Skip to contentSkip to conversation

ethdev: add more protocol support in flow API

PATCH Superseded Wang Ying A 5 participants 14 messages Aug 14, 2019 – Oct 1, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ethdev: add more protocol support in flow API

Add new protocol header match support as below

RTE_FLOW_ITEM_TYPE_GTP_PSC
- matches a GTP PDU extension header (type is 0x85:
PDU Session Container)
RTE_FLOW_ITEM_TYPE_PPPOES
- matches a PPPoE Session header.
RTE_FLOW_ITEM_TYPE_PPPOED
- matches a PPPoE Discovery stage header.

Change-Id I9da6f2c32aca5611ab5a7bb2699f2ad6d3071c59
---
 app/test-pmd/cmdline_flow.c                 | 80 +++++++++++++++++++++++++++++
 doc/guides/prog_guide/rte_flow.rst          | 25 +++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 10 ++++
 lib/librte_ethdev/rte_flow.c                |  3 ++
 lib/librte_ethdev/rte_flow.h                | 71 +++++++++++++++++++++++++
 5 files changed, 189 insertions(+)
app/test-pmd/cmdline_flow.c +80 -0
index 495871394..79bce43e7 100644
@@ -167,6 +167,13 @@ enum index {
 	ITEM_GTP_TEID,
 	ITEM_GTPC,
 	ITEM_GTPU,
+	ITEM_GTP_PSC,
+	ITEM_GTP_PSC_QFI,
+	ITEM_GTP_PSC_PDU_T,
+	ITEM_PPPOES,
+	ITEM_PPPOED,
+	ITEM_PPPOE_SEID,
+	ITEM_PPPOE_PROTO,
 	ITEM_GENEVE,
 	ITEM_GENEVE_VNI,
 	ITEM_GENEVE_PROTO,
@@ -651,6 +658,9 @@ static const enum index next_item[] = {
 	ITEM_GTP,
 	ITEM_GTPC,
 	ITEM_GTPU,
+	ITEM_GTP_PSC,
+	ITEM_PPPOES,
+	ITEM_PPPOED,
 	ITEM_GENEVE,
 	ITEM_VXLAN_GPE,
 	ITEM_ARP_ETH_IPV4,
@@ -831,6 +841,20 @@ static const enum index item_gtp[] = {
 	ZERO,
 };
 
+static const enum index item_gtp_psc[] = {
+	ITEM_GTP_PSC_QFI,
+	ITEM_GTP_PSC_PDU_T,
+	ITEM_NEXT,
+	ZERO,
+};
+
+static const enum index item_pppoe[] = {
+	ITEM_PPPOE_SEID,
+	ITEM_PPPOE_PROTO,
+	ITEM_NEXT,
+	ZERO,
+};
+
 static const enum index item_geneve[] = {
 	ITEM_GENEVE_VNI,
 	ITEM_GENEVE_PROTO,
@@ -2108,6 +2132,56 @@ static const struct token token_list[] = {
 		.next = NEXT(item_gtp),
 		.call = parse_vc,
 	},
+	[ITEM_GTP_PSC] = {
+		.name = "gtp_psc",
+		.help = "match GTP extension header (type is 0x85)",
+		.priv = PRIV_ITEM(GTP_PSC,
+				sizeof(struct rte_flow_item_gtp_psc)),
+		.next = NEXT(item_gtp_psc),
+		.call = parse_vc,
+	},
+	[ITEM_GTP_PSC_QFI] = {
+		.name = "qfi",
+		.help = "QoS flow identifier",
+		.next = NEXT(item_gtp_psc, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gtp_psc,
+					qfi)),
+	},
+	[ITEM_GTP_PSC_PDU_T] = {
+		.name = "pdu_t",
+		.help = "PDU type",
+		.next = NEXT(item_gtp_psc, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gtp_psc,
+					pdu_type)),
+	},
+	[ITEM_PPPOES] = {
+		.name = "pppoes",
+		.help = "match PPPoE Session header",
+		.priv = PRIV_ITEM(PPPOES, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoe),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOED] = {
+		.name = "pppoed",
+		.help = "match PPPoE Discovery stage header",
+		.priv = PRIV_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoe),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOE_SEID] = {
+		.name = "seid",
+		.help = "Session identifier",
+		.next = NEXT(item_pppoe, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_pppoe,
+					session_id)),
+	},
+	[ITEM_PPPOE_PROTO] = {
+		.name = "proto_id",
+		.help = "PPPOE protocol identifier",
+		.next = NEXT(item_pppoe, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_pppoe,
+					proto_id)),
+	},
 	[ITEM_GENEVE] = {
 		.name = "geneve",
 		.help = "match GENEVE header",
@@ -5753,6 +5827,12 @@ flow_item_default_mask(const struct rte_flow_item *item)
 	case RTE_FLOW_ITEM_TYPE_GTP:
 		mask = &rte_flow_item_gtp_mask;
 		break;
+	case RTE_FLOW_ITEM_TYPE_GTP_PSC:
+		mask = &rte_flow_item_gtp_psc_mask;
+		break;
+	case RTE_FLOW_ITEM_TYPE_PPPOES:
+		mask = &rte_flow_item_pppoe_mask;
+		break;
 	case RTE_FLOW_ITEM_TYPE_ESP:
 		mask = &rte_flow_item_esp_mask;
 		break;
doc/guides/prog_guide/rte_flow.rst +25 -0
index 821b524b3..d09c42071 100644
@@ -1055,6 +1055,31 @@ flow rules.
 - ``teid``: tunnel endpoint identifier.
 - Default ``mask`` matches teid only.
 
+Item: ``GTP_PSC``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches a GTP Extension header (type is 0x85).
+
+- ``pdu_type``: PDU type.
+- ``qfi``: QoS flow identifier.
+- Default ``mask`` matches QFI only.
+
+Item: ``PPPOES``, ``PPPOED``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches a PPPOE header.
+
+Note: PPPOES and PPPOED use the same structure. PPPOES and PPPOED item
+are defined for a user-friendly API when creating PPPOE-Session and
+PPPOE-Discovery flow rules.
+
+- ``v_t_flags``: version (4b), type (4b).
+- ``code``: Message type.
+- ``session_id``: Session identifier.
+- ``length``: Payload length.
+- ``proto_id``: PPP Protocol identifier.
+- Default ``mask`` matches session_id,proto_id.
+
 Item: ``ESP``
 ^^^^^^^^^^^^^
 
doc/guides/testpmd_app_ug/testpmd_funcs.rst +10 -0
index 313e0707e..0da36d5f1 100644
@@ -3904,6 +3904,16 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``teid {unsigned}``: tunnel endpoint identifier.
 
+- ``gtp_psc``: match GTPv1 entension header (type is 0x85).
+
+  - ``pdu_type {unsigned}``: PDU type (0 or 1).
+  - ``qfi {unsigned}``: QoS flow identifier.
+
+- ``pppoes``, ``pppoed``: match PPPOE header.
+
+  - ``session_id {unsigned}``: Session identifier.
+  - ``proto_id {unsigned}``: PPP Protocol identifier.
+
 - ``geneve``: match GENEVE header.
 
   - ``vni {unsigned}``: virtual network identifier.
lib/librte_ethdev/rte_flow.c +3 -0
index 18fcb018e..246390da3 100644
@@ -59,6 +59,9 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(GTP, sizeof(struct rte_flow_item_gtp)),
 	MK_FLOW_ITEM(GTPC, sizeof(struct rte_flow_item_gtp)),
 	MK_FLOW_ITEM(GTPU, sizeof(struct rte_flow_item_gtp)),
+	MK_FLOW_ITEM(GTP_PSC, sizeof(struct rte_flow_item_gtp_psc)),
+	MK_FLOW_ITEM(PPPOES, sizeof(struct rte_flow_item_pppoe)),
+	MK_FLOW_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
 	MK_FLOW_ITEM(ESP, sizeof(struct rte_flow_item_esp)),
 	MK_FLOW_ITEM(GENEVE, sizeof(struct rte_flow_item_geneve)),
 	MK_FLOW_ITEM(VXLAN_GPE, sizeof(struct rte_flow_item_vxlan_gpe)),
lib/librte_ethdev/rte_flow.h +71 -0

83 lines not on this page · raw message

Signature · 1 line
2.15.1
#1 lore raw

PATCH v2 1/1 ethdev: add more protocol support in flow API

Add new protocol header match support as below

RTE_FLOW_ITEM_TYPE_GTP_PSC
- matches a GTP PDU extension header (type is 0x85:
PDU Session Container)
RTE_FLOW_ITEM_TYPE_PPPOES
- matches a PPPoE Session header.
RTE_FLOW_ITEM_TYPE_PPPOED
- matches a PPPoE Discovery stage header.

---
---
v2: Remove Gerrit Change-Id's.

