Skip to contentSkip to conversation

Enable VDSC output formats validation

PATCH Superseded Swati Sharma 4 participants 15 messages Feb 2, 2023 – Feb 3, 2023 Library code

v2 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

v2 cover Enable VDSC output formats validation

This series is split from
https://patchwork.freedesktop.org/series/111342/

Initial dsc lib related changes got merged. Received review comments on driver debugfs YCBCR420 changes, to make debugfs entry generic so that all supported output formats can be validated.

In this series, review comments from above PW are addressed. Along, with that changes are done to make test generic to validate all supported dsc formats.

Swati Sharma (6):
lib/dsc: Fix return value
tests/i915/kms_dsc: Add plane_format as struct data_t member tests/i915/kms_dsc: Remove pointless struct tests/i915/kms_dsc: Make bpc_list static
lib/dsc: Add helpers for VDSC output format debugfs entry tests/i915/kms_dsc: Enable validation for VDSC output formats

 lib/igt_dsc.c               |  56 +++++++++++++++-
 lib/igt_dsc.h               |   5 ++
 lib/igt_kms.c               |  18 +++++
 lib/igt_kms.h               |   7 ++
 tests/i915/kms_dsc.c        | 128 ++++++++++++++++++++++++++----------
 tests/i915/kms_dsc_helper.c |  40 ++++++++++-
 tests/i915/kms_dsc_helper.h |   4 ++
 7 files changed, 218 insertions(+), 40 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH v2 1/6 lib/dsc: Fix return value

0 is usually success, < 0 is error. Fix that.

---
 lib/igt_dsc.c               | 7 +++++--
 tests/i915/kms_dsc_helper.c | 4 ++--
 2 files changed, 7 insertions(+), 4 deletions(-)
lib/igt_dsc.c +5 -2
index 25dcb5840..64dd6b29a 100644
@@ -35,6 +35,9 @@ static int write_dsc_debugfs(int drmfd, char *connector_name, const char *file_n
 
 	close(debugfs_fd);
 
+	if (ret > 0)
+		return 0;
+
 	return ret;
 }
 
@@ -92,7 +95,7 @@ bool igt_is_force_dsc_enabled(int drmfd, char *connector_name)
  * @drmfd: A drm file descriptor
  * @connector_name: Name of the libdrm connector we're going to use
  *
- * Returns: 1 on success or negative error code, in case of failure.
+ * Returns: 0 on success or negative error code, in case of failure.
  */
 int igt_force_dsc_enable(int drmfd, char *connector_name)
 {
@@ -105,7 +108,7 @@ int igt_force_dsc_enable(int drmfd, char *connector_name)
  * @connector_name: Name of the libdrm connector we're going to use
  * @bpc: Input BPC
  *
- * Returns: No. of bytes written or negative error code, in case of failure.
+ * Returns: 0 on success or negative error code, in case of failure.
  */
 int igt_force_dsc_enable_bpc(int drmfd, char *connector_name, int bpc)
 {
tests/i915/kms_dsc_helper.c +2 -2
index a80f3d787..e2c278c7a 100644
@@ -14,7 +14,7 @@ void force_dsc_enable(int drmfd, igt_output_t *output)
 
 	igt_debug("Forcing DSC enable on %s\n", output->name);
 	ret = igt_force_dsc_enable(drmfd, output->name);
-	igt_assert_f(ret > 0, "forcing dsc enable debugfs_write failed\n");
+	igt_assert_f(ret == 0, "forcing dsc enable debugfs_write failed\n");
 }
 
 void force_dsc_enable_bpc(int drmfd, igt_output_t *output, int input_bpc)
@@ -24,7 +24,7 @@ void force_dsc_enable_bpc(int drmfd, igt_output_t *output, int input_bpc)
 	igt_debug("Forcing input DSC BPC to %d on %s\n",
 		  input_bpc, output->name);
 	ret = igt_force_dsc_enable_bpc(drmfd, output->name, input_bpc);
-	igt_assert_f(ret > 0, "forcing input dsc bpc debugfs_write failed\n");
+	igt_assert_f(ret == 0, "forcing input dsc bpc debugfs_write failed\n");
 }
 
 void save_force_dsc_en(int drmfd, igt_output_t *output)
Signature · 1 line
2.25.1
#2 lore raw

PATCH v2 2/6 tests/i915/kms_dsc: Add plane_format as struct data_t member

In reply to Swati Sharma

plane_format is added as struct data_t member. Also, corresponding changes are done to accommodate this change.

---
 tests/i915/kms_dsc.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
tests/i915/kms_dsc.c +8 -6
index 8f32ae950..af9466518 100644
@@ -44,6 +44,7 @@ typedef struct {
 	uint32_t devid;
 	igt_display_t display;
 	struct igt_fb fb_test_pattern;
+	unsigned int plane_format;
 	igt_output_t *output;
 	int input_bpc;
 	int n_pipes;
@@ -108,7 +109,7 @@ static void test_cleanup(data_t *data)
 }
 
 /* re-probe connectors and do a modeset with DSC */
-static void update_display(data_t *data, enum dsc_test_type test_type, unsigned int plane_format)
+static void update_display(data_t *data, enum dsc_test_type test_type)
 {
 	bool enabled;
 	igt_plane_t *primary;
@@ -137,13 +138,13 @@ static void update_display(data_t *data, enum dsc_test_type test_type, unsigned
 
 	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
 
-	igt_skip_on(!igt_plane_has_format_mod(primary, plane_format,
+	igt_skip_on(!igt_plane_has_format_mod(primary, data->plane_format,
 		    DRM_FORMAT_MOD_LINEAR));
 
 	igt_create_pattern_fb(data->drm_fd,
 			      mode->hdisplay,
 			      mode->vdisplay,
-			      plane_format,
+			      data->plane_format,
 			      DRM_FORMAT_MOD_LINEAR,
 			      &data->fb_test_pattern);
 
@@ -184,6 +185,7 @@ static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
 	enum pipe pipe;
 
 	for_each_pipe_with_valid_output(display, pipe, output) {
+		data->plane_format = plane_format;
 		data->input_bpc = bpc;
 		data->output = output;
 		data->pipe = pipe;
@@ -201,12 +203,12 @@ static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
 			continue;
 
 		if (test_type == TEST_DSC_BPC)
-			snprintf(name, sizeof(name), "-%dbpc-%s", data->input_bpc, igt_format_str(plane_format));
+			snprintf(name, sizeof(name), "-%dbpc-%s", data->input_bpc, igt_format_str(data->plane_format));
 		else
-			snprintf(name, sizeof(name), "-%s", igt_format_str(plane_format));
+			snprintf(name, sizeof(name), "-%s", igt_format_str(data->plane_format));
 
 		igt_dynamic_f("pipe-%s-%s%s",  kmstest_pipe_name(data->pipe), data->output->name, name)
-			update_display(data, test_type, plane_format);
+			update_display(data, test_type);
 	}
 }
 
Signature · 1 line
2.25.1
#3 lore raw

PATCH v2 3/6 tests/i915/kms_dsc: Remove pointless struct

In reply to Swati Sharma

Array can be used for plane_format. Use that and remove struct.

v2: -make format list static (Jouni)

---
 tests/i915/kms_dsc.c | 15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)
tests/i915/kms_dsc.c +3 -12
index af9466518..0f048e575 100644
@@ -52,16 +52,7 @@ typedef struct {
 	enum pipe pipe;
 } data_t;
 
