trivial: fix assorted "success" typos
Subsystems (55)
PATCH 1/16 trivial: fix assorted "success" typos
Quoted 1 line
From
b81a0ec27dd1c855362c0af105f0e89623bba52aMon Sep 17 00:00:00 2001
From: =?UTF-8?q?Andr=C3=A9=20Goddard=20Rosa?= <[email protected]>
Date: Fri, 30 Oct 2009 03:40:34 -0200
Subject: [PATCH 01/16] trivial: fix assorted "success" typos
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
(quoted diff) +0 -0
b/Documentation/ABI/testing/procfs-diskstats
index 9923390..f91a973 100644
Documentation/ABI/testing/procfs-diskstats +1 -1
@@ -8,7 +8,7 @@ Description: 1 - major number 2 - minor mumber 3 - device name - 4 - reads completed succesfully + 4 - reads completed successfully 5 - reads merged 6 - sectors read 7 - time spent reading (ms)
(quoted diff) +0 -0
b/Documentation/ABI/testing/sysfs-block
index 5f3beda..d2f9033 100644
Documentation/ABI/testing/sysfs-block +1 -1
@@ -4,7 +4,7 @@ Contact: Jerome Marchand <[email protected]> Description: The /sys/block/<disk>/stat files displays the I/O statistics of disk <disk>. They contain 11 fields: - 1 - reads completed succesfully + 1 - reads completed successfully 2 - reads merged 3 - sectors read 4 - time spent reading (ms)
(quoted diff) +0 -0
b/Documentation/scsi/ChangeLog.megaraid_sas
index c851ef4..84524e0 100644
Documentation/scsi/ChangeLog.megaraid_sas +0 -0
@@ -185,7 +185,7 @@ ii. FW enables WCE bit in Mode Sense cmd for
drives that are configured
Disks are exposed with WCE=1. User is advised to enable Write Back mode only when the controller has battery backup. At this time Synhronize cache is not supported by the FW. Driver will short-cycle
- the cmd and return sucess without sending down to FW.
+ the cmd and return success without sending down to FW.
1 Release Date : Sun Jan. 14 11:21:32 PDT 2007 -
Sumant Patro <[email protected]>/Bo Yang
(quoted diff) +0 -0
b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h index 375066a..1e24420 100644
arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +1 -1
@@ -83,7 +83,7 @@ typedef struct {* @brief Get next available transaction width * * -* @return On sucess : Next avail able transaction width +* @return On success : Next avail able transaction width * On failure : dmacHw_TRANSACTION_WIDTH_8 * * @note
(quoted diff) +0 -0
b/arch/arm/mach-bcmring/include/mach/dma.h
index 847980c..1f2c531 100644
arch/arm/mach-bcmring/include/mach/dma.h +0 -0
@@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap, /*
Stores state information about t
/**
* Creates a descriptor ring from a memory mapping.
*
-* @return 0 on sucess, error code otherwise.
+* @return 0 on success, error code otherwise.
*/ /****************************************************************************/
(quoted diff) +0 -0
b/arch/arm/mach-s3c6400/setup-sdhci.c
index b93dafb..1039937 100644
arch/arm/mach-s3c6400/setup-sdhci.c +1 -1
@@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", - /* [3] = "48m", - note not succesfully used yet */ + /* [3] = "48m", - note not successfully used yet */ }; void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
(quoted diff) +0 -0
b/arch/arm/mach-s3c6410/setup-sdhci.c
index 20666f3..816d2d9 100644
arch/arm/mach-s3c6410/setup-sdhci.c +1 -1
@@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = { [0] = "hsmmc", [1] = "hsmmc", [2] = "mmc_bus", -/* [3] = "48m", - note not succesfully used yet */ +/* [3] = "48m", - note not successfully used yet */ };
arch/arm/plat-omap/dma.c +0 -0
@@ -1232,7 +1232,7 @@ static void create_dma_lch_chain(int lch_head,
int lch_queue)
* OMAP_DMA_DYNAMIC_CHAIN
* @params - Channel parameters
*
- * @return - Succes : 0
+ * @return - Success : 0
* Failure: -EINVAL/-ENOMEM
*/
int omap_request_dma_chain(int dev_id, const char *dev_name,
arch/blackfin/kernel/traps.c +1 -1
@@ -619,7 +619,7 @@ asmlinkage notrace void trap_c(struct pt_regs *fp)/* * Similar to get_user, do some address checking, then dereference -* Return true on sucess, false on bad address +* Return true on success, false on bad address */ static bool get_instruction (unsigned short *val,unsigned short *address) {
arch/microblaze/lib/memcpy.c +1 -1
@@ -9,7 +9,7 @@* It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * -* Attempts were made, unsuccesfully, to contact the original +* Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. *
arch/microblaze/lib/memmove.c +1 -1
@@ -9,7 +9,7 @@* It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * -* Attempts were made, unsuccesfully, to contact the original +* Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. *
arch/microblaze/lib/memset.c +1 -1
@@ -9,7 +9,7 @@* It is based on demo code originally Copyright 2001 by Intel Corp, taken from * http://www.embedded.com/showArticle.jhtml?articleID=19205567 * -* Attempts were made, unsuccesfully, to contact the original +* Attempts were made, unsuccessfully, to contact the original * author of this code (Michael Morrow, Intel). Below is the original * copyright notice. *
(quoted diff) +0 -0
b/arch/powerpc/platforms/powermac/pci.c
index e81403b..ab2027c 100644
arch/powerpc/platforms/powermac/pci.c +1 -1
@@ -302,7 +302,7 @@ static void __init setup_chaos(struct pci_controller *hose,* 1 -> Skip the device but act as if the access was successfull * (return 0xff's on reads, eventually, cache config space * accesses in a later version) -* -1 -> Hide the device (unsuccessful acess) +* -1 -> Hide the device (unsuccessful access) */ static int u3_ht_skip_device (struct pci_controller *hose,struct pci_bus *bus,unsigned int devfn)
arch/x86/kernel/amd_iommu.c +1 -1
@@ -1635,7 +1635,7 @@ retry: goto out;/* -* aperture was sucessfully enlarged by 128 MB, try +* aperture was successfully enlarged by 128 MB, try * allocation again */ goto retry;
block/blk-iopoll.c +1 -1
@@ -28,7 +28,7 @@ static DEFINE_PER_CPU(struct list_head, blk_cpu_iopoll);* Description: * Add this blk_iopoll structure to the pending poll list and trigger the * raise of the blk iopoll softirq. The driver must already have gotten a -* succesful return from blk_iopoll_sched_prep() before calling this. +* successful return from blk_iopoll_sched_prep() before calling this. **/ void blk_iopoll_sched (struct blk_iopoll *iop) {
drivers/base/dd.c +1 -1
@@ -188,7 +188,7 @@ EXPORT_SYMBOL_GPL(wait_for_device_probe);* @dev: device to try to bind to the driver * * This function returns -ENODEV if the device is not registered, -* 1 if the device is bound sucessfully and 0 otherwise. +* 1 if the device is bound successfully and 0 otherwise. * * This function must be called with @dev->sem held. When called for a * USB interface, @dev->parent->sem must be held as well.
