New: hpsa hang when creating ext4 FS
https://bugzilla.kernel.org/show_bug.cgi?id=101201
Bug ID: 101201
Summary: hpsa hang when creating ext4 FS
Product: SCSI Drivers
Version: 2.5
Kernel Version: 3.16.7-ckt11-1
Hardware: x86-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: Other
Assignee: [email protected]
Reporter: [email protected]
Regression: NoHardware:
HP ProLiant DL385p Gen8 with 2 SSD 100G and 2 HD SATA 3TB, configured in HBA mode, no HW RAID set up.
I boot on the Debian 8 installer, then
- load hpsa
- create one partition on each of the SSD
- create a soft RAID 1 using mdadm on those 2 partition
- raid synchronize successfully
- create a pv, then a vg on this raid without problem
- doing mkswap on a LV without problem
- doing mkfs.ext4 on a LV -> the process HANG
dmesg gives:
[ 1490.566398] hpsa 0000:03:00.0: Abort request on C6:B2:T0:L0 [ 1490.566819] hpsa 0000:03:00.0: ABORT REQUEST on C6:B2:T0:L0 Tag:0x00000000:00000030 Command:0x42 SN:0x1687d9 REQUEST SUCCEEDED. [ 1540.309302] hpsa 0000:03:00.0: ABORT REQUEST on C6:B2:T0:L0 Tag:0x00000000:00000030 Command:0x42 SN:0x1687d9 FAILED. Aborted command has not completed after 30 seconds. [ 1540.309319] hpsa 0000:03:00.0: Abort request on C6:B2:T1:L0 [ 1540.345047] hpsa 0000:03:00.0: ABORT REQUEST on C6:B2:T1:L0 Tag:0x00000000:00000010 Command:0x42 SN:0x1687d8 REQUEST SUCCEEDED. [ 1588.796036] hpsa 0000:03:00.0: ABORT REQUEST on C6:B2:T1:L0 Tag:0x00000000:00000010 Command:0x42 SN:0x1687d8 FAILED. Aborted command has not completed after 30 seconds. [ 1588.796090] hpsa 0000:03:00.0: resetting device 6:2:0:0
the mkfs process doesn't finish and I can no longer access disks (parted, etc..)
I can repeat this on two identical servers.
I looked at kernel changelogs and did not see anything that may fix this on recent releases.
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.