New: USB pass through to qemu/kvm causes CDROM reset and "device not configured"
https://bugzilla.kernel.org/show_bug.cgi?id=207707
Bug ID: 207707
Summary: USB pass through to qemu/kvm causes CDROM reset and
"device not configured"
Product: Virtualization
Version: unspecified
Kernel Version: 4.19.121
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: kvm
Assignee: [email protected]
Reporter: [email protected]
Regression: No
Hello.
I update my 4.19 kernel each Saturday.
In March i wrote a C program that accesses CDDA data (toc, CD-TEXT, etc), and ported it to *BSD via qemu/kvm via USB pass through (i could). I updated the binary (s-cdda) last on March 16th.
Now, two weeks ago i wanted to pass through the USB CD-ROM again, and it did not work no more with error as below. This was directly after updating to qemu 5.0.0, so i reinstalled 4.2.0, with which i did the above, but it did no longer work, too.
This is CRUX-Linux 3.5, and libusb has not changed. The only thing that really changed otherwise is the kernel, i would say.
I used this USB CD-ROM:
May 11 22:25:32 kent kernel: usb 1-1: new high-speed USB device number 5 using xhci_hcd May 11 22:25:32 kent kernel: usb 1-1: New USB device found, idVendor=0e8d, idProduct=1806, bcdDevice= 0.00 May 11 22:25:32 kent kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 May 11 22:25:32 kent kernel: usb 1-1: Product: MT1887 May 11 22:25:32 kent kernel: usb 1-1: Manufacturer: MediaTek Inc May 11 22:25:32 kent kernel: usb 1-1: SerialNumber: S16D6YMG2003AB May 11 22:25:32 kent kernel: usb-storage 1-1:1.0: USB Mass Storage device detected May 11 22:25:32 kent kernel: scsi host0: usb-storage 1-1:1.0 May 11 22:25:33 kent kernel: scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SE-218GN TS00 PQ: 0 ANSI: 0 May 11 22:25:33 kent kernel: sr 0:0:0:0: Power-on or device reset occurred May 11 22:25:33 kent kernel: sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray May 11 22:25:33 kent kernel: cdrom: Uniform CD-ROM driver Revision: 3.20 May 11 22:25:33 kent kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0 May 11 22:25:33 kent kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5
And it works. I start qemu, the device disappears on the host, the guest OS detects it during boot, and this causes a "reset":
May 11 22:27:31 kent kernel: usb 1-1: reset high-speed USB device number 5
using xhci_hcd
After which the device is still not back in the host, and also inaccessible in the guest (FreeBSD says "device not configured" when i try to access it).
Is this right here, or should i open an USB bug?
Happy to help or test, thank you!
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.
[Bug 207707] USB pass through to qemu/kvm causes CDROM reset and "device not configured"
https://bugzilla.kernel.org/show_bug.cgi?id=207707
Steffen Nurpmeso ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Kernel Version|4.19.121 |5.10.10
Resolution|--- |OBSOLETE--- Comment #1 from Steffen Nurpmeso ([email protected]) --- It seems fixed with 5.10.10.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.