drivers/crypto/hifn_795x.c +1 -1
@@ -863,7 +863,7 @@ static int hifn_init_pubrng(struct hifn_device *dev) dev->dmareg |=HIFN_DMAIER_PUBDONE ;hifn_write_1 (dev,HIFN_1_DMA_IER , dev->dmareg); -dprintk ("Chip %s: Public key engine has been sucessfully " +dprintk ("Chip %s: Public key engine has been successfully " "initialised.\n" , dev->name); }
drivers/firewire/core-topology.c +1 -1
@@ -183,7 +183,7 @@ static inline struct fw_node *fw_node(struct list_head *l)* This function builds the tree representation of the topology given * by the self IDs from the latest bus reset. During the construction * of the tree, the function checks that the self IDs are valid and -* internally consistent. On succcess this function returns the +* internally consistent. On success this function returns the * fw_node corresponding to the local card otherwise NULL. */ static struct fw_node *build_tree(struct fw_card *card,
drivers/gpu/drm/drm_crtc.c +0 -0
@@ -2328,7 +2328,7 @@ int drm_mode_connector_property_set_ioctl(struct
drm_device *dev,
} else if (connector->funcs->set_property)
ret = connector->funcs->set_property(connector, property, out_resp->value);
- /* store the property value if succesful */
+ /* store the property value if successful */
if (!ret)
drm_connector_property_set_value(connector, property, out_resp->value);
out:
drivers/input/serio/hp_sdc.c +1 -1
@@ -955,7 +955,7 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d)INIT_DELAYED_WORK (&moduleloader_work, request_module_delayed); ret =hp_sdc_init (); -/* after sucessfull initialization give SDC some time to settle +/* after successfull initialization give SDC some time to settle * and then load the hp_sdc_mlc upper layer driver */ if (!ret) schedule_delayed_work(&moduleloader_work,
drivers/isdn/mISDN/tei.c +0 -0
@@ -725,7 +725,7 @@ tei_id_ver_tout_net(struct FsmInst *fi, int event,
void *arg)
if (tm->rcnt == 1) {
if (*debug & DEBUG_L2_TEI)
tm->tei_m.printdebug(fi,
- "check req for tei %d sucessful\n", tm->l2->tei);
+ "check req for tei %d successful\n", tm->l2->tei);
mISDN_FsmChangeState(fi, ST_TEI_NOP);
} else if (tm->rcnt > 1) {
/* duplicate assignment; remove */
(quoted diff) +0 -0
b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 810f07d..52e4ce4 100644
drivers/media/dvb/dvb-core/dvb_frontend.h +1 -1
@@ -160,7 +160,7 @@ struct tuner_state {* search callback possible return status * * DVBFE_ALGO_SEARCH_SUCCESS -* The frontend search algorithm completed and returned succesfully +* The frontend search algorithm completed and returned successfully * * DVBFE_ALGO_SEARCH_ASLEEP * The frontend search algorithm is sleeping
(quoted diff) +0 -0
b/drivers/media/dvb/frontends/cx24113.c
index 075b2b5..e9ee555 100644
drivers/media/dvb/frontends/cx24113.c +1 -1
@@ -589,7 +589,7 @@ struct dvb_frontend *cx24113_attach(struct dvb_frontend *fe,info ("detected CX24113 variant\n" );break ;case REV_CX24113 : -info ("sucessfully detected\n" ); +info ("successfully detected\n" );break ;default :err ("unsupported device id: %x\n" , state->rev);
(quoted diff) +0 -0
b/drivers/media/dvb/frontends/stb0899_drv.c
index a04c782..1570669 100644
drivers/media/dvb/frontends/stb0899_drv.c +0 -0
@@ -1571,7 +1571,7 @@ static enum dvbfe_search stb0899_search(struct
dvb_frontend *fe, struct dvb_fron
* stb0899_track
* periodically check the signal level against a specified
* threshold level and perform derotator centering.
- * called once we have a lock from a succesful search
+ * called once we have a lock from a successful search
* event.
*
* Will be called periodically called to maintain the
drivers/message/i2o/i2o_block.c +0 -0
@@ -940,7 +940,7 @@ static const struct block_device_operations
i2o_block_fops = {
* Allocate memory for the i2o_block_device struct, gendisk and request
* queue and initialize them as far as no additional information is needed.
*
- * Returns a pointer to the allocated I2O Block device on succes or a
+ * Returns a pointer to the allocated I2O Block device on success or a
* negative error code on failure.
*/
static struct i2o_block_device *i2o_block_device_alloc(void)
drivers/message/i2o/iop.c +1 -1
@@ -132,7 +132,7 @@ u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr)* Removes a previously added pointer from the context list and returns * the matching context id. * -* Returns context id on succes or 0 on failure. +* Returns context id on success or 0 on failure. */ u32 i2o_cntxt_list_remove (struct i2o_controller * c,void *ptr) {
@@ -198,7 +198,7 @@ void *i2o_cntxt_list_get(struct i2o_controller *c,
u32 context)
* @c: controller to which the context list belong
* @ptr: pointer to which the context id should be fetched
*
- * Returns context id which matches to the pointer on succes or 0 on
+ * Returns context id which matches to the pointer on success or 0 on
* failure.
*/
u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr)
drivers/mtd/nand/diskonchip.c +1 -1
@@ -1056,7 +1056,7 @@ static struct nand_ecclayout doc200x_oobinfo = { };/* Find the (I)NFTL Media Header, and optionally also the mirror media header. -On sucessful return, buf will contain a copy of the media header for +On successful return, buf will contain a copy of the media header for further processing. id is the string to scan for, and will presumably be either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media header. The page #s of the found media headers are placed in mh0_page and
drivers/mtd/nand/s3c2410.c +0 -0
@@ -875,7 +875,7 @@ static void s3c2410_nand_init_chip(struct
s3c2410_nand_info *info,
* @info: The controller instance.
* @nmtd: The driver version of the MTD instance.
*
- * This routine is called after the chip probe has succesfully completed
+ * This routine is called after the chip probe has successfully completed
* and the relevant per-chip information updated. This call ensure that
* we update the internal state accordingly.
*
drivers/net/benet/be_main.c +1 -1
@@ -1876,7 +1876,7 @@ int be_load_fw(struct be_adapter *adapter, u8 *func) goto fw_exit; } -dev_info (&adapter->pdev->dev,"Firmware flashed succesfully\n" ); +dev_info (&adapter->pdev->dev,"Firmware flashed successfully\n" ); fw_exit:release_firmware (fw);
drivers/net/e1000e/82571.c +0 -0
@@ -1412,7 +1412,7 @@ static s32
e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
case e1000_serdes_link_autoneg_progress:
/*
* If the LU bit is set in the STATUS register,
- * autoneg has completed sucessfully. If not,
+ * autoneg has completed successfully. If not,
* try foring the link because the far end may be
* available but not capable of autonegotiation. */
drivers/net/e1000e/lib.c +1 -1
@@ -571,7 +571,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)if (!(rxcw &E1000_RXCW_IV )) { mac->serdes_has_link = true;hw_dbg (hw,"SERDES: Link up - autoneg " -"completed sucessfully.\n" ); +"completed successfully.\n" ); }else { mac->serdes_has_link = false; hw_dbg(hw, "SERDES: Link down - invalid"
drivers/net/ehea/ehea_ethtool.c +2 -2
@@ -118,7 +118,7 @@ doit: ret =ehea_set_portspeed (port, sp);if (!ret) -ehea_info ("%s: Port speed succesfully set: %dMbps " +ehea_info ("%s: Port speed successfully set: %dMbps " "%s Duplex" , port->netdev->name, port->port_speed, port->full_duplex ==1 ?"Full" :"Half" );
@@ -134,7 +134,7 @@ static int ehea_nway_reset(struct net_device *dev) ret =ehea_set_portspeed (port,EHEA_SPEED_AUTONEG );if (!ret) -ehea_info ("%s: Port speed succesfully set: %dMbps " +ehea_info ("%s: Port speed successfully set: %dMbps " "%s Duplex" , port->netdev->name, port->port_speed, port->full_duplex ==1 ?"Full" :"Half" );
drivers/net/mlx4/mlx4_en.h +1 -1
@@ -162,7 +162,7 @@ enum {#define MLX4_EN_DEF_RX_PAUSE 1#define MLX4_EN_DEF_TX_PAUSE 1 -/* Interval between sucessive polls in the Tx routine when polling is used +/* Interval between successive polls in the Tx routine when polling is used instead of interrupts (in per-core Tx rings) - should be power of 2 */ #define MLX4_EN_TX_POLL_MODER 16#define MLX4_EN_TX_POLL_TIMEOUT (HZ / 4)
drivers/net/ps3_gelic_net.c +1 -1
@@ -296,7 +296,7 @@ static void gelic_card_reset_chain(struct gelic_card *card,* @card: card structure * @descr: descriptor to re-init * -* return 0 on succes, <0 on failure +* return 0 on success, <0 on failure * * allocates a new rx skb, iommu-maps it and attaches it to the descriptor. * Activate the descriptor state-wise
drivers/net/sfc/falcon.c +1 -1
@@ -1264,7 +1264,7 @@ int falcon_flush_queues(struct efx_nic *efx)msleep (FALCON_FLUSH_INTERVAL );falcon_poll_flush_events (efx); -/* Check if every queue has been succesfully flushed */ +/* Check if every queue has been successfully flushed */ outstanding = false;efx_for_each_tx_queue (tx_queue, efx) outstanding |= !tx_queue->flushed;
drivers/net/smsc911x.c +1 -1
@@ -816,7 +816,7 @@ static int smsc911x_mii_probe(struct net_device *dev)SMSC_TRACE (HW ,"Passed Loop Back Test" );#endif /* USE_PHY_WORK_AROUND */ -SMSC_TRACE (HW ,"phy initialised succesfully" ); +SMSC_TRACE (HW ,"phy initialised successfully" );return 0 ; }
drivers/net/smsc911x.h +1 -1
@@ -30,7 +30,7 @@#define SMSC_NAPI_WEIGHT 16/* implements a PHY loopback test at initialisation time, to ensure a packet -* can be succesfully looped back */ +* can be successfully looped back */ #define USE_PHY_WORK_AROUND #define DPRINTK(nlevel, klevel, fmt, args...) \
drivers/net/spider_net.c +0 -0
@@ -409,7 +409,7 @@ spider_net_free_rx_chain_contents(struct
spider_net_card *card)
* @card: card structure
* @descr: descriptor to re-init
*
- * Return 0 on succes, <0 on failure.
