New: usb-mass storage
https://bugzilla.kernel.org/show_bug.cgi?id=216282
Bug ID: 216282
Summary: usb-mass storage
Product: Drivers
Version: 2.5
Kernel Version: 5.15.0-41-generic
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: USB
Assignee: [email protected]
Reporter: [email protected]
Regression: Nosince Groovy Gorilla, maybe older...
problem #1.
usb mass storage,
delay time is too fast, and there is No .conf in /modprobe.d i have to unplug and plug again the external usb hdd cable turned-on so Linux can detect the HDD and mount.
ASM1051 is detected with $ lsusb
when i turn-on,
but the HDD is Not Detected, because delay time is too fast/short. its like turning-on without a HDD.
upgraded the firmware of the external USB IC controller to latest.
https://github.com/juanpc2018/Asmedia-AS2105-sata-to-USB-3
because large HDDs "over 2TB" was Not working,
Now works ok exept that problem in Linux.
Windows8.1x64 works OK.
problem #2.
Linux detects a different speed?.
$ lsusb Bus 002 Device 004: ID 174c:5106 ASMedia Technology Inc. ASM1051 SATA 3Gb/s bridge
is Not 3Gb/s = 375MB/s.
is 5Gb/s = 550MB/s
when used with SSD,
large 18TB HDD are 250MB/s.
there is something strange going on with usb-mass-storage.
https://support.apple.com/kb/SP710?locale=en_US
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #1 from Alan Stern ([email protected]) --- What delay time are you referring to?
What speed does Linux detect?
What does "lsusb -v" show for this drive?
What shows up in the dmesg log when the HDD is detected and when it is not detected?
In your lsusb output, where it says "ASM1051 SATA 3Gb/s bridge", that 3Gb/s speed is not what Linux detects; it is part of the device's product name.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #2 from [email protected] ---
Detected but No HDD:
$ lsusb -v
Bus 002 Device 009: ID 174c:5106 ASMedia Technology Inc. ASM1051 SATA 3Gb/s bridge
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x5106 ASM1051 SATA 3Gb/s bridge bcdDevice 1.00 iManufacturer 2 Thermaltake iProduct 3 BlacX iSerial 1 000000000002 bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x002c
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
-------------
Detected with HDD:
$ lsusb -v
Bus 002 Device 010: ID 174c:5106 ASMedia Technology Inc. ASM1051 SATA 3Gb/s bridge
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x174c ASMedia Technology Inc. idProduct 0x5106 ASM1051 SATA 3Gb/s bridge bcdDevice 1.00 iManufacturer 2 Thermaltake iProduct 3 BlacX iSerial 1 000000000002 bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x002c
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #3 from [email protected] ---
When you Turn-on the USB3.0 to SATA controller,
electrons travel near the speed of light.
Kernel interupts the CPU very fast, betwenn 1GHz and 2.8Ghz to detect & load drivers.
BUT... the Mechanical HDD needs time to spin-up, when is turned-on, time to reach operating speed of 7200rpm,
Large 3.5" HDD eat more than 3Amps at 12volts dc to spin-up.
USB Mass Storage Needs a Delay, an interrupt wait to read from the controller, wait to initialize, until HDD had enough time to spin-up and read basic info, like Name, File system, etc...
Like the Turtle vs. Rabbit Tale.
