Skip to contentSkip to conversation

wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h

PATCH Superseded Bitterblue Smith 3 participants 8 messages Nov 29, 2022 – Dec 1, 2022 RTL8XXXU wireless driver (rtl8xxxu)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/3 wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h

This struct is used to access a sequence of bytes received from the wifi chip. It must not have any padding bytes between the members.

This doesn't change anything on my system, possibly because currently none of the members need more than byte alignment.

Fixes b2b43b7837ba ("rtl8xxxu: Initial functionality to handle C2H events for 8723bu")

---
v3:
- No change.

v2:
- Patch is new in v2.

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +1 -1
index 136992f0200c..d26df4095da0 100644
@@ -1240,7 +1240,7 @@ struct rtl8723bu_c2h {
 			u8 bw;
 		} __packed ra_report;
 	};
-};
+} __packed;
 
 struct rtl8xxxu_fileops;
 
Signature · 1 line
2.38.0
#1 lore raw

PATCH v3 2/3 wifi: rtl8xxxu: Fix the channel width reporting

The gen 2 chips RTL8192EU and RTL8188FU periodically send the driver reports about the TX rate, and the driver passes these reports to sta_statistics. The reports from RTL8192EU may or may not include the channel width. The reports from RTL8188FU do not include it.

Only access the c2h->ra_report.bw field if the report (skb) is big enough.

The other problem fixed here is that the code was actually never changing the channel width initially reported by rtl8xxxu_bss_info_changed because the value of RATE_INFO_BW_20 is 0.

Fixes 0985d3a410ac ("rtl8xxxu: Feed current txrate information for mac80211")

---
v3:
- Don't assume bw will always be 1 byte.

v2:
- Eliminate the magic numbers.

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +8 -3
index 28f136064297..9799bc5ed60a 100644
@@ -5569,7 +5569,6 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 			rarpt->txrate.flags = 0;
 			rate = c2h->ra_report.rate;
 			sgi = c2h->ra_report.sgi;
-			bw = c2h->ra_report.bw;
 
 			if (rate < DESC_RATE_MCS0) {
 				rarpt->txrate.legacy =
@@ -5586,8 +5585,14 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 						RATE_INFO_FLAGS_SHORT_GI;
 				}
 
-				if (bw == RATE_INFO_BW_20)
-					rarpt->txrate.bw |= RATE_INFO_BW_20;
+				if (skb->len >= offsetof(typeof(*c2h), ra_report.bw) +
+						sizeof(c2h->ra_report.bw)) {
+					if (c2h->ra_report.bw == RTL8XXXU_CHANNEL_WIDTH_40)
+						bw = RATE_INFO_BW_40;
+					else
+						bw = RATE_INFO_BW_20;
+					rarpt->txrate.bw = bw;
+				}
 			}
 			bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
 			rarpt->bit_rate = bit_rate;
Signature · 1 line
2.38.0
#2 lore raw

RE: [PATCH v3 2/3] wifi: rtl8xxxu: Fix the channel width reporting

Quoted 47 lines

-----Original Message-----
From: Bitterblue Smith <[email protected]>
Sent: Wednesday, November 30, 2022 3:06 AM
To: [email protected]
Cc: Jes Sorensen <[email protected]>; Ping-Ke Shih <[email protected]>
Subject: [PATCH v3 2/3] wifi: rtl8xxxu: Fix the channel width reporting

The gen 2 chips RTL8192EU and RTL8188FU periodically send the driver reports about the TX rate, and the driver passes these reports to sta_statistics. The reports from RTL8192EU may or may not include the channel width. The reports from RTL8188FU do not include it.

Only access the c2h->ra_report.bw field if the report (skb) is big enough.

The other problem fixed here is that the code was actually never changing the channel width initially reported by rtl8xxxu_bss_info_changed because the value of RATE_INFO_BW_20 is 0.

Fixes 0985d3a410ac ("rtl8xxxu: Feed current txrate information for mac80211")

---
v3:
- Don't assume bw will always be 1 byte.

v2:
- Eliminate the magic numbers.

