x86: perf: insn: Tweak opcode map for Intel CET instructions
PATCH 1/1 x86: perf: insn: Tweak opcode map for Intel CET instructions
Intel CET instructions are not described in the Intel SDM. When trying to get the instruction length, the following instructions get wrong (missing ModR/M byte).
RDSSPD r32
RSDDPQ r64
ENDBR32
ENDBR64
WRSSD r/m32, r32
WRSSQ r/m64, r64
RDSSPD/Q and ENDBR32/64 use the same opcode (f3 0f 1e) slot, which is described in SDM as Reserved-NOP with no encoding characters, and got an empty slot in the opcode map. WRSSD/Q (0f 38 f6) also got an empty slot.
--- arch/x86/lib/x86-opcode-map.txt | 4 ++-- tools/arch/x86/lib/x86-opcode-map.txt | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
arch/x86/lib/x86-opcode-map.txt +2 -2
@@ -366,7 +366,7 @@ AVXcode: 1 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv 1c: Grp20 (1A),(1C) 1d: -1e: +1e: NOP Gy,Gy 1f: NOP Ev # 0x0f 0x20-0x2f 20: MOV Rd,Cd
@@ -804,7 +804,7 @@ f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) f3: Grp17 (1A) f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) +f6: NOP Ey,Gy | ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) f9: MOVDIRI My,Gy
tools/arch/x86/lib/x86-opcode-map.txt +2 -2
@@ -366,7 +366,7 @@ AVXcode: 1 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv 1c: Grp20 (1A),(1C) 1d: -1e: +1e: NOP Gy,Gy 1f: NOP Ev # 0x0f 0x20-0x2f 20: MOV Rd,Cd
@@ -804,7 +804,7 @@ f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) f3: Grp17 (1A) f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) +f6: NOP Ey,Gy | ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) f9: MOVDIRI My,Gy
Signature · 1 line
2.25.1
Quoted 11 lines · Mingbo Zhang
Intel CET instructions are not described in the Intel SDM. When trying to get the instruction length, the following instructions get wrong (missing ModR/M byte).
RDSSPD r32
RSDDPQ r64
ENDBR32
ENDBR64
WRSSD r/m32, r32
WRSSQ r/m64, r64
Quoted 3 lines
RDSSPD/Q and ENDBR32/64 use the same opcode (f3 0f 1e) slot, which is described in SDM as Reserved-NOP with no encoding characters, and got an empty slot in the opcode map. WRSSD/Q (0f 38 f6) also got an empty slot.
We have patches for that:
https://lore.kernel.org/lkml/[email protected]/
But they have not yet been applied. Arnaldo, could you take them?
Quoted 16 lines · Adrian Hunter
Quoted 11 lines · Mingbo Zhang
Intel CET instructions are not described in the Intel SDM. When trying to get the instruction length, the following instructions get wrong (missing ModR/M byte).
RDSSPD r32
RSDDPQ r64
ENDBR32
ENDBR64
WRSSD r/m32, r32
WRSSQ r/m64, r64Quoted 3 lines
RDSSPD/Q and ENDBR32/64 use the same opcode (f3 0f 1e) slot, which is described in SDM as Reserved-NOP with no encoding characters, and got an empty slot in the opcode map. WRSSD/Q (0f 38 f6) also got an empty slot.
Quoted 6 lines
We have patches for that:
https://lore.kernel.org/lkml/[email protected]/But they have not yet been applied. Arnaldo, could you take them?
For reference:
Subject: [PATCH 0/2] Introduce Control-flow Enforcement opcodes
Date: Tue, 4 Feb 2020 09:14:23 -0800
Message-ID: <[email protected]> (raw)
Control-flow Enforcement (CET) introduces 10 new instructions [1]. Add them to the opcode map. This series has been separated from the CET patches [2] for ease of review.
[1] Detailed information on CET can be found in "Intel 64 and IA-32
Architectures Software Developer's Manual":
https://software.intel.com/en-us/download/intel-64-and-ia-32-
architectures-sdm-combined-volumes-1-2a-2b-2c-2d-3a-3b-3c-3d-and-4[2] CET patches:
https://lkml.kernel.org/r/[email protected]/ https://lkml.kernel.org/r/[email protected]/
Adrian Hunter (1):
x86/insn: perf tools: Add CET instructions to the new instructions
test
Yu-cheng Yu (1):
x86/insn: Add Control-flow Enforcement (CET) instructions to the
opcode map
arch/x86/lib/x86-opcode-map.txt | 17 +- tools/arch/x86/lib/x86-opcode-map.txt | 17 +- tools/perf/arch/x86/tests/insn-x86-dat-32.c | 112 +++++++++ tools/perf/arch/x86/tests/insn-x86-dat-64.c | 196 +++++++++++++++ tools/perf/arch/x86/tests/insn-x86-dat-src.c | 236 +++++++++++++++++++ 5 files changed, 566 insertions(+), 12 deletions(-)
Quoted 16 lines · Adrian Hunter
Quoted 11 lines · Mingbo Zhang
Intel CET instructions are not described in the Intel SDM. When trying to get the instruction length, the following instructions get wrong (missing ModR/M byte).