-const struct {
-	const int format;
-	const char format_str[20];
-} format_list[] = {
-	{DRM_FORMAT_XYUV8888, "XYUV8888"},
-	{DRM_FORMAT_XRGB2101010, "XRGB2101010"},
-	{DRM_FORMAT_XRGB16161616F, "XRGB16161616F"},
-	{DRM_FORMAT_YUYV, "YUYV"},
-};
-
+static int format_list[] =  {DRM_FORMAT_XYUV8888, DRM_FORMAT_XRGB2101010, DRM_FORMAT_XRGB16161616F, DRM_FORMAT_YUYV};
 uint32_t bpc_list[] = {12, 10, 8};
 
 static inline void manual(const char *expected)
@@ -242,7 +233,7 @@ igt_main
 		     "with default parameters and creating fb with diff formats");
 	igt_subtest_with_dynamic("dsc-with-formats") {
 		for (int k = 0; k < ARRAY_SIZE(format_list); k++)
-			test_dsc(&data, TEST_DSC_BASIC, 0, format_list[k].format);
+			test_dsc(&data, TEST_DSC_BASIC, 0, format_list[k]);
 	}
 
 	igt_describe("Tests basic display stream compression functionality if supported "
@@ -259,7 +250,7 @@ igt_main
 	igt_subtest_with_dynamic("dsc-with-bpc-formats") {
 		for (int j = 0; j < ARRAY_SIZE(bpc_list); j++) {
 			for (int k = 0; k < ARRAY_SIZE(format_list); k++) {
-				test_dsc(&data, TEST_DSC_BPC, bpc_list[j], format_list[k].format);
+				test_dsc(&data, TEST_DSC_BPC, bpc_list[j], format_list[k]);
 			}
 		}
 	}
Signature · 1 line
2.25.1
#4 lore raw

Re: [igt-dev] [PATCH i-g-t v2 3/6] tests/i915/kms_dsc: Remove pointless struct

Hi Swati,

Quoted 4 lines · Swati Sharma

Array can be used for plane_format. Use that and remove struct.

v2: -make format list static (Jouni)

Please use checkpatch script from Linux kernel source to find out and correct some problems. You can sometimes ignore some warnings like line too long or string splitted but please correct all others.

+cc Jouni

Quoted 15 lines
---
 tests/i915/kms_dsc.c | 15 +++------------
 1 file changed, 3 insertions(+), 12 deletions(-)
tests/i915/kms_dsc.c +0 -1
index af9466518..0f048e575 100644
@@ -52,16 +52,7 @@ typedef struct {
 	enum pipe pipe;
 } data_t;
 
-const struct {

tests/i915/kms_dsc.c typedef struct { · line 55

Quoted 10 lines
tests/i915/kms_dsc.c +1 -9
-	const int format;
-	const char format_str[20];
-} format_list[] = {
-	{DRM_FORMAT_XYUV8888, "XYUV8888"},
-	{DRM_FORMAT_XRGB2101010, "XRGB2101010"},
-	{DRM_FORMAT_XRGB16161616F, "XRGB16161616F"},
-	{DRM_FORMAT_YUYV, "YUYV"},
-};
-
+static int format_list[] =  {DRM_FORMAT_XYUV8888, DRM_FORMAT_XRGB2101010, DRM_FORMAT_XRGB16161616F, DRM_FORMAT_YUYV};

---------------------------- ^^ ^
imho this should be:

static int format_list[] = {
	DRM_FORMAT_XYUV8888,
	DRM_FORMAT_XRGB2101010,
	DRM_FORMAT_XRGB16161616F,
	DRM_FORMAT_YUYV
};

Regards,
Kamil

Quoted 24 lines
tests/i915/kms_dsc.c +2 -2
 uint32_t bpc_list[] = {12, 10, 8};
 
 static inline void manual(const char *expected)
@@ -242,7 +233,7 @@ igt_main
 		     "with default parameters and creating fb with diff formats");
 	igt_subtest_with_dynamic("dsc-with-formats") {
 		for (int k = 0; k < ARRAY_SIZE(format_list); k++)
-			test_dsc(&data, TEST_DSC_BASIC, 0, format_list[k].format);
+			test_dsc(&data, TEST_DSC_BASIC, 0, format_list[k]);
 	}
 
 	igt_describe("Tests basic display stream compression functionality if supported "
@@ -259,7 +250,7 @@ igt_main
 	igt_subtest_with_dynamic("dsc-with-bpc-formats") {
 		for (int j = 0; j < ARRAY_SIZE(bpc_list); j++) {
 			for (int k = 0; k < ARRAY_SIZE(format_list); k++) {
-				test_dsc(&data, TEST_DSC_BPC, bpc_list[j], format_list[k].format);
+				test_dsc(&data, TEST_DSC_BPC, bpc_list[j], format_list[k]);
 			}
 		}
 	}
Signature · 1 line
2.25.1
#5 lore raw

Re: [igt-dev] [PATCH i-g-t v2 3/6] tests/i915/kms_dsc: Remove pointless struct

Hi Kamil,

Can we add checkpatch for patchwork IGT in CI infrastructure like how we have for patchwork intel-gfx?

Quoted 6 lines · Kamil Konieczny

Hi Swati,

Quoted 3 lines · Swati Sharma

Array can be used for plane_format. Use that and remove struct.

Quoted 8 lines
Quoted 1 line

v2: -make format list static (Jouni)

Please use checkpatch script from Linux kernel source to find out and correct some problems. You can sometimes ignore some warnings like line too long or string splitted but please correct all others.

+cc Jouni

Sorry, this patch is already merged; will take care next time.

Quoted 62 lines
Quoted 16 lines
---
  tests/i915/kms_dsc.c | 15 +++------------
  1 file changed, 3 insertions(+), 12 deletions(-)
tests/i915/kms_dsc.c +0 -1
index af9466518..0f048e575 100644
@@ -52,16 +52,7 @@ typedef struct {
  	enum pipe pipe;
  } data_t;
 
-const struct {

tests/i915/kms_dsc.c typedef struct { · line 55

Quoted 10 lines
tests/i915/kms_dsc.c +1 -9
-	const int format;
-	const char format_str[20];
-} format_list[] = {
-	{DRM_FORMAT_XYUV8888, "XYUV8888"},
-	{DRM_FORMAT_XRGB2101010, "XRGB2101010"},
-	{DRM_FORMAT_XRGB16161616F, "XRGB16161616F"},
-	{DRM_FORMAT_YUYV, "YUYV"},
-};
-
+static int format_list[] =  {DRM_FORMAT_XYUV8888, DRM_FORMAT_XRGB2101010, DRM_FORMAT_XRGB16161616F, DRM_FORMAT_YUYV};

---------------------------- ^^ ^
imho this should be:

static int format_list[] = {
	DRM_FORMAT_XYUV8888,
	DRM_FORMAT_XRGB2101010,
	DRM_FORMAT_XRGB16161616F,
	DRM_FORMAT_YUYV
};

Regards,
Kamil

Quoted 24 lines
tests/i915/kms_dsc.c +2 -2
  uint32_t bpc_list[] = {12, 10, 8};
 
  static inline void manual(const char *expected)
@@ -242,7 +233,7 @@ igt_main
  		     "with default parameters and creating fb with diff formats");
  	igt_subtest_with_dynamic("dsc-with-formats") {
  		for (int k = 0; k < ARRAY_SIZE(format_list); k++)
-			test_dsc(&data, TEST_DSC_BASIC, 0, format_list[k].format);
+			test_dsc(&data, TEST_DSC_BASIC, 0, format_list[k]);
  	}
 
  	igt_describe("Tests basic display stream compression functionality if supported "
@@ -259,7 +250,7 @@ igt_main
  	igt_subtest_with_dynamic("dsc-with-bpc-formats") {
  		for (int j = 0; j < ARRAY_SIZE(bpc_list); j++) {
  			for (int k = 0; k < ARRAY_SIZE(format_list); k++) {
-				test_dsc(&data, TEST_DSC_BPC, bpc_list[j], format_list[k].format);
+				test_dsc(&data, TEST_DSC_BPC, bpc_list[j], format_list[k]);
  			}
  		}
  	}
Signature · 1 line
2.25.1
Signature · 1 line
~Swati Sharma
#6 lore raw

PATCH v2 4/6 tests/i915/kms_dsc: Make bpc_list static

In reply to Swati Sharma

Change bpc_list as static.

