wdat_wdt: Problem with WDAT using shared registers
Subsystems (2)
Hi
I want to use the wdat_wdt to support a watchdog of SIONCT (a multi-function device
(mfd)), and I register instructions for wdat_wdt in BIOS, it need registers 0x2e-0x2f
to access the watchdog, then register 0x2e-0x2f will be forever occupied by platform
device wdat_wdt, see the code: https://elixir.bootlin.com/linux/v6.6-rc5/source/drivers/acpi/acpi_watchdog.c#L180
but the 0x2e-0x2f are special, they are used for a multi-function device --SIONCT, the device have many pins can not only support features for watchdog, but also other features like leds, fans, temperature monitor... there are drivers for these pins, e.g. gpio-f7188x, nct6775, w83627hf... these driver use the shared register 0x2e-0x2f.
So the issue happened, the wdat_wdt occupied the shared register 0x2e-0x2f, then the other driver can not load.
Here is the msg I collected from my device:
root@ipc-SIMATIC-IPC-BX-21A:/home/ipc# cat /proc/ioports 0000-0cf7 : PCI Bus 0000:00 0000-001f : dma1 0020-0021 : pic1 002e-002e : wdat_wdt 002f-002f : wdat_wdt
It will cause other SIONCT drivers can not load, e.g.
root@ipc-SIMATIC-IPC-BX-21A:/home/ipc# modprobe gpio-f7188x modprobe: ERROR: could not insert 'gpio_f7188x': No such device
And dmesg info is:
[ 213.559168] gpio-f7188xI/O address 0x002e already in use
Same reason for other drivers:
root@ipc-SIMATIC-IPC-BX-21A:/home/ipc# modprobe nct6775 modprobe: ERROR: could not insert 'nct6775': No such device
Do you have any idea for the wdat_wdt to add support for multi-function device?
BRS
Xing Tong Wu
Guenter Roeck
maintainerQuoted 28 lines · xingtong.wu
Hi
I want to use the
wdat_wdtto support a watchdog of SIONCT (a multi-function device
(mfd)), and I register instructions forwdat_wdtin BIOS, it need registers 0x2e-0x2f
to access the watchdog, then register 0x2e-0x2f will be forever occupied by platform
devicewdat_wdt, see the code: https://elixir.bootlin.com/linux/v6.6-rc5/source/drivers/acpi/acpi_watchdog.c#L180but the 0x2e-0x2f are special, they are used for a multi-function device --SIONCT, the device have many pins can not only support features for watchdog, but also other features like leds, fans, temperature monitor... there are drivers for these pins, e.g. gpio-f7188x, nct6775, w83627hf... these driver use the shared register 0x2e-0x2f.
So the issue happened, the
wdat_wdtoccupied the shared register 0x2e-0x2f, then the other driver can not load.Here is the msg I collected from my device:
root@ipc-SIMATIC-IPC-BX-21A:/home/ipc# cat /proc/ioports 0000-0cf7 : PCI Bus 0000:00 0000-001f : dma1 0020-0021 : pic1 002e-002e : wdat_wdt 002f-002f : wdat_wdtIt will cause other SIONCT drivers can not load, e.g.
root@ipc-SIMATIC-IPC-BX-21A:/home/ipc# modprobe gpio-f7188x modprobe: ERROR: could not insert 'gpio_f7188x': No such device
Quoted 9 lines
And dmesg info is:
[ 213.559168] gpio-f7188xI/O address 0x002e already in useSame reason for other drivers:
root@ipc-SIMATIC-IPC-BX-21A:/home/ipc# modprobe nct6775 modprobe: ERROR: could not insert 'nct6775': No such deviceDo you have any idea for the
wdat_wdtto add support for multi-function device?
In general, it would need to request the 0x2e-0x2f space temporarily and release it when it isn't used. Many other drivers do the same. Look for request_muxed_region() and release_region() in, for example, drivers/watchdog/w83627hf_wdt.c.
However, this is more difficult with ACPI. Device access should either be all through ACPI, or all direct. It doesn't really make much if any sense to access one of the sub-devices through ACPI and others directly because there is no automatic synchronization mechanism between ACPI and the rest of the kernel. If ACPI reserves the 0x2e-0x2f space, it owns it, period.
Note: There can only be one device at 0x2e/0x2f. I don't really understand the reference to both nct6775 and f7188 because it is simply not possible that both reside at that address at the same time. And if there is a nct6775 or f7188 compatible chip in the system, it would make much more sense to use the chip specific watchdog drivers instead of wdat_wdt - again, ACPI takes it all, and doesn't like competition.
Guenter