Skip to contentSkip to conversation

Add basic SoC support for mediatek mt7986

PATCH Applied Sam Shih 2 participants 7 messages Nov 22, 2021 – Dec 16, 2021

Subsystems (2)
lore
Share & tools
lore

Sam Shih

author
#0 lore raw

v8 cover Add basic SoC support for mediatek mt7986

This patch adds basic SoC support for Mediatek's new 4-core SoC, MT7986, which is mainly for wifi-router application.

The MT7986 series includes mt7986a and mt7986b, The difference is that some pins do not exist on mt7986b (two pinctrls compatible string are required),

But the basic part of the device tree should be the same, So we only add mt7986a in this basic part patch series. We will separate mt7986a and mt7986b in the pinctrl patch series

---
v8: updated dts
v7: added memory node back to dts
v6: separate basic part into a single patch series

According to the maintainer’s suggestion, this patch splits the previous thread into independent patch series.
This patch include basic device support.

Original thread:
https://lore.kernel.org/all/[email protected]/

Sam Shih (2):
dt-bindings: arm64: dts: mediatek: Add mt7986 series
arm64: dts: mediatek: add basic mt7986 support

 .../devicetree/bindings/arm/mediatek.yaml     |   8 +
 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts  |  37 +++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi     | 148 ++++++++++++++++++
 4 files changed, 194 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi
Signature · 1 line
2.29.2
author
#1 lore raw

PATCH v8 1/2 dt-bindings: arm64: dts: mediatek: Add mt7986 series

MT7986 series is Mediatek's new 4-core SoC, which is mainly for wifi-router application. The difference between mt7986a and mt7986b is that some pins do not exist on mt7986b.

---
v6: separate basic part into a single patch series

Original thread:
https://lore.kernel.org/all/[email protected]/

v3: changed 'MT7986' to 'MT7986 series' in the commit message
v2: added an Acked-by tag

---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/arm/mediatek.yaml +8 -0
index 80a05f6fee85..a9a778269684 100644
@@ -76,6 +76,14 @@ properties:
           - enum:
               - mediatek,mt7629-rfb
           - const: mediatek,mt7629
+      - items:
+          - enum:
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
       - items:
           - enum:
               - mediatek,mt8127-moose
Signature · 1 line
2.29.2
maintainer Applied
#2 lore raw

Re: [PATCH v8 1/2] dt-bindings: arm64: dts: mediatek: Add mt7986 series

Quoted 7 lines · Sam Shih

MT7986 series is Mediatek's new 4-core SoC, which is mainly for wifi-router application. The difference between mt7986a and mt7986b is that some pins do not exist on mt7986b.

Applied to v5.16-next/dts64

Quoted 32 lines

---
v6: separate basic part into a single patch series

Original thread:
https://lore.kernel.org/all/[email protected]/

v3: changed 'MT7986' to 'MT7986 series' in the commit message
v2: added an Acked-by tag

---
  Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
  1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/arm/mediatek.yaml +8 -0
index 80a05f6fee85..a9a778269684 100644
@@ -76,6 +76,14 @@ properties:
            - enum:
                - mediatek,mt7629-rfb
            - const: mediatek,mt7629
+      - items:
+          - enum:
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
        - items:
            - enum:
                - mediatek,mt8127-moose
maintainer Applied
#3 lore raw

Re: [PATCH v8 1/2] dt-bindings: arm64: dts: mediatek: Add mt7986 series

In reply to Sam Shih
Quoted 7 lines · Sam Shih

MT7986 series is Mediatek's new 4-core SoC, which is mainly for wifi-router application. The difference between mt7986a and mt7986b is that some pins do not exist on mt7986b.

Applied to v5.16-next/dts64

Quoted 32 lines

---
v6: separate basic part into a single patch series

Original thread:
https://lore.kernel.org/all/[email protected]/

v3: changed 'MT7986' to 'MT7986 series' in the commit message
v2: added an Acked-by tag

---
  Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
  1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/arm/mediatek.yaml +8 -0
index 80a05f6fee85..a9a778269684 100644
@@ -76,6 +76,14 @@ properties:
            - enum:
                - mediatek,mt7629-rfb
            - const: mediatek,mt7629
+      - items:
+          - enum:
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
        - items:
            - enum:
                - mediatek,mt8127-moose
author
#4 lore raw

PATCH v8 2/2 arm64: dts: mediatek: add basic mt7986 support

In reply to Sam Shih

Add basic chip support for Mediatek mt7986, include basic uart nodes, rng node and watchdog node.

Add cpu node, timer node, gic node, psci and reserved-memory node for ARM Trusted Firmware.