---
 tests/i915/kms_dsc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tests/i915/kms_dsc.c +1 -1
index 0f048e575..21addb234 100644
@@ -53,7 +53,7 @@ typedef struct {
 } data_t;
 
 static int format_list[] =  {DRM_FORMAT_XYUV8888, DRM_FORMAT_XRGB2101010, DRM_FORMAT_XRGB16161616F, DRM_FORMAT_YUYV};
-uint32_t bpc_list[] = {12, 10, 8};
+static uint32_t bpc_list[] = {12, 10, 8};
 
 static inline void manual(const char *expected)
 {
Signature · 1 line
2.25.1
#7 lore raw

PATCH v2 5/6 lib/dsc: Add helpers for VDSC output format debugfs entry

In reply to Swati Sharma

Helper functions are added for VDSC output format debugfs entry.

---
 lib/igt_dsc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 lib/igt_dsc.h |  5 +++++
 lib/igt_kms.h |  6 ++++++
 3 files changed, 60 insertions(+)
lib/igt_dsc.c +49 -0
index 64dd6b29a..1f6d33291 100644
@@ -134,3 +134,52 @@ int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name)
 
 	return openat(igt_debugfs_dir(drmfd), file_name, O_WRONLY);
 }
+
+/*
+ * igt_is_dsc_output_format_supported_by_sink:
+ * @drmfd: A drm file descriptor
+ * @connector_name: Name of the libdrm connector we're going to use
+ * @output_format: Output format
+ *
+ * Returns: True if DSC output format is supported for the given connector,
+ * false otherwise.
+ */
+bool igt_is_dsc_output_format_supported_by_sink(int drmfd, char *connector_name,
+						enum dsc_output_format output_format)
+{
+	const char *check_str = "OUTPUTFORMATNOTFOUND";
+
+	switch(output_format) {
+	case DSC_FORMAT_RGB:
+		check_str = "RGB: yes";
+		break;
+	case DSC_FORMAT_YCBCR420:
+		check_str = "YCBCR420: yes";
+		break;
+	case DSC_FORMAT_YCBCR444:
+		check_str = "YCBCR444: yes";
+		break;
+	default:
+		break;
+	}
+
+	return check_dsc_debugfs(drmfd, connector_name, check_str);
+}
+
+/*
+ * igt_force_dsc_output_format:
+ * @drmfd: A drm file descriptor
+ * @connector_name: Name of the libdrm connector we're going to use
+ * @output_format: Output format
+ *
+ * Returns: 0 on success or negative error code, in case of failure.
+ */
+int igt_force_dsc_output_format(int drmfd, char *connector_name,
+				enum dsc_output_format output_format)
+{
+	char buf[20] = {0};
+
+	sprintf(buf, "%d", output_format);
+
+	return write_dsc_debugfs(drmfd, connector_name, "i915_dsc_output_format", buf);
+}
lib/igt_dsc.h +5 -0
index 291c2cdea..9608aad44 100644
@@ -7,6 +7,7 @@
 #define IGT_DSC_H
 
 #include "igt_fb.h"
+#include "igt_kms.h"
 
 bool igt_is_dsc_supported(int drmfd, char *connector_name);
 bool igt_is_fec_supported(int drmfd, char *connector_name);
@@ -15,5 +16,9 @@ bool igt_is_force_dsc_enabled(int drmfd, char *connector_name);
 int igt_force_dsc_enable(int drmfd, char *connector_name);
 int igt_force_dsc_enable_bpc(int drmfd, char *connector_name, int bpc);
 int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name);
+bool igt_is_dsc_output_format_supported_by_sink(int drmfd, char *connector_name,
+						enum dsc_output_format output_format);
+int igt_force_dsc_output_format(int drmfd, char *connector_name,
+				enum dsc_output_format output_format);
 
 #endif
lib/igt_kms.h +6 -0
index be5482e08..9f5bef170 100644
@@ -106,6 +106,12 @@ enum igt_custom_edid_type {
  */
 #define kmstest_port_name(port) ((port) + 'A')
 
+enum dsc_output_format {
+	DSC_FORMAT_RGB = 0,
+	DSC_FORMAT_YCBCR420,
+	DSC_FORMAT_YCBCR444
+};
+
 const char *kmstest_encoder_type_str(int type);
 const char *kmstest_connector_status_str(int status);
 const char *kmstest_connector_type_str(int type);
Signature · 1 line
2.25.1
#8 lore raw

Re: [igt-dev] [PATCH i-g-t v2 5/6] lib/dsc: Add helpers for VDSC output format debugfs entry

Hi Swati,

Quoted 14 lines · Swati Sharma

Helper functions are added for VDSC output format debugfs entry.

---
 lib/igt_dsc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 lib/igt_dsc.h |  5 +++++
 lib/igt_kms.h |  6 ++++++
 3 files changed, 60 insertions(+)
lib/igt_dsc.c +0 -0
index 64dd6b29a..1f6d33291 100644

lib/igt_dsc.c int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name) · line 138

Quoted 5 lines
lib/igt_dsc.c +2 -0
@@ -134,3 +134,52 @@ int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name)
 
 	return openat(igt_debugfs_dir(drmfd), file_name, O_WRONLY);
 }
+
+/*

--- ^
Descriptions should start with two stars, so it should look like:

/**
* igt_is_dsc_output_format_supported_by_sink:

Quoted 4 lines
lib/igt_dsc.c +4 -0
+ * igt_is_dsc_output_format_supported_by_sink:
+ * @drmfd: A drm file descriptor
+ * @connector_name: Name of the libdrm connector we're going to use
+ * @output_format: Output format

lib/igt_dsc.c int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name) · line 152

Quoted 10 lines
lib/igt_dsc.c +10 -0
+ *
+ * Returns: True if DSC output format is supported for the given connector,
+ * false otherwise.
+ */
+bool igt_is_dsc_output_format_supported_by_sink(int drmfd, char *connector_name,
+						enum dsc_output_format output_format)
+{
+	const char *check_str = "OUTPUTFORMATNOTFOUND";
+
+	switch(output_format) {

--------------^
Put space after "switch" and before opening "(":

	switch (output_format) {

Please use checkpatch script from Linux kernel sources, it can help you catch such errors.

Quoted 7 lines
lib/igt_dsc.c +7 -0
+	case DSC_FORMAT_RGB:
+		check_str = "RGB: yes";
+		break;
+	case DSC_FORMAT_YCBCR420:
+		check_str = "YCBCR420: yes";
+		break;
+	case DSC_FORMAT_YCBCR444:

lib/igt_dsc.c int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name) · line 169

Quoted 10 lines
lib/igt_dsc.c +10 -0
+		check_str = "YCBCR444: yes";
+		break;
+	default:
+		break;
+	}
+
+	return check_dsc_debugfs(drmfd, connector_name, check_str);
+}
+
+/*

--- ^
Same here, two stars.