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +0 -1
index 28f136064297..9799bc5ed60a 100644
@@ -5569,7 +5569,6 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 			rarpt->txrate.flags = 0;
 			rate = c2h->ra_report.rate;
 			sgi = c2h->ra_report.sgi;
-			bw = c2h->ra_report.bw;
 
 			if (rate < DESC_RATE_MCS0) {
 				rarpt->txrate.legacy =

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c static void rtl8xxxu_c2hcmd_callback(struct work_struct *work) · line 5589

Quoted 7 lines
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +2 -2
@@ -5586,8 +5585,14 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 						RATE_INFO_FLAGS_SHORT_GI;
 				}
 
-				if (bw == RATE_INFO_BW_20)
-					rarpt->txrate.bw |= RATE_INFO_BW_20;
+				if (skb->len >= offsetof(typeof(*c2h), ra_report.bw) +
+						sizeof(c2h->ra_report.bw)) {

Today, I look up if we have a better choice, and offsetofend() can make thing simple.

if (skb->len >= offsetofend(typeof(*c2h), ra_report.bw))

Sorry for the late.

Quoted 13 lines
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +6 -1
+					if (c2h->ra_report.bw == RTL8XXXU_CHANNEL_WIDTH_40)
+						bw = RATE_INFO_BW_40;
+					else
+						bw = RATE_INFO_BW_20;
+					rarpt->txrate.bw = bw;
+				}
 			}
 			bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
 			rarpt->bit_rate = bit_rate;
--

2.38.0

------Please consider the environment before printing this e-mail.

#3 lore raw

Re: [PATCH v3 2/3] wifi: rtl8xxxu: Fix the channel width reporting

Quoted 57 lines · Ping-Ke Shih
Quoted 47 lines

-----Original Message-----
From: Bitterblue Smith <[email protected]>
Sent: Wednesday, November 30, 2022 3:06 AM
To: [email protected]
Cc: Jes Sorensen <[email protected]>; Ping-Ke Shih <[email protected]>
Subject: [PATCH v3 2/3] wifi: rtl8xxxu: Fix the channel width reporting

The gen 2 chips RTL8192EU and RTL8188FU periodically send the driver reports about the TX rate, and the driver passes these reports to sta_statistics. The reports from RTL8192EU may or may not include the channel width. The reports from RTL8188FU do not include it.

Only access the c2h->ra_report.bw field if the report (skb) is big enough.

The other problem fixed here is that the code was actually never changing the channel width initially reported by rtl8xxxu_bss_info_changed because the value of RATE_INFO_BW_20 is 0.

Fixes 0985d3a410ac ("rtl8xxxu: Feed current txrate information for mac80211")

---
v3:
- Don't assume bw will always be 1 byte.

v2:
- Eliminate the magic numbers.

---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +0 -1
index 28f136064297..9799bc5ed60a 100644
@@ -5569,7 +5569,6 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 			rarpt->txrate.flags = 0;
 			rate = c2h->ra_report.rate;
 			sgi = c2h->ra_report.sgi;
-			bw = c2h->ra_report.bw;
 
 			if (rate < DESC_RATE_MCS0) {
 				rarpt->txrate.legacy =

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c static void rtl8xxxu_c2hcmd_callback(struct work_struct *work) · line 5589

Quoted 7 lines
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +2 -2
@@ -5586,8 +5585,14 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 						RATE_INFO_FLAGS_SHORT_GI;
 				}
 
-				if (bw == RATE_INFO_BW_20)
-					rarpt->txrate.bw |= RATE_INFO_BW_20;
+				if (skb->len >= offsetof(typeof(*c2h), ra_report.bw) +
+						sizeof(c2h->ra_report.bw)) {

Today, I look up if we have a better choice, and offsetofend() can make thing simple.

Quoted 4 lines

if (skb->len >= offsetofend(typeof(*c2h), ra_report.bw))

Sorry for the late.

Even better. Thank you.

