New: AACRAID frequent hos bus reset with intensive IO on large arrays
https://bugzilla.kernel.org/show_bug.cgi?id=208605
Bug ID: 208605
Summary: AACRAID frequent hos bus reset with intensive IO on
large arrays
Product: SCSI Drivers
Version: 2.5
Kernel Version: 4.14 - 5.7.8
Hardware: x86-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: AACRAID
Assignee: [email protected]
Reporter: [email protected]
Regression: NoCreated attachment 290345
--> https://bugzilla.kernel.org/attachment.cgi?id=290345&action=edit
quick and dirty patch to fix the issue
On a large array (>15 drives), it is impossible to backup the storage to a SAS tape without the driver detecting a lockup, and causing a bus reset. This seems to be a false detection, as the host controller actually is not locking up anything. It's just a bit delayed.
This issue seems to go back to 4.14.
I reverted some cleanup stuff introduced in 4.14, and the driver is working correctly.
I attached a patch for it, but this is just to show where the bug may be, it is not ready for production (though it works, but this may be for 7 series only). I also have no idea what exactly causes this issue
Bug observed on a series 7 controller with a 12-drive RAID6 array.
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.
[Bug 208605] AACRAID frequent hos bus reset with intensive IO on large arrays
https://bugzilla.kernel.org/show_bug.cgi?id=208605
--- Comment #1 from Janpieter Sollie ([email protected]) --- Sorry, this patch seems to be a false positive ... the error still occurs:scsi_eh_handler still appears, though a little later
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.
[Bug 208605] AACRAID frequent hos bus reset with intensive IO on large arrays
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=208605
Andrey Jr. Melnikov ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #2 from Andrey Jr. Melnikov ([email protected]) --- check this https://patchwork.kernel.org/patch/11038347/
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.
[Bug 208605] AACRAID frequent hos bus reset with intensive IO on large arrays
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=208605
--- Comment #3 from Janpieter Sollie ([email protected]) --- I saw that, the modifications are included in this patch (but for 7 series instead of 6), but they do not seem to work. There must be another issue. I know that the controller works fine when issuing commands like create / erase / repair etc ... but during large IO, it fails. So there must be some sync issue between the scsi subsystem (or the aacraid driver) and the adapter.
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.
[Bug 208605] AACRAID frequent hos bus reset with intensive IO on large arrays
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=208605
--- Comment #4 from Janpieter Sollie ([email protected]) --- Created attachment 290373
--> https://bugzilla.kernel.org/attachment.cgi?id=290373&action=edit
modification to make Microsemi driver work with 5.7 kernel
I know this is bad practice, but at least it produces some results:
I tried the proprietary Microsemi driver (58012). Of course it does not work with recent kernels, but after modifying the code a bit, I made "something" that works.
Patch in attachment. Any idea why this one works but the open source variant does not? When I take a look at the amount of abandoned / junk in the code of Microsemi after modifying, I'd expect the opposite.
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.
[Bug 208605] AACRAID frequent hos bus reset with intensive IO on large arrays
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=208605
--- Comment #5 from Janpieter Sollie ([email protected]) --- I think I found a solution:
When I force sync mode, the driver handles everything perfectly. Off course this has a performance impact, so if anyone could help me debug this driver in async mode, it would be very much appreciated ...
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.
[Bug 208605] AACRAID frequent hos bus reset with intensive IO on large arrays
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=208605
Janpieter Sollie ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution|--- |INVALID--- Comment #6 from Janpieter Sollie ([email protected]) --- the previous setting was no solution. The functionality of the driver is largely reduced. aacraid cache=3 & arcconf setcache ld 1 coff & echo "write through" > /sys/block/sdc/queue/write_cache fixed the issue. This is most probably hardware related. No linux bug
Signature · 2 lines
You are receiving this mail because: You are watching the assignee of the bug.