Skip to contentSkip to conversation

new doubts about bridge qdisc

LARTC Salatiel Filho 1 participant 1 message Oct 8, 2007

lore
Share & tools
lore
#0 lore raw

Ok , let`s go again with shaping a bridge interface. The environment is a dd-wrt firmware router.

I have vlan1 interface connected to the DSL modem , and a br0 interface connecting wired and wireless machines.

lets begin with the doubts , I have [example]:

tc qdisc add dev br0 root handle 1: htb default 999
tc class add dev br0 parent 1: classid 1:999 htb rate 16kbit ceil 16kbit

well , all traffic coming from vlan1[dsl modem] to br0 [wired or wireless] is shaped to 16kbit as expected [default class], but why traffic coming
from the wireless to the wired or the other way around is not shaped ? I like the fact it is not , but i do not understand why not since i still think packets coming from br0 and leaving to br0 still should be shaped since it is doing an outgoing path.

Signature · 9 lines
[]'s
Salatiel

"O maior prazer do inteligente é bancar o  idiota
   diante de um  idiota que banca o inteligente".
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc