ice: add TTY for GNSS module for E810T device
Subsystems (2)
PATCH v3 1/1 ice: add TTY for GNSS module for E810T device
Add a new ice_gnss.c file for holding the basic GNSS module functions. If the device supports GNSS module, call the new ice_gnss_init and ice_gnss_release functions where appropriate.
Implement basic functionality for reading the data from GNSS module using TTY device.
Add I2C read AQ command. It is now required for controlling the external physical connectors via external I2C port expander on E810-T adapters.
Future changes will introduce write functionality.
---
V1 -> V2: Added CONFIG_TTY dependency
V2 -> V3: Removed unnecessary & on pf->hw pointer check
drivers/net/ethernet/intel/ice/Makefile | 1 + drivers/net/ethernet/intel/ice/ice.h | 6 + .../net/ethernet/intel/ice/ice_adminq_cmd.h | 21 + drivers/net/ethernet/intel/ice/ice_common.c | 53 +++ drivers/net/ethernet/intel/ice/ice_common.h | 3 + drivers/net/ethernet/intel/ice/ice_gnss.c | 376 ++++++++++++++++++ drivers/net/ethernet/intel/ice/ice_gnss.h | 51 +++ drivers/net/ethernet/intel/ice/ice_lib.c | 5 +- drivers/net/ethernet/intel/ice/ice_main.c | 11 + drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 31 ++ drivers/net/ethernet/intel/ice/ice_ptp_hw.h | 7 + 11 files changed, 564 insertions(+), 1 deletion(-) create mode 100644 drivers/net/ethernet/intel/ice/ice_gnss.c create mode 100644 drivers/net/ethernet/intel/ice/ice_gnss.h
drivers/net/ethernet/intel/ice/Makefile +1 -0
@@ -32,6 +32,7 @@ ice-y := ice_main.o \ ice-$(CONFIG_PCI_IOV) += ice_virtchnl_allowlist.o ice-$(CONFIG_PCI_IOV) += ice_virtchnl_pf.o ice_sriov.o ice_virtchnl_fdir.o ice-$(CONFIG_PTP_1588_CLOCK) += ice_ptp.o ice_ptp_hw.o +ice-$(CONFIG_TTY) += ice_gnss.o ice-$(CONFIG_DCB) += ice_dcb.o ice_dcb_nl.o ice_dcb_lib.o ice-$(CONFIG_RFS_ACCEL) += ice_arfs.o ice-$(CONFIG_XDP_SOCKETS) += ice_xsk.o
drivers/net/ethernet/intel/ice/ice.h +6 -0
@@ -72,6 +72,7 @@#include "ice_repr.h" #include "ice_eswitch.h" #include "ice_lag.h" +#include "ice_gnss.h" #define ICE_BAR0 0#define ICE_REQ_DESC_MULTIPLE 32
@@ -184,6 +185,7 @@enum ice_feature {ICE_F_DSCP ,ICE_F_SMA_CTRL , +ICE_F_GNSS ,ICE_F_MAX };
@@ -482,6 +484,7 @@ enum ice_pf_flags {ICE_FLAG_VF_TRUE_PROMISC_ENA ,ICE_FLAG_MDD_AUTO_RESET_VF ,ICE_FLAG_LINK_LENIENT_MODE_ENA , +ICE_FLAG_GNSS ,/* GNSS successfully initialized */ ICE_PF_FLAGS_NBITS /* must be last */ };
@@ -545,6 +548,9 @@ struct ice_pf {struct mutex tc_mutex;/* lock to protect TC changes */ u32 msg_enable;struct ice_ptp ptp; +struct tty_driver *ice_gnss_tty_driver; +struct tty_port gnss_tty_port; +struct gnss_serial *gnss_serial;u16 num_rdma_msix;/* Total MSIX vectors for RDMA driver */ u16 rdma_base_vector;
drivers/net/ethernet/intel/ice/ice_adminq_cmd.h +21 -0
@@ -1339,6 +1339,24 @@ struct ice_aqc_get_link_topo {u8 rsvd[9 ]; }; +/* Read I2C (direct, 0x06E2) */ +struct ice_aqc_i2c { +struct ice_aqc_link_topo_addr topo_addr; +__le16 i2c_addr; +u8 i2c_params; +#define ICE_AQC_I2C_DATA_SIZE_S 0 +#define ICE_AQC_I2C_DATA_SIZE_M (0xF << ICE_AQC_I2C_DATA_SIZE_S) +#define ICE_AQC_I2C_USE_REPEATED_START BIT(7) +u8 rsvd; +__le16 i2c_bus_addr; +u8 rsvd2[4 ]; +}; + +/* Read I2C Response (direct, 0x06E2) */ +struct ice_aqc_read_i2c_resp { +u8 i2c_data[16 ]; +}; +/* Set Port Identification LED (direct, 0x06E9) */ struct ice_aqc_set_port_id_led {u8 lport_num;
@@ -2049,6 +2067,8 @@ struct ice_aq_desc {struct ice_aqc_get_link_status get_link_status;struct ice_aqc_event_lan_overflow lan_overflow;struct ice_aqc_get_link_topo get_link_topo; +struct ice_aqc_i2c read_i2c; +struct ice_aqc_read_i2c_resp read_i2c_resp; } params; };