---
 app/test-pmd/cmdline_flow.c                 | 80 +++++++++++++++++++++++++++++
 doc/guides/prog_guide/rte_flow.rst          | 25 +++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 10 ++++
 lib/librte_ethdev/rte_flow.c                |  3 ++
 lib/librte_ethdev/rte_flow.h                | 71 +++++++++++++++++++++++++
 5 files changed, 189 insertions(+)
app/test-pmd/cmdline_flow.c +80 -0
index 495871394..79bce43e7 100644
@@ -167,6 +167,13 @@ enum index {
 	ITEM_GTP_TEID,
 	ITEM_GTPC,
 	ITEM_GTPU,
+	ITEM_GTP_PSC,
+	ITEM_GTP_PSC_QFI,
+	ITEM_GTP_PSC_PDU_T,
+	ITEM_PPPOES,
+	ITEM_PPPOED,
+	ITEM_PPPOE_SEID,
+	ITEM_PPPOE_PROTO,
 	ITEM_GENEVE,
 	ITEM_GENEVE_VNI,
 	ITEM_GENEVE_PROTO,
@@ -651,6 +658,9 @@ static const enum index next_item[] = {
 	ITEM_GTP,
 	ITEM_GTPC,
 	ITEM_GTPU,
+	ITEM_GTP_PSC,
+	ITEM_PPPOES,
+	ITEM_PPPOED,
 	ITEM_GENEVE,
 	ITEM_VXLAN_GPE,
 	ITEM_ARP_ETH_IPV4,
@@ -831,6 +841,20 @@ static const enum index item_gtp[] = {
 	ZERO,
 };
 
+static const enum index item_gtp_psc[] = {
+	ITEM_GTP_PSC_QFI,
+	ITEM_GTP_PSC_PDU_T,
+	ITEM_NEXT,
+	ZERO,
+};
+
+static const enum index item_pppoe[] = {
+	ITEM_PPPOE_SEID,
+	ITEM_PPPOE_PROTO,
+	ITEM_NEXT,
+	ZERO,
+};
+
 static const enum index item_geneve[] = {
 	ITEM_GENEVE_VNI,
 	ITEM_GENEVE_PROTO,
@@ -2108,6 +2132,56 @@ static const struct token token_list[] = {
 		.next = NEXT(item_gtp),
 		.call = parse_vc,
 	},
+	[ITEM_GTP_PSC] = {
+		.name = "gtp_psc",
+		.help = "match GTP extension header (type is 0x85)",
+		.priv = PRIV_ITEM(GTP_PSC,
+				sizeof(struct rte_flow_item_gtp_psc)),
+		.next = NEXT(item_gtp_psc),
+		.call = parse_vc,
+	},
+	[ITEM_GTP_PSC_QFI] = {
+		.name = "qfi",
+		.help = "QoS flow identifier",
+		.next = NEXT(item_gtp_psc, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gtp_psc,
+					qfi)),
+	},
+	[ITEM_GTP_PSC_PDU_T] = {
+		.name = "pdu_t",
+		.help = "PDU type",
+		.next = NEXT(item_gtp_psc, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gtp_psc,
+					pdu_type)),
+	},
+	[ITEM_PPPOES] = {
+		.name = "pppoes",
+		.help = "match PPPoE Session header",
+		.priv = PRIV_ITEM(PPPOES, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoe),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOED] = {
+		.name = "pppoed",
+		.help = "match PPPoE Discovery stage header",
+		.priv = PRIV_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoe),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOE_SEID] = {
+		.name = "seid",
+		.help = "Session identifier",
+		.next = NEXT(item_pppoe, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_pppoe,
+					session_id)),
+	},
+	[ITEM_PPPOE_PROTO] = {
+		.name = "proto_id",
+		.help = "PPPOE protocol identifier",
+		.next = NEXT(item_pppoe, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_pppoe,
+					proto_id)),
+	},
 	[ITEM_GENEVE] = {
 		.name = "geneve",
 		.help = "match GENEVE header",
@@ -5753,6 +5827,12 @@ flow_item_default_mask(const struct rte_flow_item *item)
 	case RTE_FLOW_ITEM_TYPE_GTP:
 		mask = &rte_flow_item_gtp_mask;
 		break;
+	case RTE_FLOW_ITEM_TYPE_GTP_PSC:
+		mask = &rte_flow_item_gtp_psc_mask;
+		break;
+	case RTE_FLOW_ITEM_TYPE_PPPOES:
+		mask = &rte_flow_item_pppoe_mask;
+		break;
 	case RTE_FLOW_ITEM_TYPE_ESP:
 		mask = &rte_flow_item_esp_mask;
 		break;
doc/guides/prog_guide/rte_flow.rst +25 -0
index 821b524b3..d09c42071 100644
@@ -1055,6 +1055,31 @@ flow rules.
 - ``teid``: tunnel endpoint identifier.
 - Default ``mask`` matches teid only.
 
+Item: ``GTP_PSC``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches a GTP Extension header (type is 0x85).
+
+- ``pdu_type``: PDU type.
+- ``qfi``: QoS flow identifier.
+- Default ``mask`` matches QFI only.
+
+Item: ``PPPOES``, ``PPPOED``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches a PPPOE header.
+
+Note: PPPOES and PPPOED use the same structure. PPPOES and PPPOED item
+are defined for a user-friendly API when creating PPPOE-Session and
+PPPOE-Discovery flow rules.
+
+- ``v_t_flags``: version (4b), type (4b).
+- ``code``: Message type.
+- ``session_id``: Session identifier.
+- ``length``: Payload length.
+- ``proto_id``: PPP Protocol identifier.
+- Default ``mask`` matches session_id,proto_id.
+
 Item: ``ESP``
 ^^^^^^^^^^^^^
 
doc/guides/testpmd_app_ug/testpmd_funcs.rst +10 -0
index 313e0707e..0da36d5f1 100644
@@ -3904,6 +3904,16 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``teid {unsigned}``: tunnel endpoint identifier.
 
+- ``gtp_psc``: match GTPv1 entension header (type is 0x85).
+
+  - ``pdu_type {unsigned}``: PDU type (0 or 1).
+  - ``qfi {unsigned}``: QoS flow identifier.
+
+- ``pppoes``, ``pppoed``: match PPPOE header.
+
+  - ``session_id {unsigned}``: Session identifier.
+  - ``proto_id {unsigned}``: PPP Protocol identifier.
+
 - ``geneve``: match GENEVE header.
 
   - ``vni {unsigned}``: virtual network identifier.
lib/librte_ethdev/rte_flow.c +3 -0
index 18fcb018e..246390da3 100644
@@ -59,6 +59,9 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(GTP, sizeof(struct rte_flow_item_gtp)),
 	MK_FLOW_ITEM(GTPC, sizeof(struct rte_flow_item_gtp)),
 	MK_FLOW_ITEM(GTPU, sizeof(struct rte_flow_item_gtp)),
+	MK_FLOW_ITEM(GTP_PSC, sizeof(struct rte_flow_item_gtp_psc)),
+	MK_FLOW_ITEM(PPPOES, sizeof(struct rte_flow_item_pppoe)),
+	MK_FLOW_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
 	MK_FLOW_ITEM(ESP, sizeof(struct rte_flow_item_esp)),
 	MK_FLOW_ITEM(GENEVE, sizeof(struct rte_flow_item_geneve)),
 	MK_FLOW_ITEM(VXLAN_GPE, sizeof(struct rte_flow_item_vxlan_gpe)),
lib/librte_ethdev/rte_flow.h +71 -0

83 lines not on this page · raw message

Signature · 1 line
2.15.1
#2 lore raw

Hi Wang Ying,

Quoted 11 lines · Wang Ying A

Add new protocol header match support as below

RTE_FLOW_ITEM_TYPE_GTP_PSC
- matches a GTP PDU extension header (type is 0x85:
PDU Session Container)
RTE_FLOW_ITEM_TYPE_PPPOES
- matches a PPPoE Session header.
RTE_FLOW_ITEM_TYPE_PPPOED
- matches a PPPoE Discovery stage header.

OK, please split this patch, one for GTP and the other for PPPoE to make title less vague than "add more protocol support".

For PPPoE, the distinction between session and discovery is not a bad idea but since discovery packets typically have a different format (tags in place of protocol), I'm not sure they should share a common structure.

How about a single "PPPOE" item without proto_id to cover both session and discovery, then later add separate tag items on a needed basis for each possible/optional tag (e.g. PPPOE_TAG_SERVICE_NAME)? Likewise proto_id would be provided through a separate optional item if relevant (PPPOE_PROTO_ID). Such an approach is already used for IPV6 and IPV6_EXT.

Another benefit is that applications could match PPPoE regardless of session or discovery when they do not care, while PPPOED/PPPOES make that distinction mandatory.