+ * Return 0 on success, <0 on failure.
*
* Allocates a new rx skb, iommu-maps it and attaches it to the
* descriptor. Mark the descriptor as activated, ready-to-use.
drivers/net/ucc_geth.h +10 -10
@@ -80,16 +80,16 @@ struct ucc_geth {frames) received that were between 128 (Including FCS length==4) and 255 octets */ u32 txok;/* Total number of octets residing in frames -that where involved in succesfull +that where involved in successfull transmission */ u16 txcf;/* Total number of PAUSE control frames transmitted by this MAC */ u8 res4[0x2 ];u32 tmca;/* Total number of frames that were transmitted -succesfully with the group address bit set +successfully with the group address bit set that are not broadcast frames */ u32 tbca;/* Total number of frames transmitted -succesfully that had destination address +successfully that had destination address field equal to the broadcast address */ u32 rxfok;/* Total number of frames received OK */ u32 rxbok;/* Total number of octets received OK */
@@ -98,9 +98,9 @@ struct ucc_geth {HW because it includes octets in frames that never even reach the UCC */ u32 rmca;/* Total number of frames that were received -succesfully with the group address bit set +successfully with the group address bit set that are not broadcast frames */ -u32 rbca;/* Total number of frames received succesfully +u32 rbca;/* Total number of frames received successfully that had destination address equal to the broadcast address */ u32 scar;/* Statistics carry register */
@@ -759,15 +759,15 @@ struct ucc_geth_hardware_statistics {frames) received that were between 128 (Including FCS length==4) and 255 octets */ u32 txok;/* Total number of octets residing in frames -that where involved in succesfull +that where involved in successfull transmission */ u16 txcf;/* Total number of PAUSE control frames transmitted by this MAC */ u32 tmca;/* Total number of frames that were transmitted -succesfully with the group address bit set +successfully with the group address bit set that are not broadcast frames */ u32 tbca;/* Total number of frames transmitted -succesfully that had destination address +successfully that had destination address field equal to the broadcast address */ u32 rxfok;/* Total number of frames received OK */ u32 rxbok;/* Total number of octets received OK */
@@ -776,9 +776,9 @@ struct ucc_geth_hardware_statistics {HW because it includes octets in frames that never even reach the UCC */ u32 rmca;/* Total number of frames that were received -succesfully with the group address bit set +successfully with the group address bit set that are not broadcast frames */ -u32 rbca;/* Total number of frames received succesfully +u32 rbca;/* Total number of frames received successfully that had destination address equal to the broadcast address */ } __attribute__ ((packed));
drivers/net/usb/smsc95xx.c +1 -1
@@ -748,7 +748,7 @@ static int smsc95xx_phy_initialize(struct usbnet *dev)mii_nway_restart (&dev->mii);if (netif_msg_ifup (dev)) -devdbg (dev,"phy initialised succesfully" ); +devdbg (dev,"phy initialised successfully" );return 0 ; }
drivers/net/wimax/i2400m/rx.c +1 -1
@@ -1114,7 +1114,7 @@ error:* device. See the file header for the format. Run all checks on the * buffer header, then run over each payload's descriptors, verify * their consistency and act on each payload's contents. If -* everything is succesful, update the device's statistics. +* everything is successful, update the device's statistics. * * Note: You need to set the skb to contain only the length of the * received buffer; for that, use skb_trim(skb, RECEIVED_SIZE).
(quoted diff) +0 -0
b/drivers/net/wireless/ath/ath9k/rc.c
index 16a2717..2d3b4e7 100644
drivers/net/wireless/ath/ath9k/rc.c +1 -1
@@ -969,7 +969,7 @@ static bool ath_rc_update_per(struct ath_softc *sc,* Since this probe succeeded, we allow the next * probe twice as soon. This allows the maxRate * to move up faster if the probes are -* succesful. +* successful. */ ath_rc_priv->probe_time = now_msec - rate_table->probe_interval /2 ;
(quoted diff) +0 -0
b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 5015448..422288b 100644
drivers/net/wireless/rt2x00/rt2x00usb.c +1 -1
@@ -193,7 +193,7 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)* Obtain the status about this packet. * Note that when the status is 0 it does not mean the * frame was send out correctly. It only means the frame -* was succesfully pushed to the hardware, we have no +* was successfully pushed to the hardware, we have no * way to determine the transmission status right now. * (Only indirectly by looking at the failed TX counters * in the register).
(quoted diff) +0 -0
b/drivers/net/wireless/zd1211rw/zd_mac.c
index 6d66635..2b7f965 100644
drivers/net/wireless/zd1211rw/zd_mac.c +0 -0
@@ -312,7 +312,7 @@ static void tx_status(struct ieee80211_hw *hw,
struct sk_buff *skb,
* zd_mac_tx_failed - callback for failed frames
* @dev: the mac80211 wireless device
*
- * This function is called if a frame couldn't be succesfully be
+ * This function is called if a frame couldn't be successfully be
* transferred. The first frame from the tx queue, will be selected and
* reported as error to the upper layers.
*/
drivers/s390/char/fs3270.c +0 -0
@@ -74,7 +74,7 @@ fs3270_do_io(struct raw3270_view *view, struct
raw3270_request *rq)
}
rc = raw3270_start(view, rq);
if (rc == 0) {
- /* Started sucessfully. Now wait for completion. */
+ /* Started successfully. Now wait for completion. */
wait_event(fp->wait, raw3270_request_final(rq));
}
} while (rc == -EACCES);
drivers/s390/cio/chp.c +0 -0
@@ -65,7 +65,7 @@ static void set_chp_logically_online(struct chp_id
chpid, int onoff)
chpid_to_chp(chpid)->state = onoff;
}
-/* On succes return 0 if channel-path is varied offline, 1 if it is varied +/* On success return 0 if channel-path is varied offline, 1 if it is varied
* online. Return -ENODEV if channel-path is not registered. */
int chp_get_status(struct chp_id chpid)
{
drivers/scsi/aic7xxx/aic79xx.seq +1 -1
@@ -217,7 +217,7 @@ BEGIN_CRITICAL; scbdma_tohost_done: test CCSCBCTL, CCARREN jz fill_qoutfifo_dmadone; /* - * An SCB has been succesfully uploaded to the host. + * An SCB has been successfully uploaded to the host. * If the SCB was uploaded for some reason other than * bad SCSI status (currently only for underruns), we * queue the SCB for normal completion. Otherwise, we
(quoted diff) +0 -0
b/drivers/scsi/aic7xxx/aic79xx_core.c
index 63b521d..4d419c1 100644
drivers/scsi/aic7xxx/aic79xx_core.c +1 -1
@@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)/* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy -* LED does. SELINGO is only cleared by a sucessfull +* LED does. SELINGO is only cleared by a successfull * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus).
(quoted diff) +0 -0
b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 8dfb59d..45aa728 100644
drivers/scsi/aic7xxx/aic7xxx_core.c +1 -1
@@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)/* * Although the driver does not care about the * 'Selection in Progress' status bit, the busy -* LED does. SELINGO is only cleared by a sucessfull +* LED does. SELINGO is only cleared by a successfull * selection, so we must manually clear it to insure * the LED turns off just incase no future successful * selections occur (e.g. no devices on the bus).
drivers/scsi/libfc/fc_lport.c +1 -1
@@ -56,7 +56,7 @@* at the same time. * * When discovery succeeds or fails a callback is made to the lport as -* notification. Currently, succesful discovery causes the lport to take no +* notification. Currently, successful discovery causes the lport to take no * action. A failure will cause the lport to reset. There is likely a circular * locking problem with this implementation. */
drivers/scsi/libiscsi_tcp.c +0 -0
@@ -1004,7 +1004,7 @@ static struct iscsi_r2t_info
*iscsi_tcp_get_curr_r2t(struct iscsi_task *task)
* iscsi_tcp_task_xmit - xmit normal PDU task
* @task: iscsi command task
*
- * We're expected to return 0 when everything was transmitted succesfully,
+ * We're expected to return 0 when everything was transmitted successfully,
* -EAGAIN if there's still data in the queue, or != 0 for any other kind
* of error.
