New: xhci_pci does not activate uPD720202
https://bugzilla.kernel.org/show_bug.cgi?id=219616
Bug ID: 219616
Summary: xhci_pci does not activate uPD720202
Product: Drivers
Version: 2.5
Kernel Version: 6.12.5
Hardware: All
OS: Linux
Status: NEW
Severity: blocking
Priority: P3
Component: USB
Assignee: [email protected]
Reporter: [email protected]
CC: [email protected]
Regression: YesConcerning:
04:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02) (prog-if 30 [XHCI])
Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at fe6fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
Although xhci_pci is loaded, lsusb does not show any Linux Foundation 3.0 root hub.
Device is detected and works properly, when computer is booted with 6.11.0.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 219616] xhci_pci does not activate uPD720202
https://bugzilla.kernel.org/show_bug.cgi?id=219616
Michał Pecio ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #1 from Michał Pecio ([email protected]) --- Is this lspci output from the working 6.11 system?
On 6.12 you should see
Kernel driver in use: xhci-pci-renesas Kernel modules: xhci_pci, xhci_pci_renesas
and you need CONFIG_USB_XHCI_PCI_RENESAS to have this module if you are building your own kernel, see commit 25f51b76f90f.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 219616] xhci_pci does not activate uPD720202
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=219616
Artem S. Tashkinov ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |NEEDINFO
--- Comment #2 from Artem S. Tashkinov ([email protected]) --- Please bisect:
https://docs.kernel.org/admin-guide/bug-bisect.html
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.
[Bug 219616] xhci_pci does not activate uPD720202
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=219616
Harald Buchholz ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |RESOLVED
Resolution|--- |ANSWERED--- Comment #3 from Harald Buchholz ([email protected]) --- CONFIG_USB_XHCI_PCI_RENESAS and loading this module make it work. This option and module weren't required in 5.x.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.