Skip to contentSkip to conversation

Drivers: hv: vmbus: Remove the per-CPU post_msg_page

PATCH Applied Dexuan Cui 4 participants 5 messages Apr 8, 2023 – Apr 13, 2023

Subsystems (2)
lore
Share & tools
lore

Dexuan Cui

author maintainer
#0 lore raw

PATCH 1/1 Drivers: hv: vmbus: Remove the per-CPU post_msg_page

The post_msg_page was introduced in 2014 in
commit b29ef3546aec ("Drivers: hv: vmbus: Cleanup hv_post_message()")

Commit 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments") introduced the hyperv_pcpu_input_arg in 2018, which can be used in hv_post_message().

Remove post_msg_page to simplify the code a little bit.

---
 drivers/hv/hv.c           | 20 +++++---------------
 drivers/hv/hyperv_vmbus.h |  4 ----
 2 files changed, 5 insertions(+), 19 deletions(-)
drivers/hv/hv.c +5 -15
index 8b0dd8e5244d7..30bf122a502ae 100644
@@ -84,14 +84,15 @@ int hv_post_message(union hv_connection_id connection_id,
 		  void *payload, size_t payload_size)
 {
 	struct hv_input_post_message *aligned_msg;
-	struct hv_per_cpu_context *hv_cpu;
+	unsigned long flags;
 	u64 status;
 
 	if (payload_size > HV_MESSAGE_PAYLOAD_BYTE_COUNT)
 		return -EMSGSIZE;
 
-	hv_cpu = get_cpu_ptr(hv_context.cpu_context);
-	aligned_msg = hv_cpu->post_msg_page;
+	local_irq_save(flags);
+
+	aligned_msg = *this_cpu_ptr(hyperv_pcpu_input_arg);
 	aligned_msg->connectionid = connection_id;
 	aligned_msg->reserved = 0;
 	aligned_msg->message_type = message_type;
@@ -106,11 +107,7 @@ int hv_post_message(union hv_connection_id connection_id,
 		status = hv_do_hypercall(HVCALL_POST_MESSAGE,
 				aligned_msg, NULL);
 
-	/* Preemption must remain disabled until after the hypercall
-	 * so some other thread can't get scheduled onto this cpu and
-	 * corrupt the per-cpu post_msg_page
-	 */
-	put_cpu_ptr(hv_cpu);
+	local_irq_restore(flags);
 
 	return hv_result(status);
 }
@@ -162,12 +159,6 @@ int hv_synic_alloc(void)
 				goto err;
 			}
 		}
-
-		hv_cpu->post_msg_page = (void *)get_zeroed_page(GFP_ATOMIC);
-		if (hv_cpu->post_msg_page == NULL) {
-			pr_err("Unable to allocate post msg page\n");
-			goto err;
-		}
 	}
 
 	return 0;
@@ -190,7 +181,6 @@ void hv_synic_free(void)
 
 		free_page((unsigned long)hv_cpu->synic_event_page);
 		free_page((unsigned long)hv_cpu->synic_message_page);
-		free_page((unsigned long)hv_cpu->post_msg_page);
 	}
 
 	kfree(hv_context.hv_numa_map);
drivers/hv/hyperv_vmbus.h +0 -4
index dc673edf053c3..d8322049ecd08 100644
@@ -122,10 +122,6 @@ enum {
 struct hv_per_cpu_context {
 	void *synic_message_page;
 	void *synic_event_page;
-	/*
-	 * buffer to post messages to the host.
-	 */
-	void *post_msg_page;
 
 	/*
 	 * Starting with win8, we can take channel interrupts on any CPU;
Signature · 1 line
2.25.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 86 lines · Dexuan Cui

The post_msg_page was introduced in 2014 in
commit b29ef3546aec ("Drivers: hv: vmbus: Cleanup hv_post_message()")

Commit 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments") introduced the hyperv_pcpu_input_arg in 2018, which can be used in hv_post_message().

Remove post_msg_page to simplify the code a little bit.