*/
drivers/scsi/lpfc/lpfc_attr.c +1 -1
@@ -654,7 +654,7 @@ lpfc_selective_reset(struct lpfc_hba *phba)* Notes: * Assumes any error from lpfc_selective_reset() will be negative. * If lpfc_selective_reset() returns zero then the length of the buffer -* is returned which indicates succcess +* is returned which indicates success * * Returns: * -EINVAL if the buffer does not contain the string "selective"
@@ -3147,7 +3147,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct
bin_attribute *bin_attr,
* sysfs_ctlreg_read - Read method for reading from ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
- * @buf: if succesful contains the data from the adapter IOREG space.
+ * @buf: if successful contains the data from the adapter IOREG space.
* @off: offset into buffer to beginning of data.
* @count: bytes to transfer.
*
drivers/scsi/lpfc/lpfc_els.c +0 -0
@@ -802,7 +802,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct
lpfc_iocbq *cmdiocb,
/* FLOGI completes successfully */ lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
- "0101 FLOGI completes sucessfully "
+ "0101 FLOGI completes successfully "
"Data: x%x x%x x%x x%x\n", irsp->un.ulpWord[4], sp->cmn.e_d_tov, sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution);
@@ -4134,7 +4134,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
/* Indicate we are walking fc_rscn_id_list on this vport */ vport->fc_rscn_flush = 1; spin_unlock_irq(shost->host_lock);
- /* Get the array count after sucessfully have the token */
+ /* Get the array count after successfully have the token */
rscn_cnt = vport->fc_rscn_id_cnt;
/* If we are already processing an RSCN, save the received
* RSCN payload buffer, cmdiocb->context2 to process later.
drivers/scsi/lpfc/lpfc_init.c +4 -4
@@ -645,7 +645,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)* down the SLI Layer. * * Return codes -* 0 - sucess. +* 0 - success. * Any other value - error. **/ static int
@@ -700,7 +700,7 @@ lpfc_hba_down_post_s3(struct lpfc_hba *phba)* down the SLI Layer. * * Return codes -* 0 - sucess. +* 0 - success. * Any other value - error. **/ static int
@@ -755,7 +755,7 @@ lpfc_hba_down_post_s4(struct lpfc_hba *phba)* uninitialization after the HBA is reset when bring down the SLI Layer. * * Return codes -* 0 - sucess. +* 0 - success. * Any other value - error. **/ int
@@ -1254,7 +1254,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)* routine from the API jump table function pointer from the lpfc_hba struct. * * Return codes -* 0 - sucess. +* 0 - success. * Any other value - error. **/ void
@@ -3124,7 +3124,7 @@ static void lpfc_log_intr_mode(struct lpfc_hba
*phba, uint32_t intr_mode)
* PCI devices.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3220,7 +3220,7 @@ lpfc_reset_hba(struct lpfc_hba *phba)
* support the SLI-3 HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3321,7 +3321,7 @@ lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
* support the SLI-4 HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3642,7 +3642,7 @@ lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
* device specific resource setup to support the HBA device it attached to. *
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3688,7 +3688,7 @@ lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
* device specific resource setup to support the HBA device it attached to. *
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3753,7 +3753,7 @@ lpfc_free_iocb_list(struct lpfc_hba *phba)
* list and set up the IOCB tag array accordingly.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3872,7 +3872,7 @@ lpfc_free_active_sgl(struct lpfc_hba *phba)
* list and set up the sgl xritag tag array accordingly.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3986,7 +3986,7 @@ out_free_mem:
* enabled and the driver is reinitializing the device.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -4146,7 +4146,7 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
* PCI device data structure is set.
*
* Return codes
- * pointer to @phba - sucessful + * pointer to @phba - successful * NULL - error
**/
static struct lpfc_hba *
@@ -4202,7 +4202,7 @@ lpfc_hba_free(struct lpfc_hba *phba)
* host with it.
*
* Return codes
- * 0 - sucessful + * 0 - successful * other values - error
**/
static int
@@ -4365,7 +4365,7 @@ lpfc_post_init_setup(struct lpfc_hba *phba)
* with SLI-3 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -4662,7 +4662,7 @@ lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
* this routine.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - could not allocated memory.
**/
static int
@@ -4761,7 +4761,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
* allocation for the port.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -4861,7 +4861,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
* HBA consistent with the SLI-4 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -4910,7 +4910,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba)
* we just use some constant number as place holder.
*
* Return codes
- * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully.
**/
@@ -5218,7 +5218,7 @@ out_error:
* operation.
*
* Return codes
- * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully.
**/
@@ -5286,7 +5286,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
* operation.
*
* Return codes
- * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully.
**/
@@ -5552,7 +5552,7 @@ out_error:
* operation.
*
* Return codes
- * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully.
**/
@@ -5599,7 +5599,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba)
* Later, this can be used for all the slow-path events. *
* Return codes
- * 0 - sucessful + * 0 - successful * -ENOMEM - No availble memory
**/
static int
@@ -5760,7 +5760,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
* all resources assigned to the PCI function which originates this request. *
* Return codes
- * 0 - sucessful + * 0 - successful * ENOMEM - No availble memory * EIO - The mailbox failed to complete successfully.
**/
@@ -5923,7 +5923,7 @@ lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
* with SLI-4 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6052,7 +6052,7 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
* will be left with MSI-X enabled and leaks its vectors.
*
* Return codes
- * 0 - sucessful + * 0 - successful * other values - error
**/
static int
@@ -6184,7 +6184,7 @@ lpfc_sli_disable_msix(struct lpfc_hba *phba)
* is done in this function.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
*/
static int
@@ -6243,7 +6243,7 @@ lpfc_sli_disable_msi(struct lpfc_hba *phba)
* MSI-X -> MSI -> IRQ.
*
* Return codes
- * 0 - sucessful + * 0 - successful * other values - error
**/
static uint32_t
@@ -6333,7 +6333,7 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba)
* enabled and leaks its vectors.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6443,7 +6443,7 @@ lpfc_sli4_disable_msix(struct lpfc_hba *phba)
* which is done in this function.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6508,7 +6508,7 @@ lpfc_sli4_disable_msi(struct lpfc_hba *phba)
* MSI-X -> MSI -> IRQ.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static uint32_t
drivers/scsi/lpfc/lpfc_sli.c +3 -3
@@ -4163,7 +4163,7 @@ lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,* addition, this routine gets the port vpd data. * * Return codes -* 0 - sucessful +* 0 - successful * ENOMEM - could not allocated memory. **/ static int
@@ -11091,7 +11091,7 @@ lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba)* sequential. * * Return codes -* 0 - sucessful +* 0 - successful * EIO - The mailbox failed to complete successfully. * When this error occurs, the driver is not guaranteed * to have any rpi regions posted to the device and
@@ -11129,7 +11129,7 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba)* maps up to 64 rpi context regions. * * Return codes -* 0 - sucessful +* 0 - successful * ENOMEM - No available memory * EIO - The mailbox failed to complete successfully. **/
@@ -11191,7 +11191,7 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba,
struct lpfc_rpi_hdr *rpi_page)
* PAGE_SIZE modulo 64 rpi context headers.
*
* Returns
- * A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful
+ * A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful
* LPFC_RPI_ALLOC_ERROR if no rpis are available.
