Skip to contentSkip to conversation

New: Need help with Product: CSR8510 A10

Bug 219410 [email protected] 1 participant 3 messages Oct 21, 2024 – Jul 15 Bluetooth drivers

lore
Share & tools
lore

[email protected]

author
#0 lore raw

https://bugzilla.kernel.org/show_bug.cgi?id=219410

            Bug ID: 219410
           Summary: Need help with Product: CSR8510 A10
           Product: Drivers
           Version: 2.5
          Hardware: AMD
                OS: Linux
            Status: NEW
          Severity: normal
          Priority: P3
         Component: Bluetooth
          Assignee: [email protected]
          Reporter: [email protected]
        Regression: No

Help please, who can tell me what changes to the code need to be made to make the bluetooth device work
I can provide any data, command output/dumps of device operation

At the moment the output of the dmesg command:

[41142.022157] usb 5-2.1: new full-speed USB device number 17 using xhci_hcd
[41142.229393] usb 5-2.1: New USB device found, idVendor=0a12, idProduct=0001,
bcdDevice=25.20
[41142.229405] usb 5-2.1: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[41142.229410] usb 5-2.1: Product: CSR8510 A10
[41142.241228] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=9 rev=3120
[41142.241244] Bluetooth: hci0: LMP ver=9 subver=22bb; manufacturer=10
[41142.241249] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding
workarounds and force-suspending once...
[41152.439058] usb 5-2.1: Failed to suspend device, error -110
[41152.439073] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot
8041a02 receive-issue workaround
[41152.439149] Bluetooth: hci0: HCI Delete Stored Link Key command is
advertised, but not supported.
[41152.439153] Bluetooth: hci0: HCI Read Default Erroneous Data Reporting
command is advertised, but not supported.
[41152.439156] Bluetooth: hci0: HCI Set Event Filter command not supported.
[41154.453944] Bluetooth: hci0: Opcode 0x0c03 failed: -110

I tried changing the flags in the btusb.c file that are in the Barrot 8041a02 block.
but obviously my knowledge is not enough, if anyone is willing to help, I would be grateful.

the device comes with a disk for windows7 and works well, also under windows10 install the drivers without the disk, the device works as well

If it is possible to customize the device, these fixes can be put into bluetooth drivers for all users who have this device

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
author
#1 lore raw

[Bug 219410] Need help with Product: CSR8510 A10

https://bugzilla.kernel.org/show_bug.cgi?id=219410

--- Comment #1 from hhsnake ([email protected]) --- Added output cat /sys/kernel/debug/usb/devices

T:  Bus=05 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 17 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a12 ProdID=0001 Rev=25.20
S:  Product=CSR8510 A10
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=82(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=82(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=82(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=82(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=82(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=82(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.
author
#2 lore raw

[Bug 219410] Need help with Product: CSR8510 A10

In reply to [email protected]

https://bugzilla.kernel.org/show_bug.cgi?id=219410

hhsnake ([email protected]) changed:

What |Removed |Added
----------------------------------------------------------------------------

             Status|NEW                         |RESOLVED
         Resolution|---                         |CODE_FIX

--- Comment #2 from hhsnake ([email protected]) --- fixed https://github.com/hhsnake/csr8510-fix

Signature · 4 lines
You may reply to this email to add a comment.

You are receiving this mail because:
You are the assignee for the bug.