Also by inserting new entries in the middle of the pattern items list, this patch breaks ABI. I think it's not on purpose, so please move them to the end (not grouping them with existing GTP stuff is fine, ABI compat is more important.) This must be reflected in rte_flow.h, rte_flow.c, testpmd and documentation.

More nits below.

Quoted 12 lines

---
---
v2: Remove Gerrit Change-Id's.

---
 app/test-pmd/cmdline_flow.c                 | 80 +++++++++++++++++++++++++++++
 doc/guides/prog_guide/rte_flow.rst          | 25 +++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 10 ++++
 lib/librte_ethdev/rte_flow.c                |  3 ++
 lib/librte_ethdev/rte_flow.h                | 71 +++++++++++++++++++++++++
 5 files changed, 189 insertions(+)
app/test-pmd/cmdline_flow.c +0 -0

[...]

app/test-pmd/cmdline_flow.c static const struct token token_list[] = { · line 2159

Quoted 3 lines
app/test-pmd/cmdline_flow.c +3 -0
+	[ITEM_PPPOES] = {
+		.name = "pppoes",
+		.help = "match PPPoE Session header",

Session => session

app/test-pmd/cmdline_flow.c static const struct token token_list[] = { · line 2166

Quoted 7 lines
app/test-pmd/cmdline_flow.c +7 -0
+		.priv = PRIV_ITEM(PPPOES, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoe),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOED] = {
+		.name = "pppoed",
+		.help = "match PPPoE Discovery stage header",

Discovery => discovery

app/test-pmd/cmdline_flow.c static const struct token token_list[] = { · line 2173

Quoted 7 lines
app/test-pmd/cmdline_flow.c +7 -0
+		.priv = PRIV_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoe),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOE_SEID] = {
+		.name = "seid",
+		.help = "Session identifier",

Session => session

[...]

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1059

Quoted 10 lines
doc/guides/prog_guide/rte_flow.rst +2 -0
index 821b524b3..d09c42071 100644
@@ -1055,6 +1055,31 @@ flow rules.
 - ``teid``: tunnel endpoint identifier.
 - Default ``mask`` matches teid only.
 
+Item: ``GTP_PSC``
+^^^^^^^^^^^^^^^^^^^^^^^

Too many "^^^"'s.

[...]

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1070

Quoted 4 lines
doc/guides/prog_guide/rte_flow.rst +4 -0
+Item: ``PPPOES``, ``PPPOED``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches a PPPOE header.

PPPOE => PPPoE

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1065

Quoted 2 lines
doc/guides/prog_guide/rte_flow.rst +2 -0
+
+Note: PPPOES and PPPOED use the same structure. PPPOES and PPPOED item

item => items (or better, "pattern items")

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1074

Quoted 2 lines
doc/guides/prog_guide/rte_flow.rst +2 -0
+are defined for a user-friendly API when creating PPPOE-Session and
+PPPOE-Discovery flow rules.

Super nit: use "PPPoE" when mentioning the protocol itself and "PPPOE" when mentioning the pattern item.

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1069

Quoted 2 lines
doc/guides/prog_guide/rte_flow.rst +2 -0
+
+- ``v_t_flags``: version (4b), type (4b).

Why "flags"? I don't see any so you could name it "version_type" (same in documentation).

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1077

Quoted 1 line
doc/guides/prog_guide/rte_flow.rst +1 -0
+- ``code``: Message type.

Message => message

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1078

Quoted 1 line
doc/guides/prog_guide/rte_flow.rst +1 -0
+- ``session_id``: Session identifier.

Session => session

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1079

Quoted 1 line
doc/guides/prog_guide/rte_flow.rst +1 -0
+- ``length``: Payload length.

Payload => payload

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1080

Quoted 1 line
doc/guides/prog_guide/rte_flow.rst +1 -0
+- ``proto_id``: PPP Protocol identifier.

Protocol => protocol

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1081

Quoted 1 line
doc/guides/prog_guide/rte_flow.rst +1 -0
+- Default ``mask`` matches session_id,proto_id.

Missing space between session_id and proto_id.

Quoted 9 lines
doc/guides/prog_guide/rte_flow.rst +1 -0
+
 Item: ``ESP``
 ^^^^^^^^^^^^^
 
doc/guides/testpmd_app_ug/testpmd_funcs.rst +0 -0
index 313e0707e..0da36d5f1 100644

doc/guides/testpmd_app_ug/testpmd_funcs.rst This section lists supported pattern items and their attributes, if any. · line 3912

Quoted 9 lines
doc/guides/testpmd_app_ug/testpmd_funcs.rst +6 -0
@@ -3904,6 +3904,16 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``teid {unsigned}``: tunnel endpoint identifier.
 
+- ``gtp_psc``: match GTPv1 entension header (type is 0x85).
+
+  - ``pdu_type {unsigned}``: PDU type (0 or 1).
+  - ``qfi {unsigned}``: QoS flow identifier.
+
+- ``pppoes``, ``pppoed``: match PPPOE header.

PPPOE => PPPoE

[...]

lib/librte_ethdev/rte_flow.h enum rte_flow_item_type { · line 333

Quoted 11 lines
lib/librte_ethdev/rte_flow.h +3 -0
index b66bf1495..ad5e46190 100644
@@ -328,6 +328,34 @@ enum rte_flow_item_type {
 	 */
 	RTE_FLOW_ITEM_TYPE_GTPU,
 
+	/**
+	 * Matches a GTP PDU extension header (type is 0x85:
+	 * PDU Session Container).

Session Container => session container

lib/librte_ethdev/rte_flow.h enum rte_flow_item_type { · line 344

Quoted 11 lines
lib/librte_ethdev/rte_flow.h +11 -0
+	 *
+	 * Configure flow for GTP packets with extension header type 0x85.
+	 *
+	 * See struct rte_flow_item_gtp_psc.
+	 */
+	RTE_FLOW_ITEM_TYPE_GTP_PSC,
+
+	/**
+	 * Matches a PPPOE header.
+	 *
+	 * Configure flow for PPPoE Session packets.

Session => session

lib/librte_ethdev/rte_flow.h enum rte_flow_item_type { · line 353

Quoted 9 lines
lib/librte_ethdev/rte_flow.h +9 -0
+	 *
+	 * See struct rte_flow_item_pppoe.
+	 */
+	RTE_FLOW_ITEM_TYPE_PPPOES,
+
+	/**
+	 * Matches a PPPOE header.
+	 *
+	 * Configure flow for PPPoE Discovery stage packets.

Discovery => discovery

Quoted 9 lines
lib/librte_ethdev/rte_flow.h +5 -0
+	 *
+	 * See struct rte_flow_item_pppoe.
+	 */
+	RTE_FLOW_ITEM_TYPE_PPPOED,
+
 	/**
 	 * Matches a ESP header.
 	 *

lib/librte_ethdev/rte_flow.h static const struct rte_flow_item_gtp rte_flow_item_gtp_mask = { · line 957

Quoted 8 lines
lib/librte_ethdev/rte_flow.h +5 -0
@@ -922,6 +950,49 @@ static const struct rte_flow_item_gtp rte_flow_item_gtp_mask = {
 };
 #endif
 
+/**
+ * RTE_FLOW_ITEM_TYPE_GTP_PSC.
+ *
+ * Matches a GTP-extension header
+ * (type is 0x85: PDU Session Container).

Session Container => session container

(crusade against superfluous caps!)

[...]

lib/librte_ethdev/rte_flow.h static const struct rte_flow_item_gtp rte_flow_item_gtp_mask = { · line 981

Quoted 10 lines
lib/librte_ethdev/rte_flow.h +10 -0
+/**
+ * RTE_FLOW_ITEM_TYPE_PPPOE.
+ *
+ * Matches a PPPOE header.
+ */
+struct rte_flow_item_pppoe {
+	/**
+	 * Version (4b), type (4b).
+	 */
+	uint8_t v_t_flags;

v_t_flags => version_type

lib/librte_ethdev/rte_flow.h static const struct rte_flow_item_gtp rte_flow_item_gtp_mask = { · line 985

Quoted 4 lines
lib/librte_ethdev/rte_flow.h +4 -0
+	uint8_t code; /**< Message type. */
+	rte_be16_t session_id; /**< Session identifier. */
+	rte_be16_t length; /**< Payload length. */
+	rte_be16_t proto_id; /**< PPP Protocol identifier. */

As discussed, I suggest dropping proto_id to make this a generic match for PPPoE.

lib/librte_ethdev/rte_flow.h static const struct rte_flow_item_gtp rte_flow_item_gtp_mask = { · line 993

Quoted 8 lines
lib/librte_ethdev/rte_flow.h +8 -0
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_PPPOE. */
+#ifndef __cplusplus
+static const struct rte_flow_item_pppoe rte_flow_item_pppoe_mask = {
+	.session_id = RTE_BE16(0xffff),
+	.proto_id = RTE_BE16(0xffff),
+};

I think the default for PPPoE should be an empty mask that simply says "match PPPoE" since session_id only becomes known after negotiation and proto_id shouldn't be part of this object.