**/
int
(quoted diff) +0 -0
b/drivers/scsi/megaraid/megaraid_mbox.c
index 234f0b7..f9ae803 100644
drivers/scsi/megaraid/megaraid_mbox.c +1 -1
@@ -2704,7 +2704,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp) }else {con_log (CL_ANN , (KERN_NOTICE -"megaraid mbox: reset sequence completed sucessfully\n" )); +"megaraid mbox: reset sequence completed successfully\n" )); }
(quoted diff) +0 -0
b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 86ab32d..756e509 100644
drivers/scsi/mpt2sas/mpt2sas_scsih.c +0 -0
@@ -2894,7 +2894,7 @@ _scsih_normalize_sense(char *sense_buffer,
struct sense_info *data)
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
- * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
+ * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request
* @ioc: per adapter object
* @scmd: pointer to scsi command object
* @mpi_reply: reply mf payload returned from firmware
drivers/scsi/pmcraid.c +0 -0
@@ -3342,7 +3342,7 @@ static int pmcraid_chr_fasync(int fd, struct
file *filep, int mode)
* @direction : data transfer direction
*
* Return value
- * 0 on sucess, non-zero error code on failure
+ * 0 on success, non-zero error code on failure
*/
static int pmcraid_build_passthrough_ioadls(
struct pmcraid_cmd *cmd,
@@ -3401,7 +3401,7 @@ static int pmcraid_build_passthrough_ioadls(
* @direction: data transfer direction
*
* Return value
- * 0 on sucess, non-zero error code on failure
+ * 0 on success, non-zero error code on failure
*/
static void pmcraid_release_passthrough_ioadls(
struct pmcraid_cmd *cmd,
@@ -3429,7 +3429,7 @@ static void pmcraid_release_passthrough_ioadls(
* @arg: pointer to pmcraid_passthrough_buffer user buffer *
* Return value
- * 0 on sucess, non-zero error code on failure
+ * 0 on success, non-zero error code on failure
*/
static long pmcraid_ioctl_passthrough(
struct pmcraid_instance *pinstance,
drivers/scsi/scsi_netlink.c +1 -1
@@ -613,7 +613,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_send_transport_msg);* @data_buf: pointer to vendor unique data buffer * * Returns: -* 0 on succesful return +* 0 on successful return * otherwise, failing error code * * Notes:
(quoted diff) +0 -0
b/drivers/scsi/scsi_transport_sas.c
index fd47cb1..f27e52d 100644
drivers/scsi/scsi_transport_sas.c +3 -3
@@ -666,7 +666,7 @@ EXPORT_SYMBOL(sas_phy_add);* * Note: * This function must only be called on a PHY that has not -* sucessfully been added using sas_phy_add(). +* successfully been added using sas_phy_add(). */ void sas_phy_free (struct sas_phy *phy) {
@@ -896,7 +896,7 @@ EXPORT_SYMBOL(sas_port_add);* * Note: * This function must only be called on a PORT that has not -* sucessfully been added using sas_port_add(). +* successfully been added using sas_port_add(). */ void sas_port_free (struct sas_port *port) {
@@ -1476,7 +1476,7 @@ EXPORT_SYMBOL(sas_rphy_add);* * Note: * This function must only be called on a remote -* PHY that has not sucessfully been added using +* PHY that has not successfully been added using * sas_rphy_add() (or has been sas_rphy_remove()'d) */ void sas_rphy_free (struct sas_rphy *rphy)
(quoted diff) +0 -0
b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 45374d6..2b38f6a 100644
drivers/scsi/sym53c8xx_2/sym_glue.c +0 -0
@@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct
pci_dev *pdev)
*
* This routine is similar to sym_set_workarounds(), except
* that, at this point, we already know that the device was
- * succesfully intialized at least once before, and so most
+ * successfully intialized at least once before, and so most
* of the steps taken there are un-needed here.
*/
static void sym2_reset_workarounds(struct pci_dev *pdev)
drivers/serial/ucc_uart.c +1 -1
@@ -313,7 +313,7 @@ static void qe_uart_stop_tx(struct uart_port *port)* This function will attempt to stuff of all the characters from the * kernel's transmit buffer into TX BDs. * -* A return value of non-zero indicates that it sucessfully stuffed all +* A return value of non-zero indicates that it successfully stuffed all * characters from the kernel buffer. * * A return value of zero indicates that there are still characters in the
(quoted diff) +0 -0
b/drivers/staging/altpciechdma/altpciechdma.c
index e0c5ba4..2f07dd4 100644
drivers/staging/altpciechdma/altpciechdma.c +1 -1
@@ -212,7 +212,7 @@ struct ape_dev {int msi_enabled;/* whether this driver could obtain the regions */ int got_regions; -/* irq line succesfully requested by this driver, -1 otherwise */ +/* irq line successfully requested by this driver, -1 otherwise */ int irq_line;/* board revision */ u8 revision;
@@ -336,7 +336,7 @@ static int __devinit map_bars(struct ape_dev *ape,
struct pci_dev *dev)
printk(KERN_DEBUG "BAR[%d] mapped at 0x%p with length %lu(/%lu).\n", i, ape->bar[i], bar_min_len[i], bar_length);
}
- /* succesfully mapped all required BAR regions */
+ /* successfully mapped all required BAR regions */
rc = 0;
goto success;
fail:
@@ -911,7 +911,7 @@ static int __devinit probe(struct pci_dev *dev,
const struct pci_device_id *id)
/* perform DMA engines loop back test */
rc = dma_test(ape, dev);
(void)rc;
- /* succesfully took the device */
+ /* successfully took the device */
rc = 0;
printk(KERN_DEBUG "probe() successful.\n");
goto end;
(quoted diff) +0 -0
b/drivers/staging/comedi/drivers/me4000.c
index 6079913..8b9fa0f 100644
drivers/staging/comedi/drivers/me4000.c +1 -1
@@ -840,7 +840,7 @@ static int xilinx_download(struct comedi_device *dev)"comedi%d: me4000: xilinx_download(): DONE flag is not set\n" , dev->minor);printk (KERN_ERR -"comedi%d: me4000: xilinx_download(): Download not succesful\n" , +"comedi%d: me4000: xilinx_download(): Download not successful\n" , dev->minor);return -EIO ; }
drivers/staging/dst/export.c +1 -1
@@ -202,7 +202,7 @@ err_out_exit:* so to play good with all cases we just queue BIO into the queue * and wake up processing thread, which gets completed request and * send (encrypting if needed) it back to the client (if it was a read -* request), or sends back reply that writing succesfully completed. +* request), or sends back reply that writing successfully completed. */ static int dst_export_process_request_queue (struct dst_state *st) {
drivers/staging/hv/hv_api.h +2 -2
@@ -316,13 +316,13 @@/* * HV_STATUS_VMX_INSTRUCTION_FAILED -* The requested VMX instruction failed to complete succesfully. +* The requested VMX instruction failed to complete successfully. */ #define HV_STATUS_VMX_INSTRUCTION_FAILED ((u16)0x1011)/* * HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS -* The requested VMX instruction failed to complete succesfully indicating +* The requested VMX instruction failed to complete successfully indicating * status. */ #define HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS ((u16)0x1012)
(quoted diff) +0 -0
b/drivers/staging/octeon/cvmx-pow.h
index c5d66f2..bf9e069 100644
drivers/staging/octeon/cvmx-pow.h +0 -0
@@ -1959,7 +1959,7 @@ static inline uint32_t
cvmx_pow_tag_get_hw_bits(uint64_t tag)
* @buffer_size:
* The size of the supplied buffer
*
- * Returns Zero on sucess, negative on failure
+ * Returns Zero on success, negative on failure */
extern int cvmx_pow_capture(void *buffer, int buffer_size);
(quoted diff) +0 -0
b/drivers/staging/quatech_usb2/quatech_usb2.c
index 2acef94..81877e7 100644
drivers/staging/quatech_usb2/quatech_usb2.c +1 -1
@@ -1670,7 +1670,7 @@ __func__);dbg ("%s(): failed resubmitting read urb, error %d" , __func__, result); }else { -dbg ("%s() sucessfully resumitted read urb" , __func__); +dbg ("%s() successfully resumitted read urb" , __func__);if (tty_st && RxCount) {/* if some inbound data was processed, then * we need to push that through the tty layer
drivers/staging/rar/rar_driver.c +1 -1