-------------
$ sudo dmesg | grep usb
[93862.823187] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd [93862.844103] usb 2-2: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 1.00 [93862.844109] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [93862.844111] usb 2-2: Product: BlacX [93862.844113] usb 2-2: Manufacturer: Thermaltake [93862.844114] usb 2-2: SerialNumber: 000000000002 [93862.881811] usb-storage 2-2:1.0: USB Mass Storage device detected [93862.881944] scsi host2: usb-storage 2-2:1.0 [93862.882037] usbcore: registered new interface driver usb-storage [93862.885157] usbcore: registered new interface driver uas [93887.950491] usb 2-2: reset SuperSpeed USB device number 4 using xhci_hcd [94392.705178] usb 2-2: USB disconnect, device number 4 [94397.329093] usb 2-4: new SuperSpeed USB device number 5 using xhci_hcd [94397.350234] usb 2-4: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 1.00 [94397.350246] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [94397.350252] usb 2-4: Product: BlacX [94397.350255] usb 2-4: Manufacturer: Thermaltake [94397.350259] usb 2-4: SerialNumber: 000000000002 [94397.353440] usb-storage 2-4:1.0: USB Mass Storage device detected [94397.353565] scsi host2: usb-storage 2-4:1.0 [94405.460664] usb 2-2: new SuperSpeed USB device number 6 using xhci_hcd [94405.481472] usb 2-2: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 1.00 [94405.481478] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [94405.481481] usb 2-2: Product: BlacX [94405.481483] usb 2-2: Manufacturer: Thermaltake [94405.481484] usb 2-2: SerialNumber: 000000000001 [94405.483318] usb-storage 2-2:1.0: USB Mass Storage device detected [94405.483606] scsi host3: usb-storage 2-2:1.0 [94845.006638] usb 2-2: USB disconnect, device number 6 [94857.034440] usb 2-4: USB disconnect, device number 5 [96252.135710] usb 2-2: new SuperSpeed USB device number 7 using xhci_hcd [96252.156665] usb 2-2: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 1.00 [96252.156679] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [96252.156685] usb 2-2: Product: BlacX [96252.156689] usb 2-2: Manufacturer: Thermaltake [96252.156693] usb 2-2: SerialNumber: 000000000001 [96252.160248] usb-storage 2-2:1.0: USB Mass Storage device detected [96252.160387] scsi host2: usb-storage 2-2:1.0 [96618.800360] usb 2-2: USB disconnect, device number 7 [96643.705966] usb 2-3.1: new SuperSpeed USB device number 8 using xhci_hcd [96643.726865] usb 2-3.1: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 1.00 [96643.726872] usb 2-3.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [96643.726874] usb 2-3.1: Product: BlacX [96643.726876] usb 2-3.1: Manufacturer: Thermaltake [96643.726877] usb 2-3.1: SerialNumber: 000000000001 [96643.731430] usb-storage 2-3.1:1.0: USB Mass Storage device detected [96643.731717] scsi host2: usb-storage 2-3.1:1.0 [97775.098841] usb 2-3.1: USB disconnect, device number 8 [97789.264277] usb 1-1.4: USB disconnect, device number 14 [109374.033610] usb 2-4: new SuperSpeed USB device number 9 using xhci_hcd [109374.054547] usb 2-4: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 1.00 [109374.054561] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [109374.054567] usb 2-4: Product: BlacX [109374.054571] usb 2-4: Manufacturer: Thermaltake [109374.054575] usb 2-4: SerialNumber: 000000000002 [109374.056168] usb-storage 2-4:1.0: USB Mass Storage device detected [109374.056547] scsi host2: usb-storage 2-4:1.0 [109399.212614] usb 2-4: reset SuperSpeed USB device number 9 using xhci_hcd [109516.959732] usb 2-4: USB disconnect, device number 9 [109519.055610] usb 2-4: new SuperSpeed USB device number 10 using xhci_hcd [109519.076525] usb 2-4: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 1.00 [109519.076540] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [109519.076545] usb 2-4: Product: BlacX [109519.076550] usb 2-4: Manufacturer: Thermaltake [109519.076554] usb 2-4: SerialNumber: 000000000002 [109519.078216] usb-storage 2-4:1.0: USB Mass Storage device detected [109519.078505] scsi host2: usb-storage 2-4:1.0
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #4 from [email protected] ---
Serial number 00001,
its the same enclosure type TT BlacX, i have 2 same,
but 0001 has an SSD Crucial MX500
reads 440MB/s
using gnone-disks benchmark
because its a cheap TLC, but Not as cheap as the BX500 with No ram.
