Skip to contentSkip to conversation

New: Linux warning `usb: port power management may be unreliable` on Dell XPS 13 9360

Bug 218465 [email protected] 1 participant 6 messages Feb 6, 2024 – Feb 15, 2024 USB

lore
Share & tools
lore
#0 lore raw

https://bugzilla.kernel.org/show_bug.cgi?id=218465

Bug ID: 218465
Summary: Linux warning `usb: port power management may be
unreliable` on Dell XPS 13 9360
Product: Drivers
Version: 2.5
Hardware: All
OS: Linux
Status: NEW
Severity: normal
Priority: P3
Component: USB
Assignee: [email protected]
Reporter: [email protected]
Regression: No

This issue is to attach files to debug the Linux warning reported to linux-usb [1].

[1]:
https://lore.kernel.org/linux-usb/[email protected]/T/#t

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.
#1 lore raw

[Bug 218465] Linux warning `usb: port power management may be unreliable` on Dell XPS 13 9360

https://bugzilla.kernel.org/show_bug.cgi?id=218465

--- Comment #1 from Paul Menzel ([email protected]) --- Created attachment 305840
--> https://bugzilla.kernel.org/attachment.cgi?id=305840&action=edit
Output of acpidump with system firmware 1.21.0

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.
#2 lore raw

[Bug 218465] Linux warning `usb: port power management may be unreliable` on Dell XPS 13 9360

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=218465

--- Comment #2 from Mathias Nyman ([email protected]) --- High-speed (HS) ans SuperSpeed (SS) ports are peered based on their Physical Location Description (_PLD) object in ACPI tables.

The SSDT7 ACPI table dump shows that _PLD is created by calling a GPLD helper method with some parameters. For High-Speed ports (HS0x) this seems to be called with increasing port numer up to HS port 5. From port 6 onwards all parameters are 0.

Scope (\_SB.PCI0.XHC.RHUB.HS01)
Method (_PLD, 0, NotSerialized) // _PLD: Physical Location of Device
Return (GPLD (One, One))

Scope (\_SB.PCI0.XHC.RHUB.HS02)
Method (_PLD, 0, NotSerialized) // _PLD: Physical Location of Device
Return (GPLD (One, 0x02))
...
Scope (\_SB.PCI0.XHC.RHUB.HS05)
Method (_PLD, 0, NotSerialized) // _PLD: Physical Location of Device
Return (GPLD (Zero, 0x05))

Scope (\_SB.PCI0.XHC.RHUB.HS06)
Method (_PLD, 0, NotSerialized) // _PLD: Physical Location of Device
Return (GPLD (Zero, Zero))

Scope (\_SB.PCI0.XHC.RHUB.HS07)
Method (_PLD, 0, NotSerialized) // _PLD: Physical Location of Device
Return (GPLD (Zero, Zero))

For SuperSpeed ports (SS0x) the same is true. Ports 1-

Scope (\_SB.PCI0.XHC.RHUB.SS01)
Method (_PLD, 0, NotSerialized) // _PLD: Physical Location of Device
Return (GPLD (One, One))

Scope (\_SB.PCI0.XHC.RHUB.SS02)
Method (_PLD, 0, NotSerialized) // _PLD: Physical Location of Device
Return (GPLD (One, 0x02))

Scope (\_SB.PCI0.XHC.RHUB.SS03)
Method (_PLD, 0, NotSerialized) // _PLD: Physical Location of Device
Return (GPLD (Zero, Zero))

Scope (\_SB.PCI0.XHC.RHUB.SS04)
Method (_UPC, 0, NotSerialized) // _UPC: USB Port Capabilities
Return (GPLD (Zero, Zero))

Basically all HS port from 6 upwards and SS ports from 3 upwards report the same _PLD, this messes up port peering and results in the following messages during boot:

usb usb2-port1: peered to usb1-port1
usb usb2-port2: peered to usb1-port2
usb usb2-port3: peered to usb1-port6
usb: failed to peer usb2-port4 and usb1-port6 by location (usb2-port4:none) (usb1-port6:usb2-port3)
usb usb2-port4: failed to peer to usb1-port6 (-16)
usb: port power management may be unreliable
usb: failed to peer usb2-port5 and usb1-port6 by location (usb2-port5:none) (usb1-port6:usb2-port3)
usb usb2-port5: failed to peer to usb1-port6 (-16)
usb: failed to peer usb2-port6 and usb1-port6 by location (usb2-port6:none) (usb1-port6:usb2-port3)
usb usb2-port6: failed to peer to usb1-port6 (-16)

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.
#3 lore raw

[Bug 218465] Linux warning `usb: port power management may be unreliable` on Dell XPS 13 9360

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=218465

--- Comment #3 from Paul Menzel ([email protected]) --- Thank you for the analysis. Excuse my ignorance, but does this mean it’s a firmware issue, or Linux’ assumptions are incorrect?

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.
#4 lore raw

[Bug 218465] Linux warning `usb: port power management may be unreliable` on Dell XPS 13 9360

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=218465

Artem S. Tashkinov ([email protected]) changed:

What |Removed |Added
----------------------------------------------------------------------------

             Status|NEW                         |RESOLVED
         Resolution|---                         |DUPLICATE

--- Comment #4 from Artem S. Tashkinov ([email protected]) ---

*** This bug has been marked as a duplicate of bug 218490 ***

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.
#5 lore raw

[Bug 218465] Linux warning `usb: port power management may be unreliable` on Dell XPS 13 9360

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=218465

--- Comment #5 from Mathias Nyman ([email protected]) --- This DELL machine has ACPI entries for USB ports that are not usable. These ports are supported by xHCI host hardware but are not internally or externally connected anywhere. They have _UPC (USB port capability) ACPI objects stating they are not connectable, and _PLD (Physical Location of Device) that just returns 0 for their group token group position.

So all unusable USB2 and USB3 ports have similar _PLD entries, which then confuses Linux when trying to pair together USB2 and USB3 ports.

Linux could probably ignore printing any warning messages for ports that have _PLD entries but _UPC shows they are not connectable

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.