Signature · 2 lines
Adrien Mazarguil
6WIND
#3 lore raw
Quoted 33 lines

-----Original Message-----
From: Adrien Mazarguil [mailto:[email protected]]
Sent: Wednesday, August 14, 2019 5:08 PM
To: Wang, Ying A <[email protected]>
Cc: Zhang, Qi Z <[email protected]>; Ye, Xiaolong <[email protected]>; Yang, Qiming <[email protected]>; [email protected]
Subject: Re: [dpdk-dev] [PATCH v2] ethdev: add more protocol support in flow API

Hi Wang Ying,

Quoted 11 lines · Wang Ying A

Add new protocol header match support as below

RTE_FLOW_ITEM_TYPE_GTP_PSC
- matches a GTP PDU extension header (type is 0x85:
PDU Session Container)
RTE_FLOW_ITEM_TYPE_PPPOES
- matches a PPPoE Session header.
RTE_FLOW_ITEM_TYPE_PPPOED
- matches a PPPoE Discovery stage header.

OK, please split this patch, one for GTP and the other for PPPoE to make title less vague than "add more protocol support".

For PPPoE, the distinction between session and discovery is not a bad idea but since discovery packets typically have a different format (tags in place of protocol), I'm not sure they should share a common structure.

Quoted 5 lines

How about a single "PPPOE" item without proto_id to cover both session and discovery, then later add separate tag items on a needed basis for each possible/optional tag (e.g. PPPOE_TAG_SERVICE_NAME)? Likewise proto_id would be provided through a separate optional item if relevant (PPPOE_PROTO_ID).

PPPoE Discovery had PPPoE Session has different ethertype 0x8863 , 0x8864, so I think they should belong to separate match item,( image the case we only need to match a PPPoE Session flow but don't care what kind of protocol payload it have ) but I agree they should only share the common part of the header,
then for PPPoED, it can append optional PPPoE Tag item(s) and for PPPoES , it can append optional PPPoE Protocol item(s)

Quoted 238 lines

Such an approach is already used for IPV6 and IPV6_EXT.

Another benefit is that applications could match PPPoE regardless of session or discovery when they do not care, while PPPOED/PPPOES make that distinction mandatory.

Also by inserting new entries in the middle of the pattern items list, this patch breaks ABI. I think it's not on purpose, so please move them to the end (not grouping them with existing GTP stuff is fine, ABI compat is more important.) This must be reflected in rte_flow.h, rte_flow.c, testpmd and documentation.

More nits below.

Quoted 5 lines

---
---
v2: Remove Gerrit Change-Id's.

---
 app/test-pmd/cmdline_flow.c                 | 80

+++++++++++++++++++++++++++++

Quoted 4 lines
 doc/guides/prog_guide/rte_flow.rst          | 25 +++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 10 ++++
 lib/librte_ethdev/rte_flow.c                |  3 ++
 lib/librte_ethdev/rte_flow.h                | 71

+++++++++++++++++++++++++

Quoted 3 lines
 5 files changed, 189 insertions(+)
app/test-pmd/cmdline_flow.c +0 -0

[...]

app/test-pmd/cmdline_flow.c static const struct token token_list[] = { · line 2159

Quoted 3 lines
app/test-pmd/cmdline_flow.c +3 -0
+	[ITEM_PPPOES] = {
+		.name = "pppoes",
+		.help = "match PPPoE Session header",

Session => session

app/test-pmd/cmdline_flow.c static const struct token token_list[] = { · line 2166

Quoted 7 lines
app/test-pmd/cmdline_flow.c +7 -0
+		.priv = PRIV_ITEM(PPPOES, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoe),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOED] = {
+		.name = "pppoed",
+		.help = "match PPPoE Discovery stage header",

Discovery => discovery

app/test-pmd/cmdline_flow.c static const struct token token_list[] = { · line 2173

Quoted 7 lines
app/test-pmd/cmdline_flow.c +7 -0
+		.priv = PRIV_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoe),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOE_SEID] = {
+		.name = "seid",
+		.help = "Session identifier",

Session => session

[...]

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1059

Quoted 11 lines
doc/guides/prog_guide/rte_flow.rst +2 -0
index 821b524b3..d09c42071 100644
@@ -1055,6 +1055,31 @@ flow rules.
 - ``teid``: tunnel endpoint identifier.
 - Default ``mask`` matches teid only.
 
+Item: ``GTP_PSC``
+^^^^^^^^^^^^^^^^^^^^^^^

Too many "^^^"'s.

[...]

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1070

Quoted 4 lines
doc/guides/prog_guide/rte_flow.rst +4 -0
+Item: ``PPPOES``, ``PPPOED``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches a PPPOE header.

PPPOE => PPPoE

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1066

Quoted 3 lines
doc/guides/prog_guide/rte_flow.rst +3 -0
+
+Note: PPPOES and PPPOED use the same structure. PPPOES and PPPOED
+item

item => items (or better, "pattern items")

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1074

Quoted 2 lines
doc/guides/prog_guide/rte_flow.rst +2 -0
+are defined for a user-friendly API when creating PPPOE-Session and
+PPPOE-Discovery flow rules.

Super nit: use "PPPoE" when mentioning the protocol itself and "PPPOE" when mentioning the pattern item.

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1070

Quoted 2 lines
doc/guides/prog_guide/rte_flow.rst +2 -0
+
+- ``v_t_flags``: version (4b), type (4b).

Why "flags"? I don't see any so you could name it "version_type" (same in documentation).

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1077

Quoted 1 line
doc/guides/prog_guide/rte_flow.rst +1 -0
+- ``code``: Message type.

Message => message

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1078

Quoted 1 line
doc/guides/prog_guide/rte_flow.rst +1 -0
+- ``session_id``: Session identifier.

Session => session

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1079

Quoted 1 line
doc/guides/prog_guide/rte_flow.rst +1 -0
+- ``length``: Payload length.

Payload => payload

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1080

Quoted 1 line
doc/guides/prog_guide/rte_flow.rst +1 -0
+- ``proto_id``: PPP Protocol identifier.

Protocol => protocol

doc/guides/prog_guide/rte_flow.rst flow rules. · line 1081

Quoted 1 line
doc/guides/prog_guide/rte_flow.rst +1 -0
+- Default ``mask`` matches session_id,proto_id.

Missing space between session_id and proto_id.

doc/guides/testpmd_app_ug/testpmd_funcs.rst This section lists supported pattern items and

Quoted 10 lines
doc/guides/prog_guide/rte_flow.rst +1 -0
+
 Item: ``ESP``
 ^^^^^^^^^^^^^
 
doc/guides/testpmd_app_ug/testpmd_funcs.rst +0 -0
index 313e0707e..0da36d5f1 100644
@@ -3904,6 +3904,16 @@ This section lists supported pattern items and

their attributes, if any.

doc/guides/testpmd_app_ug/testpmd_funcs.rst This section lists supported pattern items and their attributes, if any. · line 3912

Quoted 9 lines
doc/guides/testpmd_app_ug/testpmd_funcs.rst +6 -0
   - ``teid {unsigned}``: tunnel endpoint identifier.
 
+- ``gtp_psc``: match GTPv1 entension header (type is 0x85).
+
+  - ``pdu_type {unsigned}``: PDU type (0 or 1).
+  - ``qfi {unsigned}``: QoS flow identifier.
+
+- ``pppoes``, ``pppoed``: match PPPOE header.

PPPOE => PPPoE

[...]

lib/librte_ethdev/rte_flow.h enum rte_flow_item_type { · line 333

Quoted 11 lines
(quoted diff) +0 -0

b/lib/librte_ethdev/rte_flow.h index b66bf1495..ad5e46190 100644

lib/librte_ethdev/rte_flow.h +3 -0
@@ -328,6 +328,34 @@ enum rte_flow_item_type {
 	 */
 	RTE_FLOW_ITEM_TYPE_GTPU,
 
+	/**
+	 * Matches a GTP PDU extension header (type is 0x85:
+	 * PDU Session Container).

Session Container => session container

lib/librte_ethdev/rte_flow.h enum rte_flow_item_type { · line 344

Quoted 11 lines
lib/librte_ethdev/rte_flow.h +11 -0
+	 *
+	 * Configure flow for GTP packets with extension header type 0x85.
+	 *
+	 * See struct rte_flow_item_gtp_psc.
+	 */
+	RTE_FLOW_ITEM_TYPE_GTP_PSC,
+
+	/**
+	 * Matches a PPPOE header.
+	 *
+	 * Configure flow for PPPoE Session packets.