---
v8: removed debug bootargs
v7: added memory node back to dts
v6: removed clock and pinctrl node, to separate basic part into a single
patch series

Original thread:
https://lore.kernel.org/all/[email protected]/

v5: follow reviewr's comment: removed clock freqency node in timer due to
we have set CNTFRQ_EL0 in ATF firmware, and also corrected GICD range
v4: added missing gic register bases, and fixed range of GICR
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated

---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  37 +++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 148 +++++++++++++++++++
 3 files changed, 186 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi
arch/arm64/boot/dts/mediatek/Makefile +1 -0
index 4f68ebed2e31..e6c3a73b9e4a 100644
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts new file +37 -0
new file mode 100644
index 000000000000..6911862390d7
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <[email protected]>
+ */
+
+/dts-v1/;
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	compatible = "mediatek,mt7986a-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
arch/arm64/boot/dts/mediatek/mt7986a.dtsi new file +148 -0

148 lines not on this page · raw message

Signature · 1 line
2.29.2
maintainer Applied
#5 lore raw

Re: [PATCH v8 2/2] arm64: dts: mediatek: add basic mt7986 support

Quoted 8 lines · Sam Shih

Add basic chip support for Mediatek mt7986, include basic uart nodes, rng node and watchdog node.

Add cpu node, timer node, gic node, psci and reserved-memory node for ARM Trusted Firmware.

Applied to v5.16-next/dts64

Thanks!

Quoted 232 lines

---
v8: removed debug bootargs
v7: added memory node back to dts
v6: removed clock and pinctrl node, to separate basic part into a single
patch series

Original thread:
https://lore.kernel.org/all/[email protected]/

v5: follow reviewr's comment: removed clock freqency node in timer due to
we have set CNTFRQ_EL0 in ATF firmware, and also corrected GICD range
v4: added missing gic register bases, and fixed range of GICR
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated

---
  arch/arm64/boot/dts/mediatek/Makefile        |   1 +
  arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  37 +++++
  arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 148 +++++++++++++++++++
  3 files changed, 186 insertions(+)

create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi

arch/arm64/boot/dts/mediatek/Makefile +1 -0
index 4f68ebed2e31..e6c3a73b9e4a 100644
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts new file +37 -0
new file mode 100644
index 000000000000..6911862390d7
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <[email protected]>
+ */
+
+/dts-v1/;
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	compatible = "mediatek,mt7986a-rfb";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
arch/arm64/boot/dts/mediatek/mt7986a.dtsi new file +148 -0
new file mode 100644
index 000000000000..77906839cc85
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <[email protected]>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	system_clk: dummy40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
+			      <0 0x0c080000 0 0x80000>,  /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&system_clk>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			status = "disabled";
+		};
+
+	};
+
+};
maintainer
#6 lore raw

Re: [PATCH v8 2/2] arm64: dts: mediatek: add basic mt7986 support

In reply to Sam Shih
Quoted 61 lines · Sam Shih

Add basic chip support for Mediatek mt7986, include basic uart nodes, rng node and watchdog node.

Add cpu node, timer node, gic node, psci and reserved-memory node for ARM Trusted Firmware.

---
v8: removed debug bootargs
v7: added memory node back to dts
v6: removed clock and pinctrl node, to separate basic part into a single
patch series

Original thread:
https://lore.kernel.org/all/[email protected]/

v5: follow reviewr's comment: removed clock freqency node in timer due to
we have set CNTFRQ_EL0 in ATF firmware, and also corrected GICD range
v4: added missing gic register bases, and fixed range of GICR
v3: used the stdout-path instead of console=ttyS0
v2: modified clock and uart node due to clock driver updated

---
  arch/arm64/boot/dts/mediatek/Makefile        |   1 +
  arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  37 +++++
  arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 148 +++++++++++++++++++
  3 files changed, 186 insertions(+)

create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi

arch/arm64/boot/dts/mediatek/Makefile +1 -0
index 4f68ebed2e31..e6c3a73b9e4a 100644
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts new file +13 -0
new file mode 100644
index 000000000000..6911862390d7
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <[email protected]>
+ */
+
+/dts-v1/;
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	compatible = "mediatek,mt7986a-rfb";
+

arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts line 23

Quoted 10 lines
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts new file +10 -0
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x40000000>;

Should be:

        memory@40000000 {

                device_type = "memory";

                reg = <0 0x40000000 0 0x40000000>;

        };

Please send a follow-up patch for that.

Regards,
Matthias

Quoted 169 lines
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts new file +14 -0
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
arch/arm64/boot/dts/mediatek/mt7986a.dtsi new file +148 -0
new file mode 100644
index 000000000000..77906839cc85
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <[email protected]>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	system_clk: dummy40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
+			      <0 0x0c080000 0 0x80000>,  /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&system_clk>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			status = "disabled";
+		};
+
+	};
+
+};