Skip to contentSkip to conversation

staging: rtl8723bs: core: simplify the if condition

PATCH In review Saurav Girepunje 3 participants 4 messages Oct 9, 2021 – Oct 11, 2021 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 staging: rtl8723bs: core: simplify the if condition

if psta is NULL, function is returning with fail. On next if condition again checking if psta is not a NULL. Remove multiple if condition check.

Function is already using goto exit statement to exit.Replace multiple return with goto exit statement.

---
 drivers/staging/rtl8723bs/core/rtw_xmit.c | 61 ++++++++++-------------
 1 file changed, 26 insertions(+), 35 deletions(-)
drivers/staging/rtl8723bs/core/rtw_xmit.c +26 -35
index 34505b35a7f3..4e4a1bed882b 100644
@@ -932,49 +932,40 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
 		/* TODO: fill HT Control Field */
 
 		/* Update Seq Num will be handled by f/w */
-		{
-			struct sta_info *psta;
-
-			psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
-			if (pattrib->psta != psta)
-				return _FAIL;
-
-			if (!psta)
-				return _FAIL;
+		struct sta_info *psta;
 
-			if (!(psta->state & _FW_LINKED))
-				return _FAIL;
+		psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
+		if (!psta || pattrib->psta != psta || !(psta->state & _FW_LINKED))
+			res = _FAIL;
+			goto exit;
 
-			if (psta) {
-				psta->sta_xmitpriv.txseq_tid[pattrib->priority]++;
-				psta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF;
-				pattrib->seqnum = psta->sta_xmitpriv.txseq_tid[pattrib->priority];
+		psta->sta_xmitpriv.txseq_tid[pattrib->priority]++;
+		psta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF;
+		pattrib->seqnum = psta->sta_xmitpriv.txseq_tid[pattrib->priority];
 
-				SetSeqNum(hdr, pattrib->seqnum);
+		SetSeqNum(hdr, pattrib->seqnum);
 
-				/* check if enable ampdu */
-				if (pattrib->ht_en && psta->htpriv.ampdu_enable)
-					if (psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority))
-						pattrib->ampdu_en = true;
+		/* check if enable ampdu */
+		if (pattrib->ht_en && psta->htpriv.ampdu_enable)
+			if (psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority))
+				pattrib->ampdu_en = true;
 
-				/* re-check if enable ampdu by BA_starting_seqctrl */
-				if (pattrib->ampdu_en == true) {
-					u16 tx_seq;
+		/* re-check if enable ampdu by BA_starting_seqctrl */
+		if (pattrib->ampdu_en == true) {
+			u16 tx_seq;
 
-					tx_seq = psta->BA_starting_seqctrl[pattrib->priority & 0x0f];
+			tx_seq = psta->BA_starting_seqctrl[pattrib->priority & 0x0f];
 
-					/* check BA_starting_seqctrl */
-					if (SN_LESS(pattrib->seqnum, tx_seq)) {
-						pattrib->ampdu_en = false;/* AGG BK */
-					} else if (SN_EQUAL(pattrib->seqnum, tx_seq)) {
-						psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (tx_seq+1)&0xfff;
+			/* check BA_starting_seqctrl */
+			if (SN_LESS(pattrib->seqnum, tx_seq)) {
+				pattrib->ampdu_en = false;/* AGG BK */
+			} else if (SN_EQUAL(pattrib->seqnum, tx_seq)) {
+				psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (tx_seq+1)&0xfff;
 
-						pattrib->ampdu_en = true;/* AGG EN */
-					} else {
-						psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (pattrib->seqnum+1)&0xfff;
-						pattrib->ampdu_en = true;/* AGG EN */
-					}
-				}
+				pattrib->ampdu_en = true;/* AGG EN */
+			} else {
+				psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (pattrib->seqnum+1)&0xfff;
+				pattrib->ampdu_en = true;/* AGG EN */
 			}
 		}
 	}

--
2.32.0

#1 lore raw

Hi,

Quoted 19 lines · Saurav Girepunje

if psta is NULL, function is returning with fail. On next if condition again checking if psta is not a NULL. Remove multiple if condition check.

