New: Gen image :Iappropriate ioctl error
https://bugs.busybox.net/show_bug.cgi?id=13601
Bug ID: 13601
Summary: Gen image :Iappropriate ioctl error
Product: buildroot
Version: 2021.02
Hardware: All
OS: Linux
Status: NEW
Severity: normal
Priority: P5
Component: Other
Assignee: unassigned at buildroot.uclibc.org
Reporter: neerajkrishnat at gmail.com
CC: buildroot at uclibc.org
Target Milestone: ---
Raspberrypi 4 gen image fails just after selecting make <board_defconfig>
make menuconfig
make some adjustments to libraries and packages
and just make -j4:
This is the error i get not just for raspberry pi but for any board with genimage option
ln -sf rootfs.ext2 /home/nirajtummala/buildroot/output/images/rootfs.ext4
Quoted 1 line
Quoted 1 line
Quoted 1 line
Executing post-image script
board/raspberrypi4/post-image.sh
board/raspberrypi4/genimage-raspberrypi4.cfg:30: no sub-section title/index for 'config'
INFO: cmd: "mkdir -p "/home/nirajtummala/buildroot/output/build/genimage.tmp"" (stderr):
INFO: cmd: "rm -rf "/home/nirajtummala/buildroot/output/build/genimage.tmp"/*" (stderr):
INFO: cmd: "mkdir -p "/home/nirajtummala/buildroot/output/build/genimage.tmp"" (stderr):
INFO: cmd: "cp -a "/tmp/tmp.3rJcfQQAN8" "/home/nirajtummala/buildroot/output/build/genimage.tmp/root"" (stderr):
INFO: cmd: "find '/home/nirajtummala/buildroot/output/build/genimage.tmp/root' -depth -type d -printf '%P\0' | xargs -0 -I {} touch -r '/tmp/tmp.3rJcfQQAN8/{}' '/home/nirajtummala/buildroot/output/build/genimage.tmp/root/{}'" (stderr):
INFO: cmd: "mkdir -p "/home/nirajtummala/buildroot/output/images"" (stderr):
INFO: vfat(boot.vfat): cmd: "dd if=/dev/zero of="/home/nirajtummala/buildroot/output/images/boot.vfat" seek=67108864 count=0 bs=1 2>/dev/null" (stderr):
INFO: vfat(boot.vfat): cmd: "mkdosfs '/home/nirajtummala/buildroot/output/images/boot.vfat'" (stderr):
INFO: vfat(boot.vfat): adding file 'zImage' as 'zImage' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i '/home/nirajtummala/buildroot/output/images/boot.vfat' '/home/nirajtummala/buildroot/output/images/zImage' '::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2711-rpi-4-b.dtb' as 'bcm2711-rpi-4-b.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i '/home/nirajtummala/buildroot/output/images/boot.vfat' '/home/nirajtummala/buildroot/output/images/bcm2711-rpi-4-b.dtb' '::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/cmdline.txt' as 'rpi-firmware/cmdline.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i '/home/nirajtummala/buildroot/output/images/boot.vfat' '/home/nirajtummala/buildroot/output/images/rpi-firmware/cmdline.txt' '::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/config.txt' as 'rpi-firmware/config.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i '/home/nirajtummala/buildroot/output/images/boot.vfat' '/home/nirajtummala/buildroot/output/images/rpi-firmware/config.txt' '::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/fixup.dat' as 'rpi-firmware/fixup.dat' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i '/home/nirajtummala/buildroot/output/images/boot.vfat' '/home/nirajtummala/buildroot/output/images/rpi-firmware/fixup.dat' '::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/start.elf' as 'rpi-firmware/start.elf' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i '/home/nirajtummala/buildroot/output/images/boot.vfat' '/home/nirajtummala/buildroot/output/images/rpi-firmware/start.elf' '::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/overlays' as 'rpi-firmware/overlays' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i '/home/nirajtummala/buildroot/output/images/boot.vfat' '/home/nirajtummala/buildroot/output/images/rpi-firmware/overlays' '::'" (stderr):
INFO: hdimage(sdcard.img): adding partition 'boot' (in MBR) from 'boot.vfat'
...
