Skip to contentSkip to conversation

meta-ti-bsp: Split out ti-edgeai-fw from ti-rtos-echo-test-fw

PATCH In review Andrew Davis 4 participants 10 messages Jun 27, 2025 – Jul 1, 2025

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 meta-ti-bsp: Split out ti-edgeai-fw from ti-rtos-echo-test-fw

TI EdgeAI firmware is distinct from the other "echo test" firmware provided by ti-rtos-echo-test-fw. It belongs in its own package. Split out the EdgeAI firmware from the "echo test" firmware.

Give this a higher ALTERNATIVE_PRIORITY so that if both are installed the default will still be EdgeAI firmware for AM62A devices.

---
 .../recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb    | 58 +++++++++++++++++++
 .../ti-rtos-fw/ti-rtos-echo-test-fw.bb        | 29 +++++-----
 2 files changed, 72 insertions(+), 15 deletions(-)
 create mode 100644 meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb
meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +58 -0
new file mode 100644
index 00000000..67150968
@@ -0,0 +1,58 @@
+SUMMARY = "TI EdgeAI prebuilt binary firmware images"
+
+LICENSE = "TI-TFL"
+LIC_FILES_CHKSUM = "file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
+
+COMPATIBLE_MACHINE = "am62axx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit update-alternatives
+
+PLAT_SFX = ""
+PLAT_SFX:am62axx = "am62axx"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${CORESDK_RTOS_VERSION}"
+PR = "${INC_PR}.1"
+
+# Secure Build
+inherit ti-secdev
+
+IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
+
+INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
+
+C7X_1_FW = "dsp_edgeai_c7x_1_release_strip.out"
+
+IPC_FW_LIST = ""
+IPC_FW_LIST:am62axx = "${C7X_1_FW}"
+
+do_install() {
+    # Sign Firmware
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh ${S}/${IPC_FW_DIR}/${FW_NAME} ${S}/${IPC_FW_DIR}/${FW_NAME}.signed
+    done
+
+    # Install Firmware
+    install -d ${D}${INSTALL_IPC_FW_DIR}
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}        ${D}${INSTALL_IPC_FW_DIR}
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}.signed ${D}${INSTALL_IPC_FW_DIR}
+    done
+}
+
+ALTERNATIVE:${PN}:am62axx = "\
+                    am62a-c71_0-fw        am62a-c71_0-fw-sec \
+                    "
+
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw]     = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw"
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw-sec] = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw-sec"
+
+ALTERNATIVE_TARGET[am62a-c71_0-fw]     = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}"
+ALTERNATIVE_TARGET[am62a-c71_0-fw-sec] = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}.signed"
+
+ALTERNATIVE_PRIORITY = "20"
meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +14 -15
index 7fffc9de..3e4db129 100644
@@ -36,21 +36,20 @@ IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
 
 INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
 
-MCU_1_0_FW =       "ipc_echo_test_mcu1_0_release_strip.xer5f"
-MCU_1_1_FW =       "ipc_echo_test_mcu1_1_release_strip.xer5f"
-MCU_2_0_FW =       "ipc_echo_test_mcu2_0_release_strip.xer5f"
-MCU_2_1_FW =       "ipc_echo_test_mcu2_1_release_strip.xer5f"
-MCU_3_0_FW =       "ipc_echo_test_mcu3_0_release_strip.xer5f"
-MCU_3_1_FW =       "ipc_echo_test_mcu3_1_release_strip.xer5f"
-MCU_4_0_FW =       "ipc_echo_test_mcu4_0_release_strip.xer5f"
-MCU_4_1_FW =       "ipc_echo_test_mcu4_1_release_strip.xer5f"
-C66_1_FW =         "ipc_echo_test_c66xdsp_1_release_strip.xe66"
-C66_2_FW =         "ipc_echo_test_c66xdsp_2_release_strip.xe66"
-C7X_1_FW =         "ipc_echo_test_c7x_1_release_strip.xe71"
-C7X_1_FW:am62axx = "dsp_edgeai_c7x_1_release_strip.out"
-C7X_2_FW =         "ipc_echo_test_c7x_2_release_strip.xe71"
-C7X_3_FW =         "ipc_echo_test_c7x_3_release_strip.xe71"
-C7X_4_FW =         "ipc_echo_test_c7x_4_release_strip.xe71"
+MCU_1_0_FW = "ipc_echo_test_mcu1_0_release_strip.xer5f"
+MCU_1_1_FW = "ipc_echo_test_mcu1_1_release_strip.xer5f"
+MCU_2_0_FW = "ipc_echo_test_mcu2_0_release_strip.xer5f"
+MCU_2_1_FW = "ipc_echo_test_mcu2_1_release_strip.xer5f"
+MCU_3_0_FW = "ipc_echo_test_mcu3_0_release_strip.xer5f"
+MCU_3_1_FW = "ipc_echo_test_mcu3_1_release_strip.xer5f"
+MCU_4_0_FW = "ipc_echo_test_mcu4_0_release_strip.xer5f"
+MCU_4_1_FW = "ipc_echo_test_mcu4_1_release_strip.xer5f"
+C66_1_FW   = "ipc_echo_test_c66xdsp_1_release_strip.xe66"
+C66_2_FW   = "ipc_echo_test_c66xdsp_2_release_strip.xe66"
+C7X_1_FW   = "ipc_echo_test_c7x_1_release_strip.xe71"
+C7X_2_FW   = "ipc_echo_test_c7x_2_release_strip.xe71"
+C7X_3_FW   = "ipc_echo_test_c7x_3_release_strip.xe71"
+C7X_4_FW   = "ipc_echo_test_c7x_4_release_strip.xe71"
 
 IPC_FW_LIST = ""
 IPC_FW_LIST:am65xx =  "${MCU_1_0_FW} ${MCU_1_1_FW}"
Signature · 1 line
2.39.2
#1 lore raw

PATCH 2/3 ti-linux-fw: Remove default SUMMARY line

All firmware that includes this helper should set their own SUMMARY line. Currently all do, but they often include this file after setting their own SUMMARY, so this one overwrites it. Remove this default SUMMARY.

---
 meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb | 2 --
 1 file changed, 2 deletions(-)
meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb +0 -2
index 67150968..378e3a12 100644
@@ -1,5 +1,3 @@
-SUMMARY = "TI EdgeAI prebuilt binary firmware images"
-
 LICENSE = "TI-TFL"
 LIC_FILES_CHKSUM = "file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
 
Signature · 1 line
2.39.2
#2 lore raw

PATCH 3/3 meta-ti-bsp: Factor out a firmware common options helper

In reply to Andrew Davis

Firmware-only packages tend to set all the same long list of options, factor these out into a helper include and include that in firmware- only package.

---
 .../cpsw9g-eth-fw/cpsw9g-eth-fw_git.bb        | 10 +-------
 .../ti-linux-fw/firmware-common.inc           | 22 +++++++++++++++++
 .../recipes-bsp/ti-linux-fw/ti-linux-fw.inc   | 24 +------------------
 .../zephyr-fw/zephyr-openamp-rsc-table-fw.bb  | 21 +---------------
 4 files changed, 25 insertions(+), 52 deletions(-)
 create mode 100644 meta-ti-bsp/recipes-bsp/ti-linux-fw/firmware-common.inc
meta-ti-bsp/recipes-bsp/cpsw9g-eth-fw/cpsw9g-eth-fw_git.bb +1 -9
index 95ba1e2d..5762ee8a 100755
@@ -18,8 +18,7 @@ S = "${WORKDIR}/git"
 CPSW9G_FW_DIR = "${S}/ethfw"
 CPSW9G_FW_FILENAME = "app_remoteswitchcfg_server_pdk_mem_map_strip.xer5f"
 
