r8169: refactor and improve interrupt coalescing
Heiner Kallweit
maintainercover r8169: refactor and improve interrupt coalescing
Refactor and improve interrupt coalescing.
Heiner Kallweit (7):
r8169: don't pass net_device to irq coalescing sub-functions
r8169: merge scale for tx and rx irq coalescing
r8169: improve rtl_get_coalesce
r8169: improve rtl_coalesce_choose_scale
r8169: improve interrupt coalescing parameter handling
r8169: improve rtl_set_coalesce
r8169: add check for invalid parameter combination to rtl_set_coalesce
drivers/net/ethernet/realtek/r8169_main.c | 189 ++++++++++------------ 1 file changed, 82 insertions(+), 107 deletions(-)
Signature · 1 line
2.26.2
Heiner Kallweit
maintainerPATCH 1/7 r8169: don't pass net_device to irq coalescing sub-functions
The net_device argument is just used to get a struct rtl8169_private pointer via netdev_priv(). Therefore pass the struct rtl8169_private pointer directly.
--- drivers/net/ethernet/realtek/r8169_main.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/realtek/r8169_main.c +6 -6
@@ -1805,9 +1805,9 @@ static const struct rtl_coalesce_info rtl_coalesce_info_8168_8136[] = {#undef rxtx_x1822/* get rx/tx scale vector corresponding to current speed */ -static const struct rtl_coalesce_info *rtl_coalesce_info (struct net_device *dev) +static const struct rtl_coalesce_info * +rtl_coalesce_info (struct rtl8169_private *tp) { -struct rtl8169_private *tp =netdev_priv (dev);const struct rtl_coalesce_info *ci;if (tp->mac_version <=RTL_GIGA_MAC_VER_06 )
@@ -1844,7 +1844,7 @@ static int rtl_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)memset (ec,0 ,sizeof (*ec));/* get rx/tx scale corresponding to current speed and CPlusCmd[0:1] */ - ci =rtl_coalesce_info (dev); + ci =rtl_coalesce_info (tp);if (IS_ERR (ci))return PTR_ERR (ci);
@@ -1874,12 +1874,12 @@ static int rtl_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)/* choose appropriate scale factor and CPlusCmd[0:1] for (speed, nsec) */ static const struct rtl_coalesce_scale *rtl_coalesce_choose_scale ( -struct net_device *dev,u32 nsec,u16 *cp01) +struct rtl8169_private *tp,u32 nsec,u16 *cp01) {const struct rtl_coalesce_info *ci;u16 i; - ci =rtl_coalesce_info (dev); + ci =rtl_coalesce_info (tp);if (IS_ERR (ci))return ERR_CAST (ci);
@@ -1912,7 +1912,7 @@ static int rtl_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)if (rtl_is_8125 (tp))return -EOPNOTSUPP ; - scale =rtl_coalesce_choose_scale (dev, + scale =rtl_coalesce_choose_scale (tp,max (p[0 ].usecs, p[1 ].usecs) *1000 , &cp01);if (IS_ERR (scale))return PTR_ERR (scale);
Signature · 1 line
2.26.2
Heiner Kallweit
maintainerPATCH 2/7 r8169: merge scale for tx and rx irq coalescing
In reply to Heiner KallweitRx and tx scale are the same always. Simplify the code by using one scale for rx and tx only.
