MFD maintainer
PATCH 1/1 MFD maintainer
Hi,
We probably need someone to look after the few drivers/mfd patches coming every now and then. As agreed with Andrew, I'm ok to do so and my employer is fine with me spending a few working hours on it, if needed. Ben, Philipp, feel free to add your names there too if you wish.
--
MAINTAINERS | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
MAINTAINERS +6 -0
@@ -2814,6 +2814,12 @@ W: https://tango.0pointer.de/mailman/listinfo/s270-linux W: http://0pointer.de/lennart/tchibo.html S: Maintained +MULTIFUNCTION DEVICES (MFD) +P: Samuel Ortiz +M: [email protected] +L: [email protected] +S: Supported + MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM P: Pierre Ossman M: [email protected]
Added Ian, Dmitry and Russell to Cc.
Quoted 5 lines · Samuel Ortiz
Hi,
We probably need someone to look after the few
drivers/mfdpatches coming every now and then. As agreed with Andrew, I'm ok to do so and my employer is fine with me spending a few working hours on it, if needed.
Right now quite some of the MFD patches go through arm-kernel, but I guess once that initial rush of ARM machine patches depending on MFD patches submitted at the same time is over, it's a very good idea to have a proper path into the kernel.
regards
Philipp
Quoted 24 lines
Signed-off-by Samuel Ortiz <[email protected]>--
MAINTAINERS | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)MAINTAINERS +6
-0@@ -2814,6 +2814,12 @@ W: https://tango.0pointer.de/mailman/listinfo/s270-linux W: http://0pointer.de/lennart/tchibo.html S: Maintained +MULTIFUNCTION DEVICES (MFD) +P: Samuel Ortiz +M: [email protected] +L: [email protected] +S: Supported + MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM P: Pierre Ossman M: [email protected]
Hi guys!
Good timing! I just sat down with the e-series code last night!
I'd like to see the MFD core make it into mainline, and then we can start pushing the TMIO drivers too.
These drivers are in a LOT of handhelds and I'd really like to see the code move to mainline now.
The code is maturing well - I just bumped all the eseries stuff, which includes the core MFD code and all the TMIO drivers from 2.6.24 to 2.6.26-git and the only issue was some minor #include breakage.
I'll tidy up the code and pop a branch on my git server for people to review, if thats what people want.
Dmitry - if you have any pending patches now is the time to send them on over ;-)
-Ian
Quoted 13 lines · pHilipp Zabel
Added Ian, Dmitry and Russell to Cc.
Quoted 5 lines · Samuel Ortiz
Hi,
We probably need someone to look after the few
drivers/mfdpatches coming every now and then. As agreed with Andrew, I'm ok to do so and my employer is fine with me spending a few working hours on it, if needed.Right now quite some of the MFD patches go through arm-kernel, but I guess once that initial rush of ARM machine patches depending on MFD patches submitted at the same time is over, it's a very good idea to have a proper path into the kernel.
Hi,
2008/6/19 ian <[email protected]>:
Quoted 10 lines
Hi guys!
Good timing! I just sat down with the e-series code last night!
I'd like to see the MFD core make it into mainline, and then we can start pushing the TMIO drivers too.
These drivers are in a LOT of handhelds and I'd really like to see the code move to mainline now.
Quoted 6 lines
The code is maturing well - I just bumped all the eseries stuff, which includes the core MFD code and all the TMIO drivers from 2.6.24 to 2.6.26-git and the only issue was some minor #include breakage.
I'll tidy up the code and pop a branch on my git server for people to review, if thats what people want.
It's better to send patches to some ML.
Quoted 3 lines
Dmitry - if you have any pending patches now is the time to send them on over ;-)
Actually the code I'm using has diverged a bit from the last code I've sent before this merging pulse.
As you have seen, I've tried to submit parts of the core and tmio-nand driver as a start. Then I'd suggest
to merge other tmio core bits (support for tc6387xb and t7l66xb). The MMC, usb and fb cell drivers could
benefit from clocklib patches I'm trying to get in. I'll submit the updated version of mfd-core patch this evening,
however some other bits will require more time from my side.
Quoted 17 lines
-Ian
Quoted 13 lines · pHilipp Zabel
Added Ian, Dmitry and Russell to Cc.
Quoted 5 lines · Samuel Ortiz
Hi,
We probably need someone to look after the few
drivers/mfdpatches coming every now and then. As agreed with Andrew, I'm ok to do so and my employer is fine with me spending a few working hours on it, if needed.Right now quite some of the MFD patches go through arm-kernel, but I guess once that initial rush of ARM machine patches depending on MFD patches submitted at the same time is over, it's a very good idea to have a proper path into the kernel.
Yeah!
Signature · 2 lines
With best wishes Dmitry
Quoted 4 lines · Dmitry
Quoted 2 lines
I'll tidy up the code and pop a branch on my git server for people to review, if thats what people want.
It's better to send patches to some ML.
Well, the code I had is updated to match linus -git branch eseries_release7 if anyones curious. (no real changes since last time though)
Quoted 5 lines
Quoted 2 lines
Dmitry - if you have any pending patches now is the time to send them on over ;-)
Actually the code I'm using has diverged a bit from the last code I've sent before this merging pulse.
All progress is good :)
Quoted 2 lines
As you have seen, I've tried to submit parts of the core and tmio-nand driver as a start.
Has any of that got merged yet? If so, I'll adapt my strategy to match that, otherwise I'll try to keep all the drivers in parallel.
Quoted 3 lines
Then I'd suggest to merge other tmio core bits (support for tc6387xb and t7l66xb). The MMC, usb and fb cell drivers could benefit from clocklib patches I'm trying to get in.
I'd like to see those. I'll get MMC and USB updated ASAP.
have you solved the clock-api-tied-to-platform-architecture problem ?
Quoted 1 line
I'll submit the updated version of mfd-core patch this evening,
Looking forward to it.
Quoted 1 line
however some other bits will require more time from my side.
Lets rock :-)
Hi,
2008/6/19 ian <[email protected]>:
Quoted 25 lines · Dmitry
Quoted 5 lines
Quoted 3 lines
I'll tidy up the code and pop a branch on my git server for people to review, if thats what people want.
It's better to send patches to some ML.
Well, the code I had is updated to match linus -git branch
eseries_release7if anyones curious. (no real changes since last time though)Quoted 5 lines
Quoted 2 lines
Dmitry - if you have any pending patches now is the time to send them on over ;-)
Actually the code I'm using has diverged a bit from the last code I've sent before this merging pulse.
All progress is good :)
Quoted 2 lines
As you have seen, I've tried to submit parts of the core and tmio-nand driver as a start.
Has any of that got merged yet? If so, I'll adapt my strategy to match that, otherwise I'll try to keep all the drivers in parallel.
Quoted 7 lines
Quoted 3 lines
Then I'd suggest to merge other tmio core bits (support for tc6387xb and t7l66xb). The MMC, usb and fb cell drivers could benefit from clocklib patches I'm trying to get in.
I'd like to see those. I'll get MMC and USB updated ASAP.
have you solved the clock-api-tied-to-platform-architecture problem ?
There were plenty of tries to merge clocklib. Check lkml archives.
Quoted 4 lines
Quoted 2 lines
I'll submit the updated version of mfd-core patch this evening,
Looking forward to it.
you should have received it.
Quoted 3 lines
Quoted 1 line
however some other bits will require more time from my side.
Lets rock :-)
Signature · 2 lines
With best wishes Dmitry
Quoted 32 lines · Dmitry
Hi,
2008/6/19 ian <[email protected]>:
Quoted 29 lines · Dmitry
Quoted 5 lines
Quoted 3 lines
I'll tidy up the code and pop a branch on my git server for people to review, if thats what people want.
It's better to send patches to some ML.
Well, the code I had is updated to match linus -git branch
eseries_release7if anyones curious. (no real changes since last time though)Quoted 5 lines
Quoted 2 lines
Dmitry - if you have any pending patches now is the time to send them on over ;-)
Actually the code I'm using has diverged a bit from the last code I've sent before this merging pulse.
All progress is good :)
Quoted 2 lines
As you have seen, I've tried to submit parts of the core and tmio-nand driver as a start.
Has any of that got merged yet? If so, I'll adapt my strategy to match that, otherwise I'll try to keep all the drivers in parallel.
Quoted 3 lines
Then I'd suggest to merge other tmio core bits (support for tc6387xb and t7l66xb). The MMC, usb and fb cell drivers could benefit from clocklib patches I'm trying to get in.
Quoted 5 lines
Quoted 3 lines
I'd like to see those. I'll get MMC and USB updated ASAP.
have you solved the clock-api-tied-to-platform-architecture problem ?
There were plenty of tries to merge clocklib. Check lkml archives.
How could we stir up some interest in those patches again? The last round didn't receive any comments.
regards
Philipp
2008/6/19 pHilipp Zabel <[email protected]>:
Quoted 33 lines · Dmitry
Quoted 32 lines
Hi,
2008/6/19 ian <[email protected]>:
Quoted 29 lines · Dmitry
Quoted 5 lines
Quoted 3 lines
I'll tidy up the code and pop a branch on my git server for people to review, if thats what people want.
It's better to send patches to some ML.