#4 lore raw

PATCH v3 3/3 wifi: rtl8xxxu: Introduce rtl8xxxu_update_ra_report

In reply to Bitterblue Smith

The ra_report struct is used for reporting the TX rate via sta_statistics. The code which fills it out is duplicated in two places, and the RTL8188EU will need it in a third place. Move this code into a new function rtl8xxxu_update_ra_report.

---
v3:
- No change.

v2:
- Compare against DESC_RATE_54M instead of DESC_RATE_MCS0.

---
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 107 ++++++++----------
 1 file changed, 46 insertions(+), 61 deletions(-)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +46 -61
index 9799bc5ed60a..7580ec8a5562 100644
@@ -4598,6 +4598,32 @@ static void rtl8xxxu_set_aifs(struct rtl8xxxu_priv *priv, u8 slot_time)
 	}
 }
 
+static void rtl8xxxu_update_ra_report(struct rtl8xxxu_ra_report *rarpt,
+				      u8 rate, u8 sgi, u8 bw)
+{
+	u8 mcs, nss;
+
+	rarpt->txrate.flags = 0;
+
+	if (rate <= DESC_RATE_54M) {
+		rarpt->txrate.legacy = rtl8xxxu_legacy_ratetable[rate].bitrate;
+	} else {
+		rtl8xxxu_desc_to_mcsrate(rate, &mcs, &nss);
+		rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
+
+		rarpt->txrate.mcs = mcs;
+		rarpt->txrate.nss = nss;
+
+		if (sgi)
+			rarpt->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+		rarpt->txrate.bw = bw;
+	}
+
+	rarpt->bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
+	rarpt->desc_rate = rate;
+}
+
 static void
 rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			  struct ieee80211_bss_conf *bss_conf, u64 changed)
@@ -4620,9 +4646,7 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			u32 ramask;
 			int sgi = 0;
 			u8 highest_rate;
-			u8 mcs = 0, nss = 0;
-			u32 bit_rate;
-
+			u8 bw;
 
 			rcu_read_lock();
 			sta = ieee80211_find_sta(vif, bss_conf->bssid);
@@ -4647,37 +4671,19 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 				sgi = 1;
 
 			highest_rate = fls(ramask) - 1;
-			if (highest_rate < DESC_RATE_MCS0) {
-				rarpt->txrate.legacy =
-				rtl8xxxu_legacy_ratetable[highest_rate].bitrate;
-			} else {
-				rtl8xxxu_desc_to_mcsrate(highest_rate,
-							 &mcs, &nss);
-				rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
-
-				rarpt->txrate.mcs = mcs;
-				rarpt->txrate.nss = nss;
-
-				if (sgi) {
-					rarpt->txrate.flags |=
-						RATE_INFO_FLAGS_SHORT_GI;
-				}
-
-				if (rtl8xxxu_ht40_2g &&
-				    (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
-					rarpt->txrate.bw = RATE_INFO_BW_40;
-				else
-					rarpt->txrate.bw = RATE_INFO_BW_20;
-			}
+			if (rtl8xxxu_ht40_2g &&
+			    (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+				bw = RATE_INFO_BW_40;
+			else
+				bw = RATE_INFO_BW_20;
 			rcu_read_unlock();
-			bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
-			rarpt->bit_rate = bit_rate;
-			rarpt->desc_rate = highest_rate;
+
+			rtl8xxxu_update_ra_report(rarpt, highest_rate, sgi, bw);
 
 			priv->vif = vif;
 			priv->rssi_level = RTL8XXXU_RATR_STA_INIT;
 
-			priv->fops->update_rate_mask(priv, ramask, 0, sgi, rarpt->txrate.bw == RATE_INFO_BW_40);
+			priv->fops->update_rate_mask(priv, ramask, 0, sgi, bw == RATE_INFO_BW_40);
 
 			rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff);
 
