New: mpt3sas add 1000:009f Device ID as SAS9300-4i4e
https://bugzilla.kernel.org/show_bug.cgi?id=219330
Bug ID: 219330
Summary: mpt3sas add 1000:009f Device ID as SAS9300-4i4e
Product: SCSI Drivers
Version: 2.5
Hardware: All
OS: Linux
Status: NEW
Severity: normal
Priority: P3
Component: Other
Assignee: [email protected]
Reporter: [email protected]
Regression: NoI have an LSI 9300-4i4e that identifies with ven/dev ID as follows,
```
# lspci -nnv
[snip]
0004:01:00.0 Mass storage controller [0180]: Broadcom / LSI Device [1000:009f]
(rev 02)
Flags: fast devsel, IRQ 379, IOMMU group 9
I/O ports at 10000 [disabled] [size=256]
Memory at a400000000 (64-bit, non-prefetchable) [disabled] [size=64K]
Expansion ROM at a040000000 [disabled] [size=1M]
Capabilities: [50] Power Management version 3
Capabilities: [68] Express Endpoint, IntMsgNum 0
Capabilities: [d0] Vital Product Data
Capabilities: [a8] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [c0] MSI-X: Enable- Count=16 Masked-
Capabilities: [100] Advanced Error Reporting
Capabilities: [1e0] Secondary PCI Express
Capabilities: [1c0] Power Budgeting <?>
Capabilities: [190] Dynamic Power Allocation <?>
Capabilities: [150] Single Root I/O Virtualization (SR-IOV)
Capabilities: [148] Alternative Routing-ID Interpretation (ARI)
```It seems like most 4i4e cards identify with device ID 0x0097 and I am not sure why this card from the resale market identifies as 0x009f. However all visible labels indicate it is a legitimate 4i4e card.
I was able to update the card firmware to P16 release for LSI 9300-4i4e from the Broadcom website using sas3flsh.exe from DOS.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.