serial 0002 has the mechanical 3.5" HDD.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #5 from [email protected] ---
[110025.067097] usb 2-4: USB disconnect, device number 10
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #6 from [email protected] ---
Similar:
https://superuser.com/questions/1206664/disable-mtp-udev-rules-for-specific-device-so-it-can-be-mount-as-a-usb-mass-stor
No HDD:
$ journalctl -fe
Jul 25 22:52:29 P- kernel: usb 2-4: new SuperSpeed USB device number 11 using xhci_hcd Jul 25 22:52:29 P- kernel: usb 2-4: New USB device found, idVendor=174c, idProduct=5106, bcdDevice= 1.00 Jul 25 22:52:29 P- kernel: usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1 Jul 25 22:52:29 P- kernel: usb 2-4: Product: BlacX Jul 25 22:52:29 P- kernel: usb 2-4: Manufacturer: Thermaltake Jul 25 22:52:29 P- kernel: usb 2-4: SerialNumber: 000000000002 Jul 25 22:52:29 P- kernel: usb-storage 2-4:1.0: USB Mass Storage device detected Jul 25 22:52:29 P- kernel: scsi host2: usb-storage 2-4:1.0 Jul 25 22:52:29 P- mtp-probe[247971]: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4" Jul 25 22:52:29 P- mtp-probe[247971]: bus: 2, device: 11 was not an MTP device Jul 25 22:52:29 P- systemd-udevd[247970]: 2-4:1.0: Process '/usr/lib/snapd/snap-device-helper bind snap_remmina_remmina /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0 0:0' failed with exit code 1. Jul 25 22:52:29 P- mtp-probe[247990]: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4" Jul 25 22:52:29 P- mtp-probe[247990]: bus: 2, device: 11 was not an MTP device Jul 25 22:52:29 P- systemd-udevd[247970]: 2-4: Process
'/usr/lib/snapd/snap-device-helper bind snap_remmina_remmina /devices/pci0000:00/0000:00:14.0/usb2/2-4 189:138' failed with exit code 1.
Jul 25 22:52:36 P- smartd[1378]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 71 to 72 Jul 25 22:52:36 P- smartd[1378]: Device: /dev/sdb [SAT], SMART Usage Attribute:
194 Temperature_Celsius changed from 73 to 75
Jul 25 22:52:44 P- NetworkManager[1318]: <info> [1658807564.5537] dhcp4
(enp3s0f0): state changed new lease, address=192.168.0.00
Jul 25 22:52:54 P- kernel: usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd Jul 25 22:52:58 P- rtkit-daemon[2222]: Supervising 7 threads of 5 processes of 1 users. Jul 25 22:52:58 P- rtkit-daemon[2222]: Supervising 7 threads of 5 processes of
1 users.
HDD OK:
Jul 25 22:59:42 P- kernel: usb 2-4: USB disconnect, device number 11 Jul 25 22:59:42 P- systemd-udevd[249165]: 2-4:1.0: Process '/usr/lib/snapd/snap-device-helper unbind snap_remmina_remmina /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0 0:0' failed with exit code 1. Jul 25 22:59:42 P- systemd-udevd[249159]: 2-4: Process
'/usr/lib/snapd/snap-device-helper unbind snap_remmina_remmina /devices/pci0000:00/0000:00:14.0/usb2/2-4 189:138' failed with exit code 1.
Jul 25 22:59:46 P- kernel: usb 2-4: new SuperSpeed USB device number 12 using
xhci_hcd
Jul 25 22:59:46 P- kernel: usb 2-4: New USB device found, idVendor=174c,
idProduct=5106, bcdDevice= 1.00
Jul 25 22:59:46 P- kernel: usb 2-4: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
Jul 25 22:59:46 P- kernel: usb 2-4: Product: BlacX
Jul 25 22:59:46 P- kernel: usb 2-4: Manufacturer: Thermaltake
Jul 25 22:59:46 P- kernel: usb 2-4: SerialNumber: 000000000002
Jul 25 22:59:46 P- kernel: usb-storage 2-4:1.0: USB Mass Storage device
detected
Jul 25 22:59:46 P- kernel: scsi host2: usb-storage 2-4:1.0
Jul 25 22:59:46 P- mtp-probe[249185]: checking bus 2, device 12:
"/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4"
Jul 25 22:59:46 P- mtp-probe[249185]: bus: 2, device: 12 was not an MTP device
Jul 25 22:59:46 P- systemd-udevd[249180]: 2-4:1.0: Process
'/usr/lib/snapd/snap-device-helper bind snap_remmina_remmina
/devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0 0:0' failed with exit code 1.