@@ -5538,9 +5544,7 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 	u8 bt_info = 0;
 	struct rtl8xxxu_btcoex *btcoex;
 	struct rtl8xxxu_ra_report *rarpt;
-	u8 rate, sgi, bw;
-	u32 bit_rate;
-	u8 mcs = 0, nss = 0;
+	u8 bw;
 
 	priv = container_of(work, struct rtl8xxxu_priv, c2hcmd_work);
 	btcoex = &priv->bt_coex;
@@ -5566,37 +5570,18 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 			rtl8723bu_handle_bt_info(priv);
 			break;
 		case C2H_8723B_RA_REPORT:
-			rarpt->txrate.flags = 0;
-			rate = c2h->ra_report.rate;
-			sgi = c2h->ra_report.sgi;
-
-			if (rate < DESC_RATE_MCS0) {
-				rarpt->txrate.legacy =
-					rtl8xxxu_legacy_ratetable[rate].bitrate;
-			} else {
-				rtl8xxxu_desc_to_mcsrate(rate, &mcs, &nss);
-				rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
+			bw = rarpt->txrate.bw;
 
-				rarpt->txrate.mcs = mcs;
-				rarpt->txrate.nss = nss;
-
-				if (sgi) {
-					rarpt->txrate.flags |=
-						RATE_INFO_FLAGS_SHORT_GI;
-				}
-
-				if (skb->len >= offsetof(typeof(*c2h), ra_report.bw) +
-						sizeof(c2h->ra_report.bw)) {
-					if (c2h->ra_report.bw == RTL8XXXU_CHANNEL_WIDTH_40)
-						bw = RATE_INFO_BW_40;
-					else
-						bw = RATE_INFO_BW_20;
-					rarpt->txrate.bw = bw;
-				}
+			if (skb->len >= offsetof(typeof(*c2h), ra_report.bw) +
+					sizeof(c2h->ra_report.bw)) {
+				if (c2h->ra_report.bw == RTL8XXXU_CHANNEL_WIDTH_40)
+					bw = RATE_INFO_BW_40;
+				else
+					bw = RATE_INFO_BW_20;
 			}
-			bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
-			rarpt->bit_rate = bit_rate;
-			rarpt->desc_rate = rate;
+
+			rtl8xxxu_update_ra_report(rarpt, c2h->ra_report.rate,
+						  c2h->ra_report.sgi, bw);
 			break;
 		default:
 			break;
Signature · 1 line
2.38.0
#5 lore raw

Re: [PATCH v3 3/3] wifi: rtl8xxxu: Introduce rtl8xxxu_update_ra_report

Hi,
I am trying to merge this patch into the linux source tree (Mr. Torvalds' updated source tree) and find a confliection in patch 3/3. I think you should move the rcu_read_unlock() that originally located in line 4657 to line 4682(right after the if-else section) to make this patch work normally.

Jun ASAKA.

#6 lore raw

Re: [PATCH v3 3/3] wifi: rtl8xxxu: Introduce rtl8xxxu_update_ra_report

Quoted 6 lines · JunASAKA

Hi,
I am trying to merge this patch into the linux source tree (Mr. Torvalds' updated source tree) and find a confliection in patch 3/3. I think you should move the rcu_read_unlock() that originally located in line 4657 to line 4682(right after the if-else section) to make this patch work normally.

Jun ASAKA.

This patch set is meant to be applied on top of the wireless-next tree:
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git
That tree contains a commit which is not yet found in other trees:
7927afb5e27b ("wifi: rtl8xxxu: Fix use after rcu_read_unlock in rtl8xxxu_bss_info_changed")

#7 lore raw

Re: [PATCH v3 3/3] wifi: rtl8xxxu: Introduce rtl8xxxu_update_ra_report

Quoted 11 lines · Bitterblue Smith
Quoted 6 lines · JunASAKA

Hi,
I am trying to merge this patch into the linux source tree (Mr. Torvalds' updated source tree) and find a confliection in patch 3/3. I think you should move the rcu_read_unlock() that originally located in line 4657 to line 4682(right after the if-else section) to make this patch work normally.

Jun ASAKA.

This patch set is meant to be applied on top of the wireless-next tree:
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git
That tree contains a commit which is not yet found in other trees:
7927afb5e27b ("wifi: rtl8xxxu: Fix use after rcu_read_unlock in rtl8xxxu_bss_info_changed")

Oh I see, sorry for my ignorant.

Jun ASAKA.