Session => session

lib/librte_ethdev/rte_flow.h enum rte_flow_item_type { · line 353

Quoted 9 lines
lib/librte_ethdev/rte_flow.h +9 -0
+	 *
+	 * See struct rte_flow_item_pppoe.
+	 */
+	RTE_FLOW_ITEM_TYPE_PPPOES,
+
+	/**
+	 * Matches a PPPOE header.
+	 *
+	 * Configure flow for PPPoE Discovery stage packets.

Discovery => discovery

Quoted 11 lines
lib/librte_ethdev/rte_flow.h +5 -0
+	 *
+	 * See struct rte_flow_item_pppoe.
+	 */
+	RTE_FLOW_ITEM_TYPE_PPPOED,
+
 	/**
 	 * Matches a ESP header.
 	 *
@@ -922,6 +950,49 @@ static const struct rte_flow_item_gtp

rte_flow_item_gtp_mask = { }; #endif

Quoted 5 lines

+/**
+ * RTE_FLOW_ITEM_TYPE_GTP_PSC.
+ *
+ * Matches a GTP-extension header
+ * (type is 0x85: PDU Session Container).

Session Container => session container

(crusade against superfluous caps!)

[...]

lib/librte_ethdev/rte_flow.h static const struct rte_flow_item_gtp rte_flow_item_gtp_mask = { · line 981

Quoted 10 lines
lib/librte_ethdev/rte_flow.h +10 -0
+/**
+ * RTE_FLOW_ITEM_TYPE_PPPOE.
+ *
+ * Matches a PPPOE header.
+ */
+struct rte_flow_item_pppoe {
+	/**
+	 * Version (4b), type (4b).
+	 */
+	uint8_t v_t_flags;

v_t_flags => version_type

lib/librte_ethdev/rte_flow.h static const struct rte_flow_item_gtp rte_flow_item_gtp_mask = { · line 985

Quoted 4 lines
lib/librte_ethdev/rte_flow.h +4 -0
+	uint8_t code; /**< Message type. */
+	rte_be16_t session_id; /**< Session identifier. */
+	rte_be16_t length; /**< Payload length. */
+	rte_be16_t proto_id; /**< PPP Protocol identifier. */

As discussed, I suggest dropping proto_id to make this a generic match for PPPoE.

lib/librte_ethdev/rte_flow.h static const struct rte_flow_item_gtp rte_flow_item_gtp_mask = { · line 993

Quoted 7 lines
lib/librte_ethdev/rte_flow.h +7 -0
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_PPPOE. */ #ifndef __cplusplus
+static const struct rte_flow_item_pppoe rte_flow_item_pppoe_mask = {
+	.session_id = RTE_BE16(0xffff),
+	.proto_id = RTE_BE16(0xffff),
+};

I think the default for PPPoE should be an empty mask that simply says "match PPPoE" since session_id only becomes known after negotiation and proto_id shouldn't be part of this object.

--
Adrien Mazarguil
6WIND

#4 lore raw

v3 cover add GTP/PPPoE to flow API

In reply to Wang Ying A

patch 1/2: Add GTP extension header to flow API.
patch 2/2: Add PPPoE to flow API.

---
v3: Split original patch, one for GTP and the other for PPPoE.
Add RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID for PPPoE session packets.
v2: Remove Gerrit Change-Id's.
---

Wang Ying A (2):
ethdev: add GTP extension header to flow API
ethdev: add PPPoE to flow API

 app/test-pmd/cmdline_flow.c                 | 87 ++++++++++++++++++++++++++-
 doc/guides/prog_guide/rte_flow.rst          | 28 +++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 13 ++++
 lib/librte_ethdev/rte_flow.c                |  5 ++
 lib/librte_ethdev/rte_flow.h                | 93 +++++++++++++++++++++++++++++
 5 files changed, 225 insertions(+), 1 deletion(-)
Signature · 1 line
2.15.1
#5 lore raw

PATCH v3 1/2 ethdev: add GTP extension header to flow API

- RTE_FLOW_ITEM_TYPE_GTP_PSC: matches a GTP
PDU extension header (PDU session container).

---
 app/test-pmd/cmdline_flow.c                 | 36 +++++++++++++++++++++++++++++
 doc/guides/prog_guide/rte_flow.rst          |  9 ++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  5 ++++
 lib/librte_ethdev/rte_flow.c                |  1 +
 lib/librte_ethdev/rte_flow.h                | 27 ++++++++++++++++++++++
 5 files changed, 78 insertions(+)
app/test-pmd/cmdline_flow.c +36 -0
index 495871394..944a3e852 100644
@@ -196,6 +196,9 @@ enum index {
 	ITEM_META_DATA,
 	ITEM_GRE_KEY,
 	ITEM_GRE_KEY_VALUE,
+	ITEM_GTP_PSC,
+	ITEM_GTP_PSC_QFI,
+	ITEM_GTP_PSC_PDU_T,
 
 	/* Validate/create actions. */
 	ACTIONS,
@@ -663,6 +666,7 @@ static const enum index next_item[] = {
 	ITEM_ICMP6_ND_OPT_TLA_ETH,
 	ITEM_META,
 	ITEM_GRE_KEY,
+	ITEM_GTP_PSC,
 	END_SET,
 	ZERO,
 };
@@ -902,6 +906,13 @@ static const enum index item_meta[] = {
 	ZERO,
 };
 
+static const enum index item_gtp_psc[] = {
+	ITEM_GTP_PSC_QFI,
+	ITEM_GTP_PSC_PDU_T,
+	ITEM_NEXT,
+	ZERO,
+};
+
 static const enum index next_action[] = {
 	ACTION_END,
 	ACTION_VOID,
@@ -2331,6 +2342,28 @@ static const struct token token_list[] = {
 		.next = NEXT(item_gre_key, NEXT_ENTRY(UNSIGNED), item_param),
 		.args = ARGS(ARG_ENTRY_HTON(rte_be32_t)),
 	},
+	[ITEM_GTP_PSC] = {
+		.name = "gtp_psc",
+		.help = "match GTP extension header with type 0x85",
+		.priv = PRIV_ITEM(GTP_PSC,
+				sizeof(struct rte_flow_item_gtp_psc)),
+		.next = NEXT(item_gtp_psc),
+		.call = parse_vc,
+	},
+	[ITEM_GTP_PSC_QFI] = {
+		.name = "qfi",
+		.help = "QoS flow identifier",
+		.next = NEXT(item_gtp_psc, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gtp_psc,
+					qfi)),
+	},
+	[ITEM_GTP_PSC_PDU_T] = {
+		.name = "pdu_t",
+		.help = "PDU type",
+		.next = NEXT(item_gtp_psc, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gtp_psc,
+					pdu_type)),
+	},
 
 	/* Validate/create actions. */
 	[ACTIONS] = {
@@ -5756,6 +5789,9 @@ flow_item_default_mask(const struct rte_flow_item *item)
 	case RTE_FLOW_ITEM_TYPE_ESP:
 		mask = &rte_flow_item_esp_mask;
 		break;
+	case RTE_FLOW_ITEM_TYPE_GTP_PSC:
+		mask = &rte_flow_item_gtp_psc_mask;
+		break;
 	default:
 		break;
 	}
doc/guides/prog_guide/rte_flow.rst +9 -0
index 821b524b3..7521a1ec4 100644
@@ -1205,6 +1205,15 @@ Matches an application specific 32 bit metadata item.
 
 - Default ``mask`` matches the specified metadata value.
 
+Item: ``GTP_PSC``
+^^^^^^^^^^^^^^^^^
+
+Matches a GTP PDU extension header with type 0x85.
+
+- ``pdu_type``: PDU type.
+- ``qfi``: QoS flow identifier.
+- Default ``mask`` matches QFI only.
+
 .. _table_rte_flow_item_meta:
 
 .. table:: META
doc/guides/testpmd_app_ug/testpmd_funcs.rst +5 -0
index 313e0707e..4f71ae234 100644
@@ -3955,6 +3955,11 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``data {unsigned}``: metadata value.
 