--- drivers/net/ethernet/realtek/r8169_main.c | 65 +++++++++-------------- 1 file changed, 25 insertions(+), 40 deletions(-)
drivers/net/ethernet/realtek/r8169_main.c +25 -40
@@ -1768,41 +1768,29 @@ static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data)* 1 1 160us 81.92us 1.31ms */ -/* rx/tx scale factors for one particular CPlusCmd[0:1] value */ -struct rtl_coalesce_scale { -/* Rx / Tx */ -u32 nsecs[2 ]; -}; -/* rx/tx scale factors for all CPlusCmd[0:1] cases */ struct rtl_coalesce_info {u32 speed; -struct rtl_coalesce_scale scalev[4 ];/* each CPlusCmd[0:1] case */ +u32 scale_nsecs[4 ]; }; -/* produce (r,t) pairs with each being in series of *1, *8, *8*2, *8*2*2 */ -#define rxtx_x1822 (r, t) { \ - {{(r), (t)}}, \ - {{(r)*8, (t)*8}}, \ - {{(r)*8*2, (t)*8*2}}, \ - {{(r)*8*2*2, (t)*8*2*2}}, \ -} +/* produce array with base delay *1, *8, *8*2, *8*2*2 */ +#define COALESCE_DELAY (d) { (d), 8 * (d), 16 * (d), 32 * (d) } +static const struct rtl_coalesce_info rtl_coalesce_info_8169[] = { -/* speed delays: rx00 tx00 */ - {SPEED_10 ,rxtx_x1822 (40960 ,40960 ) }, - {SPEED_100 ,rxtx_x1822 (2560 ,2560 ) }, - {SPEED_1000 ,rxtx_x1822 (320 ,320 ) }, + {SPEED_10 ,COALESCE_DELAY (40960 ) }, + {SPEED_100 ,COALESCE_DELAY (2560 ) }, + {SPEED_1000 ,COALESCE_DELAY (320 ) }, {0 }, };static const struct rtl_coalesce_info rtl_coalesce_info_8168_8136[] = { -/* speed delays: rx00 tx00 */ - {SPEED_10 ,rxtx_x1822 (40960 ,40960 ) }, - {SPEED_100 ,rxtx_x1822 (2560 ,2560 ) }, - {SPEED_1000 ,rxtx_x1822 (5000 ,5000 ) }, + {SPEED_10 ,COALESCE_DELAY (40960 ) }, + {SPEED_100 ,COALESCE_DELAY (2560 ) }, + {SPEED_1000 ,COALESCE_DELAY (5000 ) }, {0 }, }; -#undef rxtx_x1822 +#undef COALESCE_DELAY/* get rx/tx scale vector corresponding to current speed */ static const struct rtl_coalesce_info *
@@ -1827,7 +1815,6 @@ static int rtl_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) {struct rtl8169_private *tp =netdev_priv (dev);const struct rtl_coalesce_info *ci; -const struct rtl_coalesce_scale *scale;struct {u32 *max_frames;u32 *usecs;
@@ -1835,6 +1822,7 @@ static int rtl_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) { &ec->rx_max_coalesced_frames, &ec->rx_coalesce_usecs }, { &ec->tx_max_coalesced_frames, &ec->tx_coalesce_usecs } }, *p = coal_settings; +u32 scale;int i;u16 w;
@@ -1848,7 +1836,7 @@ static int rtl_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)if (IS_ERR (ci))return PTR_ERR (ci); - scale = &ci->scalev[tp->cp_cmd &INTT_MASK ]; + scale = ci->scale_nsecs[tp->cp_cmd &INTT_MASK ];/* read IntrMitigate and adjust according to scale */ for (w =RTL_R16 (tp, IntrMitigate); w; w >>=RTL_COALESCE_SHIFT , p++) {
@@ -1859,7 +1847,7 @@ static int rtl_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)for (i =0 ; i <2 ; i++) { p = coal_settings + i; - *p->usecs = (*p->usecs * scale->nsecs[i]) /1000 ; + *p->usecs = (*p->usecs * scale) /1000 ;/* * ethtool_coalesce says it is illegal to set both usecs and