Jul 25 22:59:46 P- mtp-probe[249205]: checking bus 2, device 12:
"/sys/devices/pci0000:00/0000:00:14.0/usb2/2-4"
Jul 25 22:59:46 P- mtp-probe[249205]: bus: 2, device: 12 was not an MTP device
Jul 25 22:59:46 P- systemd-udevd[249180]: 2-4: Process
'/usr/lib/snapd/snap-device-helper bind snap_remmina_remmina
/devices/pci0000:00/0000:00:14.0/usb2/2-4 189:139' failed with exit code 1.
Jul 25 22:59:47 P- kernel: scsi 2:0:0:0: Direct-Access ST18000N M013J
GH02 PQ: 0 ANSI: 5
Jul 25 22:59:47 P- kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
Jul 25 22:59:47 P- kernel: sd 2:0:0:0: [sdc] Very big device. Trying to use
READ CAPACITY(16).
Jul 25 22:59:47 P- kernel: sd 2:0:0:0: [sdc] 35156656128 512-byte logical
blocks: (18.0 TB/16.4 TiB)
Jul 25 22:59:47 P- kernel: sd 2:0:0:0: [sdc] Write Protect is off
Jul 25 22:59:47 P- kernel: sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
Jul 25 22:59:47 P- kernel: sd 2:0:0:0: [sdc] No Caching mode page found
Jul 25 22:59:47 P- kernel: sd 2:0:0:0: [sdc] Assuming drive cache: write
through
Jul 25 22:59:47 P- kernel: sdc: sdc1 sdc2
Jul 25 22:59:47 P- kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
Jul 25 22:59:47 P- systemd-udevd[249180]: sdc: Process '/usr/bin/unshare -m
/usr/bin/snap auto-import --mount=/dev/sdc' failed with exit code 1.
Jul 25 22:59:47 P- dbus-daemon[1317]: [system] Activating service
name='org.kde.kded.smart' requested by ':1.52' (uid=1000 pid=2607
comm="/usr/bin/kded5 " label="unconfined") (using servicehelper)
Jul 25 22:59:47 P- dbus-daemon[1317]: [system] Successfully activated service
'org.kde.kded.smart'
Jul 25 22:59:48 P- systemd-udevd[249180]: sdc1: Process '/usr/bin/unshare -m
/usr/bin/snap auto-import --mount=/dev/sdc1' failed with exit code 1.
Jul 25 22:59:48 P- systemd-udevd[249184]: sdc2: Process '/usr/bin/unshare -m
/usr/bin/snap auto-import --mount=/dev/sdc2' failed with exit code 1.
Jul 25 22:59:48 P- kernel: ntfs3: Unknown parameter 'windows_names'Jul 25 22:59:49 P- ntfs-3g[249239]: Version 2021.8.22 integrated FUSE 28 Jul 25 22:59:49 P- ntfs-3g[249239]: Mounted /dev/sdc2 (Read-Write, label "18-TB-1", NTFS 3.1) Jul 25 22:59:49 P- ntfs-3g[249239]: Cmdline options: rw,nodev,nosuid,uid=1000,gid=1000,windows_names,uhelper=udisks2 Jul 25 22:59:49 P- ntfs-3g[249239]: Mount options: nodev,nosuid,uhelper=udisks2,allow_other,nonempty,relatime,rw,default_permissions,fsname=/dev/sdc2,blkdev,blksize=4096 Jul 25 22:59:49 P- ntfs-3g[249239]: Global ownership and permissions enforced, configuration type 7 Jul 25 22:59:49 P- udisksd[1404]: Mounted /dev/sdc2 at /media/mama/18-TB-1 on
behalf of uid 1000
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #7 from [email protected] ---
https://github.com/torvalds/linux/blob/master/drivers/usb/storage/uas-detect.h
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #8 from Alan Stern ([email protected]) --- Some of the things you wrote above are not correct. "When you Turn-on the USB3.0 to SATA controller, electrons travel near the speed of light." Not true at all; electric waves travel near the speed of light but the electrons themselves move at only a few centimeters per second (bulk motion).
