Skip to contentSkip to conversation

Link status is not correclty updated for E810 NIC (ice driver) on Windows

Bug 1170 [email protected] 1 participant 1 message Feb 28, 2023

lore
Share & tools
lore
#0 lore raw

https://bugs.dpdk.org/show_bug.cgi?id=1170

Bug ID: 1170
Summary: Link status is not correclty updated for E810 NIC (ice
driver) on Windows
Product: DPDK
Version: 22.11
Hardware: All
OS: Windows
Status: UNCONFIRMED
Severity: normal
Priority: Normal
Component: ethdev
Assignee: [email protected]
Reporter: [email protected]
Target Milestone: ---

Hello,

I have an issue regarding the link status when using a Intel E810 NIC with DPDK.

I have a simple sample which simply loops, call rte_eth_link_get and prints the result.

When using a E810 NIC, I have the following behaviour :
- At the start of the test, the cable is plugged in;
- I launch the sample, the link is reported as up (as expected)
- I unplug the cable
- The link is still reported as up in the sample (not expected).
- I stop the sample and relaunch it
- The link is reported as down by the sample (as expected)
- I replug the cable
- The link is still reported as down by the sample (not expected).

I looks like, once DPDK is started, the link status of the device is not correctly updated.

When trying this with an XXV710 (i40e driver), i have no issue.

According to the Overview of Networking Drivers(
https://doc.dpdk.org/guides-21.02/nics/overview.html ), the ice driver is compatible with "Link Status" and "Link Status Event" functionalities.

-------------------------------------------------------------
Setup:
- DPDK v22.11.1
- DDP : ice-1.3.30.0.pkg.

Signature · 2 lines
You are receiving this mail because:
You are the assignee for the bug.