ERROR: hdimage(sdcard.img): fiemap /home/nirajtummala/buildroot/output/images/boot.vfat: 25 Inappropriate ioctl for device
ERROR: hdimage(sdcard.img): failed to write image partition 'boot'
INFO: hdimage(sdcard.img): cmd: "rm -f "/home/nirajtummala/buildroot/output/images/sdcard.img"" (stderr):
ERROR: hdimage(sdcard.img): failed to generate sdcard.img
make: *** [Makefile:835: target-post-image] Error 1
root at NirajTummala:/home/nirajtummala/buildroot#
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 13601] Gen image :Iappropriate ioctl error
https://bugs.busybox.net/show_bug.cgi?id=13601
--- Comment #1 from NirajTummala <[email protected]> --- The Above build environment is WSL2 ubuntu 20.04
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 13601] Gen image :Iappropriate ioctl error
In reply to bugzilla at busybox.nethttps://bugs.busybox.net/show_bug.cgi?id=13601
--- Comment #2 from Peter Seiderer <[email protected]> ---
WSL2 could be the decisive information, similar/same failure was already reported, see [1], the fix/workaround is accepted/committed upstream, see [2], and should be in buildroot after latest genimage version bump (see [3]), not yet in 2021.02, only on git master...
[1] https://bugs.busybox.net/show_bug.cgi?id=13146
[2]
https://git.pengutronix.de/cgit/genimage/commit/?id=4c2b02df0861e06ca9320d80ad60994d4a239ad6
[3]
https://git.buildroot.net/buildroot/commit/?id=50cfedc86d205f2ac7145deadb1c94474374acff
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 13601] Gen image :Iappropriate ioctl error
In reply to bugzilla at busybox.nethttps://bugs.busybox.net/show_bug.cgi?id=13601
Yann E. MORIN <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |yann.morin.1998 at free.fr
--- Comment #3 from Yann E. MORIN <[email protected]> --- (In reply to Peter Seiderer from comment #2)
Quoted 1 line
similar/same failure was already reported, see #13146
But 13146 was about WSL1, no? That error is not supposed to hapen under WSL2, as I understand it...
NirajTummala, are you sure you are using WSL2? Care to double-check, please?
Quoted 1 line
latest genimage version bump (see [3]), not yet in 2021.02, only on git master...
Could you please send a patch for 2021.02 with just a backport of that fix, please?
(yes, I know I was not in favour of it back then, but since upstream did apply it, then we can backport it now).
Thanks!
Regards,
Yann E. MORIN.
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 13601] Gen image :Iappropriate ioctl error
In reply to bugzilla at busybox.nethttps://bugs.busybox.net/show_bug.cgi?id=13601
--- Comment #4 from NirajTummala <[email protected]> --- yes i am using WSL2 on latest Windows OS build
Thanks,
niraj
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 13601] Gen image :Iappropriate ioctl error
In reply to bugzilla at busybox.nethttps://bugs.busybox.net/show_bug.cgi?id=13601
--- Comment #5 from Peter Seiderer <[email protected]> --- Patch for buildroot-2021.02 available:
https://patchwork.ozlabs.org/project/buildroot/patch/20210310191651.20769-1-ps.report at gmx.net/
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 13601] Gen image :Iappropriate ioctl error
In reply to bugzilla at busybox.nethttps://bugs.busybox.net/show_bug.cgi?id=13601
--- Comment #6 from Yann E. MORIN <[email protected]> --- *** Bug 13646 has been marked as a duplicate of this bug. ***
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.
[Buildroot] [Bug 13601] Gen image :Iappropriate ioctl error
In reply to bugzilla at busybox.nethttps://bugs.busybox.net/show_bug.cgi?id=13601
Peter Korsgaard <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution|--- |FIXED--- Comment #7 from Peter Korsgaard <[email protected]> --- Fixed in git and will be part of the upcoming 2021.02.1 release:
https://git.buildroot.org/buildroot/commit/?h=2021.02.x&id=9c6c73a22d9208eb924803aaafeb17bc03a90e35
Signature · 2 lines
You are receiving this mail because: You are on the CC list for the bug.