---
  drivers/hv/hv.c           | 20 +++++---------------
  drivers/hv/hyperv_vmbus.h |  4 ----
  2 files changed, 5 insertions(+), 19 deletions(-)
drivers/hv/hv.c +5 -15
index 8b0dd8e5244d7..30bf122a502ae 100644
@@ -84,14 +84,15 @@ int hv_post_message(union hv_connection_id connection_id,
  		  void *payload, size_t payload_size)
  {
  	struct hv_input_post_message *aligned_msg;
-	struct hv_per_cpu_context *hv_cpu;
+	unsigned long flags;
  	u64 status;
 
  	if (payload_size > HV_MESSAGE_PAYLOAD_BYTE_COUNT)
  		return -EMSGSIZE;
 
-	hv_cpu = get_cpu_ptr(hv_context.cpu_context);
-	aligned_msg = hv_cpu->post_msg_page;
+	local_irq_save(flags);
+
+	aligned_msg = *this_cpu_ptr(hyperv_pcpu_input_arg);
  	aligned_msg->connectionid = connection_id;
  	aligned_msg->reserved = 0;
  	aligned_msg->message_type = message_type;
@@ -106,11 +107,7 @@ int hv_post_message(union hv_connection_id connection_id,
  		status = hv_do_hypercall(HVCALL_POST_MESSAGE,
  				aligned_msg, NULL);
 
-	/* Preemption must remain disabled until after the hypercall
-	 * so some other thread can't get scheduled onto this cpu and
-	 * corrupt the per-cpu post_msg_page
-	 */
-	put_cpu_ptr(hv_cpu);
+	local_irq_restore(flags);
 
  	return hv_result(status);
  }
@@ -162,12 +159,6 @@ int hv_synic_alloc(void)
  				goto err;
  			}
  		}
-
-		hv_cpu->post_msg_page = (void *)get_zeroed_page(GFP_ATOMIC);
-		if (hv_cpu->post_msg_page == NULL) {
-			pr_err("Unable to allocate post msg page\n");
-			goto err;
-		}
  	}
 
  	return 0;
@@ -190,7 +181,6 @@ void hv_synic_free(void)
 
  		free_page((unsigned long)hv_cpu->synic_event_page);
  		free_page((unsigned long)hv_cpu->synic_message_page);
-		free_page((unsigned long)hv_cpu->post_msg_page);
  	}
 
  	kfree(hv_context.hv_numa_map);
drivers/hv/hyperv_vmbus.h +0 -4
index dc673edf053c3..d8322049ecd08 100644
@@ -122,10 +122,6 @@ enum {
  struct hv_per_cpu_context {
  	void *synic_message_page;
  	void *synic_event_page;
-	/*
-	 * buffer to post messages to the host.
-	 */
-	void *post_msg_page;
 
  	/*
  	 * Starting with win8, we can take channel interrupts on any CPU;
Reviewed-by Michael Kelley on v1 1/1
#2 lore raw
In reply to Dexuan Cui

From: Dexuan Cui <[email protected]> Sent: Saturday, April 8, 2023 2:35 PM

Quoted 88 lines

The post_msg_page was introduced in 2014 in
commit b29ef3546aec ("Drivers: hv: vmbus: Cleanup hv_post_message()")

Commit 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments") introduced the hyperv_pcpu_input_arg in 2018, which can be used in hv_post_message().

Remove post_msg_page to simplify the code a little bit.