@@ -1873,32 +1861,29 @@ static int rtl_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) }/* choose appropriate scale factor and CPlusCmd[0:1] for (speed, nsec) */ -static const struct rtl_coalesce_scale *rtl_coalesce_choose_scale ( -struct rtl8169_private *tp,u32 nsec,u16 *cp01) +static int rtl_coalesce_choose_scale (struct rtl8169_private *tp,u32 nsec, +u16 *cp01) {const struct rtl_coalesce_info *ci;u16 i; ci =rtl_coalesce_info (tp);if (IS_ERR (ci)) -return ERR_CAST (ci); +return PTR_ERR (ci);for (i =0 ; i <4 ; i++) { -u32 rxtx_maxscale =max (ci->scalev[i].nsecs[0 ], - ci->scalev[i].nsecs[1 ]); -if (nsec <= rxtx_maxscale *RTL_COALESCE_T_MAX ) { +if (nsec <= ci->scale_nsecs[i] *RTL_COALESCE_T_MAX ) { *cp01 = i; -return &ci->scalev[i]; +return ci->scale_nsecs[i]; } } -return ERR_PTR (-EINVAL ); +return -EINVAL ; }static int rtl_set_coalesce (struct net_device *dev,struct ethtool_coalesce *ec) {struct rtl8169_private *tp =netdev_priv (dev); -const struct rtl_coalesce_scale *scale;struct {u32 frames;u32 usecs;
@@ -1906,16 +1891,16 @@ static int rtl_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) { ec->rx_max_coalesced_frames, ec->rx_coalesce_usecs }, { ec->tx_max_coalesced_frames, ec->tx_coalesce_usecs } }, *p = coal_settings; -u16 w =0 , cp01; -int i; +u16 w =0 , cp01 =0 ; +int scale, i;if (rtl_is_8125 (tp))return -EOPNOTSUPP ; scale =rtl_coalesce_choose_scale (tp,max (p[0 ].usecs, p[1 ].usecs) *1000 , &cp01); -if (IS_ERR (scale)) -return PTR_ERR (scale); +if (scale <0 ) +return scale;for (i =0 ; i <2 ; i++, p++) {u32 units;
@@ -1936,7 +1921,7 @@ static int rtl_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) p->frames =0 ; } - units = p->usecs *1000 / scale->nsecs[i]; + units = p->usecs *1000 / scale;if (p->frames >RTL_COALESCE_FRAME_MAX || p->frames %4 )return -EINVAL ;
Signature · 1 line
2.26.2
Heiner Kallweit
maintainerPATCH 3/7 r8169: improve rtl_get_coalesce
In reply to Heiner KallweitUse FIELD_GET() macro to make the code better readable. In addition change the logic to round the time limit up, not down. Reason is that a time limit <1us would be rounded to 0 currently, what would be interpreted as "no time limit set".
--- drivers/net/ethernet/realtek/r8169_main.c | 46 ++++++++++------------- 1 file changed, 20 insertions(+), 26 deletions(-)
drivers/net/ethernet/realtek/r8169_main.c +20 -26
@@ -27,6 +27,7 @@#include <linux/interrupt.h> #include <linux/dma-mapping.h> #include <linux/pm_runtime.h> +#include <linux/bitfield.h> #include <linux/prefetch.h> #include <linux/ipv6.h> #include <net/ip6_checksum.h>
@@ -229,6 +230,11 @@ enum rtl_registers { CPlusCmd = 0xe0, IntrMitigate = 0xe2, +#define RTL_COALESCE_TX_USECS GENMASK(15, 12) +#define RTL_COALESCE_TX_FRAMES GENMASK(11, 8) +#define RTL_COALESCE_RX_USECS GENMASK(7, 4) +#define RTL_COALESCE_RX_FRAMES GENMASK(3, 0) +#define RTL_COALESCE_MASK 0x0f#define RTL_COALESCE_SHIFT 4#define RTL_COALESCE_T_MAX (RTL_COALESCE_MASK)
@@ -1815,16 +1821,8 @@ static int rtl_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) {struct rtl8169_private *tp =netdev_priv (dev);const struct rtl_coalesce_info *ci; -struct { -u32 *max_frames; -u32 *usecs; - } coal_settings [] = { - { &ec->rx_max_coalesced_frames, &ec->rx_coalesce_usecs }, - { &ec->tx_max_coalesced_frames, &ec->tx_coalesce_usecs } - }, *p = coal_settings; -u32 scale; -int i; -u16 w; +u32 scale, c_us, c_fr; +u16 intrmit;if (rtl_is_8125 (tp))return -EOPNOTSUPP ;