+- ``gtp_psc``: match GTP PDU extension header with type 0x85.
+
+  - ``pdu_type {unsigned}``: PDU type.
+  - ``qfi {unsigned}``: QoS flow identifier.
+
 Actions list
 ^^^^^^^^^^^^
 
lib/librte_ethdev/rte_flow.c +1 -0
index 18fcb018e..fb25219d1 100644
@@ -75,6 +75,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(MARK, sizeof(struct rte_flow_item_mark)),
 	MK_FLOW_ITEM(META, sizeof(struct rte_flow_item_meta)),
 	MK_FLOW_ITEM(GRE_KEY, sizeof(rte_be32_t)),
+	MK_FLOW_ITEM(GTP_PSC, sizeof(struct rte_flow_item_gtp_psc)),
 };
 
 /** Generate flow_action[] entry. */
lib/librte_ethdev/rte_flow.h +27 -0
index b66bf1495..8bb37aafb 100644
@@ -434,6 +434,15 @@ enum rte_flow_item_type {
 	 * @code rte_be32_t * @endcode
 	 */
 	RTE_FLOW_ITEM_TYPE_GRE_KEY,
+
+	/**
+	 * Matches a GTP extension header: PDU session container.
+	 *
+	 * Configure flow for GTP packets with extension header type 0x85.
+	 *
+	 * See struct rte_flow_item_gtp_psc.
+	 */
+	RTE_FLOW_ITEM_TYPE_GTP_PSC,
 };
 
 /**
@@ -1192,6 +1201,24 @@ static const struct rte_flow_item_meta rte_flow_item_meta_mask = {
 };
 #endif
 
+/**
+ * RTE_FLOW_ITEM_TYPE_GTP_PSC.
+ *
+ * Matches a GTP PDU extension header with type 0x85.
+ */
+struct rte_flow_item_gtp_psc {
+	uint8_t pdu_type; /**< PDU type. */
+	uint8_t qfi; /**< QoS flow identifier. */
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_GTP_PSC. */
+#ifndef __cplusplus
+static const struct rte_flow_item_gtp_psc
+rte_flow_item_gtp_psc_mask = {
+	.qfi = 0x3f,
+};
+#endif
+
 /**
  * @warning
  * @b EXPERIMENTAL: this structure may change without prior notice
Signature · 1 line
2.15.1
#6 lore raw

v4 cover add GTP/PPPoE to flow API

patch 1/2: Add GTP extension header to flow API.
patch 2/2: Add PPPoE to flow API.

---
v4: Fix PPPoE testpmd cmdline issue.
v3: Split original patch, one for GTP and the other for PPPoE.
Add RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID for PPPoE session packets.
v2: Remove Gerrit Change-Id's.
---

Wang Ying A (2):
ethdev: add GTP extension header to flow API
ethdev: add PPPoE to flow API

 app/test-pmd/cmdline_flow.c                 | 93 ++++++++++++++++++++++++++++-
 doc/guides/prog_guide/rte_flow.rst          | 28 +++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 13 ++++
 lib/librte_ethdev/rte_flow.c                |  5 ++
 lib/librte_ethdev/rte_flow.h                | 93 +++++++++++++++++++++++++++++
 5 files changed, 231 insertions(+), 1 deletion(-)
Signature · 1 line
2.15.1
#7 lore raw

PATCH v4 1/2 ethdev: add GTP extension header to flow API

- RTE_FLOW_ITEM_TYPE_GTP_PSC: matches a GTP
PDU extension header (PDU session container).

---
 app/test-pmd/cmdline_flow.c                 | 36 +++++++++++++++++++++++++++++
 doc/guides/prog_guide/rte_flow.rst          |  9 ++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  5 ++++
 lib/librte_ethdev/rte_flow.c                |  1 +
 lib/librte_ethdev/rte_flow.h                | 27 ++++++++++++++++++++++
 5 files changed, 78 insertions(+)
app/test-pmd/cmdline_flow.c +36 -0
index 495871394..944a3e852 100644
@@ -196,6 +196,9 @@ enum index {
 	ITEM_META_DATA,
 	ITEM_GRE_KEY,
 	ITEM_GRE_KEY_VALUE,
+	ITEM_GTP_PSC,
+	ITEM_GTP_PSC_QFI,
+	ITEM_GTP_PSC_PDU_T,
 
 	/* Validate/create actions. */
 	ACTIONS,
@@ -663,6 +666,7 @@ static const enum index next_item[] = {
 	ITEM_ICMP6_ND_OPT_TLA_ETH,
 	ITEM_META,
 	ITEM_GRE_KEY,
+	ITEM_GTP_PSC,
 	END_SET,
 	ZERO,
 };
@@ -902,6 +906,13 @@ static const enum index item_meta[] = {
 	ZERO,
 };
 
+static const enum index item_gtp_psc[] = {
+	ITEM_GTP_PSC_QFI,
+	ITEM_GTP_PSC_PDU_T,
+	ITEM_NEXT,
+	ZERO,
+};
+
 static const enum index next_action[] = {
 	ACTION_END,
 	ACTION_VOID,
@@ -2331,6 +2342,28 @@ static const struct token token_list[] = {
 		.next = NEXT(item_gre_key, NEXT_ENTRY(UNSIGNED), item_param),
 		.args = ARGS(ARG_ENTRY_HTON(rte_be32_t)),
 	},
+	[ITEM_GTP_PSC] = {
+		.name = "gtp_psc",
+		.help = "match GTP extension header with type 0x85",
+		.priv = PRIV_ITEM(GTP_PSC,
+				sizeof(struct rte_flow_item_gtp_psc)),
+		.next = NEXT(item_gtp_psc),
+		.call = parse_vc,
+	},
+	[ITEM_GTP_PSC_QFI] = {
+		.name = "qfi",
+		.help = "QoS flow identifier",
+		.next = NEXT(item_gtp_psc, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gtp_psc,
+					qfi)),
+	},
+	[ITEM_GTP_PSC_PDU_T] = {
+		.name = "pdu_t",
+		.help = "PDU type",
+		.next = NEXT(item_gtp_psc, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gtp_psc,
+					pdu_type)),
+	},
 
 	/* Validate/create actions. */
 	[ACTIONS] = {
@@ -5756,6 +5789,9 @@ flow_item_default_mask(const struct rte_flow_item *item)
 	case RTE_FLOW_ITEM_TYPE_ESP:
 		mask = &rte_flow_item_esp_mask;
 		break;
+	case RTE_FLOW_ITEM_TYPE_GTP_PSC:
+		mask = &rte_flow_item_gtp_psc_mask;
+		break;
 	default:
 		break;
 	}
doc/guides/prog_guide/rte_flow.rst +9 -0
index 821b524b3..7521a1ec4 100644
@@ -1205,6 +1205,15 @@ Matches an application specific 32 bit metadata item.
 
 - Default ``mask`` matches the specified metadata value.
 
+Item: ``GTP_PSC``
+^^^^^^^^^^^^^^^^^
+
+Matches a GTP PDU extension header with type 0x85.
+
+- ``pdu_type``: PDU type.
+- ``qfi``: QoS flow identifier.
+- Default ``mask`` matches QFI only.
+
 .. _table_rte_flow_item_meta:
 
 .. table:: META
doc/guides/testpmd_app_ug/testpmd_funcs.rst +5 -0
index 313e0707e..4f71ae234 100644
@@ -3955,6 +3955,11 @@ This section lists supported pattern items and their attributes, if any.
 
   - ``data {unsigned}``: metadata value.
 
+- ``gtp_psc``: match GTP PDU extension header with type 0x85.
+
+  - ``pdu_type {unsigned}``: PDU type.
+  - ``qfi {unsigned}``: QoS flow identifier.
+
 Actions list
 ^^^^^^^^^^^^
 
lib/librte_ethdev/rte_flow.c +1 -0
index 18fcb018e..fb25219d1 100644
@@ -75,6 +75,7 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(MARK, sizeof(struct rte_flow_item_mark)),
 	MK_FLOW_ITEM(META, sizeof(struct rte_flow_item_meta)),
 	MK_FLOW_ITEM(GRE_KEY, sizeof(rte_be32_t)),
+	MK_FLOW_ITEM(GTP_PSC, sizeof(struct rte_flow_item_gtp_psc)),
 };
 
 /** Generate flow_action[] entry. */
lib/librte_ethdev/rte_flow.h +27 -0
index b66bf1495..8bb37aafb 100644
@@ -434,6 +434,15 @@ enum rte_flow_item_type {
 	 * @code rte_be32_t * @endcode
 	 */
 	RTE_FLOW_ITEM_TYPE_GRE_KEY,
+
+	/**
+	 * Matches a GTP extension header: PDU session container.
+	 *
+	 * Configure flow for GTP packets with extension header type 0x85.
+	 *
+	 * See struct rte_flow_item_gtp_psc.
+	 */
+	RTE_FLOW_ITEM_TYPE_GTP_PSC,
 };
 
 /**
@@ -1192,6 +1201,24 @@ static const struct rte_flow_item_meta rte_flow_item_meta_mask = {
 };
 #endif
 
+/**
+ * RTE_FLOW_ITEM_TYPE_GTP_PSC.
+ *
+ * Matches a GTP PDU extension header with type 0x85.
+ */
+struct rte_flow_item_gtp_psc {
+	uint8_t pdu_type; /**< PDU type. */
+	uint8_t qfi; /**< QoS flow identifier. */
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_GTP_PSC. */
+#ifndef __cplusplus
+static const struct rte_flow_item_gtp_psc
+rte_flow_item_gtp_psc_mask = {
+	.qfi = 0x3f,
+};
+#endif
+
 /**
  * @warning
  * @b EXPERIMENTAL: this structure may change without prior notice
Signature · 1 line
2.15.1
Acked-by on v4 1/2
#8 lore raw

Re: [dpdk-dev] [PATCH v4 1/2] ethdev: add GTP extension header to flow API

Quoted 11 lines

-----Original Message-----
From: dev <[email protected]> On Behalf Of Wang Ying A
Sent: Wednesday, August 28, 2019 9:01 AM
To: [email protected]; [email protected]
Cc: [email protected]; Adrien Mazarguil <[email protected]>; [email protected]; [email protected]; [email protected]
Subject: [dpdk-dev] [PATCH v4 1/2] ethdev: add GTP extension header to flow API

Quoted 5 lines

- RTE_FLOW_ITEM_TYPE_GTP_PSC: matches a GTP
PDU extension header (PDU session container).