Function is already using goto exit statement to exit.Replace multiple return with goto exit statement.

---
 drivers/staging/rtl8723bs/core/rtw_xmit.c | 61 ++++++++++-------------
 1 file changed, 26 insertions(+), 35 deletions(-)
drivers/staging/rtl8723bs/core/rtw_xmit.c +0 -0
index 34505b35a7f3..4e4a1bed882b 100644
@@ -932,49 +932,40 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
 		/* TODO: fill HT Control Field */
 
 		/* Update Seq Num will be handled by f/w */

drivers/staging/rtl8723bs/core/rtw_xmit.c s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr · line 935

Quoted 10 lines
drivers/staging/rtl8723bs/core/rtw_xmit.c +1 -9
-		{
-			struct sta_info *psta;
-
-			psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
-			if (pattrib->psta != psta)
-				return _FAIL;
-
-			if (!psta)
-				return _FAIL;
+		struct sta_info *psta;

You are now declaring a variable after some statements, this will cause a compiler warning in some cases. Please move this variable declaration up, grouping it together with the other variable declarations.

drivers/staging/rtl8723bs/core/rtw_xmit.c s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr · line 940

Quoted 7 lines
drivers/staging/rtl8723bs/core/rtw_xmit.c +4 -2
-			if (!(psta->state & _FW_LINKED))
-				return _FAIL;
+		psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
+		if (!psta || pattrib->psta != psta || !(psta->state & _FW_LINKED))
+			res = _FAIL;
+			goto exit;

You are both removing an identation level here because you are removing the compound statement which contained the psta declaration as well as refactoring the code.

Please split this into 2 separate commits, 1 where you only drop the extra indentation level (and move the psta declaration up).

And then a separate commit which just the actual code changes.

Your current patch is very hard to review because you are doing 2 things at once.

Also it looks like this patch depends on your previous patch:
"[PATCH] staging: rtl8723bs: core: remove empty else section"

When patches depend on each other please send them together as a single patch series. E.g. for version 2 (v2) of a 3 patch series consisting of the last 3 commits in your local tree use (so the next version of these patches) use:

git format-patch -v2 --cover-letter HEAD~3
$editor v2-0000-cover-letter.patch
<describe series contents + what was changed in the cover-letter>
git send-email v2-00*.patch

Regards,

Hans

Quoted 58 lines
drivers/staging/rtl8723bs/core/rtw_xmit.c +21 -25
-			if (psta) {
-				psta->sta_xmitpriv.txseq_tid[pattrib->priority]++;
-				psta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF;
-				pattrib->seqnum = psta->sta_xmitpriv.txseq_tid[pattrib->priority];
+		psta->sta_xmitpriv.txseq_tid[pattrib->priority]++;
+		psta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF;
+		pattrib->seqnum = psta->sta_xmitpriv.txseq_tid[pattrib->priority];
 
-				SetSeqNum(hdr, pattrib->seqnum);
+		SetSeqNum(hdr, pattrib->seqnum);
 
-				/* check if enable ampdu */
-				if (pattrib->ht_en && psta->htpriv.ampdu_enable)
-					if (psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority))
-						pattrib->ampdu_en = true;
+		/* check if enable ampdu */
+		if (pattrib->ht_en && psta->htpriv.ampdu_enable)
+			if (psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority))
+				pattrib->ampdu_en = true;
 
-				/* re-check if enable ampdu by BA_starting_seqctrl */
-				if (pattrib->ampdu_en == true) {
-					u16 tx_seq;
+		/* re-check if enable ampdu by BA_starting_seqctrl */
+		if (pattrib->ampdu_en == true) {
+			u16 tx_seq;
 