@@ -66,7 +66,7 @@ static int __init rar_init_handler(void); static void __exit rar_exit_handler(void);/* -function that is activated on the succesfull probe of the RAR device +function that is activated on the successfull probe of the RAR device */ static int __devinit rar_probe(struct pci_dev *pdev, const struct
pci_device_id *ent);
@@ -319,7 +319,7 @@ static int memrar_init_rar_params(struct pci_dev *pdev)
}
/*
- function that is activaed on the succesfull probe of the RAR device
+ function that is activaed on the successfull probe of the RAR device */
static int __devinit rar_probe(struct pci_dev *pdev, const structpci_device_id *ent)
{
(quoted diff) +0 -0
b/drivers/staging/rt2860/common/rtmp_init.c
index 20c2ce2..0e10e23 100644
drivers/staging/rt2860/common/rtmp_init.c +1 -1
@@ -2691,7 +2691,7 @@ VOID NICUpdateFifoStaCounters( pEntry->FIFOCount =0 ; pEntry->OneSecTxNoRetryOkCount++; -// update NoDataIdleCount when sucessful send packet to STA. +// update NoDataIdleCount when successful send packet to STA. pEntry->NoDataIdleCount =0 ; pEntry->ContinueTxFailCnt =0 ; }
(quoted diff) +0 -0
b/drivers/staging/rt2860/sta/connect.c
index 7bc75ab..0dae822 100644
drivers/staging/rt2860/sta/connect.c +0 -0
@@ -58,8 +58,8 @@ UCHAR CipherSuiteWpaNoneAes[] = { }; UCHAR CipherSuiteWpaNoneAesLen = (sizeof(CipherSuiteWpaNoneAes) /
sizeof(UCHAR));
-// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS,
-// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS +// The following MACRO is called after 1. starting an new IBSS, 2. successfully JOIN an IBSS,
+// or 3. successfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
// All settings successfuly negotiated furing MLME state machines
become final settings
// and are copied to pAd->StaActive
#define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)
\(quoted diff) +0 -0
b/drivers/staging/rt2860/sta/rtmp_data.c
index f751ab6..6df1fe2 100644
drivers/staging/rt2860/sta/rtmp_data.c +1 -1
@@ -898,7 +898,7 @@ Arguments: pPacket Pointer to send packet Return Value: - NDIS_STATUS_SUCCESS If succes to queue the packet into TxSwQueue. + NDIS_STATUS_SUCCESS If success to queue the packet into TxSwQueue. NDIS_STATUS_FAILURE If failed to do en-queue. Note:
drivers/staging/rt2860/sta/wpa.c +2 -2
@@ -276,7 +276,7 @@ VOID WpaEAPOLKeyAction(DBGPRINT (RT_DEBUG_TRACE , ("Receive EAPOL Key Group Message 1\n" )); } -// We will assume link is up (assoc suceess and port not secured). +// We will assume link is up (assoc success and port not secured). // All state has to be able to process message from previous state switch (pAd->StaCfg.WpaState) {
@@ -366,7 +366,7 @@ VOID WpaEAPOLKeyAction(DBGPRINT (RT_DEBUG_TRACE , ("Receive EAPOL Key Group Message 1\n" )); } -// We will assume link is up (assoc suceess and port not secured). +// We will assume link is up (assoc success and port not secured). // All state has to be able to process message from previous state switch (pAd->StaCfg.WpaState) {
(quoted diff) +0 -0
b/drivers/staging/rt3090/common/rtmp_init.c
index 48b95b7..04b54fc 100644
drivers/staging/rt3090/common/rtmp_init.c +1 -1
@@ -2111,7 +2111,7 @@ VOID NICUpdateFifoStaCounters(#endif // DOT11_N_SUPPORT // pEntry->FIFOCount =0 ; pEntry->OneSecTxNoRetryOkCount++; -// update NoDataIdleCount when sucessful send packet to STA. +// update NoDataIdleCount when successful send packet to STA. pEntry->NoDataIdleCount =0 ; pEntry->ContinueTxFailCnt =0 ;#ifdef WDS_SUPPORT
(quoted diff) +0 -0
b/drivers/staging/rt3090/sta/connect.c
index 4aa35ee..583d6ee 100644
drivers/staging/rt3090/sta/connect.c +0 -0
@@ -60,8 +60,8 @@ UCHAR CipherSuiteWpaNoneAes[] = { }; UCHAR CipherSuiteWpaNoneAesLen = (sizeof(CipherSuiteWpaNoneAes) /
sizeof(UCHAR));
-// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS,
-// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS +// The following MACRO is called after 1. starting an new IBSS, 2. successfully JOIN an IBSS,
+// or 3. successfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
// All settings successfuly negotiated furing MLME state machines
become final settings
// and are copied to pAd->StaActive
#define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)
\(quoted diff) +0 -0
b/drivers/staging/rt3090/sta/rtmp_data.c
index 5591364..c1b83be 100644
drivers/staging/rt3090/sta/rtmp_data.c +1 -1
@@ -981,7 +981,7 @@ Arguments: pPacket Pointer to send packet Return Value: - NDIS_STATUS_SUCCESS If succes to queue the packet into TxSwQueue. + NDIS_STATUS_SUCCESS If success to queue the packet into TxSwQueue. NDIS_STATUS_FAILURE If failed to do en-queue. Note:
(quoted diff) +0 -0
b/drivers/staging/rt3090/sta_ioctl.c
index b8ab84a..b1c2b5a 100644
drivers/staging/rt3090/sta_ioctl.c +0 -0
@@ -5000,7 +5000,7 @@ INT RTMPQueryInformation(// add the most up-to-date h/w raw counters into
software counters
NICUpdateRawCounters(pAd);
- // Sanity check for calculation of sucessful count
+ // Sanity check for calculation of successful count
if
(pAd->WlanCounters.TransmittedFragmentCount.QuadPart < pAd->WlanCounters.RetryCount.QuadPart)
pAd->WlanCounters.TransmittedFragmentCount.QuadPart = pAd->WlanCounters.RetryCount.QuadPart;
drivers/staging/sep/sep_driver.c +0 -0
@@ -2447,7 +2447,7 @@ static void sep_configure_dma_burst(struct
sep_device *sep)
#endif
/*
- Function that is activaed on the succesful probe of the SEP device
+ Function that is activaed on the successful probe of the SEP device */
static int __devinit sep_probe(struct pci_dev *pdev, const structpci_device_id *ent)
{
(quoted diff) +0 -0
b/drivers/staging/vt6655/device_main.c
index 53450b4..0db8d7b 100644
drivers/staging/vt6655/device_main.c +0 -0
@@ -661,7 +661,7 @@ elseif (zonetype!=pDevice->abyEEPROM[EEP_OFS_ZONETYPE ]) printk("zonetype in file[%02x] mismatch with in
EEPROM[%02x]\n",zonetype,pDevice->abyEEPROM[EEP_OFS_ZONETYPE]);
else
- printk("Read Zonetype file sucess,use default zonetype
setting[%02x]\n",zonetype);
+ printk("Read Zonetype file success,use default zonetype
setting[%02x]\n",zonetype);
}
}
else
drivers/staging/vt6655/ioctl.c +0 -1
@@ -692,7 +692,7 @@ if(wpa_Result.authenticated==TRUE) { wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, pItemSSID->abySSID); }#endif - pDevice->fWPA_Authened = TRUE;//is sucessful peer
to wpa_Result.authenticated?
+ pDevice->fWPA_Authened = TRUE; //is successful
peer to wpa_Result.authenticated?
}
//printk("get private wpa_supplicant announce WPA SM\n");drivers/staging/vt6655/mib.h +2 -2
@@ -325,10 +325,10 @@ typedef struct tagSStatCounter {#ifdef Calcu_LinkQual//Tx count: ULONG TxNoRetryOkCount;//success tx no retry ! -ULONG TxRetryOkCount;//sucess tx but retry ! +ULONG TxRetryOkCount;//success tx but retry ! ULONG TxFailCount;//fail tx ? //Rx count: -ULONG RxOkCnt;//sucess rx ! +ULONG RxOkCnt;//success rx ! ULONG RxFcsErrCnt;//fail rx ? //statistic ULONG SignalStren;
(quoted diff) +0 -0
b/drivers/staging/vt6656/baseband.c
index 820a7b8..49f419e 100644
drivers/staging/vt6656/baseband.c +0 -0
@@ -1041,7 +1041,7 @@ else {if (pDevice->config_file.ZoneType !=pDevice->abyEEPROM[EEP_OFS_ZONETYPE ]) printk("zonetype in file[%02x] mismatch with in
EEPROM[%02x]\n",pDevice->config_file.ZoneType,pDevice->abyEEPROM[EEP_OFS_ZONETYPE]);
else
- printk("Read Zonetype file sucess,use default zonetype
setting[%02x]\n",pDevice->config_file.ZoneType);
+ printk("Read Zonetype file success,use default zonetype
setting[%02x]\n",pDevice->config_file.ZoneType);
}
}
drivers/staging/vt6656/ioctl.c +0 -1
@@ -679,7 +679,7 @@ if(wpa_Result.authenticated==TRUE) { wireless_send_event(pDevice->dev, IWEVCUSTOM, &wrqu, pItemSSID->abySSID); }#endif - pDevice->fWPA_Authened = TRUE;//is sucessful peer
to wpa_Result.authenticated?
+ pDevice->fWPA_Authened = TRUE; //is successful
peer to wpa_Result.authenticated?
