New: Intel CNVi: Wi-Fi roam drops active Bluetooth audio, ACL stays up (8086:e440 / 8086:e476)
https://bugzilla.kernel.org/show_bug.cgi?id=222120
Bug ID: 222120
Summary: Intel CNVi: Wi-Fi roam drops active Bluetooth audio,
ACL stays up (8086:e440 / 8086:e476)
Product: Drivers
Version: 2.5
Hardware: Intel
OS: Linux
Status: NEW
Severity: normal
Priority: P3
Component: Bluetooth
Assignee: [email protected]
Reporter: [email protected]
Regression: NoHardware
00:14.3 Wi-Fi [8086:e440] iwlwifi
firmware 106.c88d33af.0 sc-a0-wh-b0-c106.ucode (iwlmld)
00:14.7 Bluetooth [8086:e476] btintel_pcie
Headset: EDIFIER ClearCall 200, 0C:AE:BD:D3:B9:40
A2DP (SBC XQ) and HFP. The device stayed connected.
Software
Linux 7.2.9-2-cachyos (CachyOS build of tag cachyos-7.2.9-2) BlueZ 5.87, PipeWire 1.6.9
Bluetooth firmware: intel/ibt-00a0-01a1-pci.sfi
version 214-29.26, timestamp 2026.29 build 96982, SHA1 0x239ed887
Audio was playing. Wi-Fi roamed. The A2DP and SCO transports went idle. bluetoothd logged nothing. btintel_pcie logged nothing. PipeWire then printed:
spa.bluez5: Failure in Bluetooth audio transport .../sep1/fd0 pw.node: (bluez_output....) running -> error (Received error event)
That PipeWire line is what it prints when an A2DP sink that was already running leaves the active state.
Local time 2026-10-12, UTC+8. wlp0s20f3 lines are
"disconnect from AP <bssid> for new auth to <bssid>", all under 20:df:73.
16:00:38 roam 16:00:54 A2DP sep1/fd0 dies 16:00:55 roam 16:01:12 roam 16:01:32 SCO fd49 dies 16:01:38 A2DP sep1/fd0 dies again 16:01:46 roam
From 15:44 to 16:02 the same ESS roamed nine times. Those three audio failures are inside that window.
btintel_pcie has no path that tears down A2DP or SCO because iwlwifi roamed. The ACL stayed up. The controller dropped the audio channel while Wi-Fi was using the radio.
Boot log, separate from the drop. DSBR was applied. Bluetooth still came up. The .ddc file is 16 bytes. The first record is ID 0x0128, value 0x18. btintel_load_ddc_config() sends HCI 0xfc8b and returns on the first error, so ID 0x0126 is never sent. The caller ignores the error.
Bluetooth: hci0: dsbr: enable: 0x01 value: 0x0b
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-00a0-01a1-pci.ddc
Bluetooth: hci0: Failed to send Intel_Write_DDC (-95)
This is not Launchpad 2088151. That one is Write_DDC -16, then hardware error 0x0f, on intel/ibt-0093-0291.ddc.
Same PCI id, different bug: kernel bug 221346 is a shutdown hang in synchronize_irq().
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are the assignee for the bug.