ARM: dts: imx: Add WDT bindings on DH i.MX6 DHSOM
PATCH 1/1 ARM: dts: imx: Add WDT bindings on DH i.MX6 DHSOM
Add WDT reboot bindings on DH i.MX6 DHSOM to permit the platform to reboot via WDT in U-Boot. These are custom U-Boot bindings, hence they are placed in -u-boot.dtsi .
---
Cc: Andreas Geisreiter <[email protected]>
Cc: Christoph Niedermaier <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: [email protected]
--- arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi +10 -0
@@ -8,6 +8,12 @@ aliases { eeprom0 = &eeprom0; }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + u-boot,dm-spl; + }; }; &fec {
@@ -25,3 +31,7 @@ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; enable-active-high; }; + +&wdog1 { + u-boot,dm-spl; +};
Signature · 1 line
2.39.2
Quoted 5 lines · Marek Vasut
Add WDT reboot bindings on DH i.MX6 DHSOM to permit the platform to reboot via WDT in U-Boot. These are custom U-Boot bindings, hence they are placed in
-u-boot.dtsi.Signed-off-by Marek Vasut <[email protected]>
Hi Marek,
Quoted 21 lines · Marek Vasut
Add WDT reboot bindings on DH i.MX6 DHSOM to permit the platform to reboot via WDT in U-Boot. These are custom U-Boot bindings, hence they are placed in
-u-boot.dtsi.Signed-off-by Marek Vasut <[email protected]>---
Cc: Andreas Geisreiter <[email protected]>
Cc: Christoph Niedermaier <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: [email protected]--- arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi +0
-0
arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi line 16
Quoted 9 lines
arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi +6
-0@@ -8,6 +8,12 @@ aliases { eeprom0 = &eeprom0; }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + u-boot,dm-spl; + }
I cannot merge it, u-boot,dm-spl is not allowed anymore (see https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/604593), switched to bootph-pre-ram ?
Same is for the other patch of yours:
http://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
Best regards,
Stefano
;
Quoted 11 lines
arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi +4
-0}; &fec {@@ -25,3 +31,7 @@ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; enable-active-high; }; + +&wdog1 { + u-boot,dm-spl; +};
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================