-					tx_seq = psta->BA_starting_seqctrl[pattrib->priority & 0x0f];
+			tx_seq = psta->BA_starting_seqctrl[pattrib->priority & 0x0f];
 
-					/* check BA_starting_seqctrl */
-					if (SN_LESS(pattrib->seqnum, tx_seq)) {
-						pattrib->ampdu_en = false;/* AGG BK */
-					} else if (SN_EQUAL(pattrib->seqnum, tx_seq)) {
-						psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (tx_seq+1)&0xfff;
+			/* check BA_starting_seqctrl */
+			if (SN_LESS(pattrib->seqnum, tx_seq)) {
+				pattrib->ampdu_en = false;/* AGG BK */
+			} else if (SN_EQUAL(pattrib->seqnum, tx_seq)) {
+				psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (tx_seq+1)&0xfff;
 
-						pattrib->ampdu_en = true;/* AGG EN */
-					} else {
-						psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (pattrib->seqnum+1)&0xfff;
-						pattrib->ampdu_en = true;/* AGG EN */
-					}
-				}
+				pattrib->ampdu_en = true;/* AGG EN */
+			} else {
+				psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (pattrib->seqnum+1)&0xfff;
+				pattrib->ampdu_en = true;/* AGG EN */
 			}
 		}
 	}
--

2.32.0

#2 lore raw
Quoted 21 lines · Hans de Goede

Hi,

Quoted 18 lines · Saurav Girepunje

if psta is NULL, function is returning with fail. On next if condition again checking if psta is not a NULL. Remove multiple if condition check.

Function is already using goto exit statement to exit.Replace multiple return with goto exit statement.

---
  drivers/staging/rtl8723bs/core/rtw_xmit.c | 61 ++++++++++-------------
  1 file changed, 26 insertions(+), 35 deletions(-)
drivers/staging/rtl8723bs/core/rtw_xmit.c +0 -0
index 34505b35a7f3..4e4a1bed882b 100644
@@ -932,49 +932,40 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
  		/* TODO: fill HT Control Field */
 
Quoted 17 lines

drivers/staging/rtl8723bs/core/rtw_xmit.c s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr · line 935

Quoted 11 lines
drivers/staging/rtl8723bs/core/rtw_xmit.c +1 -9
  		/* Update Seq Num will be handled by f/w */
-		{
-			struct sta_info *psta;
-
-			psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
-			if (pattrib->psta != psta)
-				return _FAIL;
-
-			if (!psta)
-				return _FAIL;
+		struct sta_info *psta;

You are now declaring a variable after some statements, this will cause a compiler warning in some cases. Please move this variable declaration up, grouping it together with the other variable declarations.

Yes, I will move variable declaration to up.

Quoted 28 lines

drivers/staging/rtl8723bs/core/rtw_xmit.c s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr · line 940

Quoted 7 lines
drivers/staging/rtl8723bs/core/rtw_xmit.c +4 -2
-			if (!(psta->state & _FW_LINKED))
-				return _FAIL;
+		psta = rtw_get_stainfo(&padapter->stapriv, pattrib->ra);
+		if (!psta || pattrib->psta != psta || !(psta->state & _FW_LINKED))
+			res = _FAIL;
+			goto exit;

You are both removing an identation level here because you are removing the compound statement which contained the psta declaration as well as refactoring the code.

Please split this into 2 separate commits, 1 where you only drop the extra indentation level (and move the psta declaration up).

And then a separate commit which just the actual code changes.

Your current patch is very hard to review because you are doing 2 things at once.

Also it looks like this patch depends on your previous patch:
"[PATCH] staging: rtl8723bs: core: remove empty else section"

When patches depend on each other please send them together as a single patch series. E.g. for version 2 (v2) of a 3 patch series consisting of the last 3 commits in your local tree use (so the next version of these patches) use:

Quoted 9 lines

git format-patch -v2 --cover-letter HEAD~3
$editor v2-0000-cover-letter.patch
<describe series contents + what was changed in the cover-letter>
git send-email v2-00*.patch

Regards,

Hans

Sure, I will split this patch and resend all of them as a single patch series including my previous patch.

