Skip to contentSkip to conversation

io_uring: add io_uring_link trace event

RFC In review Dmitrii Dolgov 2 participants 4 messages Oct 8, 2019

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

RFC 1/1 io_uring: add io_uring_link trace event

To trace io_uring activity one can get an information from workqueue and io trace events, but looks like some parts could be hard to identify. E.g. it's not easy to figure out that one work was started after another due to a link between them.

For that purpose introduce io_uring_link trace event, that will be fired when a request is added to a link_list.

---
 fs/io_uring.c                   |  4 ++++
 include/Kbuild                  |  1 +
 include/trace/events/io_uring.h | 42 +++++++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+)
 create mode 100644 include/trace/events/io_uring.h
fs/io_uring.c +4 -0
index bfbb7ab3c4e..63e4b592d69 100644
@@ -71,6 +71,9 @@
 #include <linux/sizes.h>
 #include <linux/hugetlb.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/io_uring.h>
+
 #include <uapi/linux/io_uring.h>
 
 #include "internal.h"
@@ -2488,6 +2491,7 @@ static void io_submit_sqe(struct io_ring_ctx *ctx, struct sqe_submit *s,
 
 		s->sqe = sqe_copy;
 		memcpy(&req->submit, s, sizeof(*s));
+		trace_io_uring_link(&req->work, &prev->work);
 		list_add_tail(&req->list, &prev->link_list);
 	} else if (s->sqe->flags & IOSQE_IO_LINK) {
 		req->flags |= REQ_F_LINK;
include/Kbuild +1 -0
index ffba79483cc..61b66725d25 100644
@@ -1028,6 +1028,7 @@ header-test-			+= trace/events/fsi_master_gpio.h
 header-test-			+= trace/events/huge_memory.h
 header-test-			+= trace/events/ib_mad.h
 header-test-			+= trace/events/ib_umad.h
+header-test-			+= trace/events/io_uring.h
 header-test-			+= trace/events/iscsi.h
 header-test-			+= trace/events/jbd2.h
 header-test-			+= trace/events/kvm.h
include/trace/events/io_uring.h new file +42 -0

42 lines not on this page · raw message

Signature · 1 line
2.21.0
#1 lore raw
Quoted 101 lines · Dmitrii Dolgov

To trace io_uring activity one can get an information from workqueue and io trace events, but looks like some parts could be hard to identify. E.g. it's not easy to figure out that one work was started after another due to a link between them.

For that purpose introduce io_uring_link trace event, that will be fired when a request is added to a link_list.

---
 fs/io_uring.c                   |  4 ++++
 include/Kbuild                  |  1 +
 include/trace/events/io_uring.h | 42 +++++++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+)
 create mode 100644 include/trace/events/io_uring.h
fs/io_uring.c +4 -0
index bfbb7ab3c4e..63e4b592d69 100644
@@ -71,6 +71,9 @@
 #include <linux/sizes.h>
 #include <linux/hugetlb.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/io_uring.h>
+
 #include <uapi/linux/io_uring.h>
 
 #include "internal.h"
@@ -2488,6 +2491,7 @@ static void io_submit_sqe(struct io_ring_ctx *ctx, struct sqe_submit *s,
 
                s->sqe = sqe_copy;
                memcpy(&req->submit, s, sizeof(*s));
+               trace_io_uring_link(&req->work, &prev->work);
                list_add_tail(&req->list, &prev->link_list);
        } else if (s->sqe->flags & IOSQE_IO_LINK) {
                req->flags |= REQ_F_LINK;
include/Kbuild +1 -0
index ffba79483cc..61b66725d25 100644
@@ -1028,6 +1028,7 @@ header-test-                      += trace/events/fsi_master_gpio.h
 header-test-                   += trace/events/huge_memory.h
 header-test-                   += trace/events/ib_mad.h
 header-test-                   += trace/events/ib_umad.h
+header-test-                   += trace/events/io_uring.h
 header-test-                   += trace/events/iscsi.h
 header-test-                   += trace/events/jbd2.h
 header-test-                   += trace/events/kvm.h
include/trace/events/io_uring.h new file +42 -1
new file mode 100644
index 00000000000..56245c31a1e
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM io_uring
+
+#if !defined(_TRACE_IO_URING_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_IO_URING_H
+
+#include <linux/tracepoint.h>
+
+/**
+ * io_uring_link - called immediately before the io_uring work added into
+ *                                link_list of the another request.
+ * @work:                      pointer to linked struct work_struct
+ * @target_work:       pointer to previous struct work_struct,
+ *                                     that would contain @work
+ *
+ * Allows to track linked requests in io_uring.
+ */
+TRACE_EVENT(io_uring_link,
+
+       TP_PROTO(struct work_struct *work, struct work_struct *target_work),
+
+       TP_ARGS(work, target_work),
+
+       TP_STRUCT__entry (
+               __field(  void *,       work                    )
+               __field(  void *,       target_work             )
+       ),
+
+       TP_fast_assign(
+               __entry->work                   = work;
+               __entry->target_work    = target_work;
+       ),
+
+       TP_printk("io_uring work struct %p linked after %p",
+                         __entry->work, __entry->target_work)
+);
+
+#endif /* _TRACE_IO_URING_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--
Quoted 2 lines