Well, the code I had is updated to match linus -git branch
eseries_release7if anyones curious. (no real changes since last time though)Quoted 5 lines
Quoted 2 lines
Dmitry - if you have any pending patches now is the time to send them on over ;-)
Actually the code I'm using has diverged a bit from the last code I've sent before this merging pulse.
All progress is good :)
Quoted 2 lines
As you have seen, I've tried to submit parts of the core and tmio-nand driver as a start.
Has any of that got merged yet? If so, I'll adapt my strategy to match that, otherwise I'll try to keep all the drivers in parallel.
Quoted 3 lines
Then I'd suggest to merge other tmio core bits (support for tc6387xb and t7l66xb). The MMC, usb and fb cell drivers could benefit from clocklib patches I'm trying to get in.
Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
I'd like to see those. I'll get MMC and USB updated ASAP.
have you solved the clock-api-tied-to-platform-architecture problem ?
There were plenty of tries to merge clocklib. Check lkml archives.
How could we stir up some interest in those patches again? The last round didn't receive any comments.
I don't know :( Maybe I shoud give up the idea of using kobjects, switch back to kref and do a partial merge of those two patchset branches. I'll think about it this weekend.
Signature · 2 lines
With best wishes Dmitry
Quoted 4 lines · pHilipp Zabel
Quoted 1 line
There were plenty of tries to merge clocklib. Check lkml archives.
How could we stir up some interest in those patches again? The last round didn't receive any comments.
I dont know how either.
I really like this approach though and think we should persevere...
Quoted 22 lines · ian
Quoted 4 lines · Dmitry
Quoted 2 lines
I'll tidy up the code and pop a branch on my git server for people to review, if thats what people want.
It's better to send patches to some ML.
Well, the code I had is updated to match linus -git branch
eseries_release7if anyones curious. (no real changes since last time though)Quoted 5 lines
Quoted 2 lines
Dmitry - if you have any pending patches now is the time to send them on over ;-)
Actually the code I'm using has diverged a bit from the last code I've sent before this merging pulse.
All progress is good :)
Quoted 2 lines
As you have seen, I've tried to submit parts of the core and tmio-nand driver as a start.
Quoted 8 lines
Has any of that got merged yet? If so, I'll adapt my strategy to match that, otherwise I'll try to keep all the drivers in parallel.
Quoted 3 lines
Then I'd suggest to merge other tmio core bits (support for tc6387xb and t7l66xb). The MMC, usb and fb cell drivers could benefit from clocklib patches I'm trying to get in.
I'd like to see those. I'll get MMC and USB updated ASAP.
That is interesting. I just asked Samuel about the ASIC3 MMC code which Aric copied from tc6393xb. It seems we should try to reuse the tmio driver itself for ASIC3?
Quoted 9 lines
have you solved the clock-api-tied-to-platform-architecture problem ?
Quoted 1 line
I'll submit the updated version of mfd-core patch this evening,
Looking forward to it.
Quoted 1 line
however some other bits will require more time from my side.
Lets rock :-)
regards
Philipp
Hi,
2008/6/19 pHilipp Zabel <[email protected]>:
Quoted 30 lines · ian
Quoted 29 lines · Dmitry
Quoted 5 lines
Quoted 3 lines
I'll tidy up the code and pop a branch on my git server for people to review, if thats what people want.
It's better to send patches to some ML.
Well, the code I had is updated to match linus -git branch
eseries_release7if anyones curious. (no real changes since last time though)Quoted 5 lines
Quoted 2 lines
Dmitry - if you have any pending patches now is the time to send them on over ;-)
Actually the code I'm using has diverged a bit from the last code I've sent before this merging pulse.
All progress is good :)
Quoted 2 lines
As you have seen, I've tried to submit parts of the core and tmio-nand driver as a start.
Has any of that got merged yet? If so, I'll adapt my strategy to match that, otherwise I'll try to keep all the drivers in parallel.
Quoted 3 lines
Then I'd suggest to merge other tmio core bits (support for tc6387xb and t7l66xb). The MMC, usb and fb cell drivers could benefit from clocklib patches I'm trying to get in.
Quoted 5 lines
Quoted 1 line
I'd like to see those. I'll get MMC and USB updated ASAP.
That is interesting. I just asked Samuel about the ASIC3 MMC code which Aric copied from tc6393xb. It seems we should try to reuse the tmio driver itself for ASIC3?
That was also one of the goals for the tmio cell drivers. However merging ASIC3 support will require some hacking around address shifts for the cell.
Quoted 14 lines
Quoted 10 lines
have you solved the clock-api-tied-to-platform-architecture problem ?
Quoted 1 line
I'll submit the updated version of mfd-core patch this evening,
Looking forward to it.
Quoted 1 line
however some other bits will require more time from my side.
Lets rock :-)
regards
Philipp
Signature · 2 lines
With best wishes Dmitry