

I'm thinking of building a machine based around Sun's Netra AX-1105 motherboard, which I thought had a supported IDE controller built in, but I could be wrong.

Quoted 1 line

Are you sure you did not want to compile for sparc64, hint, hint?

Oh, I'm just testing my newly compiled Sparc cross compiler :-), I will be compiling for sparc64 eventually. I've decided not to use any Linux distribution on the new box, and instead just to build it up from scratch, but at the moment, I'm still trying to build a native Sparc GCC on an X86 box, (as opposed to a cross-compiler).

John.

#3 lore raw
Quoted 7 lines · John Bradford
Quoted 7 lines
Quoted 6 lines

Is IDE known to be broken on Sparc in 2.4.20? I just got this compile failiure:
sparc-linux-ld -T arch/sparc/vmlinux.lds arch/sparc/kernel/head.o arch/sparc/kernel
drivers/ide/idedriver.o: In function `ide_end_drive_cmd':
drivers/ide/idedriver.o(.text+0x11d4): undefined reference to `inw_p'

Quoted 9 lines
Quoted 3 lines

I tested it in 2.4.7 for the last time. It probably bitrotted. Why do you care? I posess the only IDE capable sparc on this planet. Just configure it out, and be happy.

I'm thinking of building a machine based around Sun's Netra AX-1105 motherboard, which I thought had a supported IDE controller built in, but I could be wrong.

Got a nifty little SunBlade 100 on my desk at work, though it is running Solaris. This system has IDE disks so there must be more than one IDE capable Sparc on this planet :-)

Signature · 1 line
Andreas Steinmetz
#4 lore raw
Quoted 3 lines · Andreas Steinmetz

Got a nifty little SunBlade 100 on my desk at work, though it is running Solaris. This system has IDE disks so there must be more than one IDE capable Sparc on this planet :-)

It's sparc64. I fell into this trap, too. :-) (Having an Ultra AXE humming along under Solaris 8).

Regards
Henning

Signature · 5 lines
Dipl.-Inf. (Univ.) Henning P. Schmiedehausen          INTERMETA GmbH
[email protected]        +49 9131 50 654 0   http://www.intermeta.de/

Java, perl, Solaris, Linux, xSP Consulting, Web Services 
freelance consultant -- Jakarta Turbine Development  -- hero for hire