mmc: pic32: Refresh PIC32 MMC driver
PATCH v3 2/4 mmc: pic32: Refresh PIC32 MMC driver
The GPIO pins used by the SDHCI controller need to be configured to allow the interface to work.
Signed-off-by John Robertson <[email protected]>
---
drivers/pinctrl/pinctrl_pic32.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
drivers/pinctrl/pinctrl_pic32.c +28 -0
@@ -222,6 +222,31 @@ static void pic32_eth_pin_config(struct udevice *dev)pic32_pinconfig_set (priv, configs,ARRAY_SIZE (configs)); } +static void pic32_sdhci_pin_config (struct udevice *dev) +{ +struct pic32_pinctrl_priv *priv =dev_get_priv (dev); +const struct pic32_pin_config configs[] = { +/* SDWP - H2 */ +PIN_CONFIG (PIC32_PORT_H ,2 ,PIN_CONFIG_PIC32_DIGITAL ), +/* SDCD - A0 */ +PIN_CONFIG (PIC32_PORT_A ,0 ,PIN_CONFIG_PIC32_DIGITAL ), +/* SDCMD - D4 */ +PIN_CONFIG (PIC32_PORT_D ,4 ,PIN_CONFIG_PIC32_DIGITAL ), +/* SDCK - A6 */ +PIN_CONFIG (PIC32_PORT_A ,6 ,PIN_CONFIG_PIC32_DIGITAL ), +/* SDDATA0 - G13 */ +PIN_CONFIG (PIC32_PORT_G ,13 ,PIN_CONFIG_PIC32_DIGITAL ), +/* SDDATA1 - G12 */ +PIN_CONFIG (PIC32_PORT_G ,12 ,PIN_CONFIG_PIC32_DIGITAL ), +/* SDDATA2 - G14 */ +PIN_CONFIG (PIC32_PORT_G ,14 ,PIN_CONFIG_PIC32_DIGITAL ), +/* SDDATA3 - A7 */ +PIN_CONFIG (PIC32_PORT_A ,7 ,PIN_CONFIG_PIC32_DIGITAL ), + }; + +pic32_pinconfig_set (priv, configs,ARRAY_SIZE (configs)); +} +static int pic32_pinctrl_request (struct udevice *dev,int func,int flags) {struct pic32_pinctrl_priv *priv =dev_get_priv (dev);
@@ -240,6 +265,9 @@ static int pic32_pinctrl_request(struct udevice *dev, int func, int flags)case PERIPH_ID_ETH :pic32_eth_pin_config (dev);break ; +case PERIPH_ID_SDHCI : +pic32_sdhci_pin_config (dev); +break ;default :debug ("%s: unknown-unhandled case\n" , __func__);break ;
Signature · 1 line
2.28.0
PATCH v3 2/4 mmc: pic32: Refresh PIC32 MMC driver
Am Dienstag, den 01.09.2020, 02:55 +0000 schrieb John Robertson:
Quoted 9 lines
The GPIO pins used by the SDHCI controller need to be configured to allow the interface to work.
Signed-off-by John Robertson <[email protected]>---
drivers/pinctrl/pinctrl_pic32.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
applied to u-boot-mips/fixes, thanks.
Note: I've updated the commit subject to "pinmux: pic32: add SDHCI pin config"
Signature · 1 line
- Daniel