@@ -2160,6 +2180,7 @@ enum ice_adminq_opc { ice_aqc_opc_set_event_mask =0x0613 , ice_aqc_opc_set_mac_lb =0x0620 , ice_aqc_opc_get_link_topo =0x06E0 , + ice_aqc_opc_read_i2c =0x06E2 , ice_aqc_opc_set_port_id_led =0x06E9 , ice_aqc_opc_set_gpio =0x06EC , ice_aqc_opc_get_gpio = 0x06ED,
drivers/net/ethernet/intel/ice/ice_common.c +53 -0
59 lines not on this page · raw message
drivers/net/ethernet/intel/ice/ice_common.h +3 -0
@@ -205,5 +205,8 @@ ice_aq_set_lldp_mib(struct ice_hw *hw, u8 mib_type, void *buf, u16 buf_size,bool ice_fw_supports_lldp_fltr_ctrl (struct ice_hw *hw);int ice_lldp_fltr_add_remove (struct ice_hw *hw,u16 vsi_num,bool add); +int ice_aq_read_i2c (struct ice_hw *hw,struct ice_aqc_link_topo_addr topo_addr, +u16 bus_addr,__le16 addr,u8 params,u8 *data, +struct ice_sq_cd *cd);bool ice_fw_supports_report_dflt_cfg (struct ice_hw *hw);#endif /* _ICE_COMMON_H_ */
drivers/net/ethernet/intel/ice/ice_gnss.c new file +376 -0
376 lines not on this page · raw message
drivers/net/ethernet/intel/ice/ice_gnss.h new file +51 -0
51 lines not on this page · raw message
drivers/net/ethernet/intel/ice/ice_lib.c +4 -1
@@ -4142,8 +4142,11 @@ void ice_init_feature_support(struct ice_pf *pf)case ICE_DEV_ID_E810C_QSFP :case ICE_DEV_ID_E810C_SFP :ice_set_feature_support (pf,ICE_F_DSCP ); -if (ice_is_e810t (&pf->hw)) +if (ice_is_e810t (&pf->hw)) {ice_set_feature_support (pf,ICE_F_SMA_CTRL ); +if (ice_gnss_is_gps_present (&pf->hw)) +ice_set_feature_support (pf,ICE_F_GNSS ); + }break ;default :break ;
drivers/net/ethernet/intel/ice/ice_main.c +11 -0
@@ -570,6 +570,9 @@ ice_prepare_for_reset(struct ice_pf *pf, enum ice_reset_req reset_type)if (test_bit (ICE_FLAG_PTP_SUPPORTED , pf->flags))ice_ptp_release (pf); +if (ice_is_feature_supported (pf,ICE_F_GNSS )) +ice_gnss_exit (pf); +if (hw->port_info)ice_sched_clear_port (hw->port_info);
@@ -4686,6 +4689,9 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)if (test_bit (ICE_FLAG_PTP_SUPPORTED , pf->flags))ice_ptp_init (pf); +if (ice_is_feature_supported (pf,ICE_F_GNSS )) +ice_gnss_init (pf); +/* Note: Flow director init failure is non-fatal to load */ if (ice_init_fdir (pf))dev_err (dev,"could not initialize flow director\n" );
@@ -4861,6 +4867,8 @@ static void ice_remove(struct pci_dev *pdev)ice_deinit_lag (pf);if (test_bit (ICE_FLAG_PTP_SUPPORTED , pf->flags))ice_ptp_release (pf); +if (ice_is_feature_supported (pf,ICE_F_GNSS )) +ice_gnss_exit (pf);if (!ice_is_safe_mode (pf))ice_remove_arfs (pf);ice_setup_mc_magic_wake (pf);
@@ -6724,6 +6732,9 @@ static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type)if (test_bit (ICE_FLAG_PTP_SUPPORTED , pf->flags))ice_ptp_init (pf); +if (ice_is_feature_supported (pf,ICE_F_GNSS )) +ice_gnss_init (pf); +/* rebuild PF VSI */ err =ice_vsi_rebuild_by_type (pf,ICE_VSI_PF );if (err) {
drivers/net/ethernet/intel/ice/ice_ptp_hw.c +31 -0
@@ -3250,6 +3250,37 @@ int ice_write_sma_ctrl_e810t(struct ice_hw *hw, u8 data)return status; } +/** +* ice_read_pca9575_reg_e810t +* @hw: pointer to the hw struct +* @offset: GPIO controller register offset +* @data: pointer to data to be read from the GPIO controller +* +* Read the register from the GPIO controller +*/ +int ice_read_pca9575_reg_e810t (struct ice_hw *hw,u8 offset,u8 *data) +{ +struct ice_aqc_link_topo_addr link_topo; +__le16 addr; +u16 handle; +int err; + +memset (&link_topo,0 ,sizeof (link_topo)); + + err =ice_get_pca9575_handle (hw, &handle); +if (err) +return err; + + link_topo.handle =cpu_to_le16 (handle); + link_topo.topo_params.node_type_ctx = + (ICE_AQC_LINK_TOPO_NODE_CTX_PROVIDED << +ICE_AQC_LINK_TOPO_NODE_CTX_S ); + + addr =cpu_to_le16 ((u16 )offset); + +return ice_aq_read_i2c (hw, link_topo,0 , addr,1 , data,NULL ); +} +/** * ice_is_pca9575_present * @hw: pointer to the hw struct