Anyway, the information you reported doesn't indicate what's going wrong. I don't think it's simply a matter of waiting for the disk to spin up; the commands sent by the kernel have a 30-second timeout and that should be plenty of time.
A usbmon trace of a non-working connection should help. Before you plug in the USB cable, do:
cat /sys/kernel/debug/usb/usbmon/2u >mon.out
Then after the drive has been plugged in and the drive has failed to appear, kill the "cat" process with ^C and attach the mon.out file to this bug report.
In fact, you might want to do this twice: once where the drive doesn't work, and once where it does work, for comparison.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #9 from [email protected] ---
$ sudo cat /sys/kernel/debug/usb/usbmon/2u >mon.out [sudo] password: cat: /sys/kernel/debug/usb/usbmon/2u: No such file or directory
$ su Password: root@macmini:/home/user# cat /sys/kernel/debug/usb/usbmon/2u >mon.out cat: /sys/kernel/debug/usb/usbmon/2u: No such file or directory
root@macmini:/home/user# whoami root
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #10 from Alan Stern ([email protected]) --- Your system probably didn't mount debugfs for you. You'll have to do:
mount -t debugfs none /sys/kernel/debug
first.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #11 from [email protected] ---
$ sudo mount -t debugfs none /sys/kernel/debug [sudo] password: mount: /sys/kernel/debug: none already mounted on /run/credentials/systemd-sysusers.service.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
Alan Stern ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #12 from Alan Stern ([email protected]) --- I don't understand that error message. Regardless, what you want is the directory on which a debugfs filesystem is mounted. On my system that's /sys/kernel/debug:
$ mount ... debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime,seclabel)
Maybe you need to change the command line to:
mount -t debugfs debugfs /sys/kernel/debug
Or maybe debugfs is already mounted somewhere else. Or maybe your kernel was built without support for debugfs.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #13 from [email protected] ---
$ sudo mount -t debugfs debugfs /sys/kernel/debug [sudo] password: mount: /sys/kernel/debug: debugfs already mounted on /sys/kernel/debug. $ uname -a Linux P- 5.15.0-41-generic #44-Ubuntu SMP Wed Jun 22 14:20:53 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
$ neofetch
`.:/ossyyyysso/:. mac@P-
.:oyyyyyyyyyyyyyyyyyyo:` ------------
-oyyyyyyyodMMyyyyyyyysyyyyo- OS: Kubuntu 22.04 LTS x86_64
-syyyyyyyyyydMMyoyyyydmMMyyyyys- Host: Macmini7,1 1.0
oyyysdMysyyyydMMMMMMMMMMMMMyyyyyyyo Kernel: 5.15.0-41-generic
`oyyyydMMMMysyysoooooodMMMMyyyyyyyyyo` Uptime: 9 hours, 47 mins
oyyyyyydMMMMyyyyyyyyyyyysdMMysssssyyyo Packages: 4488 (dpkg), 28 (snap)
-yyyyyyyydMysyyyyyyyyyyyyyysdMMMMMysyyy- Shell: bash 5.1.16
oyyyysoodMyyyyyyyyyyyyyyyyyyydMMMMysyyyo Resolution: 1920x1080
yyysdMMMMMyyyyyyyyyyyyyyyyyyysosyyyyyyyy DE: Plasma 5.24.4
yyysdMMMMMyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy WM: KWin
oyyyyysosdyyyyyyyyyyyyyyyyyyydMMMMysyyyo WM Theme: Sweet-Dark
-yyyyyyyydMysyyyyyyyyyyyyyysdMMMMMysyyy- Theme: Brisa oscuro [Plasma],
Akamayan-darker [GTK2/3]
oyyyyyydMMMysyyyyyyyyyyysdMMyoyyyoyyyo Icons: breeze-dark [Plasma],
breeze-dark [GTK2/3]
`oyyyydMMMysyyyoooooodMMMMyoyyyyyyyyo Terminal: konsole
oyyysyyoyyyysdMMMMMMMMMMMyyyyyyyyo CPU: Intel i5-4308U (4) @ 3.300GHz
-syyyyyyyyydMMMysyyydMMMysyyyys- GPU: Intel Haswell-ULT
-oyyyyyyydMMyyyyyyysosyyyyo- Memory: 6206MiB / 7827MiB
./oyyyyyyyyyyyyyyyyyyo/.Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #14 from [email protected] ---
$ cat /sys/kernel/debug/usb/usbmon/2u >mon.out cat: /sys/kernel/debug/usb/usbmon/2u: Permission denied
$ sudo cat /sys/kernel/debug/usb/usbmon/2u >mon.out cat: /sys/kernel/debug/usb/usbmon/2u: No such file or directory
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #15 from [email protected] ---
i will try with other linux...