@@ -1838,24 +1836,20 @@ static int rtl_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) scale = ci->scale_nsecs[tp->cp_cmd &INTT_MASK ]; -/* read IntrMitigate and adjust according to scale */ -for (w =RTL_R16 (tp, IntrMitigate); w; w >>=RTL_COALESCE_SHIFT , p++) { - *p->max_frames = (w &RTL_COALESCE_MASK ) <<2 ; - w >>=RTL_COALESCE_SHIFT ; - *p->usecs = w &RTL_COALESCE_MASK ; - } + intrmit =RTL_R16 (tp, IntrMitigate); -for (i =0 ; i <2 ; i++) { - p = coal_settings + i; - *p->usecs = (*p->usecs * scale) /1000 ; + c_us =FIELD_GET (RTL_COALESCE_TX_USECS , intrmit); + ec->tx_coalesce_usecs =DIV_ROUND_UP (c_us * scale,1000 ); -/* -* ethtool_coalesce says it is illegal to set both usecs and -* max_frames to 0. -*/ -if (!*p->usecs && !*p->max_frames) - *p->max_frames =1 ; - } + c_fr =FIELD_GET (RTL_COALESCE_TX_FRAMES , intrmit); +/* ethtool_coalesce states usecs and max_frames must not both be 0 */ + ec->tx_max_coalesced_frames = (c_us || c_fr) ? c_fr *4 :1 ; + + c_us =FIELD_GET (RTL_COALESCE_RX_USECS , intrmit); + ec->rx_coalesce_usecs =DIV_ROUND_UP (c_us * scale,1000 ); + + c_fr =FIELD_GET (RTL_COALESCE_RX_FRAMES , intrmit); + ec->rx_max_coalesced_frames = (c_us || c_fr) ? c_fr *4 :1 ;return 0 ; }
Signature · 1 line
2.26.2
Heiner Kallweit
maintainerPATCH 4/7 r8169: improve rtl_coalesce_choose_scale
In reply to Heiner KallweitThe time limit provided by userspace is multiplied with 1000, what could result in an overflow. Therefore change the time limit parameter unit from ns to us, and avoid the problematic operation. If there's no matching scale because provided time limit is too big, return ERANGE instead of EINVAL to provide a hint to the user what's wrong.
--- drivers/net/ethernet/realtek/r8169_main.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/net/ethernet/realtek/r8169_main.c +7 -6
@@ -1854,8 +1854,8 @@ static int rtl_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)return 0 ; } -/* choose appropriate scale factor and CPlusCmd[0:1] for (speed, nsec) */ -static int rtl_coalesce_choose_scale (struct rtl8169_private *tp,u32 nsec, +/* choose appropriate scale factor and CPlusCmd[0:1] for (speed, usec) */ +static int rtl_coalesce_choose_scale (struct rtl8169_private *tp,u32 usec,u16 *cp01) {const struct rtl_coalesce_info *ci;
@@ -1866,13 +1866,13 @@ static int rtl_coalesce_choose_scale(struct rtl8169_private *tp, u32 nsec,return PTR_ERR (ci);for (i =0 ; i <4 ; i++) { -if (nsec <= ci->scale_nsecs[i] *RTL_COALESCE_T_MAX ) { +if (usec <= ci->scale_nsecs[i] *RTL_COALESCE_T_MAX /1000U ) { *cp01 = i;return ci->scale_nsecs[i]; } } -return -EINVAL ; +return -ERANGE ; }static int rtl_set_coalesce (struct net_device *dev,struct ethtool_coalesce *ec)
@@ -1886,13 +1886,14 @@ static int rtl_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) { ec->tx_max_coalesced_frames, ec->tx_coalesce_usecs } }, *p = coal_settings;u16 w =0 , cp01 =0 ; +u32 coal_usec_max;int scale, i;if (rtl_is_8125 (tp))return -EOPNOTSUPP ; - scale =rtl_coalesce_choose_scale (tp, -max (p[0 ].usecs, p[1 ].usecs) *1000 , &cp01); + coal_usec_max =max (ec->rx_coalesce_usecs, ec->tx_coalesce_usecs); + scale =rtl_coalesce_choose_scale (tp, coal_usec_max, &cp01);if (scale <0 )return scale;
Signature · 1 line
2.26.2
Heiner Kallweit
maintainerPATCH 5/7 r8169: improve interrupt coalescing parameter handling
In reply to Heiner KallweitThe chip supports only frame limits 0, 4, 8, .. 60 internally. Returning EINVAL for all val % 4 != 0 seems to be a little bit too unfriendly to the user. Therefore round up the frame limit to the next supported value. In addition round up the time limit, else a very low limit could be rounded down to 0, and interpreted as "ignore value" by the chip.