drivers/net/ethernet/intel/ice/ice_ptp_hw.h +7 -0
@@ -191,6 +191,7 @@ int ice_phy_exit_bypass_e822(struct ice_hw *hw, u8 port);int ice_ptp_init_phy_e810 (struct ice_hw *hw);int ice_read_sma_ctrl_e810t (struct ice_hw *hw,u8 *data);int ice_write_sma_ctrl_e810t (struct ice_hw *hw,u8 data); +int ice_read_pca9575_reg_e810t (struct ice_hw *hw,u8 offset,u8 *data);bool ice_is_pca9575_present (struct ice_hw *hw);#define PFTSYN_SEM_BYTES 4
@@ -443,4 +444,10 @@ bool ice_is_pca9575_present(struct ice_hw *hw);#define ICE_SMA_MAX_BIT_E810T 7#define ICE_PCA9575_P1_OFFSET 8 +/* E810T PCA9575 IO controller registers */ +#define ICE_PCA9575_P0_IN 0x0 + +/* E810T PCA9575 IO controller pin control */ +#define ICE_E810T_P0_GNSS_PRSNT_N BIT(4) +#endif /* _ICE_PTP_HW_H_ */
Signature · 1 line
2.32.0
Nguyen
PATCH v3 1/1 ice: add TTY for GNSS module for E810T device
Quoted 20 lines · Karol Kolacinski
Add a new
ice_gnss.cfile for holding the basic GNSS module functions.
If the device supports GNSS module, call the newice_gnss_initandice_gnss_releasefunctions where appropriate.Implement basic functionality for reading the data from GNSS module using TTY device.
Add I2C read AQ command. It is now required for controlling the external
physical connectors via external I2C port expander on E810-T adapters.Future changes will introduce write functionality.
Signed-off-by Karol Kolacinski <[email protected]>Signed-off-by Sudhansu Sekhar Mishra <[email protected]>---
V1 -> V2: AddedCONFIG_TTYdependency
V2 -> V3: Removed unnecessary & onpf->hwpointer check
<snip>
Quoted 5 lines
+???????pf =
gnss->back;
+???????if (!pf || !pf->hw || !gnss->tty || !gnss->tty->port) { +???????????????err =-EFAULT;
+???????????????goto exit;
+???????}
../drivers/net/ethernet/intel/ice/ice_gnss.c: In function ice_gnss_read:../drivers/net/ethernet/intel/ice/ice_gnss.c:30:13: error: wrong type argument to unary exclamation mark
if (!pf || !pf->hw || !gnss->tty || !gnss->tty->port) {
^I believe Piotr's comment meant the &pf->hw check is not needed at all.
PATCH v3 1/1 ice: add TTY for GNSS module for E810T device
Quoted 30 lines · Anthony L
Quoted 20 lines · Karol Kolacinski
Add a new
ice_gnss.cfile for holding the basic GNSS module functions.
If the device supports GNSS module, call the newice_gnss_initandice_gnss_releasefunctions where appropriate.Implement basic functionality for reading the data from GNSS module using TTY device.
Add I2C read AQ command. It is now required for controlling the external
physical connectors via external I2C port expander on E810-T adapters.Future changes will introduce write functionality.
Signed-off-by Karol Kolacinski <[email protected]>Signed-off-by Sudhansu Sekhar Mishra <[email protected]>---
V1 -> V2: AddedCONFIG_TTYdependency
V2 -> V3: Removed unnecessary & onpf->hwpointer check<snip>
drivers/net/ethernet/intel/ice/ice_gnss.c line 33
Quoted 5 lines
drivers/net/ethernet/intel/ice/ice_gnss.c new file +5
-0+ pf = gnss->back; +if (!pf || !pf->hw || !gnss->tty || !gnss->tty->port) { + err = -EFAULT ; + goto exit; + }
Quoted 8 lines
../drivers/net/ethernet/intel/ice/ice_gnss.c: In functionice_gnss_read:../drivers/net/ethernet/intel/ice/ice_gnss.c:30:13: error: wrong type argument to unary exclamation markif (!pf || !pf->hw || !gnss->tty || !gnss->tty->port) { ^I believe Piotr's comment meant the
&pf->hwcheck is not needed at all.
Yes, exactly. Sorry if that comment was a little misleading.
Piotr