Handle update hardware queues and queue freeze more carefully
Subsystems (2)
v5 cover Handle update hardware queues and queue freeze more carefully
Hi,
I've dropped all non FC patches as they were bogus. I've retested this version with all combinations and all looks good now. Also I gave nvme-tcp a spin and again all is good.
Daniel
v1:
- https://lore.kernel.org/linux-nvme/[email protected]/
v2:
- https://lore.kernel.org/linux-nvme/[email protected]/
- reviewed tags collected
- added 'update hardware queues' for all transport
- added fix for fc hanger in nvme_wait_freeze_timeout
v3:
- https://lore.kernel.org/linux-nvme/[email protected]/
- dropped 'nvme-fc: Freeze queues before destroying them'
- added James' two patches
v4:
- https://lore.kernel.org/linux-nvme/[email protected]/
- added 'nvme-*: Unfreeze queues on reconnect'
- added Hannes' reviewed tags
v5:
- dropped non nvme-fc patches
- updated 'nvme-fc: fix controller reset hang during traffic'
Daniel Wagner (1):
nvme-fc: Wait with a timeout for queue to freeze
James Smart (2):
nvme-fc: avoid race between time out and tear down
nvme-fc: fix controller reset hang during traffic
drivers/nvme/host/fc.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)
Signature · 1 line
2.29.2
PATCH v5 1/3 nvme-fc: Wait with a timeout for queue to freeze
Do not wait indifinitly for all queues to freeze. Instead use a timeout and abort the operation if we get stuck.
--- drivers/nvme/host/fc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/nvme/host/fc.c +8 -1
@@ -2963,7 +2963,14 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)dev_info (ctrl->ctrl.device,"reconnect: revising io queue count from %d to %d\n" , prior_ioq_cnt, nr_io_queues); -nvme_wait_freeze (&ctrl->ctrl); +if (!nvme_wait_freeze_timeout (&ctrl->ctrl,NVME_IO_TIMEOUT )) { +/* +* If we timed out waiting for freeze we are likely to +* be stuck. Fail the controller initialization just +* to be safe. +*/ +return -ENODEV ; + }blk_mq_update_nr_hw_queues (&ctrl->tag_set, nr_io_queues);nvme_unfreeze (&ctrl->ctrl); }
Signature · 1 line
2.29.2
PATCH v5 2/3 nvme-fc: avoid race between time out and tear down
In reply to Daniel WagnerFrom: James Smart <[email protected]>
To avoid race between time out and tear down, in tear down process, first we quiesce the queue, and then delete the timer and cancel the time out work for the queue.
This patch merges the admin and io sync ops into the queue teardown logic as shown in the RDMA patch 3017013dcc "nvme-rdma: avoid race between time out and tear down". There is no teardown_lock in nvme-fc.
--- drivers/nvme/host/fc.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/nvme/host/fc.c +2 -0
@@ -2487,6 +2487,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues)*/ if (ctrl->ctrl.queue_count >1 ) {nvme_stop_queues (&ctrl->ctrl); +nvme_sync_io_queues (&ctrl->ctrl);blk_mq_tagset_busy_iter (&ctrl->tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl);blk_mq_tagset_wait_completed_request (&ctrl->tag_set);
@@ -2510,6 +2511,7 @@ __nvme_fc_abort_outstanding_ios(struct nvme_fc_ctrl *ctrl, bool start_queues)* clean up the admin queue. Same thing as above. */ blk_mq_quiesce_queue (ctrl->ctrl.admin_q); +blk_sync_queue (ctrl->ctrl.admin_q);blk_mq_tagset_busy_iter (&ctrl->admin_tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl);blk_mq_tagset_wait_completed_request (&ctrl->admin_tag_set);
Signature · 1 line
2.29.2
PATCH v5 3/3 nvme-fc: fix controller reset hang during traffic
In reply to Daniel WagnerFrom: James Smart <[email protected]>
commit fe35ec58f0d3 ("block: update hctx map when use multiple maps") exposed an issue where we may hang trying to wait for queue freeze during I/O. We call blk_mq_update_nr_hw_queues which may attempt to freeze the queue. However we never started queue freeze when starting the reset, which means that we have inflight pending requests that entered the queue that we will not complete once the queue is quiesced.
