ASoC: rt5682s: Add driver for ALC5682I-VS codec
Subsystems (4)
PATCH RESEND v2 1/2 ASoC: rt5682s: Add driver for ALC5682I-VS codec
From: Derek Fang <[email protected]>
This is an initial codec driver for Realtek ALC5682I-VS codec.
--- include/sound/rt5682s.h | 48 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt5682s.c | 3188 ++++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt5682s.h | 1455 ++++++++++++++++ 5 files changed, 4698 insertions(+) create mode 100644 include/sound/rt5682s.h create mode 100644 sound/soc/codecs/rt5682s.c create mode 100644 sound/soc/codecs/rt5682s.h
include/sound/rt5682s.h new file +48 -0
@@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* +* linux/sound/rt5682s.h -- Platform data for RT5682I-VS +* +* Copyright 2021 Realtek Microelectronics +*/ + +#ifndef __LINUX_SND_RT5682S_H +#define __LINUX_SND_RT5682S_H + +enum rt5682s_dmic1_data_pin { +RT5682S_DMIC1_DATA_NULL , +RT5682S_DMIC1_DATA_GPIO2 , +RT5682S_DMIC1_DATA_GPIO5 , +}; + +enum rt5682s_dmic1_clk_pin { +RT5682S_DMIC1_CLK_NULL , +RT5682S_DMIC1_CLK_GPIO1 , +RT5682S_DMIC1_CLK_GPIO3 , +}; + +enum rt5682s_jd_src { +RT5682S_JD_NULL , +RT5682S_JD1 , +}; + +enum rt5682s_dai_clks { +RT5682S_DAI_WCLK_IDX , +RT5682S_DAI_BCLK_IDX , +RT5682S_DAI_NUM_CLKS , +}; + +struct rt5682s_platform_data { + +int ldo1_en;/* GPIO for LDO1_EN */ + +enum rt5682s_dmic1_data_pin dmic1_data_pin; +enum rt5682s_dmic1_clk_pin dmic1_clk_pin; +enum rt5682s_jd_src jd_src; +unsigned int dmic_clk_rate; +unsigned int dmic_delay; +bool dmic_clk_driving_high; + +const char *dai_clk_names[RT5682S_DAI_NUM_CLKS ]; +}; + +#endif
sound/soc/codecs/Kconfig +5 -0
@@ -180,6 +180,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_RT5677 imply SND_SOC_RT5682_I2C imply SND_SOC_RT5682_SDW + imply SND_SOC_RT5682S imply SND_SOC_RT700_SDW imply SND_SOC_RT711_SDW imply SND_SOC_RT711_SDCA_SDW
@@ -1249,6 +1250,10 @@ config SND_SOC_RT5682_SDW select SND_SOC_RT5682 select REGMAP_SOUNDWIRE +config SND_SOC_RT5682S + tristate + depends on I2C + config SND_SOC_RT700 tristate
sound/soc/codecs/Makefile +2 -0
@@ -198,6 +198,7 @@ snd-soc-rt5677-spi-objs := rt5677-spi.o snd-soc-rt5682-objs := rt5682.o snd-soc-rt5682-sdw-objs := rt5682-sdw.o snd-soc-rt5682-i2c-objs := rt5682-i2c.o +snd-soc-rt5682s-objs := rt5682s.o snd-soc-rt700-objs := rt700.o rt700-sdw.o snd-soc-rt711-objs := rt711.o rt711-sdw.o snd-soc-rt711-sdca-objs := rt711-sdca.o rt711-sdca-sdw.o
@@ -526,6 +527,7 @@ obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o obj-$(CONFIG_SND_SOC_RT5682) += snd-soc-rt5682.o obj-$(CONFIG_SND_SOC_RT5682_I2C) += snd-soc-rt5682-i2c.o obj-$(CONFIG_SND_SOC_RT5682_SDW) += snd-soc-rt5682-sdw.o +obj-$(CONFIG_SND_SOC_RT5682S) += snd-soc-rt5682s.o obj-$(CONFIG_SND_SOC_RT700) += snd-soc-rt700.o obj-$(CONFIG_SND_SOC_RT711) += snd-soc-rt711.o obj-$(CONFIG_SND_SOC_RT711_SDCA_SDW) += snd-soc-rt711-sdca.o
sound/soc/codecs/rt5682s.c new file +3188 -0
2,921 lines not on this page · raw message
sound/soc/codecs/rt5682s.h new file +1455 -0
1,455 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.17.1
Part of the diff is not shown here. View the raw message.
