New: acm_port_activate - usb_submit_urb(ctrl irq) failed after kernel update
https://bugzilla.kernel.org/show_bug.cgi?id=212751
Bug ID: 212751
Summary: acm_port_activate - usb_submit_urb(ctrl irq) failed
after kernel update
Product: Drivers
Version: 2.5
Kernel Version: 5.10.30
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: USB
Assignee: [email protected]
Reporter: [email protected]
Regression: NoSomething between 5.10.26 and 5.20.30 broke (at least) the USB CDC implementation by ST Microsystems on their STM32 devices.
On opending of the device following error occurs:
[ 1333.790160] cdc_acm 1-10:1.0: acm_port_activate - usb_submit_urb(ctrl irq)
failed
5.10.26 works - 5.10.30 does not.
Tested on the 2 identical devices with 2 different firmware (read: different firmware from 2 different developers) on different ports (USB3&USB2) with and without hub.
Additionally, someone else reports similar problems here:
https://forum.manjaro.org/t/usb-device-dev-ttyacm0-throws-i-o-error-on-connect/61385
lsusb dump under 5.10.30:
Bus 001 Device 016: ID 0483:5740 STMicroelectronics Virtual COM Port Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications bDeviceSubClass 2 Abstract (modem) bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0483 STMicroelectronics idProduct 0x5740 Virtual COM Port bcdDevice 2.00 iManufacturer 1 STMicroelectronics iProduct 2 STM32 Virtual ComPort iSerial 3 204E37773453 bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0043
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 0
CDC Header:
bcdCDC 1.10
CDC Call Management:
bmCapabilities 0x00
bDataInterface 1
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
can't get device qualifier: Resource temporarily unavailable can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
Quoted 22 lines · On Thu, Apr 22, 2021 at 04:32:51PM +0000, [email protected]…
https://bugzilla.kernel.org/show_bug.cgi?id=212751
Bug ID: 212751 Summary: acm_port_activate - usb_submit_urb(ctrl irq) failed after kernel update Product: Drivers Version: 2.5 Kernel Version: 5.10.30 Hardware: All OS: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: USB Assignee: [email protected] Reporter: [email protected] Regression: NoSomething between 5.10.26 and 5.20.30 broke (at least) the USB CDC implementation by ST Microsystems on their STM32 devices.
Quoted 6 lines
On opending of the device following error occurs:
[ 1333.790160] cdc_acm 1-10:1.0: acm_port_activate - usb_submit_urb(ctrl irq)failed
5.10.26 works - 5.10.30 does not.
This is likely due to commit 6069e3e927c8 ("USB: cdc-acm: untangle a circular dependency between callback and softint") which had a bug that was just fixed by commit a8b3b519618f ("USB: CDC-ACM: fix poison/unpoison imbalance").
You can try applying the latter yourself but it will otherwise show up in stable soon.
Johan
[Bug 212751] acm_port_activate - usb_submit_urb(ctrl irq) failed after kernel update
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=212751
--- Comment #1 from Johan Hovold ([email protected]) ---
Quoted 22 lines · On Thu, Apr 22, 2021 at 04:32:51PM +0000, [email protected]…
https://bugzilla.kernel.org/show_bug.cgi?id=212751
Bug ID: 212751 Summary: acm_port_activate - usb_submit_urb(ctrl irq) failed after kernel update Product: Drivers Version: 2.5 Kernel Version: 5.10.30 Hardware: All OS: Linux Tree: Mainline Status: NEW Severity: normal Priority: P1 Component: USB Assignee: [email protected] Reporter: [email protected] Regression: NoSomething between 5.10.26 and 5.20.30 broke (at least) the USB CDC implementation by ST Microsystems on their STM32 devices.
Quoted 6 lines
On opending of the device following error occurs:
[ 1333.790160] cdc_acm 1-10:1.0: acm_port_activate - usb_submit_urb(ctrl irq)failed
5.10.26 works - 5.10.30 does not.
This is likely due to commit 6069e3e927c8 ("USB: cdc-acm: untangle a circular dependency between callback and softint") which had a bug that was just fixed by commit a8b3b519618f ("USB: CDC-ACM: fix poison/unpoison imbalance").
You can try applying the latter yourself but it will otherwise show up in stable soon.
Johan
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 212751] acm_port_activate - usb_submit_urb(ctrl irq) failed after kernel update
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=212751
--- Comment #3 from [email protected] --- Can confirm the issue on 5.11.0-17 as well (Ubuntu)
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 212751] acm_port_activate - usb_submit_urb(ctrl irq) failed after kernel update
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=212751
Mateusz ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #4 from Mateusz ([email protected]) --- Found the same issue on ubuntu 18.04 : 4.15.0-144. It started to work properly when tried running at 4.15.0-143.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.