}
//printk("get private wpa_supplicant announce WPA SM\n");drivers/staging/vt6656/iwctl.c +1 -1
@@ -1724,7 +1724,7 @@ int iwctl_siwauth(struct net_device *dev,case IW_AUTH_WPA_ENABLED ://pDevice->bWPADEVUp = !! wrq->value; //if(pDevice->bWPADEVUp==TRUE) -// printk("iwctl_siwauth:set WPADEV to enable sucessful*******\n"); +// printk("iwctl_siwauth:set WPADEV to enable successful*******\n"); //else // printk("iwctl_siwauth:set WPADEV to enable fail?????\n"); break ;
(quoted diff) +0 -0
b/drivers/staging/vt6656/main_usb.c
index 7f96bca..fefec79 100644
drivers/staging/vt6656/main_usb.c +1 -1
@@ -1546,7 +1546,7 @@ if(result!=0) {return buffer; } -//return --->-1:fail; >=0:sucessful +//return --->-1:fail; >=0:successful static int Read_config_file (PSDevice pDevice) {int result=0 ;UCHAR tmpbuffer[100 ];
drivers/staging/vt6656/mib.h +2 -2
@@ -357,10 +357,10 @@ typedef struct tagSStatCounter {#ifdef Calcu_LinkQual//Tx count: ULONG TxNoRetryOkCount;//success tx no retry ! -ULONG TxRetryOkCount;//sucess tx but retry ! +ULONG TxRetryOkCount;//success tx but retry ! ULONG TxFailCount;//fail tx ? //Rx count: -ULONG RxOkCnt;//sucess rx ! +ULONG RxOkCnt;//success rx ! ULONG RxFcsErrCnt;//fail rx ? //statistic ULONG SignalStren;
drivers/staging/vt6656/wcmd.c +1 -1
@@ -1332,7 +1332,7 @@ BSSvSecondTxData( }spin_lock_irq (&pDevice->lock); -//is wap_supplicant running sucessful OR only open && sharekey mode! +//is wap_supplicant running successful OR only open && sharekey mode! #if 1 if(((pDevice->bLinkPass ==TRUE)&&(pMgmt->eAuthenMode <
WMAC_AUTH_WPA)) || //open && sharekey linking
(pDevice->fWPA_Authened == TRUE)) { //wpa linkingdrivers/usb/core/message.c +0 -0
@@ -1890,7 +1890,7 @@ static void cancel_async_set_config(struct
usb_device *udev)
* routine gets around the normal restrictions by using a work thread to
* submit the change-config request.
*
- * Returns 0 if the request was succesfully queued, error code otherwise.
+ * Returns 0 if the request was successfully queued, error code otherwise.
* The caller has no way to know whether the queued request will eventually
* succeed.
*/
drivers/usb/gadget/f_acm.c +1 -1
@@ -432,7 +432,7 @@ static void acm_disable(struct usb_function *f)* @length: size of data * Context: irqs blocked, acm->lock held, acm_notify_req non-null * -* Returns zero on sucess or a negative errno. +* Returns zero on success or a negative errno. * * See section 6.3.5 of the CDC 1.1 specification for information * about the only notification we issue: SerialState change.
drivers/usb/gadget/pxa27x_udc.c +1 -1
@@ -1524,7 +1524,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget)* pxa_udc_wakeup - Force udc device out of suspend * @_gadget: usb gadget * -* Returns 0 if succesfull, error code otherwise +* Returns 0 if successfull, error code otherwise */ static int pxa_udc_wakeup (struct usb_gadget *_gadget) {
drivers/usb/host/fhci-sched.c +1 -1
@@ -627,7 +627,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)/* -* Process normal completions(error or sucess) and clean the schedule. +* Process normal completions(error or success) and clean the schedule. * * This is the main path for handing urbs back to drivers. The only other patth * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
drivers/usb/wusbcore/crypto.c +1 -1
@@ -111,7 +111,7 @@ struct aes_ccm_b1 {* * CCM uses Ax blocks to generate a keystream with which the MIC and * the message's payload are encoded. A0 always encrypts/decrypts the -* MIC. Ax (x>0) are used for the sucesive payload blocks. +* MIC. Ax (x>0) are used for the successive payload blocks. * * The x is the counter, and is increased for each block. */
drivers/usb/wusbcore/wa-xfer.c +2 -2
@@ -558,7 +558,7 @@ static void wa_seg_dto_cb(struct urb *urb)/* * Callback for the segment request * -* If succesful transition state (unless already transitioned or +* If successful transition state (unless already transitioned or * outbound transfer); otherwise, take a note of the error, mark this * segment done and try completion. *
@@ -1364,7 +1364,7 @@ segment_aborted:/* * Callback for the IN data phase * -* If succesful transition state; otherwise, take a note of the +* If successful transition state; otherwise, take a note of the * error, mark this segment done and try completion. * * Note we don't access until we are sure that the transfer hasn't
drivers/uwb/i1480/dfu/usb.c +1 -1
@@ -229,7 +229,7 @@ void i1480_usb_neep_cb(struct urb *urb)* will verify it. * * Set i1480->evt_result with the result of getting the event or its -* size (if succesful). +* size (if successful). * * Delivers the data directly to i1480->evt_buf */
drivers/uwb/wlp/txrx.c +1 -1
@@ -282,7 +282,7 @@ EXPORT_SYMBOL_GPL(wlp_receive_frame);* and transmission will be done by the calling function. * @dst: On return this will contain the device address to which the * frame is destined. -* @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer, +* @returns: 0 on success no tx : WLP header successfully applied to
skb buffer,
* calling function can proceed with tx
* 1 on success with tx : WLP will take over transmission of this
* frame
drivers/watchdog/wdrtas.c +3 -3
@@ -542,7 +542,7 @@ static struct notifier_block wdrtas_notifier = {/** * wdrtas_get_tokens - reads in RTAS tokens * -* returns 0 on succes, <0 on failure +* returns 0 on success, <0 on failure * * wdrtas_get_tokens reads in the tokens for the RTAS calls used in * this watchdog driver. It tolerates, if "get-sensor-state" and
@@ -598,7 +598,7 @@ static void wdrtas_unregister_devs(void)/** * wdrtas_register_devs - registers the misc dev handlers * -* returns 0 on succes, <0 on failure +* returns 0 on success, <0 on failure * * wdrtas_register_devs registers the watchdog and temperature watchdog * misc devs
@@ -630,7 +630,7 @@ static int wdrtas_register_devs(void)/** * wdrtas_init - init function of the watchdog driver * -* returns 0 on succes, <0 on failure +* returns 0 on success, <0 on failure * * registers the file handlers and the reboot notifier */
fs/bio.c +1 -1
@@ -272,7 +272,7 @@ EXPORT_SYMBOL(bio_init);* for a &struct bio to become free. If a %NULL @bs is passed in, we will * fall back to just using @kmalloc to allocate the required memory. * -* Note that the caller must set ->bi_destructor on succesful return +* Note that the caller must set ->bi_destructor on successful return * of a bio, to do the appropriate freeing of the bio once the reference * count drops to zero. **/
fs/btrfs/extent_map.c +1 -1
@@ -256,7 +256,7 @@ out:* Insert @em into @tree or perform a simple forward/backward merge with * existing mappings. The extent_map struct passed in will be inserted * into the tree directly, with an additional reference taken, or a -* reference dropped if the merge attempt was sucessfull. +* reference dropped if the merge attempt was successfull. */ int add_extent_mapping (struct extent_map_tree *tree,struct extent_map *em)
fs/dlm/plock.c +1 -1
@@ -143,7 +143,7 @@ out: }EXPORT_SYMBOL_GPL (dlm_posix_lock); -/* Returns failure iff a succesful lock operation should be canceled */ +/* Returns failure iff a successful lock operation should be canceled */ static int dlm_plock_callback (struct plock_op *op) {struct file *file;
fs/jffs2/readinode.c +0 -0
@@ -931,7 +931,7 @@ static inline int read_unknown(struct
jffs2_sb_info *c, struct jffs2_raw_node_re
* Helper function for jffs2_get_inode_nodes().
* The function detects whether more data should be read and reads it if yes. *
- * Returns: 0 on succes;
+ * Returns: 0 on success;
* negative error code on failure.
