Skip to contentSkip to conversation

New: USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

Bug 219365 [email protected] 1 participant 14 messages Oct 9, 2024 – Feb 26, 2025 Bluetooth drivers

lore
Share & tools
lore

[email protected]

author Tested-by Kiran K
#0 lore raw

https://bugzilla.kernel.org/show_bug.cgi?id=219365

            Bug ID: 219365
           Summary: USB bluetooth dongle stop working after upgrade from
                    6.11.1 to 6.11.2
           Product: Drivers
           Version: 2.5
    Kernel Version: 6.11.2
          Hardware: All
                OS: Linux
            Status: NEW
          Severity: normal
          Priority: P3
         Component: Bluetooth
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: Yes

After upgrading from 6.11.1 to 6.11.2, my bluetooth dongle stop working with the following errors below:

2024-10-09T01:29:45.564367-03:00 r2d2 kernel: usb 1-1: new full-speed USB
device number 19 using xhci_hcd
2024-10-09T01:29:45.695468-03:00 r2d2 kernel: usb 1-1: New USB device found,
idVendor=0a12, idProduct=0001, bcdDevice=88.91
2024-10-09T01:29:45.695539-03:00 r2d2 kernel: usb 1-1: New USB device strings:
Mfr=0, Product=2, SerialNumber=0
2024-10-09T01:29:45.695557-03:00 r2d2 kernel: usb 1-1: Product: BT DONGLE10
2024-10-09T01:29:45.705487-03:00 r2d2 kernel: Bluetooth: hci1: CSR: Setting up
dongle with HCI ver=6 rev=3120
2024-10-09T01:29:45.705563-03:00 r2d2 kernel: Bluetooth: hci1: LMP ver=6
subver=22bb; manufacturer=10
2024-10-09T01:29:45.705573-03:00 r2d2 kernel: Bluetooth: hci1: CSR: Unbranded
CSR clone detected; adding workarounds and force-suspending once...
2024-10-09T01:29:45.705581-03:00 r2d2 kernel: Bluetooth: hci1: CSR: Couldn't
suspend the device for our Barrot 8041a02 receive-issue workaround
2024-10-09T01:29:45.705588-03:00 r2d2 kernel: Bluetooth: hci1: HCI Delete
Stored Link Key command is advertised, but not supported.
2024-10-09T01:29:45.705594-03:00 r2d2 kernel: Bluetooth: hci1: HCI Read Default
Erroneous Data Reporting command is advertised, but not supported.
2024-10-09T01:29:45.705602-03:00 r2d2 kernel: Bluetooth: hci1: HCI Set Event
Filter command not supported.
2024-10-09T01:29:45.716675-03:00 r2d2 systemd[1]: Starting
systemd-rfkill.service - Load/Save RF Kill Switch Status...
2024-10-09T01:29:45.793744-03:00 r2d2 systemd[1]: Started
systemd-rfkill.service - Load/Save RF Kill Switch Status.
2024-10-09T01:29:47.774485-03:00 r2d2 kernel: Bluetooth: hci1: Opcode 0x1004
failed: -110
2024-10-09T01:29:47.774559-03:00 r2d2 kernel: Bluetooth: hci1: command 0x1004
tx timeout
2024-10-09T01:29:50.804490-03:00 r2d2 systemd[1]: systemd-rfkill.service:

Deactivated successfully.

The dongle used: Bus 001 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)

It works fine under Windows and kernel 6.11.1

I have to copy the following files from 6.11.1 and rebuild the kernel to make the dongle work with 6.11.2

drivers/bluetooth/btusb.c
include/net/bluetooth/hci_core.h
net/bluetooth/hci_conn.c
net/bluetooth/hci_sync.c
net/bluetooth/mgmt.c

Theses files were changed from the following commits between 6.11.1 and 6.11.2

5 days Bluetooth: btusb: Fix not handling ZPL/short-transfer Luiz Augusto
von Dentz 1 -1/+4

[ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ]

Requesting transfers of the exact same size of wMaxPacketSize may result in ZPL/short-transfer since the USB stack cannot handle it as we are limiting the buffer size to be the same as wMaxPacketSize.