So start a freeze before we quiesce the queue, and unfreeze the queue after we successfully connected the I/O queues (the unfreeze is already present in the code). blk_mq_update_nr_hw_queues will be called only after we are sure that the queue was already frozen.
This follows to how the pci driver handles resets.
This patch added logic introduced in commit 9f98772ba307 "nvme-rdma: fix controller reset hang during traffic".
--- drivers/nvme/host/fc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/nvme/host/fc.c +5 -1
@@ -2974,9 +2974,10 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)return -ENODEV ; }blk_mq_update_nr_hw_queues (&ctrl->tag_set, nr_io_queues); -nvme_unfreeze (&ctrl->ctrl); } +nvme_unfreeze (&ctrl->ctrl); +return 0 ; out_delete_hw_queues:
@@ -3215,6 +3216,9 @@ nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl) ctrl->iocnt =0 ;spin_unlock_irqrestore (&ctrl->lock, flags); +if (ctrl->ctrl.queue_count >1 ) +nvme_start_freeze (&ctrl->ctrl); +__nvme_fc_abort_outstanding_ios (ctrl, false);/* kill the aens as they are a separate path */
Signature · 1 line
2.29.2
Re: [PATCH v5 3/3] nvme-fc: fix controller reset hang during traffic
Quoted 45 lines · Daniel Wagner
From: James Smart <[email protected]>
commit
fe35ec58f0d3("block: update hctx map when use multiple maps") exposed an issue where we may hang trying to wait for queue freeze during I/O. We callblk_mq_update_nr_hw_queueswhich may attempt to freeze the queue. However we never started queue freeze when starting the reset, which means that we have inflight pending requests that entered the queue that we will not complete once the queue is quiesced.So start a freeze before we quiesce the queue, and unfreeze the queue after we successfully connected the I/O queues (the unfreeze is already present in the code).
blk_mq_update_nr_hw_queueswill be called only after we are sure that the queue was already frozen.This follows to how the pci driver handles resets.
This patch added logic introduced in commit
9f98772ba307"nvme-rdma: fix controller reset hang during traffic".Signed-off-by James Smart <[email protected]>CC Sagi Grimberg <[email protected]>Tested-by Daniel Wagner <[email protected]>Reviewed-by Daniel Wagner <[email protected]>--- drivers/nvme/host/fc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/nvme/host/fc.c +2
-1@@ -2974,9 +2974,10 @@ nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl)return -ENODEV ; }blk_mq_update_nr_hw_queues (&ctrl->tag_set, nr_io_queues); -nvme_unfreeze (&ctrl->ctrl); } +nvme_unfreeze (&ctrl->ctrl); +return 0 ; out_delete_hw_queues:
drivers/nvme/host/fc.c nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl) · line 3224
Quoted 9 lines
drivers/nvme/host/fc.c +3
-0@@ -3215,6 +3216,9 @@ nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl) ctrl->iocnt =0 ;spin_unlock_irqrestore (&ctrl->lock, flags); +if (ctrl->ctrl.queue_count >1 ) +nvme_start_freeze (&ctrl->ctrl); +__nvme_fc_abort_outstanding_ios (ctrl, false);/* kill the aens as they are a separate path */
Cheers,
Hannes
Signature · 4 lines
Dr. Hannes Reinecke Kernel Storage Architect [email protected] +49 911 74053 688 SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg HRB 36809 (AG Nürnberg), GF: Felix Imendörffer
Quoted 3 lines · Daniel Wagner
I've dropped all non FC patches as they were bogus. I've retested this version with all combinations and all looks good now. Also I gave nvme-tcp a spin and again all is good.
I forgot to mention I also dropped the first three patches from v4. Which seems to break her testing again.
Wendy reported all her tests pass with Ming's V7 of 'blk-mq: fix blk_mq_alloc_request_hctx' and this series *only* if 'nvme-fc: Update hardware queues before using them' from previous version is also used.
After starring at it once more, I think I finally understood the problem. So when we do
ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1);
if (ret)
goto out_free_io_queues;
ret = nvme_fc_connect_io_queues(ctrl, ctrl->ctrl.sqsize + 1);
if (ret)
goto out_delete_hw_queues;and the number of queues has changed, the connect call will fail:
nvme2: NVME-FC{2}: create association : host wwpn 0x100000109b5a4dfa rport wwpn 0x50050768101935e5: NQN "nqn.1986-03.com.ibm:nvme:2145.0000020420006CEA"
nvme2: Connect command failed, error wo/DNR bit: -16389
and we stop the current reconnect attempt and reschedule a new reconnect attempt:
nvme2: NVME-FC{2}: reset: Reconnect attempt failed (-5)
nvme2: NVME-FC{2}: Reconnect attempt in 2 seconds
Then we try to do the same thing again which fails, thus we never make progress.