Regards,
Kamil

Quoted 58 lines
lib/igt_dsc.c +16 -0
+ * igt_force_dsc_output_format:
+ * @drmfd: A drm file descriptor
+ * @connector_name: Name of the libdrm connector we're going to use
+ * @output_format: Output format
+ *
+ * Returns: 0 on success or negative error code, in case of failure.
+ */
+int igt_force_dsc_output_format(int drmfd, char *connector_name,
+				enum dsc_output_format output_format)
+{
+	char buf[20] = {0};
+
+	sprintf(buf, "%d", output_format);
+
+	return write_dsc_debugfs(drmfd, connector_name, "i915_dsc_output_format", buf);
+}
lib/igt_dsc.h +5 -0
index 291c2cdea..9608aad44 100644
@@ -7,6 +7,7 @@
 #define IGT_DSC_H
 
 #include "igt_fb.h"
+#include "igt_kms.h"
 
 bool igt_is_dsc_supported(int drmfd, char *connector_name);
 bool igt_is_fec_supported(int drmfd, char *connector_name);
@@ -15,5 +16,9 @@ bool igt_is_force_dsc_enabled(int drmfd, char *connector_name);
 int igt_force_dsc_enable(int drmfd, char *connector_name);
 int igt_force_dsc_enable_bpc(int drmfd, char *connector_name, int bpc);
 int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name);
+bool igt_is_dsc_output_format_supported_by_sink(int drmfd, char *connector_name,
+						enum dsc_output_format output_format);
+int igt_force_dsc_output_format(int drmfd, char *connector_name,
+				enum dsc_output_format output_format);
 
 #endif
lib/igt_kms.h +6 -0
index be5482e08..9f5bef170 100644
@@ -106,6 +106,12 @@ enum igt_custom_edid_type {
  */
 #define kmstest_port_name(port) ((port) + 'A')
 
+enum dsc_output_format {
+	DSC_FORMAT_RGB = 0,
+	DSC_FORMAT_YCBCR420,
+	DSC_FORMAT_YCBCR444
+};
+
 const char *kmstest_encoder_type_str(int type);
 const char *kmstest_connector_status_str(int status);
 const char *kmstest_connector_type_str(int type);
Signature · 1 line
2.25.1
#9 lore raw

Re: [igt-dev] [PATCH i-g-t v2 5/6] lib/dsc: Add helpers for VDSC output format debugfs entry

Hi Kamil,

Will address your review comments in next version.

Quoted 130 lines · Kamil Konieczny

Hi Swati,

Quoted 14 lines · Swati Sharma

Helper functions are added for VDSC output format debugfs entry.

---
  lib/igt_dsc.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
  lib/igt_dsc.h |  5 +++++
  lib/igt_kms.h |  6 ++++++
  3 files changed, 60 insertions(+)
lib/igt_dsc.c +0 -0
index 64dd6b29a..1f6d33291 100644

lib/igt_dsc.c int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name) · line 138

Quoted 5 lines
lib/igt_dsc.c +2 -0
@@ -134,3 +134,52 @@ int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name)
 
  	return openat(igt_debugfs_dir(drmfd), file_name, O_WRONLY);
  }
+
+/*

--- ^
Descriptions should start with two stars, so it should look like:

/**
* igt_is_dsc_output_format_supported_by_sink:

Quoted 4 lines
lib/igt_dsc.c +4 -0
+ * igt_is_dsc_output_format_supported_by_sink:
+ * @drmfd: A drm file descriptor
+ * @connector_name: Name of the libdrm connector we're going to use
+ * @output_format: Output format

lib/igt_dsc.c int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name) · line 152

Quoted 10 lines
lib/igt_dsc.c +10 -0
+ *
+ * Returns: True if DSC output format is supported for the given connector,
+ * false otherwise.
+ */
+bool igt_is_dsc_output_format_supported_by_sink(int drmfd, char *connector_name,
+						enum dsc_output_format output_format)
+{
+	const char *check_str = "OUTPUTFORMATNOTFOUND";
+
+	switch(output_format) {

--------------^
Put space after "switch" and before opening "(":

	switch (output_format) {

Please use checkpatch script from Linux kernel sources, it can help you catch such errors.

Quoted 7 lines
lib/igt_dsc.c +7 -0
+	case DSC_FORMAT_RGB:
+		check_str = "RGB: yes";
+		break;
+	case DSC_FORMAT_YCBCR420:
+		check_str = "YCBCR420: yes";
+		break;
+	case DSC_FORMAT_YCBCR444:

lib/igt_dsc.c int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name) · line 169

Quoted 10 lines
lib/igt_dsc.c +10 -0
+		check_str = "YCBCR444: yes";
+		break;
+	default:
+		break;
+	}
+
+	return check_dsc_debugfs(drmfd, connector_name, check_str);
+}
+
+/*

--- ^
Same here, two stars.

Regards,
Kamil

Quoted 58 lines
lib/igt_dsc.c +16 -0
+ * igt_force_dsc_output_format:
+ * @drmfd: A drm file descriptor
+ * @connector_name: Name of the libdrm connector we're going to use
+ * @output_format: Output format
+ *
+ * Returns: 0 on success or negative error code, in case of failure.
+ */
+int igt_force_dsc_output_format(int drmfd, char *connector_name,
+				enum dsc_output_format output_format)
+{
+	char buf[20] = {0};
+
+	sprintf(buf, "%d", output_format);
+
+	return write_dsc_debugfs(drmfd, connector_name, "i915_dsc_output_format", buf);
+}
lib/igt_dsc.h +5 -0
index 291c2cdea..9608aad44 100644
@@ -7,6 +7,7 @@
  #define IGT_DSC_H
 
  #include "igt_fb.h"
+#include "igt_kms.h"
 
  bool igt_is_dsc_supported(int drmfd, char *connector_name);
  bool igt_is_fec_supported(int drmfd, char *connector_name);
@@ -15,5 +16,9 @@ bool igt_is_force_dsc_enabled(int drmfd, char *connector_name);
  int igt_force_dsc_enable(int drmfd, char *connector_name);
  int igt_force_dsc_enable_bpc(int drmfd, char *connector_name, int bpc);
  int igt_get_dsc_debugfs_fd(int drmfd, char *connector_name);
+bool igt_is_dsc_output_format_supported_by_sink(int drmfd, char *connector_name,
+						enum dsc_output_format output_format);
+int igt_force_dsc_output_format(int drmfd, char *connector_name,
+				enum dsc_output_format output_format);
 
  #endif
lib/igt_kms.h +6 -0
index be5482e08..9f5bef170 100644
@@ -106,6 +106,12 @@ enum igt_custom_edid_type {
   */
  #define kmstest_port_name(port) ((port) + 'A')
 
+enum dsc_output_format {
+	DSC_FORMAT_RGB = 0,
+	DSC_FORMAT_YCBCR420,
+	DSC_FORMAT_YCBCR444
+};
+
  const char *kmstest_encoder_type_str(int type);
  const char *kmstest_connector_status_str(int status);
  const char *kmstest_connector_type_str(int type);
Signature · 1 line
2.25.1
Signature · 1 line
~Swati Sharma
#10 lore raw

PATCH v2 6/6 tests/i915/kms_dsc: Enable validation for VDSC output formats

In reply to Swati Sharma

Existing i-g-t is extended to enable validation for VDSC output formats. Output format is selected as per driver policy. For ex: If a mode is supported in both RGB and YCbCr420 output formats by the sink, i915 driver policy is to try RGB first and fall back to YCbCr420, if mode cannot be shown using RGB.