---

Thanks,
Ori Kam

#9 lore raw

PATCH v4 2/2 ethdev: add PPPoE to flow API

In reply to Wang Ying A

- RTE_FLOW_ITEM_TYPE_PPPOES: matches a PPPoE session header.

- RTE_FLOW_ITEM_TYPE_PPPOED: matches a PPPoE discovery header.

- RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID: matches a PPPoE session protocol identifier.

---
 app/test-pmd/cmdline_flow.c                 | 57 ++++++++++++++++++++++++-
 doc/guides/prog_guide/rte_flow.rst          | 19 +++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  8 ++++
 lib/librte_ethdev/rte_flow.c                |  4 ++
 lib/librte_ethdev/rte_flow.h                | 66 +++++++++++++++++++++++++++++
 5 files changed, 153 insertions(+), 1 deletion(-)
app/test-pmd/cmdline_flow.c +56 -1
index 944a3e852..b91776299 100644
@@ -199,6 +199,10 @@ enum index {
 	ITEM_GTP_PSC,
 	ITEM_GTP_PSC_QFI,
 	ITEM_GTP_PSC_PDU_T,
+	ITEM_PPPOES,
+	ITEM_PPPOED,
+	ITEM_PPPOE_SEID,
+	ITEM_PPPOE_PROTO_ID,
 
 	/* Validate/create actions. */
 	ACTIONS,
@@ -667,6 +671,9 @@ static const enum index next_item[] = {
 	ITEM_META,
 	ITEM_GRE_KEY,
 	ITEM_GTP_PSC,
+	ITEM_PPPOES,
+	ITEM_PPPOED,
+	ITEM_PPPOE_PROTO_ID,
 	END_SET,
 	ZERO,
 };
@@ -913,6 +920,24 @@ static const enum index item_gtp_psc[] = {
 	ZERO,
 };
 
+static const enum index item_pppoed[] = {
+	ITEM_PPPOE_SEID,
+	ITEM_NEXT,
+	ZERO,
+};
+
+static const enum index item_pppoes[] = {
+	ITEM_PPPOE_SEID,
+	ITEM_NEXT,
+	ZERO,
+};
+
+static const enum index item_pppoe_proto_id[] = {
+	ITEM_PPPOE_PROTO_ID,
+	ITEM_NEXT,
+	ZERO,
+};
+
 static const enum index next_action[] = {
 	ACTION_END,
 	ACTION_VOID,
@@ -2364,7 +2389,35 @@ static const struct token token_list[] = {
 		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gtp_psc,
 					pdu_type)),
 	},
-
+	[ITEM_PPPOES] = {
+		.name = "pppoes",
+		.help = "match PPPoE session header",
+		.priv = PRIV_ITEM(PPPOES, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoes),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOED] = {
+		.name = "pppoed",
+		.help = "match PPPoE discovery header",
+		.priv = PRIV_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoed),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOE_SEID] = {
+		.name = "seid",
+		.help = "session identifier",
+		.next = NEXT(item_pppoes, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_pppoe,
+					session_id)),
+	},
+	[ITEM_PPPOE_PROTO_ID] = {
+		.name = "proto_id",
+		.help = "match PPPoE session protocol identifier",
+		.priv = PRIV_ITEM(PPPOE_PROTO_ID,
+				sizeof(struct rte_flow_item_pppoe_proto_id)),
+		.next = NEXT(item_pppoe_proto_id),
+		.call = parse_vc,
+	},
 	/* Validate/create actions. */
 	[ACTIONS] = {
 		.name = "actions",
@@ -5792,6 +5845,8 @@ flow_item_default_mask(const struct rte_flow_item *item)
 	case RTE_FLOW_ITEM_TYPE_GTP_PSC:
 		mask = &rte_flow_item_gtp_psc_mask;
 		break;
+	case RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID:
+		mask = &rte_flow_item_pppoe_proto_id_mask;
 	default:
 		break;
 	}
doc/guides/prog_guide/rte_flow.rst +19 -0
index 7521a1ec4..ff6fb1186 100644
@@ -1214,6 +1214,25 @@ Matches a GTP PDU extension header with type 0x85.
 - ``qfi``: QoS flow identifier.
 - Default ``mask`` matches QFI only.
 
+Item: ``PPPOES``, ``PPPOED``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches a PPPoE header.
+
+- ``version_type``: version (4b), type (4b).
+- ``code``: message type.
+- ``session_id``: session identifier.
+- ``length``: payload length.
+
+Item: ``PPPOE_PROTO_ID``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches a PPPoE session protocol identifier.
+
+- ``proto_id``: PPP protocol identifier.
+- Default ``mask`` matches proto_id only.
+
+
 .. _table_rte_flow_item_meta:
 
 .. table:: META
doc/guides/testpmd_app_ug/testpmd_funcs.rst +8 -0
index 4f71ae234..bc2ebe7b1 100644
@@ -3960,6 +3960,14 @@ This section lists supported pattern items and their attributes, if any.
   - ``pdu_type {unsigned}``: PDU type.
   - ``qfi {unsigned}``: QoS flow identifier.
 
+- ``pppoes``, ``pppoed``: match PPPoE header.
+
+  - ``session_id {unsigned}``: session identifier.
+
+- ``pppoe_proto_id``: match PPPoE session protocol identifier.
+
+  - ``proto_id {unsigned}``: PPP protocol identifier.
+
 Actions list
 ^^^^^^^^^^^^
 
lib/librte_ethdev/rte_flow.c +4 -0
index fb25219d1..cc03b159f 100644
@@ -76,6 +76,10 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(META, sizeof(struct rte_flow_item_meta)),
 	MK_FLOW_ITEM(GRE_KEY, sizeof(rte_be32_t)),
 	MK_FLOW_ITEM(GTP_PSC, sizeof(struct rte_flow_item_gtp_psc)),
+	MK_FLOW_ITEM(PPPOES, sizeof(struct rte_flow_item_pppoe)),
+	MK_FLOW_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
+	MK_FLOW_ITEM(PPPOE_PROTO_ID,
+			sizeof(struct rte_flow_item_pppoe_proto_id)),
 };
 
 /** Generate flow_action[] entry. */
lib/librte_ethdev/rte_flow.h +66 -0

78 lines not on this page · raw message

Signature · 1 line
2.15.1
Acked-by on v4 2/2
#10 lore raw

Re: [dpdk-dev] [PATCH v4 2/2] ethdev: add PPPoE to flow API

Quoted 12 lines

-----Original Message-----
From: dev <[email protected]> On Behalf Of Wang Ying A
Sent: Wednesday, August 28, 2019 9:01 AM
To: [email protected]; [email protected]
Cc: [email protected]; Adrien Mazarguil <[email protected]>; [email protected]; [email protected]; [email protected]
Subject: [dpdk-dev] [PATCH v4 2/2] ethdev: add PPPoE to flow API

- RTE_FLOW_ITEM_TYPE_PPPOES: matches a PPPoE session header.

Quoted 7 lines

- RTE_FLOW_ITEM_TYPE_PPPOED: matches a PPPoE discovery header.

- RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID: matches a PPPoE session protocol identifier.

---

Thanks,
Ori Kam

Reviewed-by on the v4 series
#11 lore raw

Re: [dpdk-dev] [PATCH v4 0/2] add GTP/PPPoE to flow API

In reply to Wang Ying A
Quoted 35 lines

-----Original Message-----
From: Wang, Ying A
Sent: Wednesday, August 28, 2019 2:01 PM
To: Zhang, Qi Z <[email protected]>; Yigit, Ferruh <[email protected]>
Cc: [email protected]; [email protected]; Ye, Xiaolong <[email protected]>; Yang, Qiming <[email protected]>; Wang, Ying A <[email protected]>
Subject: [PATCH v4 0/2] add GTP/PPPoE to flow API

patch 1/2: Add GTP extension header to flow API.
patch 2/2: Add PPPoE to flow API.