So clearly we need to update number of queues at one point. What would be the right thing to do here? As I understood we need to be careful with frozen requests. Can we abort them (is this even possible in this state?) and requeue them before we update the queue numbers?
Daniel
Quoted 7 lines · Daniel Wagner
Then we try to do the same thing again which fails, thus we never make progress.
So clearly we need to update number of queues at one point. What would be the right thing to do here? As I understood we need to be careful with frozen requests. Can we abort them (is this even possible in this state?) and requeue them before we update the queue numbers?
After starring a bit longer at the reset path, I think there is no pending request in any queue. nvme_fc_delete_association() calls __nvme_fc_abort_outstanding_ios() which makes sure all queues are drained (usage counter is 0). Also it clears the NVME_FC_Q_LIVE bit, which prevents further request added to queues.
I start wonder why we have to do the nvme_start_freeze() in the first place and why we want to wait for the freeze. 88e837ed0f1f ("nvme-fc:
wait for queues to freeze before calling update_hr_hw_queues") doesn't really tell why we need wait for the freeze.
Given we know the usage counter of the queues is 0, I think we are safe to move the blk_mq_update_nr_hw_queues() before the start queue code. Also note nvme_fc_create_hw_io_queues() calls blk_mq_freeze_queue() but it wont block as we are sure there is no pending request.
Quoted 9 lines · Daniel Wagner
Quoted 7 lines · Daniel Wagner
Then we try to do the same thing again which fails, thus we never make progress.
So clearly we need to update number of queues at one point. What would be the right thing to do here? As I understood we need to be careful with frozen requests. Can we abort them (is this even possible in this state?) and requeue them before we update the queue numbers?
Quoted 5 lines
After starring a bit longer at the reset path, I think there is no pending request in any queue.
nvme_fc_delete_association()calls__nvme_fc_abort_outstanding_ios()which makes sure all queues are drained (usage counter is 0). Also it clears theNVME_FC_Q_LIVEbit, which prevents further request added to queues.
yes, as long as we haven't attempted to create the io queues via nvme_fc_connect_io_queues(), nothing should be successful queueing and running down the hctx to start the io. nvme_fc_connect_io_queues() will use the queue for the Connect cmd, which is probably what generated the prior -16389 error.
Which says:"nvme-fc: Update hardware queues before using them" should be good to use.
Quoted 5 lines
I start wonder why we have to do the
nvme_start_freeze()in the first place and why we want to wait for the freeze.88e837ed0f1f("nvme-fc:
wait for queues to freeze before callingupdate_hr_hw_queues") doesn't really tell why we need wait for the freeze.
I think that is probably going to be true as well - no need to freeze/unfreeze around this path. This was also a rather late add (last oct), so we had been running without the freezes for a long time, granted few devices change their queue counts.
I'll have to see if I can find what prompted the change. At first blush, I'm fine reverting it.
Quoted 6 lines
Given we know the usage counter of the queues is 0, I think we are safe to move the
blk_mq_update_nr_hw_queues()before the start queue code. Also notenvme_fc_create_hw_io_queues()callsblk_mq_freeze_queue()but it wont block as we are sure there is no pending request.
Agree.
-- james
Quoted 6 lines
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Christoph Hellwig
AppliedThanks,
applied to nvme-5.15.
Hi Christoph,
Quoted 1 line · Christoph Hellwig
applied to nvme-5.15.
Could you drop these patches again? James just sent me a new version of the series which addresses the points we discussed in this thread. They look good to me but I'd like to give them a spin and will post them shortly. Also James is giving them a test run.
Daniel
Quoted 9 lines · Daniel Wagner
Hi Christoph,
Quoted 1 line · Christoph Hellwig
applied to nvme-5.15.
Could you drop these patches again? James just sent me a new version of the series which addresses the points we discussed in this thread. They look good to me but I'd like to give them a spin and will post them shortly. Also James is giving them a test run.
Ok.