--- drivers/net/ethernet/realtek/r8169_main.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/realtek/r8169_main.c +6 -6
@@ -1909,21 +1909,21 @@ static int rtl_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)* - then user does `ethtool -C eth0 rx-usecs 100` * * since ethtool sends to kernel whole ethtool_coalesce -* settings, if we do not handle rx_usecs=!0, rx_frames=1 -* we'll reject it below in `frames % 4 != 0`. +* settings, if we want to ignore rx_frames then it has +* to be set to 0. */ if (p->frames ==1 ) { p->frames =0 ; } - units = p->usecs *1000 / scale; -if (p->frames >RTL_COALESCE_FRAME_MAX || p->frames %4 ) -return -EINVAL ; + units =DIV_ROUND_UP (p->usecs *1000 , scale); +if (p->frames >RTL_COALESCE_FRAME_MAX ) +return -ERANGE ; w <<=RTL_COALESCE_SHIFT ; w |= units; w <<=RTL_COALESCE_SHIFT ; - w |= p->frames >>2 ; + w |=DIV_ROUND_UP (p->frames,4 ); }rtl_lock_work (tp);
Signature · 1 line
2.26.2
Heiner Kallweit
maintainerPATCH 6/7 r8169: improve rtl_set_coalesce
In reply to Heiner KallweitUse FIELD_PREP() to make the code better readable, and avoid the loop. No functional change intended.
--- drivers/net/ethernet/realtek/r8169_main.c | 70 ++++++++++------------- 1 file changed, 30 insertions(+), 40 deletions(-)
drivers/net/ethernet/realtek/r8169_main.c +30 -40
@@ -235,10 +235,8 @@ enum rtl_registers {#define RTL_COALESCE_RX_USECS GENMASK(7, 4)#define RTL_COALESCE_RX_FRAMES GENMASK(3, 0) -#define RTL_COALESCE_MASK 0x0f -#define RTL_COALESCE_SHIFT 4 -#define RTL_COALESCE_T_MAX (RTL_COALESCE_MASK) -#define RTL_COALESCE_FRAME_MAX (RTL_COALESCE_MASK << 2) +#define RTL_COALESCE_T_MAX 0x0fU +#define RTL_COALESCE_FRAME_MAX (RTL_COALESCE_T_MAX * 4) RxDescAddrLow =0xe4 , RxDescAddrHigh = 0xe8,
@@ -1878,57 +1876,49 @@ static int rtl_coalesce_choose_scale(struct rtl8169_private *tp, u32 usec,static int rtl_set_coalesce (struct net_device *dev,struct ethtool_coalesce *ec) {struct rtl8169_private *tp =netdev_priv (dev); -struct { -u32 frames; -u32 usecs; - } coal_settings [] = { - { ec->rx_max_coalesced_frames, ec->rx_coalesce_usecs }, - { ec->tx_max_coalesced_frames, ec->tx_coalesce_usecs } - }, *p = coal_settings; +u32 tx_fr = ec->tx_max_coalesced_frames; +u32 rx_fr = ec->rx_max_coalesced_frames; +u32 coal_usec_max, units;u16 w =0 , cp01 =0 ; -u32 coal_usec_max; -int scale, i; +int scale;if (rtl_is_8125 (tp))return -EOPNOTSUPP ; +if (rx_fr >RTL_COALESCE_FRAME_MAX || tx_fr >RTL_COALESCE_FRAME_MAX ) +return -ERANGE ; + coal_usec_max =max (ec->rx_coalesce_usecs, ec->tx_coalesce_usecs); scale =rtl_coalesce_choose_scale (tp, coal_usec_max, &cp01);if (scale <0 )return scale; -for (i =0 ; i <2 ; i++, p++) { -u32 units; - -/* -* accept max_frames=1 we returned in rtl_get_coalesce. -* accept it not only when usecs=0 because of e.g. the following scenario: -* -* - both rx_usecs=0 & rx_frames=0 in hardware (no delay on RX) -* - rtl_get_coalesce returns