---
v4: Fix PPPoE testpmd cmdline issue.
v3: Split original patch, one for GTP and the other for PPPoE.
Add RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID for PPPoE session
packets.
v2: Remove Gerrit Change-Id's.
---

Wang Ying A (2):
ethdev: add GTP extension header to flow API
ethdev: add PPPoE to flow API

 app/test-pmd/cmdline_flow.c                 | 93
++++++++++++++++++++++++++++-
 doc/guides/prog_guide/rte_flow.rst          | 28 +++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 13 ++++
 lib/librte_ethdev/rte_flow.c                |  5 ++
 lib/librte_ethdev/rte_flow.h                | 93
+++++++++++++++++++++++++++++
 5 files changed, 231 insertions(+), 1 deletion(-)
Quoted 2 lines

--
2.15.1

Reviewed-by
#12 lore raw

Re: [dpdk-dev] [PATCH v4 0/2] add GTP/PPPoE to flow API

Quoted 35 lines · Qi Z
Quoted 35 lines

-----Original Message-----
From: Wang, Ying A
Sent: Wednesday, August 28, 2019 2:01 PM
To: Zhang, Qi Z <[email protected]>; Yigit, Ferruh <[email protected]>
Cc: [email protected]; [email protected]; Ye, Xiaolong <[email protected]>; Yang, Qiming <[email protected]>; Wang, Ying A <[email protected]>
Subject: [PATCH v4 0/2] add GTP/PPPoE to flow API

patch 1/2: Add GTP extension header to flow API.
patch 2/2: Add PPPoE to flow API.

---
v4: Fix PPPoE testpmd cmdline issue.
v3: Split original patch, one for GTP and the other for PPPoE.
Add RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID for PPPoE session
packets.
v2: Remove Gerrit Change-Id's.
---

Wang Ying A (2):
ethdev: add GTP extension header to flow API
ethdev: add PPPoE to flow API

 app/test-pmd/cmdline_flow.c                 | 93
++++++++++++++++++++++++++++-
 doc/guides/prog_guide/rte_flow.rst          | 28 +++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 13 ++++
 lib/librte_ethdev/rte_flow.c                |  5 ++
 lib/librte_ethdev/rte_flow.h                | 93
+++++++++++++++++++++++++++++
 5 files changed, 231 insertions(+), 1 deletion(-)
Quoted 5 lines
Quoted 2 lines

--
2.15.1

For series,

Series applied to dpdk-next-net/master, thanks.

#13 lore raw

PATCH v3 2/2 ethdev: add PPPoE to flow API

In reply to Wang Ying A

- RTE_FLOW_ITEM_TYPE_PPPOES: matches a PPPoE session header.

- RTE_FLOW_ITEM_TYPE_PPPOED: matches a PPPoE discovery header.

- RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID: matches a PPPoE session protocol identifier.

---
 app/test-pmd/cmdline_flow.c                 | 51 +++++++++++++++++++++-
 doc/guides/prog_guide/rte_flow.rst          | 19 +++++++++
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  8 ++++
 lib/librte_ethdev/rte_flow.c                |  4 ++
 lib/librte_ethdev/rte_flow.h                | 66 +++++++++++++++++++++++++++++
 5 files changed, 147 insertions(+), 1 deletion(-)
app/test-pmd/cmdline_flow.c +50 -1
index 944a3e852..a19fb65f2 100644
@@ -199,6 +199,10 @@ enum index {
 	ITEM_GTP_PSC,
 	ITEM_GTP_PSC_QFI,
 	ITEM_GTP_PSC_PDU_T,
+	ITEM_PPPOES,
+	ITEM_PPPOED,
+	ITEM_PPPOE_SEID,
+	ITEM_PPPOE_PROTO_ID,
 
 	/* Validate/create actions. */
 	ACTIONS,
@@ -667,6 +671,9 @@ static const enum index next_item[] = {
 	ITEM_META,
 	ITEM_GRE_KEY,
 	ITEM_GTP_PSC,
+	ITEM_PPPOES,
+	ITEM_PPPOED,
+	ITEM_PPPOE_PROTO_ID,
 	END_SET,
 	ZERO,
 };
@@ -913,6 +920,18 @@ static const enum index item_gtp_psc[] = {
 	ZERO,
 };
 
+static const enum index item_pppoe[] = {
+	ITEM_PPPOE_SEID,
+	ITEM_NEXT,
+	ZERO,
+};
+
+static const enum index item_pppoe_proto_id[] = {
+	ITEM_PPPOE_PROTO_ID,
+	ITEM_NEXT,
+	ZERO,
+};
+
 static const enum index next_action[] = {
 	ACTION_END,
 	ACTION_VOID,
@@ -2364,7 +2383,35 @@ static const struct token token_list[] = {
 		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_gtp_psc,
 					pdu_type)),
 	},
-
+	[ITEM_PPPOES] = {
+		.name = "pppoe",
+		.help = "match PPPoE session header",
+		.priv = PRIV_ITEM(PPPOES, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoe),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOED] = {
+		.name = "pppoe",
+		.help = "match PPPoE discovery header",
+		.priv = PRIV_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
+		.next = NEXT(item_pppoe),
+		.call = parse_vc,
+	},
+	[ITEM_PPPOE_SEID] = {
+		.name = "seid",
+		.help = "session identifier",
+		.next = NEXT(item_pppoe, NEXT_ENTRY(UNSIGNED), item_param),
+		.args = ARGS(ARGS_ENTRY_HTON(struct rte_flow_item_pppoe,
+					session_id)),
+	},
+	[ITEM_PPPOE_PROTO_ID] = {
+		.name = "proto_id",
+		.help = "match PPPoE session protocol identifier",
+		.priv = PRIV_ITEM(PPPOE_PROTO_ID,
+				sizeof(struct rte_flow_item_pppoe_proto_id)),
+		.next = NEXT(item_pppoe_proto_id),
+		.call = parse_vc,
+	},
 	/* Validate/create actions. */
 	[ACTIONS] = {
 		.name = "actions",
@@ -5792,6 +5839,8 @@ flow_item_default_mask(const struct rte_flow_item *item)
 	case RTE_FLOW_ITEM_TYPE_GTP_PSC:
 		mask = &rte_flow_item_gtp_psc_mask;
 		break;
+	case RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID:
+		mask = &rte_flow_item_pppoe_proto_id_mask;
 	default:
 		break;
 	}
doc/guides/prog_guide/rte_flow.rst +19 -0
index 7521a1ec4..ff6fb1186 100644
@@ -1214,6 +1214,25 @@ Matches a GTP PDU extension header with type 0x85.
 - ``qfi``: QoS flow identifier.
 - Default ``mask`` matches QFI only.
 
+Item: ``PPPOES``, ``PPPOED``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches a PPPoE header.
+
+- ``version_type``: version (4b), type (4b).
+- ``code``: message type.
+- ``session_id``: session identifier.
+- ``length``: payload length.
+
+Item: ``PPPOE_PROTO_ID``
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Matches a PPPoE session protocol identifier.
+
+- ``proto_id``: PPP protocol identifier.
+- Default ``mask`` matches proto_id only.
+
+
 .. _table_rte_flow_item_meta:
 
 .. table:: META
doc/guides/testpmd_app_ug/testpmd_funcs.rst +8 -0
index 4f71ae234..bc2ebe7b1 100644
@@ -3960,6 +3960,14 @@ This section lists supported pattern items and their attributes, if any.
   - ``pdu_type {unsigned}``: PDU type.
   - ``qfi {unsigned}``: QoS flow identifier.
 
+- ``pppoes``, ``pppoed``: match PPPoE header.
+
+  - ``session_id {unsigned}``: session identifier.
+
+- ``pppoe_proto_id``: match PPPoE session protocol identifier.
+
+  - ``proto_id {unsigned}``: PPP protocol identifier.
+
 Actions list
 ^^^^^^^^^^^^
 
lib/librte_ethdev/rte_flow.c +4 -0
index fb25219d1..cc03b159f 100644
@@ -76,6 +76,10 @@ static const struct rte_flow_desc_data rte_flow_desc_item[] = {
 	MK_FLOW_ITEM(META, sizeof(struct rte_flow_item_meta)),
 	MK_FLOW_ITEM(GRE_KEY, sizeof(rte_be32_t)),
 	MK_FLOW_ITEM(GTP_PSC, sizeof(struct rte_flow_item_gtp_psc)),
+	MK_FLOW_ITEM(PPPOES, sizeof(struct rte_flow_item_pppoe)),
+	MK_FLOW_ITEM(PPPOED, sizeof(struct rte_flow_item_pppoe)),
+	MK_FLOW_ITEM(PPPOE_PROTO_ID,
+			sizeof(struct rte_flow_item_pppoe_proto_id)),
 };
 
 /** Generate flow_action[] entry. */
lib/librte_ethdev/rte_flow.h +66 -0

78 lines not on this page · raw message

Signature · 1 line
2.15.1