Also, in terms of throughput this change has the same effect to interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput by increasing the frame size" had for the bulk endpoint, so users of the advertisement bearer (e.g. BT Mesh) may benefit from this change.

Fixes 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB

devices")

5 days Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Luiz Augusto von Dentz 1 -1/+4

[ Upstream commit cfbfeee61582e638770a1a10deef866c9adb38f5 ]

This ignores errors from HCI_OP_REMOTE_NAME_REQ_CANCEL since it shouldn't interfere with the stopping of discovery and in certain conditions it seems to be failing.

Fixes d0b137062b2d ("Bluetooth: hci_sync: Rework init stages")

5 days Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED Luiz Augusto
von Dentz 3 -10/+13

[ Upstream commit d47da6bd4cfa982fe903f33423b9e2ec541e9496 ]

If HCI_CONN_MGMT_CONNECTED has been set then the event shall be HCI_CONN_MGMT_DISCONNECTED.

Fixes b644ba336997 ("Bluetooth: Update device_connected and device_found

events to latest API")

Maybe is one or all commits has caused the regression on my BT dongle

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#1 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

https://bugzilla.kernel.org/show_bug.cgi?id=219365

Paul Menzel ([email protected]) changed:

What |Removed |Added
----------------------------------------------------------------------------

                 CC|                            |pmenzel+bugzilla.kernel.org
                   |                            |@molgen.mpg.de

--- Comment #1 from Paul Menzel ([email protected]) --- Thank you for your report, and great that you can build the Linux kernel yourself.

Quoted 1 line

Maybe is one or all commits has caused the regression on my BT dongle

It’d be great if you tested each of the three commits. (Normally, git bisect start -- drivers/bluetooth/btusb.c net/bluetooth/, and then git bisect good v6.11.1 and git bisect bad v6.11.2, would do that automatically.)

If you already have git clone, then:

git remote add stable
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
git fetch stable

or, if you do not,

git clone
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git

Then

    git reset --hard f68f72d04b60d3af36b63b888fe084966bca07b9

build and test. If it does *not* work, it’s the fault commit.

Then

    git reset --hard 846a6fc7860119ee72737391856497b3fcf7c2b5

If it does *not* work, it’s the fault commit.

Then

    git reset --hard 8603daa4300b84abb3c68e48f3b607d7d5a2a207

If it does *not* work, it’s the fault commit.

It’d be also good to know, if it works with current Linux master branch, or 6.12-rc2.

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#2 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

--- Comment #2 from Adilson Dantas ([email protected]) --- I tested each commit with 6.11.2 and 6.12-rc2 and I have isolated the regression at commit 8603daa4300b84abb3c68e48f3b607d7d5a2a207

Bluetooth: btusb: Fix not handling ZPL/short-transfer

[ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ]

Reverting this commit fix the regression on my BT dongle.

(In reply to Paul Menzel from comment #1)

Quoted 41 lines

Thank you for your report, and great that you can build the Linux kernel yourself.

Quoted 1 line

Maybe is one or all commits has caused the regression on my BT dongle

It’d be great if you tested each of the three commits. (Normally, git bisect start -- drivers/bluetooth/btusb.c net/bluetooth/, and then git bisect good v6.11.1 and git bisect bad v6.11.2, would do that automatically.)

If you already have git clone, then:

git remote add stable
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
git fetch stable

or, if you do not,

git clone
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git

Then

    git reset --hard f68f72d04b60d3af36b63b888fe084966bca07b9

build and test. If it does *not* work, it’s the fault commit.

Then

    git reset --hard 846a6fc7860119ee72737391856497b3fcf7c2b5

If it does *not* work, it’s the fault commit.

Then

    git reset --hard 8603daa4300b84abb3c68e48f3b607d7d5a2a207

If it does *not* work, it’s the fault commit.