RDSSPD r32
RSDDPQ r64
ENDBR32
ENDBR64
WRSSD r/m32, r32
WRSSQ r/m64, r64Quoted 3 lines
RDSSPD/Q and ENDBR32/64 use the same opcode (f3 0f 1e) slot, which is described in SDM as Reserved-NOP with no encoding characters, and got an empty slot in the opcode map. WRSSD/Q (0f 38 f6) also got an empty slot.
Quoted 6 lines
We have patches for that:
https://lore.kernel.org/lkml/[email protected]/But they have not yet been applied. Arnaldo, could you take them?
Any takers?
Quoted 17 lines · Adrian Hunter
Quoted 16 lines · Adrian Hunter
Quoted 14 lines · Mingbo Zhang
Intel CET instructions are not described in the Intel SDM. When trying to get the instruction length, the following instructions get wrong (missing ModR/M byte).
RDSSPD r32
RSDDPQ r64
ENDBR32
ENDBR64
WRSSD r/m32, r32
WRSSQ r/m64, r64RDSSPD/Q and ENDBR32/64 use the same opcode (f3 0f 1e) slot, which is described in SDM as Reserved-NOP with no encoding characters, and got an empty slot in the opcode map. WRSSD/Q (0f 38 f6) also got an empty slot.
Quoted 9 lines
Quoted 6 lines
We have patches for that:
https://lore.kernel.org/lkml/[email protected]/But they have not yet been applied. Arnaldo, could you take them?
Any takers?
:-)
Hi,
Quoted 11 lines · On Mon, 2 Mar 2020 23:50:30 -0500 Mingbo Zhang <[email protected]> wrote:
Intel CET instructions are not described in the Intel SDM. When trying to get the instruction length, the following instructions get wrong (missing ModR/M byte).
RDSSPD r32
RSDDPQ r64
ENDBR32
ENDBR64
WRSSD r/m32, r32
WRSSQ r/m64, r64
Quoted 4 lines
RDSSPD/Q and ENDBR32/64 use the same opcode (f3 0f 1e) slot, which is described in SDM as Reserved-NOP with no encoding characters, and got an empty slot in the opcode map. WRSSD/Q (0f 38 f6) also got an empty slot.
This looks good to me. BTW, wouldn't we need to add decode test cases to perf?
Thank you,
Quoted 53 lines
Signed-off-by Mingbo Zhang <[email protected]>--- arch/x86/lib/x86-opcode-map.txt | 4 ++-- tools/arch/x86/lib/x86-opcode-map.txt | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)arch/x86/lib/x86-opcode-map.txt +2
-2@@ -366,7 +366,7 @@ AVXcode: 1 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv 1c: Grp20 (1A),(1C) 1d: -1e: +1e: NOP Gy,Gy 1f: NOP Ev # 0x0f 0x20-0x2f 20: MOV Rd,Cd@@ -804,7 +804,7 @@ f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) f3: Grp17 (1A) f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) +f6: NOP Ey,Gy | ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) f9: MOVDIRI My,Gytools/arch/x86/lib/x86-opcode-map.txt +2
-2@@ -366,7 +366,7 @@ AVXcode: 1 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv 1c: Grp20 (1A),(1C) 1d: -1e: +1e: NOP Gy,Gy 1f: NOP Ev # 0x0f 0x20-0x2f 20: MOV Rd,Cd@@ -804,7 +804,7 @@ f1: MOVBE My,Gy | MOVBE Mw,Gw (66) | CRC32 Gd,Ey (F2) | CRC32 Gd,Ew (66&F2) f2: ANDN Gy,By,Ey (v) f3: Grp17 (1A) f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v) -f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) +f6: NOP Ey,Gy | ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v) f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v) f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3) f9: MOVDIRI My,GySignature · 1 line
2.25.1
Signature · 1 line
Masami Hiramatsu <[email protected]>
Quoted 21 lines · Masami Hiramatsu
Hi,
Quoted 11 lines · On Mon, 2 Mar 2020 23:50:30 -0500 Mingbo Zhang <[email protected]> wrote:
Intel CET instructions are not described in the Intel SDM. When trying to get the instruction length, the following instructions get wrong (missing ModR/M byte).