-# make sure that lib/firmware, and all its contents are part of the package
-FILES:${PN} += "${nonarch_base_libdir}/firmware"
+require recipes-bsp/ti-linux-fw/firmware-common.inc
 
 do_install() {
   install -d ${D}${nonarch_base_libdir}/firmware
@@ -32,10 +31,3 @@ ALTERNATIVE:${PN} = "j7-main-r5f0_0-fw"
 ALTERNATIVE_LINK_NAME[j7-main-r5f0_0-fw] = "${nonarch_base_libdir}/firmware/${TARGET_MAIN_R5FSS0_0}"
 ALTERNATIVE_TARGET[j7-main-r5f0_0-fw] = "${nonarch_base_libdir}/firmware/${CPSW9G_FW_FILENAME}"
 ALTERNATIVE_PRIORITY = "17"
-
-INHIBIT_PACKAGE_STRIP = "1"
-INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
-INSANE_SKIP:${PN} += "arch"
-
-do_compile[noexec] = "1"
-do_configure[noexec] = "1"
meta-ti-bsp/recipes-bsp/ti-linux-fw/firmware-common.inc new file +22 -0
new file mode 100644
index 00000000..fb9861b8
@@ -0,0 +1,22 @@
+# Clean is broken for most firmware-only repos
+CLEANBROKEN = "1"
+
+# Make sure that lib/firmware, and all its contents are part of the package
+FILES:${PN} = "${nonarch_base_libdir}/firmware"
+
+# This is used to prevent the build system from stripping the firmwares
+INHIBIT_PACKAGE_STRIP = "1"
+INHIBIT_SYSROOT_STRIP = "1"
+
+# This is used to prevent the build system from splitting out the firmware debug info into a separate file
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+
+# Firmware here are prebuilt with no external dependencies
+INHIBIT_DEFAULT_DEPS = "1"
+
+# Disable arch checking as firmware is likely to be a different arch from the Yocto build
+INSANE_SKIP:${PN} += "arch"
+
+# Firmware has no configure nor build steps
+do_compile[noexec] = "1"
+do_configure[noexec] = "1"
meta-ti-bsp/recipes-bsp/ti-linux-fw/ti-linux-fw.inc +1 -23
index b1db1dfd..f216efa4 100644
@@ -1,5 +1,3 @@
-SUMMARY = "Common include for TI Linux firmware"
-
 LICENSE = "TI-TFL"
 LIC_FILES_CHKSUM = "file://LICENSE.ti;md5=b5aebf0668bdf95621259288c4a46d76"
 
@@ -32,24 +30,4 @@ SRC_URI = "${TI_LINUX_FW_GIT_URI};protocol=${TI_LINUX_FW_GIT_PROTOCOL};${TI_LINU
 
 S = "${WORKDIR}/git"
 
-CLEANBROKEN = "1"
-
-# Make sure that lib/firmware, and all its contents are part of the package
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-# This is used to prevent the build system from stripping the firmwares
-INHIBIT_PACKAGE_STRIP = "1"
-INHIBIT_SYSROOT_STRIP = "1"
-
-# This is used to prevent the build system from splitting out the firmware debug info into a separate file
-INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
-
-# Firmware here are prebuilt with no external dependencies
-INHIBIT_DEFAULT_DEPS = "1"
-
-# Disable arch checking as firmware is likely to be a different arch from the Yocto build
-INSANE_SKIP:${PN} += "arch"
-
-# Firmware in Linux Firmware has no configure nor build steps
-do_compile[noexec] = "1"
-do_configure[noexec] = "1"
+require recipes-bsp/ti-linux-fw/firmware-common.inc
meta-ti-bsp/recipes-bsp/zephyr-fw/zephyr-openamp-rsc-table-fw.bb +1 -20
index 3aa69700..c5293a3f 100644
@@ -39,26 +39,7 @@ do_install() {
     done
 }
 
-# Make sure that lib/firmware, and all its contents are part of the package
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-# This is used to prevent the build system from stripping the firmwares
-INHIBIT_PACKAGE_STRIP = "1"
-INHIBIT_SYSROOT_STRIP = "1"
-
-# This is used to prevent the build system from splitting out the firmware debug info into a separate file
-INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
-
-# This is a prebuilt with no external dependencies
-INHIBIT_DEFAULT_DEPS = "1"
-
-# Disable arch checking as firmware is likely to be a different arch from the Yocto build
-INSANE_SKIP:${PN} += "arch"
-
-# Zephyr-Firmware has no configure, compile, nor clean steps
-do_configure[noexec] = "1"
-do_compile[noexec] = "1"
-CLEANBROKEN = "1"
+require recipes-bsp/ti-linux-fw/firmware-common.inc
 
 inherit update-alternatives
 
Signature · 1 line
2.39.2
#3 lore raw
In reply to Andrew Davis

Hi Andrew,

Quoted 3 lines · Andrew Davis via lists.yoctoproject.org

TI EdgeAI firmware is distinct from the other "echo test" firmware provided by ti-rtos-echo-test-fw. It belongs in its own package. Split out the EdgeAI firmware from the "echo test" firmware.

Looks like the corresponding meta-arago patch for adding ti-edgeai-fw in filesystem is missing from the meta-arago lists.

We have added ti-rtos-echo-test-fw in following recipes, so similar should be done for ti-edgeai-fw to ensure that CICD builds [0] have EdgeAI C7x IPC firmwares packaged.

~/source/meta-arago$ find . | grep -rn "ti-rtos-echo-test-fw" meta-arago-test/recipes-core/packagegroups/ti-test.bb:117: ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-console.bb:70: ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb:61:UTILS:append:k3 = " ti-rtos-echo-test-fw"

[0]: https://software-dl.ti.com/cicd-report/linux/index.html?section=platform&platform=am62axx

--
Chirag

Quoted 123 lines

Give this a higher ALTERNATIVE_PRIORITY so that if both are installed the default will still be EdgeAI firmware for AM62A devices.

---
  .../recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb    | 58 +++++++++++++++++++
  .../ti-rtos-fw/ti-rtos-echo-test-fw.bb        | 29 +++++-----
  2 files changed, 72 insertions(+), 15 deletions(-)

create mode 100644 meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +58 -0
new file mode 100644
index 00000000..67150968
@@ -0,0 +1,58 @@
+SUMMARY = "TI EdgeAI prebuilt binary firmware images"
+
+LICENSE = "TI-TFL"
+LIC_FILES_CHKSUM = "file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
+
+COMPATIBLE_MACHINE = "am62axx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit update-alternatives
+
+PLAT_SFX = ""
+PLAT_SFX:am62axx = "am62axx"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${CORESDK_RTOS_VERSION}"
+PR = "${INC_PR}.1"
+
+# Secure Build
+inherit ti-secdev
+
+IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
+
+INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
+
+C7X_1_FW = "dsp_edgeai_c7x_1_release_strip.out"
+
+IPC_FW_LIST = ""
+IPC_FW_LIST:am62axx = "${C7X_1_FW}"
+
+do_install() {
+    # Sign Firmware
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh ${S}/${IPC_FW_DIR}/${FW_NAME} ${S}/${IPC_FW_DIR}/${FW_NAME}.signed
+    done
+
+    # Install Firmware
+    install -d ${D}${INSTALL_IPC_FW_DIR}
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}        ${D}${INSTALL_IPC_FW_DIR}
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}.signed ${D}${INSTALL_IPC_FW_DIR}
+    done
+}
+
+ALTERNATIVE:${PN}:am62axx = "\
+                    am62a-c71_0-fw        am62a-c71_0-fw-sec \
+                    "
+
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw]     = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw"
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw-sec] = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw-sec"
+
+ALTERNATIVE_TARGET[am62a-c71_0-fw]     = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}"
+ALTERNATIVE_TARGET[am62a-c71_0-fw-sec] = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}.signed"
+
+ALTERNATIVE_PRIORITY = "20"
meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +14 -16
index 7fffc9de..3e4db129 100644
@@ -36,21 +36,20 @@ IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
 
  INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
 
-MCU_1_0_FW =       "ipc_echo_test_mcu1_0_release_strip.xer5f"
-MCU_1_1_FW =       "ipc_echo_test_mcu1_1_release_strip.xer5f"
-MCU_2_0_FW =       "ipc_echo_test_mcu2_0_release_strip.xer5f"
-MCU_2_1_FW =       "ipc_echo_test_mcu2_1_release_strip.xer5f"
-MCU_3_0_FW =       "ipc_echo_test_mcu3_0_release_strip.xer5f"
-MCU_3_1_FW =       "ipc_echo_test_mcu3_1_release_strip.xer5f"
-MCU_4_0_FW =       "ipc_echo_test_mcu4_0_release_strip.xer5f"
-MCU_4_1_FW =       "ipc_echo_test_mcu4_1_release_strip.xer5f"
-C66_1_FW =         "ipc_echo_test_c66xdsp_1_release_strip.xe66"
-C66_2_FW =         "ipc_echo_test_c66xdsp_2_release_strip.xe66"
-C7X_1_FW =         "ipc_echo_test_c7x_1_release_strip.xe71"
-C7X_1_FW:am62axx = "dsp_edgeai_c7x_1_release_strip.out"
-C7X_2_FW =         "ipc_echo_test_c7x_2_release_strip.xe71"
-C7X_3_FW =         "ipc_echo_test_c7x_3_release_strip.xe71"
-C7X_4_FW =         "ipc_echo_test_c7x_4_release_strip.xe71"
+MCU_1_0_FW = "ipc_echo_test_mcu1_0_release_strip.xer5f"
+MCU_1_1_FW = "ipc_echo_test_mcu1_1_release_strip.xer5f"
+MCU_2_0_FW = "ipc_echo_test_mcu2_0_release_strip.xer5f"
+MCU_2_1_FW = "ipc_echo_test_mcu2_1_release_strip.xer5f"
+MCU_3_0_FW = "ipc_echo_test_mcu3_0_release_strip.xer5f"
+MCU_3_1_FW = "ipc_echo_test_mcu3_1_release_strip.xer5f"
+MCU_4_0_FW = "ipc_echo_test_mcu4_0_release_strip.xer5f"
+MCU_4_1_FW = "ipc_echo_test_mcu4_1_release_strip.xer5f"
+C66_1_FW   = "ipc_echo_test_c66xdsp_1_release_strip.xe66"
+C66_2_FW   = "ipc_echo_test_c66xdsp_2_release_strip.xe66"
+C7X_1_FW   = "ipc_echo_test_c7x_1_release_strip.xe71"
+C7X_2_FW   = "ipc_echo_test_c7x_2_release_strip.xe71"
+C7X_3_FW   = "ipc_echo_test_c7x_3_release_strip.xe71"
+C7X_4_FW   = "ipc_echo_test_c7x_4_release_strip.xe71"
 
  IPC_FW_LIST = ""
  IPC_FW_LIST:am65xx =  "${MCU_1_0_FW} ${MCU_1_1_FW}"
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group.
View/Reply Online (#18717): https://lists.yoctoproject.org/g/meta-ti/message/18717
Mute This Topic: https://lists.yoctoproject.org/mt/113868641/7030289
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/meta-ti/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

#4 lore raw
Quoted 18 lines · Chirag Shilwant via lists.yoctoproject.org

Hi Andrew,

Quoted 3 lines · Andrew Davis via lists.yoctoproject.org

TI EdgeAI firmware is distinct from the other "echo test" firmware provided by ti-rtos-echo-test-fw. It belongs in its own package. Split out the EdgeAI firmware from the "echo test" firmware.

Looks like the corresponding meta-arago patch for adding ti-edgeai-fw in filesystem
is missing from the meta-arago lists.

We have added ti-rtos-echo-test-fw in following recipes, so similar should be done
for ti-edgeai-fw to ensure that CICD builds [0] have EdgeAI C7x IPC firmwares packaged.

Quoted 7 lines

~/source/meta-arago$ find . | grep -rn "ti-rtos-echo-test-fw" meta-arago-test/recipes-core/packagegroups/ti-test.bb:117:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-console.bb:70:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb:61:UTILS:append:k3 = " ti-rtos-echo-test-fw"

Instead of doing it in images or packagegroups, a better alternative would be to list FW images in either MACHINE_ESSENTIAL_EXTRA_RDEPENDS or MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS, as we already do for most of the FWs.

That way it will work for any distro or image built for the same platform.

Quoted 120 lines

[0]: https://software-dl.ti.com/cicd-report/linux/index.html?section=platform&platform=am62axx

--
Chirag

Quoted 111 lines

Give this a higher ALTERNATIVE_PRIORITY so that if both are installed the default will still be EdgeAI firmware for AM62A devices.

---
 .../recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb    | 58 +++++++++++++++++++
 .../ti-rtos-fw/ti-rtos-echo-test-fw.bb        | 29 +++++-----
 2 files changed, 72 insertions(+), 15 deletions(-)
 create mode 100644 meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb
meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +58 -0
new file mode 100644
index 00000000..67150968
@@ -0,0 +1,58 @@
+SUMMARY = "TI EdgeAI prebuilt binary firmware images"
+
+LICENSE = "TI-TFL"
+LIC_FILES_CHKSUM = "file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
+
+COMPATIBLE_MACHINE = "am62axx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit update-alternatives
+
+PLAT_SFX = ""
+PLAT_SFX:am62axx = "am62axx"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${CORESDK_RTOS_VERSION}"
+PR = "${INC_PR}.1"
+
+# Secure Build
+inherit ti-secdev
+
+IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
+
+INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
+
+C7X_1_FW = "dsp_edgeai_c7x_1_release_strip.out"
+
+IPC_FW_LIST = ""
+IPC_FW_LIST:am62axx = "${C7X_1_FW}"
+
+do_install() {
+    # Sign Firmware
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh ${S}/${IPC_FW_DIR}/${FW_NAME} ${S}/${IPC_FW_DIR}/${FW_NAME}.signed
+    done
+
+    # Install Firmware
+    install -d ${D}${INSTALL_IPC_FW_DIR}
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}        ${D}${INSTALL_IPC_FW_DIR}
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}.signed ${D}${INSTALL_IPC_FW_DIR}
+    done
+}
+
+ALTERNATIVE:${PN}:am62axx = "\
+                    am62a-c71_0-fw        am62a-c71_0-fw-sec \
+                    "
+
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw]     = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw"
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw-sec] = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw-sec"
+
+ALTERNATIVE_TARGET[am62a-c71_0-fw]     = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}"
+ALTERNATIVE_TARGET[am62a-c71_0-fw-sec] = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}.signed"
+
+ALTERNATIVE_PRIORITY = "20"
meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +14 -15
index 7fffc9de..3e4db129 100644
@@ -36,21 +36,20 @@ IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
 INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
-MCU_1_0_FW =       "ipc_echo_test_mcu1_0_release_strip.xer5f"
-MCU_1_1_FW =       "ipc_echo_test_mcu1_1_release_strip.xer5f"
-MCU_2_0_FW =       "ipc_echo_test_mcu2_0_release_strip.xer5f"
-MCU_2_1_FW =       "ipc_echo_test_mcu2_1_release_strip.xer5f"
-MCU_3_0_FW =       "ipc_echo_test_mcu3_0_release_strip.xer5f"
-MCU_3_1_FW =       "ipc_echo_test_mcu3_1_release_strip.xer5f"
-MCU_4_0_FW =       "ipc_echo_test_mcu4_0_release_strip.xer5f"
-MCU_4_1_FW =       "ipc_echo_test_mcu4_1_release_strip.xer5f"
-C66_1_FW =         "ipc_echo_test_c66xdsp_1_release_strip.xe66"
-C66_2_FW =         "ipc_echo_test_c66xdsp_2_release_strip.xe66"
-C7X_1_FW =         "ipc_echo_test_c7x_1_release_strip.xe71"
-C7X_1_FW:am62axx = "dsp_edgeai_c7x_1_release_strip.out"
-C7X_2_FW =         "ipc_echo_test_c7x_2_release_strip.xe71"
-C7X_3_FW =         "ipc_echo_test_c7x_3_release_strip.xe71"
-C7X_4_FW =         "ipc_echo_test_c7x_4_release_strip.xe71"
+MCU_1_0_FW = "ipc_echo_test_mcu1_0_release_strip.xer5f"
+MCU_1_1_FW = "ipc_echo_test_mcu1_1_release_strip.xer5f"
+MCU_2_0_FW = "ipc_echo_test_mcu2_0_release_strip.xer5f"
+MCU_2_1_FW = "ipc_echo_test_mcu2_1_release_strip.xer5f"
+MCU_3_0_FW = "ipc_echo_test_mcu3_0_release_strip.xer5f"
+MCU_3_1_FW = "ipc_echo_test_mcu3_1_release_strip.xer5f"
+MCU_4_0_FW = "ipc_echo_test_mcu4_0_release_strip.xer5f"
+MCU_4_1_FW = "ipc_echo_test_mcu4_1_release_strip.xer5f"
+C66_1_FW   = "ipc_echo_test_c66xdsp_1_release_strip.xe66"
+C66_2_FW   = "ipc_echo_test_c66xdsp_2_release_strip.xe66"
+C7X_1_FW   = "ipc_echo_test_c7x_1_release_strip.xe71"
+C7X_2_FW   = "ipc_echo_test_c7x_2_release_strip.xe71"
+C7X_3_FW   = "ipc_echo_test_c7x_3_release_strip.xe71"
+C7X_4_FW   = "ipc_echo_test_c7x_4_release_strip.xe71"
 IPC_FW_LIST = ""
 IPC_FW_LIST:am65xx =  "${MCU_1_0_FW} ${MCU_1_1_FW}"
#5 lore raw
Quoted 27 lines · Denys Dmytriyenko
Quoted 18 lines · Chirag Shilwant via lists.yoctoproject.org

Hi Andrew,

Quoted 3 lines · Andrew Davis via lists.yoctoproject.org

TI EdgeAI firmware is distinct from the other "echo test" firmware provided by ti-rtos-echo-test-fw. It belongs in its own package. Split out the EdgeAI firmware from the "echo test" firmware.

Looks like the corresponding meta-arago patch for adding ti-edgeai-fw in filesystem
is missing from the meta-arago lists.

We have added ti-rtos-echo-test-fw in following recipes, so similar should be done
for ti-edgeai-fw to ensure that CICD builds [0] have EdgeAI C7x IPC firmwares packaged.

Quoted 7 lines

~/source/meta-arago$ find . | grep -rn "ti-rtos-echo-test-fw" meta-arago-test/recipes-core/packagegroups/ti-test.bb:117:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-console.bb:70:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb:61:UTILS:append:k3 = " ti-rtos-echo-test-fw"

Quoted 6 lines

Instead of doing it in images or packagegroups, a better alternative would be to list FW images in either MACHINE_ESSENTIAL_EXTRA_RDEPENDS or MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS, as we already do for most of the FWs.

That way it will work for any distro or image built for the same platform.

I like this idea in general for most firmware, but our remoteproc firmware is a little different in that is has multiple valid options and selection depends on use-case. The echo test firmware is probably only useful for test images, and EdgeAI firmware might only be useful for EdgeAI images, etc..

So selection of remoteproc firmware should stay in distro layer IMHO

Andrew

Quoted 121 lines
Quoted 121 lines

[0]: https://software-dl.ti.com/cicd-report/linux/index.html?section=platform&platform=am62axx

--
Chirag

Quoted 111 lines

Give this a higher ALTERNATIVE_PRIORITY so that if both are installed the default will still be EdgeAI firmware for AM62A devices.

---
  .../recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb    | 58 +++++++++++++++++++
  .../ti-rtos-fw/ti-rtos-echo-test-fw.bb        | 29 +++++-----
  2 files changed, 72 insertions(+), 15 deletions(-)

create mode 100644 meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +58 -0
new file mode 100644
index 00000000..67150968
@@ -0,0 +1,58 @@
+SUMMARY = "TI EdgeAI prebuilt binary firmware images"
+
+LICENSE = "TI-TFL"
+LIC_FILES_CHKSUM = "file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
+
+COMPATIBLE_MACHINE = "am62axx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit update-alternatives
+
+PLAT_SFX = ""
+PLAT_SFX:am62axx = "am62axx"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${CORESDK_RTOS_VERSION}"
+PR = "${INC_PR}.1"
+
+# Secure Build
+inherit ti-secdev
+
+IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
+
+INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
+
+C7X_1_FW = "dsp_edgeai_c7x_1_release_strip.out"
+
+IPC_FW_LIST = ""
+IPC_FW_LIST:am62axx = "${C7X_1_FW}"
+
+do_install() {
+    # Sign Firmware
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh ${S}/${IPC_FW_DIR}/${FW_NAME} ${S}/${IPC_FW_DIR}/${FW_NAME}.signed
+    done
+
+    # Install Firmware
+    install -d ${D}${INSTALL_IPC_FW_DIR}
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}        ${D}${INSTALL_IPC_FW_DIR}
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}.signed ${D}${INSTALL_IPC_FW_DIR}
+    done
+}
+
+ALTERNATIVE:${PN}:am62axx = "\
+                    am62a-c71_0-fw        am62a-c71_0-fw-sec \
+                    "
+
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw]     = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw"
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw-sec] = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw-sec"
+
+ALTERNATIVE_TARGET[am62a-c71_0-fw]     = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}"
+ALTERNATIVE_TARGET[am62a-c71_0-fw-sec] = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}.signed"
+
+ALTERNATIVE_PRIORITY = "20"
meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +14 -15
index 7fffc9de..3e4db129 100644
@@ -36,21 +36,20 @@ IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
  INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
-MCU_1_0_FW =       "ipc_echo_test_mcu1_0_release_strip.xer5f"
-MCU_1_1_FW =       "ipc_echo_test_mcu1_1_release_strip.xer5f"
-MCU_2_0_FW =       "ipc_echo_test_mcu2_0_release_strip.xer5f"
-MCU_2_1_FW =       "ipc_echo_test_mcu2_1_release_strip.xer5f"
-MCU_3_0_FW =       "ipc_echo_test_mcu3_0_release_strip.xer5f"
-MCU_3_1_FW =       "ipc_echo_test_mcu3_1_release_strip.xer5f"
-MCU_4_0_FW =       "ipc_echo_test_mcu4_0_release_strip.xer5f"
-MCU_4_1_FW =       "ipc_echo_test_mcu4_1_release_strip.xer5f"
-C66_1_FW =         "ipc_echo_test_c66xdsp_1_release_strip.xe66"
-C66_2_FW =         "ipc_echo_test_c66xdsp_2_release_strip.xe66"
-C7X_1_FW =         "ipc_echo_test_c7x_1_release_strip.xe71"
-C7X_1_FW:am62axx = "dsp_edgeai_c7x_1_release_strip.out"
-C7X_2_FW =         "ipc_echo_test_c7x_2_release_strip.xe71"
-C7X_3_FW =         "ipc_echo_test_c7x_3_release_strip.xe71"
-C7X_4_FW =         "ipc_echo_test_c7x_4_release_strip.xe71"
+MCU_1_0_FW = "ipc_echo_test_mcu1_0_release_strip.xer5f"
+MCU_1_1_FW = "ipc_echo_test_mcu1_1_release_strip.xer5f"
+MCU_2_0_FW = "ipc_echo_test_mcu2_0_release_strip.xer5f"
+MCU_2_1_FW = "ipc_echo_test_mcu2_1_release_strip.xer5f"
+MCU_3_0_FW = "ipc_echo_test_mcu3_0_release_strip.xer5f"
+MCU_3_1_FW = "ipc_echo_test_mcu3_1_release_strip.xer5f"
+MCU_4_0_FW = "ipc_echo_test_mcu4_0_release_strip.xer5f"
+MCU_4_1_FW = "ipc_echo_test_mcu4_1_release_strip.xer5f"
+C66_1_FW   = "ipc_echo_test_c66xdsp_1_release_strip.xe66"
+C66_2_FW   = "ipc_echo_test_c66xdsp_2_release_strip.xe66"
+C7X_1_FW   = "ipc_echo_test_c7x_1_release_strip.xe71"
+C7X_2_FW   = "ipc_echo_test_c7x_2_release_strip.xe71"
+C7X_3_FW   = "ipc_echo_test_c7x_3_release_strip.xe71"
+C7X_4_FW   = "ipc_echo_test_c7x_4_release_strip.xe71"
  IPC_FW_LIST = ""
  IPC_FW_LIST:am65xx =  "${MCU_1_0_FW} ${MCU_1_1_FW}"
#6 lore raw
Quoted 35 lines · Andrew Davis
Quoted 27 lines · Denys Dmytriyenko
Quoted 18 lines · Chirag Shilwant via lists.yoctoproject.org

Hi Andrew,

Quoted 3 lines · Andrew Davis via lists.yoctoproject.org

TI EdgeAI firmware is distinct from the other "echo test" firmware provided by ti-rtos-echo-test-fw. It belongs in its own package. Split out the EdgeAI firmware from the "echo test" firmware.

Looks like the corresponding meta-arago patch for adding ti-edgeai-fw in filesystem
is missing from the meta-arago lists.

We have added ti-rtos-echo-test-fw in following recipes, so similar should be done
for ti-edgeai-fw to ensure that CICD builds [0] have EdgeAI C7x IPC firmwares packaged.

Quoted 7 lines

~/source/meta-arago$ find . | grep -rn "ti-rtos-echo-test-fw" meta-arago-test/recipes-core/packagegroups/ti-test.bb:117:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-console.bb:70:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb:61:UTILS:append:k3 = " ti-rtos-echo-test-fw"

Quoted 6 lines

Instead of doing it in images or packagegroups, a better alternative would be to list FW images in either MACHINE_ESSENTIAL_EXTRA_RDEPENDS or MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS, as we already do for most of the FWs.

That way it will work for any distro or image built for the same platform.

Quoted 6 lines

I like this idea in general for most firmware, but our remoteproc firmware is a little different in that is has multiple valid options and selection depends on use-case. The echo test firmware is probably only useful for test images, and EdgeAI firmware might only be useful for EdgeAI images, etc..

So selection of remoteproc firmware should stay in distro layer IMHO

Is it possible to specify that two packages cannot be built/installed at the same time? I think there is a way. For this specific case I think we should use that.

Quoted 132 lines

Andrew

Quoted 130 lines
Quoted 130 lines

[0]: https://software-dl.ti.com/cicd-report/linux/index.html?section=platform&platform=am62axx

Signature · 1 line
Chirag
Quoted 120 lines

Give this a higher ALTERNATIVE_PRIORITY so that if both are installed the default will still be EdgeAI firmware for AM62A devices.

---
  .../recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb    | 58
+++++++++++++++++++
  .../ti-rtos-fw/ti-rtos-echo-test-fw.bb        | 29 +++++-----

  2 files changed, 72 insertions(+), 15 deletions(-)

  create mode 100644 meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +4 -0
new file mode 100644
index 00000000..67150968
@@ -0,0 +1,58 @@
+SUMMARY = "TI EdgeAI prebuilt binary firmware images"
+
+LICENSE = "TI-TFL"
+LIC_FILES_CHKSUM = 

"file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +32 -0
+
+COMPATIBLE_MACHINE = "am62axx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit update-alternatives
+
+PLAT_SFX = ""
+PLAT_SFX:am62axx = "am62axx"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${CORESDK_RTOS_VERSION}"
+PR = "${INC_PR}.1"
+
+# Secure Build
+inherit ti-secdev
+
+IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
+
+INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
+
+C7X_1_FW = "dsp_edgeai_c7x_1_release_strip.out"
+
+IPC_FW_LIST = ""
+IPC_FW_LIST:am62axx = "${C7X_1_FW}"
+
+do_install() {
+    # Sign Firmware
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh 

${S}/${IPC_FW_DIR}/${FW_NAME} ${S}/${IPC_FW_DIR}/${FW_NAME}.signed +    done
+
+    # Install Firmware
+    install -d ${D}${INSTALL_IPC_FW_DIR}
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME} ${D}${INSTALL_IPC_FW_DIR}
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}.signed ${D}${INSTALL_IPC_FW_DIR}
+    done

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +7 -0
+}
+
+ALTERNATIVE:${PN}:am62axx = "\
+                    am62a-c71_0-fw        am62a-c71_0-fw-sec \
+                    "
+
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw]     = 

"${nonarch_base_libdir}/firmware/am62a-c71_0-fw" +ALTERNATIVE_LINK_NAME[am62a-c71_0-fw-sec] = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw-sec"

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +2 -0
+
+ALTERNATIVE_TARGET[am62a-c71_0-fw]     = 

"${INSTALL_IPC_FW_DIR}/${C7X_1_FW}"
+ALTERNATIVE_TARGET[am62a-c71_0-fw-sec] =
"${INSTALL_IPC_FW_DIR}/${C7X_1_FW}.signed"

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +2 -0
+
+ALTERNATIVE_PRIORITY = "20"
meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +0 -0
index 7fffc9de..3e4db129 100644
@@ -36,21 +36,20 @@ IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"

  INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +14 -15
-MCU_1_0_FW =       "ipc_echo_test_mcu1_0_release_strip.xer5f"
-MCU_1_1_FW =       "ipc_echo_test_mcu1_1_release_strip.xer5f"
-MCU_2_0_FW =       "ipc_echo_test_mcu2_0_release_strip.xer5f"
-MCU_2_1_FW =       "ipc_echo_test_mcu2_1_release_strip.xer5f"
-MCU_3_0_FW =       "ipc_echo_test_mcu3_0_release_strip.xer5f"
-MCU_3_1_FW =       "ipc_echo_test_mcu3_1_release_strip.xer5f"
-MCU_4_0_FW =       "ipc_echo_test_mcu4_0_release_strip.xer5f"
-MCU_4_1_FW =       "ipc_echo_test_mcu4_1_release_strip.xer5f"
-C66_1_FW =         "ipc_echo_test_c66xdsp_1_release_strip.xe66"
-C66_2_FW =         "ipc_echo_test_c66xdsp_2_release_strip.xe66"
-C7X_1_FW =         "ipc_echo_test_c7x_1_release_strip.xe71"
-C7X_1_FW:am62axx = "dsp_edgeai_c7x_1_release_strip.out"
-C7X_2_FW =         "ipc_echo_test_c7x_2_release_strip.xe71"
-C7X_3_FW =         "ipc_echo_test_c7x_3_release_strip.xe71"
-C7X_4_FW =         "ipc_echo_test_c7x_4_release_strip.xe71"
+MCU_1_0_FW = "ipc_echo_test_mcu1_0_release_strip.xer5f"
+MCU_1_1_FW = "ipc_echo_test_mcu1_1_release_strip.xer5f"
+MCU_2_0_FW = "ipc_echo_test_mcu2_0_release_strip.xer5f"
+MCU_2_1_FW = "ipc_echo_test_mcu2_1_release_strip.xer5f"
+MCU_3_0_FW = "ipc_echo_test_mcu3_0_release_strip.xer5f"
+MCU_3_1_FW = "ipc_echo_test_mcu3_1_release_strip.xer5f"
+MCU_4_0_FW = "ipc_echo_test_mcu4_0_release_strip.xer5f"
+MCU_4_1_FW = "ipc_echo_test_mcu4_1_release_strip.xer5f"
+C66_1_FW   = "ipc_echo_test_c66xdsp_1_release_strip.xe66"
+C66_2_FW   = "ipc_echo_test_c66xdsp_2_release_strip.xe66"
+C7X_1_FW   = "ipc_echo_test_c7x_1_release_strip.xe71"
+C7X_2_FW   = "ipc_echo_test_c7x_2_release_strip.xe71"
+C7X_3_FW   = "ipc_echo_test_c7x_3_release_strip.xe71"
+C7X_4_FW   = "ipc_echo_test_c7x_4_release_strip.xe71"

  IPC_FW_LIST = ""
  IPC_FW_LIST:am65xx =  "${MCU_1_0_FW} ${MCU_1_1_FW}"

Signature · 3 lines
Ryan Eatmon                [email protected]
-----------------------------------------
Texas Instruments, Inc.  -  LCPD  -  MGTS
#7 lore raw
Quoted 38 lines · Ryan Eatmon
Quoted 35 lines · Andrew Davis
Quoted 33 lines · Denys Dmytriyenko
Quoted 18 lines · Chirag Shilwant via lists.yoctoproject.org

Hi Andrew,

Quoted 3 lines · Andrew Davis via lists.yoctoproject.org

TI EdgeAI firmware is distinct from the other "echo test" firmware provided by ti-rtos-echo-test-fw. It belongs in its own package. Split out the EdgeAI firmware from the "echo test" firmware.

Looks like the corresponding meta-arago patch for adding ti-edgeai-fw in filesystem
is missing from the meta-arago lists.

We have added ti-rtos-echo-test-fw in following recipes, so similar should be done
for ti-edgeai-fw to ensure that CICD builds [0] have EdgeAI C7x IPC firmwares packaged.

Quoted 7 lines

~/source/meta-arago$ find . | grep -rn "ti-rtos-echo-test-fw" meta-arago-test/recipes-core/packagegroups/ti-test.bb:117:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-console.bb:70:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb:61:UTILS:append:k3 = " ti-rtos-echo-test-fw"

Instead of doing it in images or packagegroups, a better alternative would be to list FW images in either MACHINE_ESSENTIAL_EXTRA_RDEPENDS or MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS, as we already do for most of the FWs.

That way it will work for any distro or image built for the same platform.

Quoted 9 lines
Quoted 6 lines

I like this idea in general for most firmware, but our remoteproc firmware is a little different in that is has multiple valid options and selection depends on use-case. The echo test firmware is probably only useful for test images, and EdgeAI firmware might only be useful for EdgeAI images, etc..

So selection of remoteproc firmware should stay in distro layer IMHO

Is it possible to specify that two packages cannot be built/installed at the same time?  I think there is a way.  For this specific case I think we should use that.

In this case, we can build and install both at the same time, they both use update alternatives and should live happily together. EdgeAI firmware, if installed, will be higher priority so will be the default loaded by kernel, this matches existing behavior (once we add ti-edgeai-fw to the images).

Andrew

Quoted 125 lines
Quoted 124 lines

Andrew

Quoted 121 lines
Quoted 121 lines

[0]: https://software-dl.ti.com/cicd-report/linux/index.html?section=platform&platform=am62axx

Signature · 1 line
Chirag
Quoted 111 lines

Give this a higher ALTERNATIVE_PRIORITY so that if both are installed the default will still be EdgeAI firmware for AM62A devices.

---
  .../recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb    | 58 +++++++++++++++++++ .../ti-rtos-fw/ti-rtos-echo-test-fw.bb        | 29 +++++-----

  2 files changed, 72 insertions(+), 15 deletions(-)

  create mode 100644 meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +58 -0
new file mode 100644
index 00000000..67150968
@@ -0,0 +1,58 @@
+SUMMARY = "TI EdgeAI prebuilt binary firmware images"
+
+LICENSE = "TI-TFL"
+LIC_FILES_CHKSUM = "file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
+
+COMPATIBLE_MACHINE = "am62axx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit update-alternatives
+
+PLAT_SFX = ""
+PLAT_SFX:am62axx = "am62axx"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${CORESDK_RTOS_VERSION}"
+PR = "${INC_PR}.1"
+
+# Secure Build
+inherit ti-secdev
+
+IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
+
+INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
+
+C7X_1_FW = "dsp_edgeai_c7x_1_release_strip.out"
+
+IPC_FW_LIST = ""
+IPC_FW_LIST:am62axx = "${C7X_1_FW}"
+
+do_install() {
+    # Sign Firmware
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh ${S}/${IPC_FW_DIR}/${FW_NAME} ${S}/${IPC_FW_DIR}/${FW_NAME}.signed
+    done
+
+    # Install Firmware
+    install -d ${D}${INSTALL_IPC_FW_DIR}
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME} ${D}${INSTALL_IPC_FW_DIR}
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}.signed ${D}${INSTALL_IPC_FW_DIR}
+    done
+}
+
+ALTERNATIVE:${PN}:am62axx = "\
+                    am62a-c71_0-fw        am62a-c71_0-fw-sec \
+                    "
+
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw]     = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw"
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw-sec] = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw-sec"
+
+ALTERNATIVE_TARGET[am62a-c71_0-fw]     = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}"
+ALTERNATIVE_TARGET[am62a-c71_0-fw-sec] = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}.signed"
+
+ALTERNATIVE_PRIORITY = "20"
meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +0 -0
index 7fffc9de..3e4db129 100644
@@ -36,21 +36,20 @@ IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"

  INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +14 -15
-MCU_1_0_FW =       "ipc_echo_test_mcu1_0_release_strip.xer5f"
-MCU_1_1_FW =       "ipc_echo_test_mcu1_1_release_strip.xer5f"
-MCU_2_0_FW =       "ipc_echo_test_mcu2_0_release_strip.xer5f"
-MCU_2_1_FW =       "ipc_echo_test_mcu2_1_release_strip.xer5f"
-MCU_3_0_FW =       "ipc_echo_test_mcu3_0_release_strip.xer5f"
-MCU_3_1_FW =       "ipc_echo_test_mcu3_1_release_strip.xer5f"
-MCU_4_0_FW =       "ipc_echo_test_mcu4_0_release_strip.xer5f"
-MCU_4_1_FW =       "ipc_echo_test_mcu4_1_release_strip.xer5f"
-C66_1_FW =         "ipc_echo_test_c66xdsp_1_release_strip.xe66"
-C66_2_FW =         "ipc_echo_test_c66xdsp_2_release_strip.xe66"
-C7X_1_FW =         "ipc_echo_test_c7x_1_release_strip.xe71"
-C7X_1_FW:am62axx = "dsp_edgeai_c7x_1_release_strip.out"
-C7X_2_FW =         "ipc_echo_test_c7x_2_release_strip.xe71"
-C7X_3_FW =         "ipc_echo_test_c7x_3_release_strip.xe71"
-C7X_4_FW =         "ipc_echo_test_c7x_4_release_strip.xe71"
+MCU_1_0_FW = "ipc_echo_test_mcu1_0_release_strip.xer5f"
+MCU_1_1_FW = "ipc_echo_test_mcu1_1_release_strip.xer5f"
+MCU_2_0_FW = "ipc_echo_test_mcu2_0_release_strip.xer5f"
+MCU_2_1_FW = "ipc_echo_test_mcu2_1_release_strip.xer5f"
+MCU_3_0_FW = "ipc_echo_test_mcu3_0_release_strip.xer5f"
+MCU_3_1_FW = "ipc_echo_test_mcu3_1_release_strip.xer5f"
+MCU_4_0_FW = "ipc_echo_test_mcu4_0_release_strip.xer5f"
+MCU_4_1_FW = "ipc_echo_test_mcu4_1_release_strip.xer5f"
+C66_1_FW   = "ipc_echo_test_c66xdsp_1_release_strip.xe66"
+C66_2_FW   = "ipc_echo_test_c66xdsp_2_release_strip.xe66"
+C7X_1_FW   = "ipc_echo_test_c7x_1_release_strip.xe71"
+C7X_2_FW   = "ipc_echo_test_c7x_2_release_strip.xe71"
+C7X_3_FW   = "ipc_echo_test_c7x_3_release_strip.xe71"
+C7X_4_FW   = "ipc_echo_test_c7x_4_release_strip.xe71"

  IPC_FW_LIST = ""
  IPC_FW_LIST:am65xx =  "${MCU_1_0_FW} ${MCU_1_1_FW}"

#8 lore raw
Quoted 46 lines · Andrew Davis via lists.yoctoproject.org
Quoted 45 lines · Ryan Eatmon
Quoted 41 lines · Andrew Davis
Quoted 27 lines · Denys Dmytriyenko
Quoted 18 lines · Chirag Shilwant via lists.yoctoproject.org

Hi Andrew,

Quoted 3 lines · Andrew Davis via lists.yoctoproject.org

TI EdgeAI firmware is distinct from the other "echo test" firmware provided by ti-rtos-echo-test-fw. It belongs in its own package. Split out the EdgeAI firmware from the "echo test" firmware.

Looks like the corresponding meta-arago patch for adding ti-edgeai-fw in filesystem
is missing from the meta-arago lists.

We have added ti-rtos-echo-test-fw in following recipes, so similar should be done
for ti-edgeai-fw to ensure that CICD builds [0] have EdgeAI C7x IPC firmwares packaged.

Quoted 7 lines

~/source/meta-arago$ find . | grep -rn "ti-rtos-echo-test-fw" meta-arago-test/recipes-core/packagegroups/ti-test.bb:117:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-console.bb:70:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb:61:UTILS:append:k3 = " ti-rtos-echo-test-fw"

Quoted 6 lines

Instead of doing it in images or packagegroups, a better alternative would be to list FW images in either MACHINE_ESSENTIAL_EXTRA_RDEPENDS or MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS, as we already do for most of the FWs.

That way it will work for any distro or image built for the same platform.

I like this idea in general for most firmware, but our remoteproc firmware is a little different in that is has multiple valid options and selection depends on use-case. The echo test firmware is probably only useful for test images, and EdgeAI firmware might only be useful for EdgeAI images, etc..

So selection of remoteproc firmware should stay in distro layer IMHO

Quoted 7 lines
Quoted 2 lines

Is it possible to specify that two packages cannot be built/installed at the same time?  I think there is a way.  For this specific case I think we should use that.

In this case, we can build and install both at the same time, they both use update alternatives and should live happily together. EdgeAI firmware, if installed, will be higher priority so will be the default loaded by kernel, this matches existing behavior (once we add ti-edgeai-fw to the images).

Heh, we just cross-posted with the same comment.

But my point is - why not list all alternatives in *_RRECOMMENDS and let distros adjust priorities accordingly?

E.g. EdgeAI SDK can raise edgeai FW priority, otherwise echo FW will be used by default.

Quoted 126 lines

Andrew

Quoted 124 lines
Quoted 124 lines

Andrew

Quoted 121 lines
Quoted 121 lines

[0]: https://software-dl.ti.com/cicd-report/linux/index.html?section=platform&platform=am62axx

Signature · 1 line
Chirag
Quoted 111 lines

Give this a higher ALTERNATIVE_PRIORITY so that if both are installed the default will still be EdgeAI firmware for AM62A devices.

---
  .../recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb    | 58 +++++++++++++++++++ .../ti-rtos-fw/ti-rtos-echo-test-fw.bb        | 29 +++++-----

  2 files changed, 72 insertions(+), 15 deletions(-)

  create mode 100644 meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +58 -0
new file mode 100644
index 00000000..67150968
@@ -0,0 +1,58 @@
+SUMMARY = "TI EdgeAI prebuilt binary firmware images"
+
+LICENSE = "TI-TFL"
+LIC_FILES_CHKSUM = "file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
+
+COMPATIBLE_MACHINE = "am62axx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit update-alternatives
+
+PLAT_SFX = ""
+PLAT_SFX:am62axx = "am62axx"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${CORESDK_RTOS_VERSION}"
+PR = "${INC_PR}.1"
+
+# Secure Build
+inherit ti-secdev
+
+IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
+
+INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
+
+C7X_1_FW = "dsp_edgeai_c7x_1_release_strip.out"
+
+IPC_FW_LIST = ""
+IPC_FW_LIST:am62axx = "${C7X_1_FW}"
+
+do_install() {
+    # Sign Firmware
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh ${S}/${IPC_FW_DIR}/${FW_NAME} ${S}/${IPC_FW_DIR}/${FW_NAME}.signed
+    done
+
+    # Install Firmware
+    install -d ${D}${INSTALL_IPC_FW_DIR}
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME} ${D}${INSTALL_IPC_FW_DIR}
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}.signed ${D}${INSTALL_IPC_FW_DIR}
+    done
+}
+
+ALTERNATIVE:${PN}:am62axx = "\
+                    am62a-c71_0-fw        am62a-c71_0-fw-sec \
+                    "
+
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw]     = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw"
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw-sec] = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw-sec"
+
+ALTERNATIVE_TARGET[am62a-c71_0-fw]     = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}"
+ALTERNATIVE_TARGET[am62a-c71_0-fw-sec] = "${INSTALL_IPC_FW_DIR}/${C7X_1_FW}.signed"
+
+ALTERNATIVE_PRIORITY = "20"
meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +0 -0
index 7fffc9de..3e4db129 100644
@@ -36,21 +36,20 @@ IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"

  INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +14 -15
-MCU_1_0_FW =       "ipc_echo_test_mcu1_0_release_strip.xer5f"
-MCU_1_1_FW =       "ipc_echo_test_mcu1_1_release_strip.xer5f"
-MCU_2_0_FW =       "ipc_echo_test_mcu2_0_release_strip.xer5f"
-MCU_2_1_FW =       "ipc_echo_test_mcu2_1_release_strip.xer5f"
-MCU_3_0_FW =       "ipc_echo_test_mcu3_0_release_strip.xer5f"
-MCU_3_1_FW =       "ipc_echo_test_mcu3_1_release_strip.xer5f"
-MCU_4_0_FW =       "ipc_echo_test_mcu4_0_release_strip.xer5f"
-MCU_4_1_FW =       "ipc_echo_test_mcu4_1_release_strip.xer5f"
-C66_1_FW =         "ipc_echo_test_c66xdsp_1_release_strip.xe66"
-C66_2_FW =         "ipc_echo_test_c66xdsp_2_release_strip.xe66"
-C7X_1_FW =         "ipc_echo_test_c7x_1_release_strip.xe71"
-C7X_1_FW:am62axx = "dsp_edgeai_c7x_1_release_strip.out"
-C7X_2_FW =         "ipc_echo_test_c7x_2_release_strip.xe71"
-C7X_3_FW =         "ipc_echo_test_c7x_3_release_strip.xe71"
-C7X_4_FW =         "ipc_echo_test_c7x_4_release_strip.xe71"
+MCU_1_0_FW = "ipc_echo_test_mcu1_0_release_strip.xer5f"
+MCU_1_1_FW = "ipc_echo_test_mcu1_1_release_strip.xer5f"
+MCU_2_0_FW = "ipc_echo_test_mcu2_0_release_strip.xer5f"
+MCU_2_1_FW = "ipc_echo_test_mcu2_1_release_strip.xer5f"
+MCU_3_0_FW = "ipc_echo_test_mcu3_0_release_strip.xer5f"
+MCU_3_1_FW = "ipc_echo_test_mcu3_1_release_strip.xer5f"
+MCU_4_0_FW = "ipc_echo_test_mcu4_0_release_strip.xer5f"
+MCU_4_1_FW = "ipc_echo_test_mcu4_1_release_strip.xer5f"
+C66_1_FW   = "ipc_echo_test_c66xdsp_1_release_strip.xe66"
+C66_2_FW   = "ipc_echo_test_c66xdsp_2_release_strip.xe66"
+C7X_1_FW   = "ipc_echo_test_c7x_1_release_strip.xe71"
+C7X_2_FW   = "ipc_echo_test_c7x_2_release_strip.xe71"
+C7X_3_FW   = "ipc_echo_test_c7x_3_release_strip.xe71"
+C7X_4_FW   = "ipc_echo_test_c7x_4_release_strip.xe71"

  IPC_FW_LIST = ""
  IPC_FW_LIST:am65xx =  "${MCU_1_0_FW} ${MCU_1_1_FW}"

#9 lore raw
In reply to Ryan Eatmon
Quoted 48 lines · Ryan Eatmon
Quoted 45 lines · Andrew Davis
Quoted 28 lines · Denys Dmytriyenko
Quoted 18 lines · Chirag Shilwant via lists.yoctoproject.org

Hi Andrew,

Quoted 3 lines · Andrew Davis via lists.yoctoproject.org

TI EdgeAI firmware is distinct from the other "echo test" firmware provided by ti-rtos-echo-test-fw. It belongs in its own package. Split out the EdgeAI firmware from the "echo test" firmware.

Looks like the corresponding meta-arago patch for adding ti-edgeai-fw in filesystem
is missing from the meta-arago lists.

We have added ti-rtos-echo-test-fw in following recipes, so similar should be done
for ti-edgeai-fw to ensure that CICD builds [0] have EdgeAI C7x IPC firmwares packaged.