To test DSC output format, a debugfs entry is created to force this output format. However, before setting debugfs entry, we have checked capability i.e. output format is supported by both platform and sink.

Also, each mode doesn't support all output formats; so if both sink and platform support an output format, we will do a try commit with each mode till we get a successful commit.

v2: -used is_dsc_ycbcr420_supported() (Ankit)
-handled try-commit correctly (Ankit)
-instead of flag use enum for output formats (Ankit)
v3: -instead of global count, pass count as para (Ankit)
-print output format (Ankit)
v4: -optimized while loop (Jouni)
-used only try commit (Jouni)
-fixed get_next_mode() (Jouni)
v5: -made generic test to validate all output formats (Jani N)
v6: -fixed assert (Jouni)

---
 lib/igt_kms.c               |  18 +++++++
 lib/igt_kms.h               |   1 +
 tests/i915/kms_dsc.c        | 103 +++++++++++++++++++++++++++++-------
 tests/i915/kms_dsc_helper.c |  36 +++++++++++++
 tests/i915/kms_dsc_helper.h |   4 ++
 5 files changed, 142 insertions(+), 20 deletions(-)
lib/igt_kms.c +18 -0
index 31e6dfda0..8563af470 100644
@@ -966,6 +966,24 @@ const char *kmstest_scaling_filter_str(int filter)
 	return find_type_name(scaling_filter_names, filter);
 }
 
+static const struct type_name dsc_output_format_names[] = {
+	{ DSC_FORMAT_RGB, "RGB" },
+	{ DSC_FORMAT_YCBCR420, "YCBCR420" },
+	{ DSC_FORMAT_YCBCR444, "YCBCR444" },
+	{}
+};
+
+/**
+ * kmstest_dsc_output_format_str:
+ * @output_format: DSC_FORMAT_* output format value
+ *
+ * Returns: A string representing the output format @output format.
+ */
+const char *kmstest_dsc_output_format_str(int output_format)
+{
+	return find_type_name(dsc_output_format_names, output_format);
+}
+
 static const struct type_name connector_type_names[] = {
 	{ DRM_MODE_CONNECTOR_Unknown, "Unknown" },
 	{ DRM_MODE_CONNECTOR_VGA, "VGA" },
lib/igt_kms.h +1 -0
index 9f5bef170..70f40baca 100644
@@ -116,6 +116,7 @@ const char *kmstest_encoder_type_str(int type);
 const char *kmstest_connector_status_str(int status);
 const char *kmstest_connector_type_str(int type);
 const char *kmstest_scaling_filter_str(int filter);
+const char *kmstest_dsc_output_format_str(int output_format);
 
 void kmstest_dump_mode(drmModeModeInfo *mode);
 #define MAX_HDISPLAY_PER_PIPE 5120
tests/i915/kms_dsc.c +83 -20

208 lines not on this page · raw message

tests/i915/kms_dsc_helper.c +36 -0
index e2c278c7a..05b38e5f9 100644
@@ -97,3 +97,39 @@ bool check_gen11_bpc_constraint(int drmfd, igt_output_t *output, int input_bpc)
 
 	return true;
 }
+
+void force_dsc_output_format(int drmfd, igt_output_t *output,
+			     enum dsc_output_format output_format)
+{
+	int ret;
+
+	igt_debug("Forcing DSC %s output format on %s\n",
+		  kmstest_dsc_output_format_str(output_format), output->name);
+	ret = igt_force_dsc_output_format(drmfd, output->name, output_format);
+	igt_assert_f(ret == 0, "forcing dsc output format debugfs_write failed\n");
+}
+
+/* YCbCr420 DSC is supported on display version 14+ with DSC1.2a */
+static bool is_dsc_output_format_supported_by_platform(int disp_ver, enum dsc_output_format output_format)
+{
+	if (disp_ver < 14 && output_format == DSC_FORMAT_YCBCR420) {
+		igt_debug("Ouput format DSC YCBCR420 supported on D14+ platforms\n");
+		return false;
+	}
+
+	return true;
+}
+
+bool is_dsc_output_format_supported(int drmfd, int disp_ver, igt_output_t *output,
+				    enum dsc_output_format output_format)
+{
+	if (!(igt_is_dsc_output_format_supported_by_sink(drmfd, output->name, output_format)) &&
+	     (is_dsc_output_format_supported_by_platform(disp_ver, output_format))) {
+		    igt_debug("DSC %s output format not supported on connector %s\n",
+			       kmstest_dsc_output_format_str(output_format),
+			       output->name);
+			return false;
+		}
+
+	return true;
+}
tests/i915/kms_dsc_helper.h +4 -0
index fe479dac4..244293cd0 100644
@@ -31,5 +31,9 @@ void kms_dsc_exit_handler(int sig);
 bool check_dsc_on_connector(int drmfd, igt_output_t *output);
 bool check_gen11_dp_constraint(int drmfd, igt_output_t *output, enum pipe pipe);
 bool check_gen11_bpc_constraint(int drmfd, igt_output_t *output, int input_bpc);
+void force_dsc_output_format(int drmfd, igt_output_t *output,
+			     enum dsc_output_format output_format);
+bool is_dsc_output_format_supported(int disp_ver, int drmfd, igt_output_t *output,
+				    enum dsc_output_format output_format);
 
 #endif
Signature · 1 line
2.25.1
#11 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for Enable VDSC output formats validation (rev2)

In reply to Swati Sharma
== Series Details ==

== Series Details ==

Series: Enable VDSC output formats validation (rev2)
URL : https://patchwork.freedesktop.org/series/113253/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_12681 -> IGTPW_8433
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/index.html

Participating hosts (25 -> 25)
------------------------------

Additional (1): fi-apl-guc
Missing (1): fi-snb-2520m

Known issues
------------

Here are the changes found in IGTPW_8433 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@fbdev@write:
- fi-blb-e6850: [PASS][1] -> [SKIP][2] ([fdo#109271]) +4 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/fi-blb-e6850/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/fi-blb-e6850/igt@[email protected]

* igt@gem_lmem_swapping@basic:
- fi-apl-guc: NOTRUN -> [SKIP][3] ([fdo#109271] / [i915#4613]) +3 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/fi-apl-guc/igt@[email protected]

* igt@kms_chamelium_hpd@vga-hpd-fast:
- fi-apl-guc: NOTRUN -> [SKIP][4] ([fdo#109271]) +21 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/fi-apl-guc/igt@[email protected]

#### Possible fixes ####

* igt@gem_exec_suspend@basic-s0@smem:
- {bat-rpls-1}: [ABORT][5] ([i915#6311] / [i915#7359]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/bat-rpls-1/igt@gem_exec_suspend@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/bat-rpls-1/igt@gem_exec_suspend@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[i915#1845]: https://gitlab.freedesktop.org/drm/intel/issues/1845
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#6311]: https://gitlab.freedesktop.org/drm/intel/issues/6311
[i915#6367]: https://gitlab.freedesktop.org/drm/intel/issues/6367
[i915#7359]: https://gitlab.freedesktop.org/drm/intel/issues/7359
[i915#7609]: https://gitlab.freedesktop.org/drm/intel/issues/7609
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#7977]: https://gitlab.freedesktop.org/drm/intel/issues/7977
[i915#7996]: https://gitlab.freedesktop.org/drm/intel/issues/7996