RDSSPD r32
RSDDPQ r64
ENDBR32
ENDBR64
WRSSD r/m32, r32
WRSSQ r/m64, r64Quoted 4 lines
RDSSPD/Q and ENDBR32/64 use the same opcode (f3 0f 1e) slot, which is described in SDM as Reserved-NOP with no encoding characters, and got an empty slot in the opcode map. WRSSD/Q (0f 38 f6) also got an empty slot.
Quoted 6 lines
This looks good to me. BTW, wouldn't we need to add decode test cases to perf?
Acked-by Masami Hiramatsu <[email protected]>Thank you,
We have correct patches that you ack'ed for CET here:
https://lore.kernel.org/lkml/[email protected]/
But they have not yet been applied.
Sorry for the confusion.
Em Thu, Mar 26, 2020 at 07:09:45AM +0200, Adrian Hunter escreveu:
Quoted 29 lines · Masami Hiramatsu
Quoted 21 lines
Hi,
Quoted 11 lines · On Mon, 2 Mar 2020 23:50:30 -0500 Mingbo Zhang <[email protected]> wrote:
Intel CET instructions are not described in the Intel SDM. When trying to get the instruction length, the following instructions get wrong (missing ModR/M byte).
RDSSPD r32
RSDDPQ r64
ENDBR32
ENDBR64
WRSSD r/m32, r32
WRSSQ r/m64, r64Quoted 4 lines
RDSSPD/Q and ENDBR32/64 use the same opcode (f3 0f 1e) slot, which is described in SDM as Reserved-NOP with no encoding characters, and got an empty slot in the opcode map. WRSSD/Q (0f 38 f6) also got an empty slot.
Quoted 6 lines
This looks good to me. BTW, wouldn't we need to add decode test cases to perf?
Acked-by Masami Hiramatsu <[email protected]>Thank you,
Quoted 7 lines
We have correct patches that you ack'ed for CET here:
https://lore.kernel.org/lkml/[email protected]/But they have not yet been applied.
Sorry for the confusion.
I'll collect them, thanks for pointing this out.
- Arnaldo
Quoted 49 lines
-----Original Message-----
From: Arnaldo Carvalho de Melo <[email protected]>
Sent: Thursday, March 26, 2020 3:56 PM
To: Hunter, Adrian <[email protected]>
Cc: Masami Hiramatsu <[email protected]>; Mingbo Zhang <[email protected]>; Arnaldo Carvalho de Melo <[email protected]>; [email protected]; Thomas Gleixner <[email protected]>; Ingo Molnar <[email protected]>; Borislav Petkov <[email protected]>; H. Peter Anvin <[email protected]>; Andi Kleen <[email protected]>; Josh Poimboeuf <[email protected]>; linux- [email protected]
Subject: Re: [PATCH] x86: perf: insn: Tweak opcode map for Intel CET instructionsEm Thu, Mar 26, 2020 at 07:09:45AM +0200, Adrian Hunter escreveu:
Quoted 17 lines · Masami Hiramatsu
Quoted 16 lines
Hi,
Quoted 11 lines · On Mon, 2 Mar 2020 23:50:30 -0500 Mingbo Zhang <[email protected]> wrote:
Intel CET instructions are not described in the Intel SDM. When trying to get the instruction length, the following instructions get wrong (missing ModR/M byte).
RDSSPD r32
RSDDPQ r64
ENDBR32
ENDBR64
WRSSD r/m32, r32
WRSSQ r/m64, r64Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
RDSSPD/Q and ENDBR32/64 use the same opcode (f3 0f 1e) slot, which is described in SDM as Reserved-NOP with no encoding characters, and got an empty slot in the opcode map. WRSSD/Q (0f 38 f6) also got
an empty slot.
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
This looks good to me. BTW, wouldn't we need to add decode test cases
to perf?
Quoted 9 lines
Quoted 5 lines
Acked-by Masami Hiramatsu <[email protected]>Thank you,
We have correct patches that you ack'ed for CET here:
Quoted 8 lines
Quoted 6 lines
https://lore.kernel.org/lkml/20200204171425.28073-1-yu-cheng.yu@intel.
com/But they have not yet been applied.
Sorry for the confusion.
I'll collect them, thanks for pointing this out.
The patches are in tip courtesy of Borislav Petkov thank you!
Em Thu, Mar 26, 2020 at 02:19:07PM +0000, Hunter, Adrian escreveu:
Quoted 52 lines
Quoted 52 lines
-----Original Message-----
From: Arnaldo Carvalho de Melo <[email protected]>
Sent: Thursday, March 26, 2020 3:56 PM
To: Hunter, Adrian <[email protected]>
Cc: Masami Hiramatsu <[email protected]>; Mingbo Zhang <[email protected]>; Arnaldo Carvalho de Melo <[email protected]>; [email protected]; Thomas Gleixner <[email protected]>; Ingo Molnar <[email protected]>; Borislav Petkov <[email protected]>; H. Peter Anvin <[email protected]>; Andi Kleen <[email protected]>; Josh Poimboeuf <[email protected]>; linux- [email protected]
Subject: Re: [PATCH] x86: perf: insn: Tweak opcode map for Intel CET instructionsEm Thu, Mar 26, 2020 at 07:09:45AM +0200, Adrian Hunter escreveu:
Quoted 17 lines · Masami Hiramatsu
Quoted 16 lines
Hi,
Quoted 11 lines · On Mon, 2 Mar 2020 23:50:30 -0500 Mingbo Zhang <[email protected]> wrote:
Intel CET instructions are not described in the Intel SDM. When trying to get the instruction length, the following instructions get wrong (missing ModR/M byte).
RDSSPD r32
RSDDPQ r64
ENDBR32
ENDBR64
WRSSD r/m32, r32
WRSSQ r/m64, r64Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
RDSSPD/Q and ENDBR32/64 use the same opcode (f3 0f 1e) slot, which is described in SDM as Reserved-NOP with no encoding characters, and got an empty slot in the opcode map. WRSSD/Q (0f 38 f6) also got
an empty slot.
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
This looks good to me. BTW, wouldn't we need to add decode test cases
to perf?
Quoted 12 lines
Quoted 5 lines
Acked-by Masami Hiramatsu <[email protected]>Thank you,
We have correct patches that you ack'ed for CET here:
https://lore.kernel.org/lkml/20200204171425.28073-1-yu-cheng.yu@intel.
com/
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
But they have not yet been applied.
Sorry for the confusion.
I'll collect them, thanks for pointing this out.
The patches are in tip courtesy of Borislav Petkov thank you!
Ok, thanks Borislav,
- Arnaldo
Em Thu, Mar 26, 2020 at 11:57:26AM -0300, Arnaldo Carvalho de Melo escreveu:
Quoted 10 lines
Em Thu, Mar 26, 2020 at 02:19:07PM +0000, Hunter, Adrian escreveu:
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
But they have not yet been applied.
Sorry for the confusion.
I'll collect them, thanks for pointing this out.
The patches are in tip courtesy of Borislav Petkov thank you!
Ok, thanks Borislav,
I didn't notice because it didn't made into tip/perf/core :-\ In what branch is it btw, I couldn't find any cset with substr summary "Add Control-flow Enforcement" in, tip/master also doesn't have it.
- Arnaldo
Quoted 10 lines · Arnaldo Carvalho de Melo
Em Thu, Mar 26, 2020 at 11:57:26AM -0300, Arnaldo Carvalho de Melo escreveu:
Quoted 8 lines
Em Thu, Mar 26, 2020 at 02:19:07PM +0000, Hunter, Adrian escreveu:
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
But they have not yet been applied.
Sorry for the confusion.
I'll collect them, thanks for pointing this out.
The patches are in tip courtesy of Borislav Petkov thank you!
Quoted 8 lines
Quoted 1 line
Ok, thanks Borislav,
I didn't notice because it didn't made into tip/perf/core :-\ In what branch is it btw, I couldn't find any cset with substr summary "Add Control-flow Enforcement" in, tip/master also doesn't have it.
- Arnaldo
x86/misc
Em Thu, Mar 26, 2020 at 07:36:27PM +0200, Adrian Hunter escreveu:
Quoted 17 lines · Arnaldo Carvalho de Melo
Quoted 16 lines
Em Thu, Mar 26, 2020 at 11:57:26AM -0300, Arnaldo Carvalho de Melo escreveu:
Quoted 10 lines
Em Thu, Mar 26, 2020 at 02:19:07PM +0000, Hunter, Adrian escreveu:
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
But they have not yet been applied.
Sorry for the confusion.
I'll collect them, thanks for pointing this out.
The patches are in tip courtesy of Borislav Petkov thank you!
Ok, thanks Borislav,
I didn't notice because it didn't made into tip/perf/core :-\ In what branch is it btw, I couldn't find any cset with substr summary "Add Control-flow Enforcement" in, tip/master also doesn't have it.
Quoted 5 lines
Quoted 2 lines
- Arnaldo
x86/misc
Right, he told me, thanks,
- Arnaldo