It’d be also good to know, if it works with current Linux master branch, or 6.12-rc2.

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#3 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

--- Comment #3 from The Linux kernel's regression tracker (Thorsten Leemhuis) ([email protected]) --- Thx for the bisection. As Paul mentioned earlier: "It’d be also good to know,
if it works with current Linux master branch, or 6.12-rc2." I'd say it's not
only "good to know", it's requires, as that determines whom we need to contact.

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#4 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

--- Comment #4 from Adilson Dantas ([email protected]) --- (In reply to The Linux kernel's regression tracker (Thorsten Leemhuis) from comment #3)

Quoted 4 lines

Thx for the bisection. As Paul mentioned earlier: "It’d be also good to know, if it works with current Linux master branch, or 6.12-rc2." I'd say it's not only "good to know", it's requires, as that determines whom we need to contact.

I also tested with 6.12-rc2 and it is affected by this regression.

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#5 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

--- Comment #5 from Luiz Von Dentz ([email protected]) --- Crap, looks like these old CSR dongle don't really handle the ZPL/sort-transfers, so we will likely need some workaround for these, most likely a new quirk.

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#6 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

Luiz Von Dentz ([email protected]) changed:

What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]

--- Comment #6 from Luiz Von Dentz ([email protected]) ---
I guess we need to USB traces to check if that really what is at play since we are giving a bigger buffer to the USB stack perhaps it expecting the ZLP to finish the transfer but it never happens for some reason.

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#7 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

--- Comment #7 from Adilson Dantas ([email protected]) --- Created attachment 306997
--> https://bugzilla.kernel.org/attachment.cgi?id=306997&action=edit
Trace usbmon file from a kernel without the fault commit.

Trace usbmon file from a kernel without the fault commit.

My BT dongle works fine when it is plugged

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#8 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

--- Comment #8 from Adilson Dantas ([email protected]) --- Created attachment 306998
--> https://bugzilla.kernel.org/attachment.cgi?id=306998&action=edit
Trace usbmon file from a kernel with the fault commit.

Trace usbmon file from a kernel with the fault commit.

My BT Dongle fails when it is plugged.

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#9 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

--- Comment #9 from Adilson Dantas ([email protected]) --- (In reply to Luiz Von Dentz from comment #6)

Quoted 3 lines

I guess we need to USB traces to check if that really what is at play since we are giving a bigger buffer to the USB stack perhaps it expecting the ZLP to finish the transfer but it never happens for some reason.

I upload two traces from usbmon module.

One from a kernel without the fault commit. So it is working fine.

And another from a kernel with the fault commit. It fails when is plugged.

I hope that theses files should help

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#11 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

--- Comment #11 from Adilson Dantas ([email protected]) --- (In reply to Luiz Von Dentz from comment #10)

Quoted 2 lines

https://patchwork.kernel.org/project/bluetooth/patch/20241015153719.497388-1-
[email protected]/

I tested this patch with 6.11.3 and it worked with my BT dongle.

Thanks.

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#12 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

Adilson Dantas ([email protected]) changed:

What |Removed |Added
----------------------------------------------------------------------------

             Status|NEW                         |RESOLVED
         Resolution|---                         |IMPLEMENTED

--- Comment #12 from Adilson Dantas ([email protected]) --- Closing it since this regression is resolved with kernel 6.11.5.

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
#13 lore raw

[Bug 219365] USB bluetooth dongle stop working after upgrade from 6.11.1 to 6.11.2

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219365

[email protected] changed:

What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]

--- Comment #13 from [email protected] ---
(In reply to Luiz Von Dentz from comment #5)

Quoted 3 lines

Crap, looks like these old CSR dongle don't really handle the ZPL/sort-transfers, so we will likely need some workaround for these, most likely a new quirk.

Same issue (with same BT adapter) after upgrade from 6.8.0-52 to 6.8.0-53 and/or 6.8.0-54 (Ubuntu 24.04 LTS, Linux Mint 22.1)

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.