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7143 -> IGTPW_8433

CI-20190529: 20190529
CI_DRM_12681: 8ee2ec597aa4b8331124bf852432c2ca2fd7b8d1 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8433: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/index.html
IGT_7143: c7b12dcc460fc2348e1fa7f4dcb791bb82e29e44 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

Testlist changes
----------------

+igt@kms_dsc@dsc-with-output-formats +igt@kms_plane_alpha_blend@alpha-7efc +igt@kms_plane_alpha_blend@alpha-basic +igt@kms_plane_alpha_blend@alpha-opaque-fb +igt@kms_plane_alpha_blend@alpha-transparent-fb +igt@kms_plane_alpha_blend@constant-alpha-max +igt@kms_plane_alpha_blend@constant-alpha-mid +igt@kms_plane_alpha_blend@constant-alpha-min +igt@kms_plane_alpha_blend@coverage-7efc +igt@kms_plane_alpha_blend@coverage-vs-premult-vs-constant

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/index.html

Reviewed-by on the v2 series
#12 lore raw
In reply to Swati Sharma
Quoted 11 lines · Swati Sharma

This series is split from
https://patchwork.freedesktop.org/series/111342/

Initial dsc lib related changes got merged. Received review comments on driver debugfs YCBCR420 changes, to make debugfs entry generic so that all supported output formats can be validated.

In this series, review comments from above PW are addressed. Along, with that changes are done to make test generic to validate all supported dsc formats.

For the whole set:

Quoted 19 lines

Swati Sharma (6):
  lib/dsc: Fix return value
  tests/i915/kms_dsc: Add plane_format as struct data_t member tests/i915/kms_dsc: Remove pointless struct tests/i915/kms_dsc: Make bpc_list static
  lib/dsc: Add helpers for VDSC output format debugfs entry tests/i915/kms_dsc: Enable validation for VDSC output formats

 lib/igt_dsc.c               |  56 +++++++++++++++-
 lib/igt_dsc.h               |   5 ++
 lib/igt_kms.c               |  18 +++++
 lib/igt_kms.h               |   7 ++

 tests/i915/kms_dsc.c        | 128 ++++++++++++++++++++++++++-------- --
 tests/i915/kms_dsc_helper.c |  40 ++++++++++- tests/i915/kms_dsc_helper.h |   4 ++

 7 files changed, 218 insertions(+), 40 deletions(-)
#13 lore raw

Thanks for the review. Pushed 4/6 patches.

Quoted 37 lines · Jouni
Quoted 11 lines · Swati Sharma

This series is split from
https://patchwork.freedesktop.org/series/111342/

Initial dsc lib related changes got merged. Received review comments on driver debugfs YCBCR420 changes, to make debugfs entry generic so that all supported output formats can be validated.

In this series, review comments from above PW are addressed. Along, with that changes are done to make test generic to validate all supported dsc formats.

For the whole set:

Quoted 19 lines

Swati Sharma (6):
  lib/dsc: Fix return value
  tests/i915/kms_dsc: Add plane_format as struct data_t member tests/i915/kms_dsc: Remove pointless struct tests/i915/kms_dsc: Make bpc_list static
  lib/dsc: Add helpers for VDSC output format debugfs entry tests/i915/kms_dsc: Enable validation for VDSC output formats

  lib/igt_dsc.c               |  56 +++++++++++++++-
  lib/igt_dsc.h               |   5 ++
  lib/igt_kms.c               |  18 +++++
  lib/igt_kms.h               |   7 ++
  tests/i915/kms_dsc.c        | 128 ++++++++++++++++++++++++++--------
--
  tests/i915/kms_dsc_helper.c |  40 ++++++++++-
  tests/i915/kms_dsc_helper.h |   4 ++
  7 files changed, 218 insertions(+), 40 deletions(-)
Signature · 1 line
~Swati Sharma
#14 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for Enable VDSC output formats validation (rev2)

In reply to Swati Sharma
== Series Details ==

== Series Details ==

Series: Enable VDSC output formats validation (rev2)
URL : https://patchwork.freedesktop.org/series/113253/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_12681_full -> IGTPW_8433_full
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/index.html

Participating hosts (10 -> 10)
------------------------------

No changes in participating hosts

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_8433_full:

### IGT changes ###

#### Possible regressions ####

* {igt@kms_dsc@dsc-with-output-formats} (NEW):
- {shard-dg1}: NOTRUN -> [SKIP][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-dg1-12/igt@[email protected]
- {shard-tglu}: NOTRUN -> [SKIP][2]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-tglu-6/igt@[email protected]

New tests
---------

New tests have been introduced between CI_DRM_12681_full and IGTPW_8433_full:

### New IGT tests (1) ###

* igt@kms_dsc@dsc-with-output-formats:
- Statuses : 4 skip(s)
- Exec time: [0.0] s

Known issues
------------

Here are the changes found in IGTPW_8433_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-glk: [PASS][3] -> [FAIL][4] ([i915#2842]) +2 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-glk3/igt@gem_exec_fair@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-glk3/igt@gem_exec_fair@[email protected]

* {igt@kms_dsc@dsc-with-output-formats} (NEW):
- {shard-rkl}: NOTRUN -> [SKIP][5] ([i915#4098])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-4/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][6] ([fdo#109271])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-glk6/igt@[email protected]

* igt@kms_flip@2x-plain-flip-fb-recreate@ab-hdmi-a1-hdmi-a2:
- shard-glk: [PASS][7] -> [FAIL][8] ([i915#2122])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-glk4/igt@kms_flip@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-glk6/igt@kms_flip@[email protected]

#### Possible fixes ####

* igt@drm_fdinfo@idle@rcs0:
- {shard-rkl}: [FAIL][9] ([i915#7742]) -> [PASS][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-6/igt@drm_fdinfo@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-3/igt@drm_fdinfo@[email protected]

* igt@fbdev@info:
- {shard-rkl}: [SKIP][11] ([i915#2582]) -> [PASS][12] +1 similar issue
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-4/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-6/igt@[email protected]

* igt@gem_ctx_persistence@engines-hang@bcs0:
- {shard-rkl}: [SKIP][13] ([i915#6252]) -> [PASS][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-5/igt@gem_ctx_persistence@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-6/igt@gem_ctx_persistence@[email protected]

* igt@gem_eio@in-flight-suspend:
- {shard-rkl}: [FAIL][15] ([fdo#103375]) -> [PASS][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-3/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-5/igt@[email protected]

* igt@gem_exec_endless@dispatch@bcs0:
- {shard-rkl}: [SKIP][17] ([i915#6247]) -> [PASS][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-5/igt@gem_exec_endless@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-3/igt@gem_exec_endless@[email protected]

* igt@gem_exec_fair@basic-deadline:
- {shard-rkl}: [FAIL][19] ([i915#2846]) -> [PASS][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-1/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-1/igt@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- {shard-rkl}: [FAIL][21] ([i915#2842]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-4/igt@gem_exec_fair@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-5/igt@gem_exec_fair@[email protected]

* igt@gem_exec_reloc@basic-gtt-read-noreloc:
- {shard-rkl}: [SKIP][23] ([i915#3281]) -> [PASS][24] +15 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-3/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-5/igt@[email protected]