PATCH RESEND v2 2/2 ASoC: dt-bindings: rt5682s: add bindings for rt5682s
From: Derek Fang <[email protected]>
Realtek ALC5682I-VS codec is a ALC5682I-VD variant which supports I2C only.
--- .../bindings/sound/realtek,rt5682s.yaml | 100 ++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml new file +100 -0
@@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5682s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek rt5682s codec devicetree bindings + +maintainers: + - Derek Fang <[email protected]> + +description: | + Rt5682s(ALC5682I-VS) is a rt5682i variant which supports I2C only. + +properties: + compatible: + const: realtek,rt5682s + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + description: The CODEC's interrupt output. + + realtek,dmic1-data-pin: + enum: + - 0 # dmic1 data is not used + - 1 # using GPIO2 pin as dmic1 data pin + - 2 # using GPIO5 pin as dmic1 data pin + + realtek,dmic1-clk-pin: + enum: + - 0 # dmic1 clk is not used + - 1 # using GPIO1 pin as dmic1 clock pin + - 2 # using GPIO3 pin as dmic1 clock pin + + realtek,jd-src: + enum: + - 0 # No JD is used + - 1 # using JD1 as JD source + + realtek,ldo1-en-gpios: + description: | + The GPIO that controls the CODEC's LDO1_EN pin. + + realtek,dmic-clk-rate-hz: + description: | + Set the clock rate (hz) for the requirement of the particular DMIC. + + realtek,dmic-delay-ms: + description: | + Set the delay time (ms) for the requirement of the particular DMIC. + + realtek,dmic-clk-driving-high: + type: boolean + description: | + Set the high driving of the DMIC clock out. + + clocks: + items: + - description: phandle and clock specifier for codec MCLK. + + clock-names: + items: + const: mclk + + "#clock-cells": + const: 1 + + clock-output-names: + items: + - description: Name given for DAI word clock output. + - description: Name given for DAI bit clock output. + +additionalProperties: false + +required: + - compatible + - reg + +example: + - | + rt5682s { + compatible = "realtek,rt5682s"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + + #clock-cells = <1>; + clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk"; + + clocks = <&osc>; + clock-names = "mclk"; + };
Signature · 1 line
2.17.1
Re: [PATCH RESEND v2 2/2] ASoC: dt-bindings: rt5682s: add bindings for rt5682s
Quoted 37 lines · On 07/09/2021 14:05, [email protected] wrote:
From: Derek Fang <[email protected]>
Realtek ALC5682I-VS codec is a ALC5682I-VD variant which supports I2C only.
Signed-off-by Derek Fang <[email protected]>--- .../bindings/sound/realtek,rt5682s.yaml | 100 ++++++++++++++++++ 1 file changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5682s.yamlDocumentation/devicetree/bindings/sound/realtek,rt5682s.yaml new file +21
-0@@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5682s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek rt5682s codec devicetree bindings + +maintainers: + - Derek Fang <[email protected]> + +description: | + Rt5682s(ALC5682I-VS) is a rt5682i variant which supports I2C only. + +properties: + compatible: + const: realtek,rt5682s + + reg: + maxItems: 1 + description: I2C address of the device.
Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml line 31
Quoted 10 lines
Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml new file +10
-0+ + interrupts: + description: The CODEC's interrupt output. + + realtek,dmic1-data-pin: + enum: + - 0 # dmic1 data is not used + - 1 # using GPIO2 pin as dmic1 data pin + - 2 # using GPIO5 pin as dmic1 data pin +
+Cc devicetree and Rob,
Guys,
This is really poor. The patch was never sent to devicetree maintainers and does not build at all!
There are several errors here. I fixed few of them:
https://lore.kernel.org/lkml/[email protected]/
but still you need to fix missing description for vendor fields.
Derek,
Your duty is to use get_maintainers.pl script to Cc all relevant maintainers and mailing lists. Second duty is to test it. This was not tested.
Best regards,
Krzysztof
Mark Brown
maintainerQuoted 5 lines · On Tue, 7 Sep 2021 20:05:56 +0800, [email protected] wrote:
From: Derek Fang <[email protected]>
This is an initial codec driver for Realtek ALC5682I-VS codec.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] ASoC: rt5682s: Add driver for ALC5682I-VS codec
commit: bdd229ab26be9aa3306d01787e1467db92df6603
[2/2] ASoC: dt-bindings: rt5682s: add bindings for rt5682s
commit: 50159fdb144b73984873bf2eeb9ff45d10a67f3aAll being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark