Skip to contentSkip to conversation

drm/amdgpu: Add 'modeset' module parameter

PATCH In review Lyude Paul 5 participants 5 messages May 11, 2022 – May 12, 2022

Subsystems (2)
lore
Share & tools
lore

Lyude Paul

author
#0 lore raw

PATCH 1/1 drm/amdgpu: Add 'modeset' module parameter

Many DRM drivers feature a 'modeset' argument, which can be used to enable/disable the entire driver (as opposed to passing nomodeset to the kernel, which would disable modesetting globally and make it difficult to load amdgpu afterwards). Apparently amdgpu is actually missing this however, so let's add it!

Keep in mind that this currently just lets one enable or disable amdgpu, I haven't bothered adding a headless mode like nouveau has - however I'm sure someone else can add this if needed.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +14 -0
index ebd37fb19cdb..24e6fb4517cc 100644
@@ -872,6 +872,15 @@ MODULE_PARM_DESC(smu_pptable_id,
 	"specify pptable id to be used (-1 = auto(default) value, 0 = use pptable from vbios, > 0 = soft pptable id)");
 module_param_named(smu_pptable_id, amdgpu_smu_pptable_id, int, 0444);
 
+/**
+ * DOC: modeset (int)
+ * Used to enable/disable modesetting for amdgpu exclusively.
+ */
+bool amdgpu_enable_modeset = true;
+MODULE_PARM_DESC(modeset,
+		 "Enable or disable display driver (1 = on (default), 0 = off");
+module_param_named(modeset, amdgpu_enable_modeset, bool, 0444);
+
 /* These devices are not supported by amdgpu.
  * They are supported by the mach64, r128, radeon drivers
  */
@@ -2003,6 +2012,11 @@ static int amdgpu_pci_probe(struct pci_dev *pdev,
 	bool is_fw_fb;
 	resource_size_t base, size;
 
+	if (!amdgpu_enable_modeset) {
+		DRM_INFO("modeset=0 passed to amdgpu, driver will not be enabled\n");
+		return -ENODEV;
+	}
+
 	/* skip devices which are owned by radeon */
 	for (i = 0; i < ARRAY_SIZE(amdgpu_unsupported_pciidlist); i++) {
 		if (amdgpu_unsupported_pciidlist[i] == pdev->device)
Signature · 1 line
2.35.1
#1 lore raw
Quoted 6 lines · Lyude Paul

Many DRM drivers feature a 'modeset' argument, which can be used to enable/disable the entire driver (as opposed to passing nomodeset to the kernel, which would disable modesetting globally and make it difficult to load amdgpu afterwards). Apparently amdgpu is actually missing this however, so let's add it!

You can already do that by passing modprobe.blacklist=amdgpu on the kernel command line. I don't think we need another option to do that.

Quoted 4 lines

Keep in mind that this currently just lets one enable or disable amdgpu, I haven't bothered adding a headless mode like nouveau has - however I'm sure someone else can add this if needed.

You can do this as well by passing an IP block mask which disables the display IP, or media IP, etc.

Alex

Quoted 41 lines
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +14 -1
index ebd37fb19cdb..24e6fb4517cc 100644
@@ -872,6 +872,15 @@ MODULE_PARM_DESC(smu_pptable_id,
        "specify pptable id to be used (-1 = auto(default) value, 0 = use pptable from vbios, > 0 = soft pptable id)");
 module_param_named(smu_pptable_id, amdgpu_smu_pptable_id, int, 0444);
 
+/**
+ * DOC: modeset (int)
+ * Used to enable/disable modesetting for amdgpu exclusively.
+ */
+bool amdgpu_enable_modeset = true;
+MODULE_PARM_DESC(modeset,
+                "Enable or disable display driver (1 = on (default), 0 = off");
+module_param_named(modeset, amdgpu_enable_modeset, bool, 0444);
+
 /* These devices are not supported by amdgpu.
  * They are supported by the mach64, r128, radeon drivers
  */
@@ -2003,6 +2012,11 @@ static int amdgpu_pci_probe(struct pci_dev *pdev,
        bool is_fw_fb;
        resource_size_t base, size;
 
+       if (!amdgpu_enable_modeset) {
+               DRM_INFO("modeset=0 passed to amdgpu, driver will not be enabled\n");
+               return -ENODEV;
+       }
+
        /* skip devices which are owned by radeon */
        for (i = 0; i < ARRAY_SIZE(amdgpu_unsupported_pciidlist); i++) {
                if (amdgpu_unsupported_pciidlist[i] == pdev->device)
--

2.35.1

maintainer
#2 lore raw

Am 11.05.22 um 20:36 schrieb Alex Deucher:

Quoted 8 lines · Lyude Paul
Quoted 5 lines

Many DRM drivers feature a 'modeset' argument, which can be used to enable/disable the entire driver (as opposed to passing nomodeset to the kernel, which would disable modesetting globally and make it difficult to load amdgpu afterwards). Apparently amdgpu is actually missing this however, so let's add it!

You can already do that by passing modprobe.blacklist=amdgpu on the kernel command line. I don't think we need another option to do that.

Yeah, this already came up multiple times and so far we have always rejected it.

Stuffing that into drivers is not a good approach I think. If we want to prevent some device from exposing it's display functionalities we should rather push that into the drm layer.

Regards,
Christian.

Quoted 50 lines
Quoted 5 lines

Keep in mind that this currently just lets one enable or disable amdgpu, I haven't bothered adding a headless mode like nouveau has - however I'm sure someone else can add this if needed.

You can do this as well by passing an IP block mask which disables the display IP, or media IP, etc.

Alex

Quoted 40 lines
---
  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 14 ++++++++++++++
  1 file changed, 14 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +14 -1
index ebd37fb19cdb..24e6fb4517cc 100644
@@ -872,6 +872,15 @@ MODULE_PARM_DESC(smu_pptable_id,
         "specify pptable id to be used (-1 = auto(default) value, 0 = use pptable from vbios, > 0 = soft pptable id)");
  module_param_named(smu_pptable_id, amdgpu_smu_pptable_id, int, 0444);
 
+/**
+ * DOC: modeset (int)
+ * Used to enable/disable modesetting for amdgpu exclusively.
+ */
+bool amdgpu_enable_modeset = true;
+MODULE_PARM_DESC(modeset,
+                "Enable or disable display driver (1 = on (default), 0 = off");
+module_param_named(modeset, amdgpu_enable_modeset, bool, 0444);
+
  /* These devices are not supported by amdgpu.
   * They are supported by the mach64, r128, radeon drivers
   */
@@ -2003,6 +2012,11 @@ static int amdgpu_pci_probe(struct pci_dev *pdev,
         bool is_fw_fb;
         resource_size_t base, size;
 
+       if (!amdgpu_enable_modeset) {
+               DRM_INFO("modeset=0 passed to amdgpu, driver will not be enabled\n");
+               return -ENODEV;
+       }
+
         /* skip devices which are owned by radeon */
         for (i = 0; i < ARRAY_SIZE(amdgpu_unsupported_pciidlist); i++) {
                 if (amdgpu_unsupported_pciidlist[i] == pdev->device)
--

2.35.1

#3 lore raw
Quoted 10 lines · Christian König

Am 11.05.22 um 20:36 schrieb Alex Deucher:

Quoted 8 lines · Lyude Paul
Quoted 5 lines

Many DRM drivers feature a 'modeset' argument, which can be used to enable/disable the entire driver (as opposed to passing nomodeset to the kernel, which would disable modesetting globally and make it difficult to load amdgpu afterwards). Apparently amdgpu is actually missing this however, so let's add it!

You can already do that by passing modprobe.blacklist=amdgpu on the kernel command line. I don't think we need another option to do that.

Quoted 7 lines

Yeah, this already came up multiple times and so far we have always rejected it.

Stuffing that into drivers is not a good approach I think. If we want to prevent some device from exposing it's display functionalities we should rather push that into the drm layer.

Absolutely agree on this. I think what we want is a drm.modeset parameter that would have more precedence than "nomodeset". Because the latter is a built-in parameter and so it can't be disabled at runtime using sysfs.

Signature · 5 lines
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat
#4 lore raw
In reply to Lyude Paul

Hi

Am 11.05.22 um 20:19 schrieb Lyude Paul:

Quoted 5 lines

Many DRM drivers feature a 'modeset' argument, which can be used to enable/disable the entire driver (as opposed to passing nomodeset to the kernel, which would disable modesetting globally and make it difficult to load amdgpu afterwards). Apparently amdgpu is actually missing this however, so let's add it!

We have recently consolidated the handling of the modeset parameter in the macro drm_module_pci_driver_if_modeset(), [1] which has a deprecation warning in the docs. Only a few older drivers use modeset and we don't want to use it further.

Better alternatives are nomodeset or initcall_blacklist=amdgpu_init.

Best regards
Thomas

[1] https://cgit.freedesktop.org/drm/drm-tip/tree/include/drm/drm_module.h#n79

Quoted 42 lines

Keep in mind that this currently just lets one enable or disable amdgpu, I haven't bothered adding a headless mode like nouveau has - however I'm sure someone else can add this if needed.

---
  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 14 ++++++++++++++
  1 file changed, 14 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +14 -0
index ebd37fb19cdb..24e6fb4517cc 100644
@@ -872,6 +872,15 @@ MODULE_PARM_DESC(smu_pptable_id,
  	"specify pptable id to be used (-1 = auto(default) value, 0 = use pptable from vbios, > 0 = soft pptable id)");
  module_param_named(smu_pptable_id, amdgpu_smu_pptable_id, int, 0444);
 
+/**
+ * DOC: modeset (int)
+ * Used to enable/disable modesetting for amdgpu exclusively.
+ */
+bool amdgpu_enable_modeset = true;
+MODULE_PARM_DESC(modeset,
+		 "Enable or disable display driver (1 = on (default), 0 = off");
+module_param_named(modeset, amdgpu_enable_modeset, bool, 0444);
+
  /* These devices are not supported by amdgpu.
   * They are supported by the mach64, r128, radeon drivers
   */
@@ -2003,6 +2012,11 @@ static int amdgpu_pci_probe(struct pci_dev *pdev,
  	bool is_fw_fb;
  	resource_size_t base, size;
 
+	if (!amdgpu_enable_modeset) {
+		DRM_INFO("modeset=0 passed to amdgpu, driver will not be enabled\n");
+		return -ENODEV;
+	}
+
  	/* skip devices which are owned by radeon */
  	for (i = 0; i < ARRAY_SIZE(amdgpu_unsupported_pciidlist); i++) {
  		if (amdgpu_unsupported_pciidlist[i] == pdev->device)
Signature · 6 lines
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Ivo Totev