* igt@gem_mmap_wc@set-cache-level:
- {shard-rkl}: [SKIP][25] ([i915#1850]) -> [PASS][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-3/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-6/igt@[email protected]

* igt@gem_userptr_blits@forbidden-operations:
- {shard-rkl}: [SKIP][27] ([i915#3282]) -> [PASS][28] +3 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-4/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-5/igt@[email protected]

* igt@gen9_exec_parse@bb-start-out:
- {shard-rkl}: [SKIP][29] ([i915#2527]) -> [PASS][30] +1 similar issue
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-1/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-5/igt@[email protected]

* igt@i915_pm_rpm@drm-resources-equal:
- {shard-rkl}: [SKIP][31] ([fdo#109308]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-4/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-6/igt@[email protected]

* igt@i915_pm_sseu@full-enable:
- {shard-rkl}: [SKIP][33] ([i915#4387]) -> [PASS][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-6/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-5/igt@[email protected]

* igt@kms_big_fb@x-tiled-max-hw-stride-32bpp-rotate-180-async-flip:
- {shard-rkl}: [SKIP][35] ([i915#1845] / [i915#4098]) -> [PASS][36] +23 similar issues
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-2/igt@kms_big_fb@x-tiled-max-hw-stride-32bpp-rotate-180-async-flip.html
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-6/igt@kms_big_fb@x-tiled-max-hw-stride-32bpp-rotate-180-async-flip.html

* igt@kms_ccs@pipe-a-bad-pixel-format-y_tiled_gen12_rc_ccs:
- {shard-tglu}: [SKIP][37] ([i915#7651]) -> [PASS][38] +6 similar issues
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-tglu-6/igt@kms_ccs@pipe-a-bad-pixel-format-y_tiled_gen12_rc_ccs.html
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-tglu-2/igt@kms_ccs@pipe-a-bad-pixel-format-y_tiled_gen12_rc_ccs.html

* igt@kms_frontbuffer_tracking@fbc-shrfb-scaledprimary:
- {shard-rkl}: [SKIP][39] ([i915#1849] / [i915#4098]) -> [PASS][40] +9 similar issues
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-5/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-6/igt@[email protected]

* igt@kms_plane@pixel-format@pipe-b-planes:
- {shard-rkl}: [SKIP][41] ([i915#1849]) -> [PASS][42] +3 similar issues
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-4/igt@kms_plane@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-6/igt@kms_plane@[email protected]

* igt@kms_psr@primary_mmap_gtt:
- {shard-rkl}: [SKIP][43] ([i915#1072]) -> [PASS][44] +2 similar issues
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-5/igt@kms_psr@primary_mmap_gtt.html
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-6/igt@kms_psr@primary_mmap_gtt.html

* igt@kms_universal_plane@universal-plane-pipe-c-sanity:
- {shard-tglu}: [SKIP][45] ([fdo#109274]) -> [PASS][46] +1 similar issue
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-tglu-6/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-tglu-8/igt@[email protected]

* igt@perf_pmu@idle@rcs0:
- {shard-rkl}: [FAIL][47] ([i915#4349]) -> [PASS][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-4/igt@perf_pmu@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-5/igt@perf_pmu@[email protected]