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
Alan Stern ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
CC|[email protected] |
--- Comment #16 from Alan Stern ([email protected]) --- The question is which directory or file on that path is missing. From comment 13, it looks like /sys/kernel/debug/usb should exist. Maybe it doesn't have a usbmon subdirectory because the usbmon module hasn't been loaded. If you do:
modprobe usbmon
it should create that directory and the 2u file within it.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #17 from [email protected] ---
im using another Linux, same usb problem,
but in this linux
$ sudo mount -t debugfs debugfs /sys/kernel/debug
is mounted in /syskernel/debug ok
i can see inside /sys/kernel/debug
with sudo
$ sudo modprobe usbmon works $ sudo cat /sys/kernel/debug/usb/usbmon/2u >mon.out
creates a directory in /sys/kernel/debug/usb
called /usbmon
but nothing happens all files inside are 0kb.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #18 from [email protected] ---
$ neofetch
.+yh mac@macmini71
sMMMo ------------------
sMMN+ OS: pearOS Monterey Beta x86_64
+o: Host: Macmini7,1 1.0
./oyyys+. Kernel: 5.14.0-1036-oem
:dMMMMMMMMMm/ Uptime: 2 hours, 48 mins
:MMMMMMMMMMMMMy Resolution: 1920x1080 @ 60.00Hz
yMMMMMMMMMMMMMN CPU: Intel i5-4308U (4) @ 3.300GHz[49.0°C]
mMMMMMMMMMMMMs` GPU: Intel Haswell-ULT
yMMMMMMMMMMMMo
-mMMMMMMMMMMMMM` Packages: 2789 (dpkg), 17 (snap)
oMMMMMMMMMMMMMMM` Shell: bash 5.0.17
oMMMMMMMMMMMMMMMMy Terminal: konsole
.MMMMMMMMMMMMMMMMMMy`
+MMMMMMMMMMMMMMMMMMMMy/` Memory: 4290MiB / 7832MiB
[--------=======]
/MMMMMMMMMMMMMMMMMMMMMMMNds CPU Usage: 13% [-==============]
`mMMMMMMMMMMMMMMMMMMMMMMMM/ Disk (/): 58G / 103G (60%)
[---------======]
.mMMMMMMMMMMMMMMMMMMMMMM+
`oNMMMMMMMMMMMMMMMMMMd-
`+hMMMMMMMMMMMMMms-
-/osyhhyso:.
Copyright © 2021 Alexandru Balan w/
axtlos
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #19 from Alan Stern ([email protected]) --- Make sure your current directory is something regular, like your home directory. Not something under /sys/ -- those directories aren't writeable.
It's normal for the files under /sys to show up as 0 bytes long in an "ls -l" listing. They aren't real files, but interfaces to the kernel. As long as they do show up at all they should be okay.
While the "cat" process is running, any activity on the USB bus (such as activity caused by plugging in the drive) will get copied to the "mon.out" file.