Quoted 7 lines

~/source/meta-arago$ find . | grep -rn "ti-rtos-echo-test-fw" meta-arago-test/recipes-core/packagegroups/ti-test.bb:117:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-console.bb:70:
ti-rtos-echo-test-fw \
meta-arago-distro/recipes-core/packagegroups/packagegroup-arago-tisdk-addons.bb:61:UTILS:append:k3 = " ti-rtos-echo-test-fw"

Quoted 9 lines

Instead of doing it in images or packagegroups, a better alternative would
be to list FW images in either MACHINE_ESSENTIAL_EXTRA_RDEPENDS or MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS, as we already do for most of the FWs.

That way it will work for any distro or image built for the same platform.

I like this idea in general for most firmware, but our remoteproc firmware is a little different in that is has multiple valid options and selection depends on use-case. The echo test firmware is probably only useful for test
images, and EdgeAI firmware might only be useful for EdgeAI images, etc..

Quoted 5 lines
Quoted 1 line

So selection of remoteproc firmware should stay in distro layer IMHO

Is it possible to specify that two packages cannot be built/installed at the same time? I think there is a way. For this specific case I think we should use that.

Yeah, FW packages already use "alternatives" from update-alternatives, where you can adjust priorities to select one FW over another, when they conflict each other. Specifically, you can install both, but then a symlink gets created to point to one or another based on priorities, plus you can change that at runtime as well.

The default priority adjustment should be done by a distro and we've had some instances of that in the past, where a generic FW gets selected by default, but then a more specific FW gets selected when a specific branded distro gets built.

Here's a remnant from it, showing how this can be done:
https://git.yoctoproject.org/meta-arago/tree/meta-arago-distro/conf/distro/include/branding-core.inc#n8

Quoted 137 lines
Quoted 137 lines

Andrew

Quoted 135 lines
Quoted 135 lines

[0]: https://software-dl.ti.com/cicd-report/linux/index.html?section=platform&platform=am62axx

Signature · 1 line
Chirag
Quoted 125 lines

Give this a higher ALTERNATIVE_PRIORITY so that if both are installed the default will still be EdgeAI firmware for AM62A devices.

---
  .../recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb    | 58
+++++++++++++++++++
  .../ti-rtos-fw/ti-rtos-echo-test-fw.bb        | 29 +++++-----

  2 files changed, 72 insertions(+), 15 deletions(-)

  create mode 100644 meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb

diff --git a/meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb b/meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file mode 100644
index 00000000..67150968

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +36 -0
@@ -0,0 +1,58 @@
+SUMMARY = "TI EdgeAI prebuilt binary firmware images"
+
+LICENSE = "TI-TFL"
+LIC_FILES_CHKSUM = "file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
+
+COMPATIBLE_MACHINE = "am62axx"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit update-alternatives
+
+PLAT_SFX = ""
+PLAT_SFX:am62axx = "am62axx"
+
+require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
+
+PV = "${CORESDK_RTOS_VERSION}"
+PR = "${INC_PR}.1"
+
+# Secure Build
+inherit ti-secdev
+
+IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"
+
+INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"
+
+C7X_1_FW = "dsp_edgeai_c7x_1_release_strip.out"
+
+IPC_FW_LIST = ""
+IPC_FW_LIST:am62axx = "${C7X_1_FW}"
+
+do_install() {
+    # Sign Firmware
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh

${S}/${IPC_FW_DIR}/${FW_NAME} ${S}/${IPC_FW_DIR}/${FW_NAME}.signed
+    done
+
+    # Install Firmware
+    install -d ${D}${INSTALL_IPC_FW_DIR}
+    for FW_NAME in ${IPC_FW_LIST}
+    do
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME} ${D}${INSTALL_IPC_FW_DIR}
+        install -m 0644 ${S}/${IPC_FW_DIR}/${FW_NAME}.signed ${D}${INSTALL_IPC_FW_DIR}
+    done

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +7 -0
+}
+
+ALTERNATIVE:${PN}:am62axx = "\
+                    am62a-c71_0-fw        am62a-c71_0-fw-sec \
+                    "
+
+ALTERNATIVE_LINK_NAME[am62a-c71_0-fw]     =

"${nonarch_base_libdir}/firmware/am62a-c71_0-fw" +ALTERNATIVE_LINK_NAME[am62a-c71_0-fw-sec] = "${nonarch_base_libdir}/firmware/am62a-c71_0-fw-sec"

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +2 -0
+
+ALTERNATIVE_TARGET[am62a-c71_0-fw]     =

"${INSTALL_IPC_FW_DIR}/${C7X_1_FW}"
+ALTERNATIVE_TARGET[am62a-c71_0-fw-sec] =
"${INSTALL_IPC_FW_DIR}/${C7X_1_FW}.signed"

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-edgeai-fw.bb new file +2 -0
+
+ALTERNATIVE_PRIORITY = "20"

diff --git a/meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb b/meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb index 7fffc9de..3e4db129 100644

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +0 -0
@@ -36,21 +36,20 @@ IPC_FW_DIR = "ti-ipc/${PLAT_SFX}"

  INSTALL_IPC_FW_DIR = "${nonarch_base_libdir}/firmware/${IPC_FW_DIR}"

meta-ti-bsp/recipes-bsp/ti-rtos-fw/ti-rtos-echo-test-fw.bb +14 -15
-MCU_1_0_FW =       "ipc_echo_test_mcu1_0_release_strip.xer5f"
-MCU_1_1_FW =       "ipc_echo_test_mcu1_1_release_strip.xer5f"
-MCU_2_0_FW =       "ipc_echo_test_mcu2_0_release_strip.xer5f"
-MCU_2_1_FW =       "ipc_echo_test_mcu2_1_release_strip.xer5f"
-MCU_3_0_FW =       "ipc_echo_test_mcu3_0_release_strip.xer5f"
-MCU_3_1_FW =       "ipc_echo_test_mcu3_1_release_strip.xer5f"
-MCU_4_0_FW =       "ipc_echo_test_mcu4_0_release_strip.xer5f"
-MCU_4_1_FW =       "ipc_echo_test_mcu4_1_release_strip.xer5f"
-C66_1_FW =         "ipc_echo_test_c66xdsp_1_release_strip.xe66"
-C66_2_FW =         "ipc_echo_test_c66xdsp_2_release_strip.xe66"
-C7X_1_FW =         "ipc_echo_test_c7x_1_release_strip.xe71"
-C7X_1_FW:am62axx = "dsp_edgeai_c7x_1_release_strip.out"
-C7X_2_FW =         "ipc_echo_test_c7x_2_release_strip.xe71"
-C7X_3_FW =         "ipc_echo_test_c7x_3_release_strip.xe71"
-C7X_4_FW =         "ipc_echo_test_c7x_4_release_strip.xe71"
+MCU_1_0_FW = "ipc_echo_test_mcu1_0_release_strip.xer5f"
+MCU_1_1_FW = "ipc_echo_test_mcu1_1_release_strip.xer5f"
+MCU_2_0_FW = "ipc_echo_test_mcu2_0_release_strip.xer5f"
+MCU_2_1_FW = "ipc_echo_test_mcu2_1_release_strip.xer5f"
+MCU_3_0_FW = "ipc_echo_test_mcu3_0_release_strip.xer5f"
+MCU_3_1_FW = "ipc_echo_test_mcu3_1_release_strip.xer5f"
+MCU_4_0_FW = "ipc_echo_test_mcu4_0_release_strip.xer5f"
+MCU_4_1_FW = "ipc_echo_test_mcu4_1_release_strip.xer5f"
+C66_1_FW   = "ipc_echo_test_c66xdsp_1_release_strip.xe66"
+C66_2_FW   = "ipc_echo_test_c66xdsp_2_release_strip.xe66"
+C7X_1_FW   = "ipc_echo_test_c7x_1_release_strip.xe71"
+C7X_2_FW   = "ipc_echo_test_c7x_2_release_strip.xe71"
+C7X_3_FW   = "ipc_echo_test_c7x_3_release_strip.xe71"
+C7X_4_FW   = "ipc_echo_test_c7x_4_release_strip.xe71"

  IPC_FW_LIST = ""
  IPC_FW_LIST:am65xx =  "${MCU_1_0_FW} ${MCU_1_1_FW}"