Skip to contentSkip to conversation

drv/usb: Fix the issue with Realtek USB wireless adapter AC650

PATCH In review tuhaowen 3 participants 3 messages Jun 25, 2024

Subsystems (2)
lore
Share & tools
lore

tuhaowen

author
#0 lore raw

PATCH 1/1 drv/usb: Fix the issue with Realtek USB wireless adapter AC650

Due to the dual-mode functionality of the Realtek USB wireless adapter AC650, it initially presents itself as a flash drive before the driver is installed.

In Linux, multi-state devices are recognized as storage devices on startup because the driver has not yet been loaded.

As a result, the AC650 is identified as a DISK device at boot, preventing the use of its WLAN mode. The issue can only be resolved by unplugging and replugging the adapter.

---
 drivers/usb/storage/unusual_devs.h | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/usb/storage/unusual_devs.h +6 -0
index fd68204374f2..f660d3e52436 100644
@@ -1487,6 +1487,12 @@ UNUSUAL_DEV( 0x0bc2, 0x3332, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
+UNUSUAL_DEV(0x0bda, 0x1a2b, 0x0000, 0x9999,
+		"Realtek",
+		"USB Network Device",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE),
+
 UNUSUAL_DEV(  0x0d49, 0x7310, 0x0000, 0x9999,
 		"Maxtor",
 		"USB to SATA",
Signature · 1 line
2.20.1
maintainer
#1 lore raw
Quoted 3 lines · tuhaowen

Due to the dual-mode functionality of the Realtek USB wireless adapter AC650, it initially presents itself as a flash drive before the driver is installed.

Does this flash-drive mode have a real purpose? For instance, can people upload new firmware by writing it to the flash drive? I can't imagine that the manufacturer would have implemented the dual-mode functionality for no reason at all.

Quoted 6 lines

In Linux, multi-state devices are recognized as storage devices on startup because the driver has not yet been loaded.

As a result, the AC650 is identified as a DISK device at boot, preventing the use of its WLAN mode. The issue can only be resolved by unplugging and replugging the adapter.

If there's no way to resolve this issue other than by unplugging and replugging the adapter, how can a patch help?

Are you sure that the problem can't be solved by a userspace helper, such as the usbmodeswitch program?

Alan Stern

Quoted 26 lines
---
 drivers/usb/storage/unusual_devs.h | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/usb/storage/unusual_devs.h +6 -0
index fd68204374f2..f660d3e52436 100644
@@ -1487,6 +1487,12 @@ UNUSUAL_DEV( 0x0bc2, 0x3332, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
+UNUSUAL_DEV(0x0bda, 0x1a2b, 0x0000, 0x9999,
+		"Realtek",
+		"USB Network Device",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE),
+
 UNUSUAL_DEV(  0x0d49, 0x7310, 0x0000, 0x9999,
 		"Maxtor",
 		"USB to SATA",
Signature · 1 line
2.20.1
#2 lore raw
In reply to tuhaowen
Quoted 11 lines · tuhaowen

Due to the dual-mode functionality of the Realtek USB wireless adapter AC650, it initially presents itself as a flash drive before the driver is installed.

In Linux, multi-state devices are recognized as storage devices on startup because the driver has not yet been loaded.

As a result, the AC650 is identified as a DISK device at boot, preventing the use of its WLAN mode. The issue can only be resolved by unplugging and replugging the adapter.

It can be resolved by manually ejecting the created cdrom drive or by using usb_modeswitch which will eject the drive as soon as it is detected. No need for unplugging/replugging.

thanks
Lars