2.21.0

If I'm missing something and it doesn't make sense, then I would be glad to hear if there are any best practices or ideas, and in general how to look at io_uring from the tracing point of view.

maintainer
#2 lore raw
Quoted 99 lines · Dmitry Dolgov
Quoted 99 lines · Dmitrii Dolgov

To trace io_uring activity one can get an information from workqueue and io trace events, but looks like some parts could be hard to identify. E.g. it's not easy to figure out that one work was started after another due to a link between them.

For that purpose introduce io_uring_link trace event, that will be fired when a request is added to a link_list.

---
  fs/io_uring.c                   |  4 ++++
  include/Kbuild                  |  1 +
  include/trace/events/io_uring.h | 42 +++++++++++++++++++++++++++++++++
  3 files changed, 47 insertions(+)

create mode 100644 include/trace/events/io_uring.h

fs/io_uring.c +4 -0
index bfbb7ab3c4e..63e4b592d69 100644
@@ -71,6 +71,9 @@
  #include <linux/sizes.h>
  #include <linux/hugetlb.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/io_uring.h>
+
  #include <uapi/linux/io_uring.h>
 
  #include "internal.h"
@@ -2488,6 +2491,7 @@ static void io_submit_sqe(struct io_ring_ctx *ctx, struct sqe_submit *s,
 
                 s->sqe = sqe_copy;
                 memcpy(&req->submit, s, sizeof(*s));
+               trace_io_uring_link(&req->work, &prev->work);
                 list_add_tail(&req->list, &prev->link_list);
         } else if (s->sqe->flags & IOSQE_IO_LINK) {
                 req->flags |= REQ_F_LINK;
include/Kbuild +1 -0
index ffba79483cc..61b66725d25 100644
@@ -1028,6 +1028,7 @@ header-test-                      += trace/events/fsi_master_gpio.h
  header-test-                   += trace/events/huge_memory.h
  header-test-                   += trace/events/ib_mad.h
  header-test-                   += trace/events/ib_umad.h
+header-test-                   += trace/events/io_uring.h
  header-test-                   += trace/events/iscsi.h
  header-test-                   += trace/events/jbd2.h
  header-test-                   += trace/events/kvm.h
include/trace/events/io_uring.h new file +41 -0
new file mode 100644
index 00000000000..56245c31a1e
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM io_uring
+
+#if !defined(_TRACE_IO_URING_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_IO_URING_H
+
+#include <linux/tracepoint.h>
+
+/**
+ * io_uring_link - called immediately before the io_uring work added into
+ *                                link_list of the another request.
+ * @work:                      pointer to linked struct work_struct
+ * @target_work:       pointer to previous struct work_struct,
+ *                                     that would contain @work
+ *
+ * Allows to track linked requests in io_uring.
+ */
+TRACE_EVENT(io_uring_link,
+
+       TP_PROTO(struct work_struct *work, struct work_struct *target_work),
+
+       TP_ARGS(work, target_work),
+
+       TP_STRUCT__entry (
+               __field(  void *,       work                    )
+               __field(  void *,       target_work             )
+       ),
+
+       TP_fast_assign(
+               __entry->work                   = work;
+               __entry->target_work    = target_work;
+       ),
+
+       TP_printk("io_uring work struct %p linked after %p",
+                         __entry->work, __entry->target_work)
+);
+
+#endif /* _TRACE_IO_URING_H */
+
+/* This part must be outside protection */
Quoted 8 lines
Quoted 4 lines
include/trace/events/io_uring.h new file +1 -1
+#include <trace/define_trace.h>
--

2.21.0

If I'm missing something and it doesn't make sense, then I would be glad to hear if there are any best practices or ideas, and in general how to look at io_uring from the tracing point of view.

I think it makes sense, and in fact I'd encourage you to expand the tracing so we can get better insight into io_uring doing what it should be doing.

Signature · 1 line
Jens Axboe
#3 lore raw
Quoted 9 lines · Jens Axboe
Quoted 4 lines

If I'm missing something and it doesn't make sense, then I would be glad to hear if there are any best practices or ideas, and in general how to look at io_uring from the tracing point of view.

I think it makes sense, and in fact I'd encourage you to expand the tracing so we can get better insight into io_uring doing what it should be doing.

Sure. I was investigating this topic for some time, and hopefully soon I can prepare a patch with more intensive tracing for most important aspects.