---
 drivers/hv/hv.c           | 20 +++++---------------
 drivers/hv/hyperv_vmbus.h |  4 ----
 2 files changed, 5 insertions(+), 19 deletions(-)
drivers/hv/hv.c +5 -15
index 8b0dd8e5244d7..30bf122a502ae 100644
@@ -84,14 +84,15 @@ int hv_post_message(union hv_connection_id connection_id,
 		  void *payload, size_t payload_size)
 {
 	struct hv_input_post_message *aligned_msg;
-	struct hv_per_cpu_context *hv_cpu;
+	unsigned long flags;
 	u64 status;
 
 	if (payload_size > HV_MESSAGE_PAYLOAD_BYTE_COUNT)
 		return -EMSGSIZE;
 
-	hv_cpu = get_cpu_ptr(hv_context.cpu_context);
-	aligned_msg = hv_cpu->post_msg_page;
+	local_irq_save(flags);
+
+	aligned_msg = *this_cpu_ptr(hyperv_pcpu_input_arg);
 	aligned_msg->connectionid = connection_id;
 	aligned_msg->reserved = 0;
 	aligned_msg->message_type = message_type;
@@ -106,11 +107,7 @@ int hv_post_message(union hv_connection_id connection_id,
 		status = hv_do_hypercall(HVCALL_POST_MESSAGE,
 				aligned_msg, NULL);
 
-	/* Preemption must remain disabled until after the hypercall
-	 * so some other thread can't get scheduled onto this cpu and
-	 * corrupt the per-cpu post_msg_page
-	 */
-	put_cpu_ptr(hv_cpu);
+	local_irq_restore(flags);
 
 	return hv_result(status);
 }
@@ -162,12 +159,6 @@ int hv_synic_alloc(void)
 				goto err;
 			}
 		}
-
-		hv_cpu->post_msg_page = (void *)get_zeroed_page(GFP_ATOMIC);
-		if (hv_cpu->post_msg_page == NULL) {
-			pr_err("Unable to allocate post msg page\n");
-			goto err;
-		}
 	}
 
 	return 0;
@@ -190,7 +181,6 @@ void hv_synic_free(void)
 
 		free_page((unsigned long)hv_cpu->synic_event_page);
 		free_page((unsigned long)hv_cpu->synic_message_page);
-		free_page((unsigned long)hv_cpu->post_msg_page);
 	}
 
 	kfree(hv_context.hv_numa_map);
drivers/hv/hyperv_vmbus.h +0 -5
index dc673edf053c3..d8322049ecd08 100644
@@ -122,10 +122,6 @@ enum {
 struct hv_per_cpu_context {
 	void *synic_message_page;
 	void *synic_event_page;
-	/*
-	 * buffer to post messages to the host.
-	 */
-	void *post_msg_page;
 
 	/*
 	 * Starting with win8, we can take channel interrupts on any CPU;
--
Quoted 1 line

2.25.1

This looks good. Glad to have this simplification done!

FWIW, this patch will cause conflicts with your TDX patch series. If this patch goes first, then you'll have merge errors with the TDX patches. If the TDX series goes first, then this patch will have merge errors. And per my comments on Patch 5 of your TDX series, eliminating the post_msg_page will simplify the error cleanup code in hv_synic_alloc(). It seems like making this patch part of the TDX series would be helpful all around.

Reviewed-by Michael Kelley
maintainer
#3 lore raw
Quoted 5 lines · Michael Kelley (LINUX)
Quoted 2 lines

--
2.25.1

This looks good. Glad to have this simplification done!

Quoted 7 lines

FWIW, this patch will cause conflicts with your TDX patch series. If this patch goes first, then you'll have merge errors with the TDX patches. If the TDX series goes first, then this patch will have merge errors. And per my comments on Patch 5 of your TDX series, eliminating the post_msg_page will simplify the error cleanup code in hv_synic_alloc(). It seems like making this patch part of the TDX series would be helpful all around.

Seeing that there are pending comments in the TDX series, I've applied this patch. TDX series can be rebased.

Thanks,
Wei.

maintainer Applied
#4 lore raw
In reply to Dexuan Cui
Quoted 9 lines · Dexuan Cui

The post_msg_page was introduced in 2014 in
commit b29ef3546aec ("Drivers: hv: vmbus: Cleanup hv_post_message()")

Commit 68bb7bfb7985 ("X86/Hyper-V: Enable IPI enlightenments") introduced the hyperv_pcpu_input_arg in 2018, which can be used in hv_post_message().

Remove post_msg_page to simplify the code a little bit.

Applied to hyperv-next.