(By the way, the output from neofetch is not really useful. You might as well stop including it.)
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #20 from [email protected] ---
Created attachment 301515
--> https://bugzilla.kernel.org/attachment.cgi?id=301515&action=edit
monout.txt.zip
$ sudo modprobe usbmon [sudo] password: $ sudo cat /sys/kernel/debug/usb/usbmon/2u >monout.txt
turn-on No HDD
unplug & plug again
HDD mounted automatically.
Safe Remove
^C
1.1MB file
Compress to .zip
Create New Attachment for Bug 216282
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #21 from Alan Stern ([email protected]) ---
It looks like you may be right about the initial time delay being too small. I don't see any significant differences in the usbmon trace between the initial plug-in and the later one, except that the device failed to respond during the initial plug-in when asked to identify itself.
(You can compare them yourself just by looking at the trace file. The initial plug-in is detected at line 7, and the second plug-in is detected at line 193. The lines subsequent to those are virtually identical if you ignore the first two columns, with just one or two unimportant differences -- up until the failure at line 75.)
You can change the length of the time delay by setting the usb-storage delay_use parameter. For instance, assuming that the usb-storage module is already loaded, do:
echo 20 >/sys/module/usb_storage/parameters/delay_use
before you plug in the drive. That will change the delay to 20 seconds (the default delay value is 1 second). Maybe it will help.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #22 from [email protected] ---
1 Fail, yes..
...
4 worked 1x time, because did not waited for hdd platter to stop before turn-on. inertia.
...
10 works but probably more is required for 20TB.
The heavier the platter = more time.
Large HDDs "fail" because are sealed with Helium,
has gas leak,
was Not filled enough at factory,
does Not-pass Quality Control.
Temps are higher, does Not lower fast at Idle.
= more spin-up time,
sold cheaper without warranty. LOL™
creating /etc/modprobe.d/usb-storage.conf
addingdelay_use 15
Fails.
Parameter invalid,
but deletes the folder/sys/module/usb_storage
Edit:
$ sudo tea /sys/module/usb_storage/parameters/delay_use 10
Save
works but...
each reboot Linux changes back to 1
---------------
$ sudo echo 2 >/sys/module/usb_storage/parameters/delay_use bash: /sys/module/usb_storage/parameters/delay_use: Permission denied
Fail,
because modprobe usb-storage is loaded
$ sudo modprobe -r usb_storage [sudo] password: libkmod: ERROR ../libkmod/libkmod-config.c:712 kmod_config_parse: /etc/modprobe.d/usb-storage.conf line 1: ignoring bad line starting with 'delay_use' modprobe: FATAL: Module usb_storage is in use.
$ sudo modprobe -r usb_storage libkmod: ERROR ../libkmod/libkmod-config.c:712 kmod_config_parse: /etc/modprobe.d/usb-storage.conf line 1: ignoring bad line starting with 'delay' modprobe: FATAL: Module usb_storage is in use.
$ sudo modprobe -r usb_storage libkmod: ERROR ../libkmod/libkmod-config.c:712 kmod_config_parse: /etc/modprobe.d/usb-storage.conf line 1: ignoring bad line starting with '2' modprobe: FATAL: Module usb_storage is in use.
$ sudo modprobe -r usb_storage libkmod: ERROR ../libkmod/libkmod-config.c:712 kmod_config_parse: /etc/modprobe.d/usb-storage.conf line 1: ignoring bad line starting with 'delay' modprobe: FATAL: Module usb_storage is in use.
$ sudo modprobe -r usb_storage libkmod: ERROR ../libkmod/libkmod-config.c:712 kmod_config_parse: /etc/modprobe.d/usb-storage.conf line 1: ignoring bad line starting with 'delay-use'
"Works"
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
--- Comment #23 from Alan Stern ([email protected]) --- Your /etc/modprobe.d/usb-storage.conf file didn't work because it had the wrong format. It should contain a line saying:
options usb-storage delay_use=15
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 216282] usb-mass storage
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=216282
[email protected] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution|--- |ANSWEREDSignature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.