Quoted 43 lines
Quoted 43 lines
drivers/staging/rtl8723bs/core/rtw_xmit.c +17 -18
-			if (psta) {
-				psta->sta_xmitpriv.txseq_tid[pattrib->priority]++;
-				psta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF;
-				pattrib->seqnum = psta->sta_xmitpriv.txseq_tid[pattrib->priority];
+		psta->sta_xmitpriv.txseq_tid[pattrib->priority]++;
+		psta->sta_xmitpriv.txseq_tid[pattrib->priority] &= 0xFFF;
+		pattrib->seqnum = psta->sta_xmitpriv.txseq_tid[pattrib->priority];
 
-				SetSeqNum(hdr, pattrib->seqnum);
+		SetSeqNum(hdr, pattrib->seqnum);
 
-				/* check if enable ampdu */
-				if (pattrib->ht_en && psta->htpriv.ampdu_enable)
-					if (psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority))
-						pattrib->ampdu_en = true;
+		/* check if enable ampdu */
+		if (pattrib->ht_en && psta->htpriv.ampdu_enable)
+			if (psta->htpriv.agg_enable_bitmap & BIT(pattrib->priority))
+				pattrib->ampdu_en = true;
 
-				/* re-check if enable ampdu by BA_starting_seqctrl */
-				if (pattrib->ampdu_en == true) {
-					u16 tx_seq;
+		/* re-check if enable ampdu by BA_starting_seqctrl */
+		if (pattrib->ampdu_en == true) {
+			u16 tx_seq;
 
-					tx_seq = psta->BA_starting_seqctrl[pattrib->priority & 0x0f];
+			tx_seq = psta->BA_starting_seqctrl[pattrib->priority & 0x0f];
 
-					/* check BA_starting_seqctrl */
-					if (SN_LESS(pattrib->seqnum, tx_seq)) {
-						pattrib->ampdu_en = false;/* AGG BK */
-					} else if (SN_EQUAL(pattrib->seqnum, tx_seq)) {
-						psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (tx_seq+1)&0xfff;
+			/* check BA_starting_seqctrl */
+			if (SN_LESS(pattrib->seqnum, tx_seq)) {
+				pattrib->ampdu_en = false;/* AGG BK */
+			} else if (SN_EQUAL(pattrib->seqnum, tx_seq)) {
+				psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (tx_seq+1)&0xfff;
 
Quoted 17 lines
Quoted 14 lines
drivers/staging/rtl8723bs/core/rtw_xmit.c +4 -7
-						pattrib->ampdu_en = true;/* AGG EN */
-					} else {
-						psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (pattrib->seqnum+1)&0xfff;
-						pattrib->ampdu_en = true;/* AGG EN */
-					}
-				}
+				pattrib->ampdu_en = true;/* AGG EN */
+			} else {
+				psta->BA_starting_seqctrl[pattrib->priority & 0x0f] = (pattrib->seqnum+1)&0xfff;
+				pattrib->ampdu_en = true;/* AGG EN */
  			}
  		}
  	}
--
Quoted 2 lines

2.32.0

Thanks Hans for review.

Regards,
Saurav

#3 lore raw
In reply to Saurav Girepunje

You didn't compile test the patch.

Quoted 3 lines · Saurav Girepunje

if psta is NULL, function is returning with fail. On next if condition again checking if psta is not a NULL. Remove multiple if condition check.

I don't think this is an accurate description of what the patch does.

Quoted 2 lines

Function is already using goto exit statement to exit.Replace multiple return with goto exit statement.

No. Do nothing labels only hurt readability and introduce "forgot to set the error code bugs."

regards,
dan carpenter