rx_usecs=0, rx_frames=1 -* - then user does `ethtool -C eth0 rx-usecs 100` -* -* since ethtool sends to kernel whole ethtool_coalesce -* settings, if we want to ignore rx_frames then it has -* to be set to 0. -*/ -if (p->frames ==1 ) { - p->frames =0 ; - } +/* Accept max_frames=1 we returned in rtl_get_coalesce. Accept it +* not only when usecs=0 because of e.g. the following scenario: +* +* - both rx_usecs=0 & rx_frames=0 in hardware (no delay on RX) +* - rtl_get_coalesce returns rx_usecs=0, rx_frames=1 +* - then user does `ethtool -C eth0 rx-usecs 100` +* +* Since ethtool sends to kernel whole ethtool_coalesce settings, +* if we want to ignore rx_frames then it has to be set to 0. +*/ +if (rx_fr ==1 ) + rx_fr =0 ; +if (tx_fr ==1 ) + tx_fr =0 ; - units =DIV_ROUND_UP (p->usecs *1000 , scale); -if (p->frames >RTL_COALESCE_FRAME_MAX ) -return -ERANGE ; + w |=FIELD_PREP (RTL_COALESCE_TX_FRAMES ,DIV_ROUND_UP (tx_fr,4 )); + w |=FIELD_PREP (RTL_COALESCE_RX_FRAMES ,DIV_ROUND_UP (rx_fr,4 )); - w <<=RTL_COALESCE_SHIFT ; - w |= units; - w <<=RTL_COALESCE_SHIFT ; - w |=DIV_ROUND_UP (p->frames,4 ); - } + units =DIV_ROUND_UP (ec->tx_coalesce_usecs *1000U , scale); + w |=FIELD_PREP (RTL_COALESCE_TX_USECS , units); + units =DIV_ROUND_UP (ec->rx_coalesce_usecs *1000U , scale); + w |=FIELD_PREP (RTL_COALESCE_RX_USECS , units);rtl_lock_work (tp); -RTL_W16 (tp, IntrMitigate,swab16 (w)); +RTL_W16 (tp, IntrMitigate, w); tp->cp_cmd = (tp->cp_cmd & ~INTT_MASK ) | cp01;RTL_W16 (tp, CPlusCmd, tp->cp_cmd);
Signature · 1 line
2.26.2
Heiner Kallweit
maintainerPATCH 7/7 r8169: add check for invalid parameter combination in rtl_set_coalesce
In reply to Heiner KallweitRealtek provided information about a HW constraint that time limit must not be set to 0 if the frame limit is >0. Add a check for this and reject invalid parameter combinations.
--- drivers/net/ethernet/realtek/r8169_main.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/net/ethernet/realtek/r8169_main.c +5 -0
@@ -1908,6 +1908,11 @@ static int rtl_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)if (tx_fr ==1 ) tx_fr =0 ; +/* HW requires time limit to be set if frame limit is set */ +if ((tx_fr && !ec->tx_coalesce_usecs) || + (rx_fr && !ec->rx_coalesce_usecs)) +return -EINVAL ; + w |=FIELD_PREP (RTL_COALESCE_TX_FRAMES ,DIV_ROUND_UP (tx_fr,4 )); w |=FIELD_PREP (RTL_COALESCE_RX_FRAMES ,DIV_ROUND_UP (rx_fr,4 ));
Signature · 1 line
2.26.2
Quoted 1 line · On Thu, 30 Apr 2020 21:54:43 +0200 Heiner Kallweit wrote:
Refactor and improve interrupt coalescing.
Looks like a nice clean up!
David Miller
maintainerFrom: Jakub Kicinski <[email protected]>
Date: Thu, 30 Apr 2020 14:51:10 -0700
Quoted 6 lines · On Thu, 30 Apr 2020 21:54:43 +0200 Heiner Kallweit wrote:
Quoted 1 line
Refactor and improve interrupt coalescing.
Looks like a nice clean up!
Reviewed-by Jakub Kicinski <[email protected]>
Series applied, thanks everyone.