Skip to contentSkip to conversation

Adding a drive, and OS

dm-crypt Suresh Govindachar 1 participant 1 message Apr 24, 2020 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hello,

Current state: Laptop with 1 TB encrypted drive running Ubuntu 16.04. (The first few lines from luksDump and the output from lsblk, blkid, and df -h is attached below.)

Would like a add a new 2 TB drive that is also encrypted and install 20.04 on it. Would like to keep the 16.04 alive till I have used 20.04 for a few months.

I came across these instructions: https://www.erianna.com/adding-an-secondary-encrypted-drive-with-lvm-to-ubuntu-linux/

Questions:

1) Would it be good to follow those instructions, especially given that I intend to install 20.04 on the new drive?

2) Or should I remove the 1 TB drive, add the new drive and install 20.04 on it. Then put both drives and boot -- and then do what to get an unified view of the two separately encrypted drives?

3) Or should I just add the new drive, boot from a 20.04 USB and install on the new drive, with the installation steps taking care of whatever would need to be done? If so, what would be the options to select during the install?

Thanks.

sudo cryptsetup luksDump /dev/nvme0n1p3

  Version:      1
  Cipher name:  aes
  Cipher mode:  xts-plain64
  Hash spec:    sha256

sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
nvme0n1 259:0 0 953.9G 0 disk
├─nvme0n1p3 259:3 0 952.9G 0 part
│ └─nvme0n1p3_crypt 253:0 0 952.9G 0 crypt
│ ├─ubuntu--vg-root 253:1 0 867.5G 0 lvm /
│ └─ubuntu--vg-swap_1 253:2 0 63.9G 0 lvm [SWAP]
├─nvme0n1p1 259:1 0 512M 0 part /boot/efi
└─nvme0n1p2 259:2 0 488M 0 part /boot

sudo blkid

    /dev/mapper/nvme0n1p3_crypt: UUID="xyz1" TYPE="LVM2_member"
    /dev/mapper/ubuntu--vg-root: UUID="xyz2" TYPE="ext4"
    /dev/nvme0n1p1: UUID="xyz3" TYPE="vfat" PARTLABEL="EFI System 
Partition" PARTUUID="xyz10"
    /dev/nvme0n1p2: UUID="xyz4" TYPE="ext2" PARTUUID="xyz8"
    /dev/nvme0n1p3: UUID="xyz5" TYPE="crypto_LUKS" PARTUUID="xyz9"
    /dev/mapper/ubuntu--vg-swap_1: UUID="xyz6" TYPE="swap"
    /dev/nvme0n1: PTUUID="xyz7" PTTYPE="gpt"

df -h
Filesystem Size Used Avail Use% Mounted on
udev 32G 0 32G 0% /dev
tmpfs 6.3G 58M 6.3G 1% /run
/dev/mapper/ubuntu--vg-root 854G 659G 152G 82% /
tmpfs 32G 452M 31G 2% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 32G 0 32G 0% /sys/fs/cgroup
/dev/nvme0n1p2 473M 136M 313M 31% /boot
/dev/nvme0n1p1 511M 24M 488M 5% /boot/efi
tmpfs 6.3G 124K 6.3G 1% /run/user/11098