* igt@prime_vgem@basic-read:
- {shard-rkl}: [SKIP][49] ([fdo#109295] / [i915#3291] / [i915#3708]) -> [PASS][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12681/shard-rkl-1/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/shard-rkl-5/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[IGT#2]: https://gitlab.freedesktop.org/drm/igt-gpu-tools/issues/2
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109283]: https://bugs.freedesktop.org/show_bug.cgi?id=109283
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109300]: https://bugs.freedesktop.org/show_bug.cgi?id=109300
[fdo#109303]: https://bugs.freedesktop.org/show_bug.cgi?id=109303
[fdo#109307]: https://bugs.freedesktop.org/show_bug.cgi?id=109307
[fdo#109308]: https://bugs.freedesktop.org/show_bug.cgi?id=109308
[fdo#109314]: https://bugs.freedesktop.org/show_bug.cgi?id=109314
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109506]: https://bugs.freedesktop.org/show_bug.cgi?id=109506
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#110723]: https://bugs.freedesktop.org/show_bug.cgi?id=110723
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111614]: https://bugs.freedesktop.org/show_bug.cgi?id=111614
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111644]: https://bugs.freedesktop.org/show_bug.cgi?id=111644
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[fdo#112054]: https://bugs.freedesktop.org/show_bug.cgi?id=112054
[fdo#112283]: https://bugs.freedesktop.org/show_bug.cgi?id=112283
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#1257]: https://gitlab.freedesktop.org/drm/intel/issues/1257
[i915#132]: https://gitlab.freedesktop.org/drm/intel/issues/132
[i915#1397]: https://gitlab.freedesktop.org/drm/intel/issues/1397
[i915#1722]: https://gitlab.freedesktop.org/drm/intel/issues/1722
[i915#1825]: https://gitlab.freedesktop.org/drm/intel/issues/1825
[i915#1839]: https://gitlab.freedesktop.org/drm/intel/issues/1839
[i915#1845]: https://gitlab.freedesktop.org/drm/intel/issues/1845
[i915#1849]: https://gitlab.freedesktop.org/drm/intel/issues/1849
[i915#1850]: https://gitlab.freedesktop.org/drm/intel/issues/1850
[i915#1902]: https://gitlab.freedesktop.org/drm/intel/issues/1902
[i915#2122]: https://gitlab.freedesktop.org/drm/intel/issues/2122
[i915#2437]: https://gitlab.freedesktop.org/drm/intel/issues/2437
[i915#2527]: https://gitlab.freedesktop.org/drm/intel/issues/2527
[i915#2575]: https://gitlab.freedesktop.org/drm/intel/issues/2575
[i915#2582]: https://gitlab.freedesktop.org/drm/intel/issues/2582
[i915#2587]: https://gitlab.freedesktop.org/drm/intel/issues/2587
[i915#2658]: https://gitlab.freedesktop.org/drm/intel/issues/2658
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#2705]: https://gitlab.freedesktop.org/drm/intel/issues/2705
[i915#280]: https://gitlab.freedesktop.org/drm/intel/issues/280
[i915#284]: https://gitlab.freedesktop.org/drm/intel/issues/284
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#2846]: https://gitlab.freedesktop.org/drm/intel/issues/2846
[i915#2856]: https://gitlab.freedesktop.org/drm/intel/issues/2856
[i915#2920]: https://gitlab.freedesktop.org/drm/intel/issues/2920
[i915#3116]: https://gitlab.freedesktop.org/drm/intel/issues/3116
[i915#315]: https://gitlab.freedesktop.org/drm/intel/issues/315
[i915#3281]: https://gitlab.freedesktop.org/drm/intel/issues/3281
[i915#3282]: https://gitlab.freedesktop.org/drm/intel/issues/3282
[i915#3291]: https://gitlab.freedesktop.org/drm/intel/issues/3291
[i915#3297]: https://gitlab.freedesktop.org/drm/intel/issues/3297
[i915#3299]: https://gitlab.freedesktop.org/drm/intel/issues/3299
[i915#3323]: https://gitlab.freedesktop.org/drm/intel/issues/3323
[i915#3359]: https://gitlab.freedesktop.org/drm/intel/issues/3359
[i915#3458]: https://gitlab.freedesktop.org/drm/intel/issues/3458
[i915#3469]: https://gitlab.freedesktop.org/drm/intel/issues/3469
[i915#3528]: https://gitlab.freedesktop.org/drm/intel/issues/3528
[i915#3539]: https://gitlab.freedesktop.org/drm/intel/issues/3539
[i915#3546]: https://gitlab.freedesktop.org/drm/intel/issues/3546
[i915#3547]: https://gitlab.freedesktop.org/drm/intel/issues/3547
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3558]: https://gitlab.freedesktop.org/drm/intel/issues/3558
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#3638]: https://gitlab.freedesktop.org/drm/intel/issues/3638
[i915#3689]: https://gitlab.freedesktop.org/drm/intel/issues/3689
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#3734]: https://gitlab.freedesktop.org/drm/intel/issues/3734
[i915#3742]: https://gitlab.freedesktop.org/drm/intel/issues/3742
[i915#3804]: https://gitlab.freedesktop.org/drm/intel/issues/3804
[i915#3840]: https://gitlab.freedesktop.org/drm/intel/issues/3840
[i915#3886]: https://gitlab.freedesktop.org/drm/intel/issues/3886
[i915#3936]: https://gitlab.freedesktop.org/drm/intel/issues/3936
[i915#3952]: https://gitlab.freedesktop.org/drm/intel/issues/3952
[i915#3955]: https://gitlab.freedesktop.org/drm/intel/issues/3955
[i915#4036]: https://gitlab.freedesktop.org/drm/intel/issues/4036
[i915#404]: https://gitlab.freedesktop.org/drm/intel/issues/404
[i915#4070]: https://gitlab.freedesktop.org/drm/intel/issues/4070
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4079]: https://gitlab.freedesktop.org/drm/intel/issues/4079
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4098]: https://gitlab.freedesktop.org/drm/intel/issues/4098
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4212]: https://gitlab.freedesktop.org/drm/intel/issues/4212
[i915#4270]: https://gitlab.freedesktop.org/drm/intel/issues/4270
[i915#4349]: https://gitlab.freedesktop.org/drm/intel/issues/4349
[i915#4387]: https://gitlab.freedesktop.org/drm/intel/issues/4387
[i915#4538]: https://gitlab.freedesktop.org/drm/intel/issues/4538
[i915#4565]: https://gitlab.freedesktop.org/drm/intel/issues/4565
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4767]: https://gitlab.freedesktop.org/drm/intel/issues/4767
[i915#4812]: https://gitlab.freedesktop.org/drm/intel/issues/4812
[i915#4833]: https://gitlab.freedesktop.org/drm/intel/issues/4833
[i915#4852]: https://gitlab.freedesktop.org/drm/intel/issues/4852
[i915#4859]: https://gitlab.freedesktop.org/drm/intel/issues/4859
[i915#4860]: https://gitlab.freedesktop.org/drm/intel/issues/4860
[i915#4877]: https://gitlab.freedesktop.org/drm/intel/issues/4877
[i915#4881]: https://gitlab.freedesktop.org/drm/intel/issues/4881
[i915#4885]: https://gitlab.freedesktop.org/drm/intel/issues/4885
[i915#5115]: https://gitlab.freedesktop.org/drm/intel/issues/5115
[i915#5176]: https://gitlab.freedesktop.org/drm/intel/issues/5176
[i915#5235]: https://gitlab.freedesktop.org/drm/intel/issues/5235
[i915#5286]: https://gitlab.freedesktop.org/drm/intel/issues/5286
[i915#5288]: https://gitlab.freedesktop.org/drm/intel/issues/5288
[i915#5289]: https://gitlab.freedesktop.org/drm/intel/issues/5289
[i915#5325]: https://gitlab.freedesktop.org/drm/intel/issues/5325
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533
[i915#5439]: https://gitlab.freedesktop.org/drm/intel/issues/5439
[i915#5461]: https://gitlab.freedesktop.org/drm/intel/issues/5461
[i915#5563]: https://gitlab.freedesktop.org/drm/intel/issues/5563
[i915#5723]: https://gitlab.freedesktop.org/drm/intel/issues/5723
[i915#5784]: https://gitlab.freedesktop.org/drm/intel/issues/5784
[i915#6095]: https://gitlab.freedesktop.org/drm/intel/issues/6095
[i915#6227]: https://gitlab.freedesktop.org/drm/intel/issues/6227
[i915#6247]: https://gitlab.freedesktop.org/drm/intel/issues/6247
[i915#6248]: https://gitlab.freedesktop.org/drm/intel/issues/6248
[i915#6252]: https://gitlab.freedesktop.org/drm/intel/issues/6252
[i915#6258]: https://gitlab.freedesktop.org/drm/intel/issues/6258
[i915#6301]: https://gitlab.freedesktop.org/drm/intel/issues/6301
[i915#6344]: https://gitlab.freedesktop.org/drm/intel/issues/6344
[i915#6355]: https://gitlab.freedesktop.org/drm/intel/issues/6355
[i915#6433]: https://gitlab.freedesktop.org/drm/intel/issues/6433
[i915#6493]: https://gitlab.freedesktop.org/drm/intel/issues/6493
[i915#6497]: https://gitlab.freedesktop.org/drm/intel/issues/6497
[i915#6524]: https://gitlab.freedesktop.org/drm/intel/issues/6524
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#6590]: https://gitlab.freedesktop.org/drm/intel/issues/6590
[i915#6768]: https://gitlab.freedesktop.org/drm/intel/issues/6768
[i915#6944]: https://gitlab.freedesktop.org/drm/intel/issues/6944
[i915#6946]: https://gitlab.freedesktop.org/drm/intel/issues/6946
[i915#6953]: https://gitlab.freedesktop.org/drm/intel/issues/6953
[i915#7052]: https://gitlab.freedesktop.org/drm/intel/issues/7052
[i915#7116]: https://gitlab.freedesktop.org/drm/intel/issues/7116
[i915#7118]: https://gitlab.freedesktop.org/drm/intel/issues/7118
[i915#7128]: https://gitlab.freedesktop.org/drm/intel/issues/7128
[i915#7178]: https://gitlab.freedesktop.org/drm/intel/issues/7178
[i915#7294]: https://gitlab.freedesktop.org/drm/intel/issues/7294
[i915#7330]: https://gitlab.freedesktop.org/drm/intel/issues/7330
[i915#7443]: https://gitlab.freedesktop.org/drm/intel/issues/7443
[i915#7561]: https://gitlab.freedesktop.org/drm/intel/issues/7561
[i915#7582]: https://gitlab.freedesktop.org/drm/intel/issues/7582
[i915#7651]: https://gitlab.freedesktop.org/drm/intel/issues/7651
[i915#7697]: https://gitlab.freedesktop.org/drm/intel/issues/7697
[i915#7701]: https://gitlab.freedesktop.org/drm/intel/issues/7701
[i915#7707]: https://gitlab.freedesktop.org/drm/intel/issues/7707
[i915#7711]: https://gitlab.freedesktop.org/drm/intel/issues/7711
[i915#7742]: https://gitlab.freedesktop.org/drm/intel/issues/7742
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#7949]: https://gitlab.freedesktop.org/drm/intel/issues/7949
[i915#7957]: https://gitlab.freedesktop.org/drm/intel/issues/7957
[i915#7984]: https://gitlab.freedesktop.org/drm/intel/issues/7984

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7143 -> IGTPW_8433

CI-20190529: 20190529
CI_DRM_12681: 8ee2ec597aa4b8331124bf852432c2ca2fd7b8d1 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8433: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/index.html
IGT_7143: c7b12dcc460fc2348e1fa7f4dcb791bb82e29e44 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8433/index.html