Skip to contentSkip to conversation

New: Cant't shutdown or reboot: loop messages "ext4_writepages: jbd2_start: err -30"

Bug 214327 [email protected] 1 participant 1 message Sep 6, 2021

lore
Share & tools
lore
#0 lore raw

https://bugzilla.kernel.org/show_bug.cgi?id=214327

            Bug ID: 214327
           Summary: Cant't shutdown or reboot: loop messages
                    "ext4_writepages: jbd2_start: err -30"
           Product: File System
           Version: 2.5
    Kernel Version: 5.14.1
          Hardware: x86-64
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: ext4
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No

Created attachment 298677
--> https://bugzilla.kernel.org/attachment.cgi?id=298677&action=edit
reboot/shutdown phase

Hello,
I have my workflow on Debian/Sid, with kernel compiled by
https://www.kernel.org/, currently at version 5.14.1, on asus x555ln notebook.

The problem occurs when the external USB 3 harddisk is disconnected from
itself: in some cases it is no longer reconnected and if I try to do "sync" from console, this command appears freezed.

If I reboot, at the end the system log shows that it has reached the "Rebooting" phase but remains in loops on the message indicated above (see image file).

When this happens, the system should recognize that the harddisk is no longer available or stalled, to interrupt the write of the cache and terminate the reboot or shutdown phase.

Thanks,
Antonio

-- DETAILS --

dmesg:

scsi host4: uas
scsi 4:0:0:0: Direct-Access ASMT 2115 0 PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] Optimal transfer size 33553920 bytes
sda: sda1
sd 4:0:0:0: [sda] Attached SCSI disk
usb 3-1: USB disconnect, device number 8
xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
sd 4:0:0:0: [sda] tag#28 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN sd 4:0:0:0: [sda] tag#28 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.