Integrity checking fails with Atmel SHA hw accelerator enabled
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi
I'm having some trouble using dm-verity for a squashfs root file system that seems to be related to the Atmel SHA hw accelerator in the kernel, CONFIG_CRYPTO_DEV_ATMEL_SHA
Some info about my setup:
* I'm using a board with a SAMA5D4 CPU.
* I'm using Yocto rocko for building an image for that device.
The idea is that Using the 4.14.14 Kernel, Integrity checking using Kernel crypto fails with Atmel SHA hw accelerator enabled in kernel. By disabling it, CONFIG_CRYPTO_DEV_ATMEL_SHA=n, and using the software sha256 algo, integrity checking works as expected.
This is my kernel config: https://gist.githubusercontent.com/gmircea/6e1cc029ef5ed7a16b0fedb8b9524f66/raw/eece8a8faadd2de9373e150ef1daf3cf25f4135c/.config
Using the 4.8.4 Kernel and Atmel SHA hw accelerator enabled, everything was ok.
So it looks like the new commits, from 4.8.4 to 4.14.14, on atmel-sha.c (or at least I assume that may be a possible source of the problem) changes the behavior and breaks our use case:
This is what triggers the error during verified boot:
status=veritysetup create vroot $root_dev $verity_dev --hash-offset $hashoffset $root_hash
mount /dev/mapper/vroot /mnt/
mount_ok=cat /proc/mounts | grep mnt
if [ -z "$mount_ok" ] ; then
echo "Failed to mount $root_dev on mnt/" else
echo "Switch rootfs"
exec switch_root -c /dev/console /mnt /sbin/init fi
The mount operation fails:
device-mapper: verity: 179:4: metadata block 2 is corrupted EXT4-fs (dm-0): unable to read superblock
device-mapper: verity: 179:4: metadata block 2 is corrupted EXT4-fs (dm-0): unable to read superblock
device-mapper: verity: 179:4: metadata block 2 is corrupted EXT4-fs (dm-0): unable to read superblock
device-mapper: verity: 179:4: metadata block 2 is corrupted SQUASHFS error: squashfs_read_data failed to read block 0x0
squashfs: SQUASHFS error: unable to read squashfs_super_block
device-mapper: verity: 179:4: metadata block 2 is corrupted FAT-fs (dm-0): unable to read boot sector
mount: mounting /dev/mapper/vroot on /mnt/ failed: Input/output error Failed to mount /dev/mmcblk0p4 on mnt/
Smartcom initramfs init failed
reboot: Restarting system
Reboot failed -- System halted
Using veritysetup to verify the integrity against the hashes is successful, as it's not using the kernel for that ...
Any help is appreciated !
Thanks in advanced and have a nice day.
Mircea