*/
static int read_more(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref,
fs/ntfs/file.c +1 -1
@@ -1281,7 +1281,7 @@ rl_not_mapped_enoent:/* * Copy as much as we can into the pages and return the number of bytes which -* were sucessfully copied. If a fault is encountered then clear the pages +* were successfully copied. If a fault is encountered then clear the pages * out to (ofs + bytes) and return the number of bytes which were copied. */ static inline size_t ntfs_copy_from_user(struct page **pages,
fs/ntfs/logfile.c +1 -1
@@ -338,7 +338,7 @@ err_out:* copy of the complete multi sector transfer deprotected page. On failure, * *@wrp is undefined. * -* Simillarly, if @lsn is not NULL, on succes *@lsn will be set to the current +* Simillarly, if @lsn is not NULL, on success *@lsn will be set to the current * logfile lsn according to this restart page. On failure, *@lsn is undefined. * * The following error codes are defined:
fs/ocfs2/alloc.c +0 -0
@@ -2398,7 +2398,7 @@ static int ocfs2_leftmost_rec_contains(struct
ocfs2_extent_list *el, u32 cpos)
*
* The array is assumed to be large enough to hold an entire path (tree depth). *
- * Upon succesful return from this function:
+ * Upon successful return from this function:
*
* - The 'right_path' array will contain a path to the leaf block
* whose range contains e_cpos.
fs/ocfs2/dlmglue.c +0 -0
@@ -1855,7 +1855,7 @@ int ocfs2_file_lock(struct file *file, int ex,
int trylock)
* outstanding lock request, so a cancel convert is
* required. We intentionally overwrite 'ret' - if the
* cancel fails and the lock was granted, it's easier
- * to just bubble sucess back up to the user.
+ * to just bubble success back up to the user.
*/
ret = ocfs2_flock_handle_signal(lockres, level);
} else if (!ret && (level > lockres->l_level)) {
fs/omfs/bitmap.c +1 -1
@@ -85,7 +85,7 @@ out: }/* -* Tries to allocate exactly one block. Returns true if sucessful. +* Tries to allocate exactly one block. Returns true if successful. */ int omfs_allocate_block (struct super_block *sb,u64 block) {
fs/ubifs/recovery.c +1 -1
@@ -23,7 +23,7 @@/* * This file implements functions needed to recover from unclean un-mounts. * When UBIFS is mounted, it checks a flag on the master node to determine if -* an un-mount was completed sucessfully. If not, the process of mounting +* an un-mount was completed successfully. If not, the process of mounting * incorparates additional checking and fixing of on-flash data structures. * UBIFS always cleans away all remnants of an unclean un-mount, so that * errors do not accumulate. However UBIFS defers recovery if it is mounted
include/linux/pktcdvd.h +1 -1
@@ -30,7 +30,7 @@/* * use drive write caching -- we need deferred error handling to be -* able to sucessfully recover with this option (drive will return good +* able to successfully recover with this option (drive will return good * status as soon as the cdb is validated). */ #if defined(CONFIG_CDROM_PKTCDVD_WCACHE )
include/net/tcp.h +0 -0
@@ -1260,7 +1260,7 @@ static inline struct sk_buff
*tcp_write_queue_prev(struct sock *sk, struct sk_bu
skb_queue_walk_from_safe(&(sk)->sk_write_queue, skb, tmp)
/* This function calculates a "timeout" which is equivalent to the timeout of a
- * TCP connection after "boundary" unsucessful, exponentially backed-off
+ * TCP connection after "boundary" unsuccessful, exponentially backed-off
* retransmissions with an initial RTO of TCP_RTO_MIN.
*/
static inline bool retransmits_timed_out(const struct sock *sk,
kernel/perf_event.c +0 -0
@@ -420,7 +420,7 @@ static void perf_event_remove_from_context(struct
perf_event *event)
if (!task) {
/*
* Per cpu events are removed via an smp call and
- * the removal is always sucessful.
+ * the removal is always successful.
*/
smp_call_function_single(event->cpu,
__perf_event_remove_from_context,
@@ -828,7 +828,7 @@ perf_install_in_context(struct perf_event_context *ctx,
if (!task) {
/*
* Per cpu events are installed via an smp call and
- * the install is always sucessful.
+ * the install is always successful.
*/
smp_call_function_single(cpu, __perf_install_in_context,
event, 1);
mm/filemap.c +0 -1
@@ -1844,7 +1844,7 @@ static size_t __iovec_copy_from_user_inatomic(char *vaddr,/* * Copy as much as we can into the page and return the number of bytes which -* were sucessfully copied. If a fault is encountered then return
the number of
+ * were successfully copied. If a fault is encountered then return the number of
* bytes which were copied.
*/
size_t iov_iter_copy_from_user_atomic(struct page *page,
net/mac80211/mesh_pathtbl.c +0 -0
@@ -244,7 +244,7 @@ struct mesh_path *mesh_path_lookup_by_idx(int idx,
struct ieee80211_sub_if_data
* @addr: destination address of the path (ETH_ALEN length)
* @sdata: local subif
*
- * Returns: 0 on sucess
+ * Returns: 0 on success
*
* State: the initial state of the new path is set to 0
*/
@@ -530,7 +530,7 @@ static void mesh_path_node_reclaim(struct rcu_head *rp)
* @addr: dst address (ETH_ALEN length)
* @sdata: local subif
*
- * Returns: 0 if succesful
+ * Returns: 0 if successful
*/
int mesh_path_del(u8 *addr, struct ieee80211_sub_if_data *sdata) {
(quoted diff) +0 -0
b/net/netlabel/netlabel_domainhash.c
index 7a10bbe..c5d9f97 100644
net/netlabel/netlabel_domainhash.c +0 -0
@@ -682,7 +682,7 @@ struct netlbl_domaddr6_map
*netlbl_domhsh_getentry_af6(const char *domain,
* buckets and @skip_chain entries. For each entry in the table call
* @callback, if @callback returns a negative value stop 'walking' through the
* table and return. Updates the values in @skip_bkt and @skip_chain on
- * return. Returns zero on succcess, negative values on failure.
+ * return. Returns zero on success, negative values on failure. *
*/
int netlbl_domhsh_walk(u32 *skip_bkt,
net/sctp/sm_sideeffect.c +1 -1
@@ -719,7 +719,7 @@ static void sctp_cmd_new_state(sctp_cmd_seq_t *cmds,if (sctp_style (sk,TCP )) {/* Change the sk->sk_state of a TCP-style socket that has -* sucessfully completed a connect() call. +* successfully completed a connect() call. */ if (sctp_state (asoc,ESTABLISHED ) &&sctp_sstate (sk,CLOSED )) sk->sk_state =SCTP_SS_ESTABLISHED ;
net/wimax/op-reset.c +1 -1
@@ -62,7 +62,7 @@* Called when wanting to reset the device for any reason. Device is * taken back to power on status. * -* This call blocks; on succesful return, the device has completed the +* This call blocks; on successful return, the device has completed the * reset process and is ready to operate. */ int wimax_reset (struct wimax_dev *wimax_dev)
security/selinux/netlabel.c +1 -1
@@ -204,7 +204,7 @@ int selinux_netlbl_skbuff_getsid(struct sk_buff *skb,* * Description * Call the NetLabel mechanism to set the label of a packet using @sid. -* Returns zero on auccess, negative values on failure. +* Returns zero on success, negative values on failure. * */ int selinux_netlbl_skbuff_setsid(struct sk_buff *skb,
sound/sound_core.c +1 -1
@@ -353,7 +353,7 @@ static struct sound_unit *chains[SOUND_STEP];* @dev: device pointer * * Allocate a special sound device by minor number from the sound -* subsystem. The allocated number is returned on succes. On failure +* subsystem. The allocated number is returned on success. On failure * a negative error code is returned. */
Signature · 1 line
1.6.5.2.101.gcd0f8
Am 31.10.2009 10:40 schrieb André Goddard Rosa:
Review
Quoted 5 lines
Subject: [PATCH 01/16] trivial: fix assorted "success" typos
Signed-off-by André Goddard Rosa <[email protected]>(quoted diff) +0
-0
Please provide a diffstat for that kind of patches in the future. I don't want to scan sixteen patches in their entirety just to make sure none of them touches the little driver I maintain.
Thanks,
Tilman
Signature · 4 lines
Tilman Schmidt E-Mail: [email protected] Bonn, Germany Diese Nachricht besteht zu 100% aus wiederverwerteten Bits. Ungeöffnet mindestens haltbar bis: (siehe Rückseite)
Quoted 11 lines · Tilman Schmidt
Am 31.10.2009 10:40 schrieb André Goddard Rosa:
Review
Quoted 5 lines
Subject: [PATCH 01/16] trivial: fix assorted "success" typos
Signed-off-by André Goddard Rosa <[email protected]>(quoted diff) +0
-0Please provide a diffstat for that kind of patches in the future. I don't want to scan sixteen patches in their entirety just to make sure none of them touches the little driver I maintain.
No problem, I will do it next time.
Thanks,
André