New: 6.18: AMD (Ryzen 5): cannot select existing energy_performance_preference
https://bugzilla.kernel.org/show_bug.cgi?id=222146
Bug ID: 222146
Summary: 6.18: AMD (Ryzen 5): cannot select existing
energy_performance_preference
Product: Power Management
Version: 2.5
Hardware: All
OS: Linux
Status: NEW
Severity: normal
Priority: P3
Component: cpufreq
Assignee: [email protected]
Reporter: [email protected]
Regression: No
Hello! I sail 6.18.newest and since some weeks (possibly: since "custom", whatever this is, is listed) my self-knitted "cpupower" shell script fails like so:
/root/bin/cpupower.sh: 1: echo: echo: I/O error
ERR:CPU 0: write for energy_performance_preference=balance_performance failed
Ie it cannot set that even though it is reported to exist (the script refetches what is available after settings are changed):
CPU 0: freq: 406477-3201000; scaling: 406477-3201000; boost:0; gov: powersave
(performance powersave); energy: performance (default performance balance_performance balance_power power custom)
On the terminal:
#?0|lecce:~# cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences default performance balance_performance balance_power power custom #?0|lecce:~# echo balance_performance > /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference -su: echo: write error: Device or resource busy #?1|lecce:~# cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference performance
It works when i switch to all-performance, when i build, for example:
CPU 0: freq: 406477-4979334; scaling: 406477-4979334; boost:1; gov:
performance (performance powersave); energy: performance (performance)
And it worked everwhere just smoothly before.
Thanks again, a lot. I love it!
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are the assignee for the bug.
[Bug 222146] 6.18: AMD (Ryzen 5): cannot select existing energy_performance_preference
https://bugzilla.kernel.org/show_bug.cgi?id=222146
Artem S. Tashkinov ([email protected]) changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution|--- |INSUFFICIENT_DATA--- Comment #1 from Artem S. Tashkinov ([email protected]) --- This kernel is not supported.
Please try 7.2.11.
If the issue is still reproducible, provide your full CPU identification string.
Ryzen 5 covers multiple generations of CPUs.
lscpu output will suffice.
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are the assignee for the bug.
[Bug 222146] 6.18: AMD (Ryzen 5): cannot select existing energy_performance_preference
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=222146
--- Comment #2 from Steffen Nurpmeso ([email protected]) --- (for your possible interest)
What do you mean by "kernel not supported"? I use the latest LTS, just like AlpineLinux. And it all worked until a few versions back?
(I mean, it is not something "terrible", i just thought i report the problem, because it is a "detoriation of state" that lasts for now several kernel updates.)
lscpu nonetheless and in short is
Vendor ID: AuthenticAMD
Model name: AMD Ryzen 5 220 w/ Radeon 740M Graphics
CPU family: 25
Model: 124
Thread(s) per core: 1
Core(s) per socket: 6
Socket(s): 1
Stepping: 0
Microcode version: 0xa70c00a
Frequency boost: enabled
CPU(s) scaling MHz: 39%
CPU max MHz: 3201.0000
CPU min MHz: 406.4770CPU(s): 12 On-line CPU(s) list: 0-10:2 Off-line CPU(s) list: 1-11:2
# bin/cpupower.sh CPU 0: freq: 406477-3201000; scaling: 406477-640200; boost:0; gov: powersave (performance powersave); energy: performance (default performance balance_performance balance_power power custom) CPU 2: freq: 406477-3201000; scaling: 406477-640200; boost:0; gov: powersave (performance powersave); energy: performance (default performance balance_performance balance_power power custom) CPU 4: freq: 406477-3201000; scaling: 406477-640200; boost:0; gov: powersave (performance powersave); energy: performance (default performance balance_performance balance_power power custom) CPU 6: freq: 406477-3201000; scaling: 406477-640200; boost:0; gov: powersave (performance powersave); energy: performance (default performance balance_performance balance_power power custom) CPU 8: freq: 406477-3201000; scaling: 406477-640200; boost:0; gov: powersave (performance powersave); energy: performance (default performance balance_performance balance_power power custom) CPU 10: freq: 406477-3201000; scaling: 406477-640200; boost:0; gov: powersave (performance powersave); energy: performance (default performance balance_performance balance_power power custom) P-
(energy "should" be "power" in this state, and was until a few weeks ago.)
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are the assignee for the bug.
[Bug 222146] 6.18: AMD (Ryzen 5): cannot select existing energy_performance_preference
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=222146
--- Comment #3 from Steffen Nurpmeso ([email protected]) --- merde, of course you can have full lscpu or whatever you want!! Thanks, indeed.
(I was only sad because of that AMD "territorial pissing" as via
lid_exists() {
if [ -z "$LID" ]; then
# Documentation/firmware-guide/acpi/acpi-lid.rst
LID=/proc/acpi/button/lid/LID0/state
[ -f "$LID" ] && return 0
# amd ryzen 5 220, linux 6.18
LID=/proc/acpi/button/lid/LID/state
[ -f "$LID" ] && return 0
LID=.
fi
[ "$LID" != . ] }
Cool that really someone deals with bugzilla!!!)
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 48 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 12
On-line CPU(s) list: 0-10:2
Off-line CPU(s) list: 1-11:2
Vendor ID: AuthenticAMD
Model name: AMD Ryzen 5 220 w/ Radeon 740M Graphics
CPU family: 25
Model: 124
Thread(s) per core: 1
Core(s) per socket: 6
Socket(s): 1
Stepping: 0
Microcode version: 0xa70c00a
Frequency boost: enabled
CPU(s) scaling MHz: 39%
CPU max MHz: 3201.0000
CPU min MHz: 406.4770
BogoMIPS: 6390.28
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrrpge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep
_good amd_lbr_v2 nopl xtopology nonstop_tsc cpuidextd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx
f16c rdrand lahf_lm cmp_legacy svm extapiccr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_l
lc mwaitx cpuid_fault cpb cat_l3 cdp_l3 hw_pstate
ssbd mba perfmon_v2 ibrs ibpb stibp ibrs_enhanced vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a av
x512f avx512dq rdseed adx smap avx512ifma
clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm
_mbm_local avx512_bf16 clzero irperf xsaveerptr
rdpru wbnoinvd cppc arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pf
threshold vgif x2avic v_spec_ctrl vnmi avx512vbmi
umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq rdpid overflow_recov
succor smca fsrm flush_l1d amd_lbr_pmc_freeze
Virtualization features:
Virtualization: AMD-V
Caches (sum of all):
L1d: 192 KiB (6 instances) L1i: 192 KiB (6 instances) L2: 6 MiB (6 instances) L3: 16 MiB (1 instance)
NUMA:
NUMA node(s): 1
NUMA node0 CPU(s): 0-10:2
Vulnerabilities:
Gather data sampling: Not affected
Ghostwrite: Not affected
Indirect target selection: Not affected
Itlb multihit: Not affected L1tf: Not affected Mds: Not affected Meltdown: Not affected Mmio stale data: Not affected Old microcode: Not affected Reg file data sampling: Not affected Retbleed: Not affected Spec rstack overflow: Vulnerable Spec store bypass: Mitigation; Speculative Store Bypass disabled via
prctl
Spectre v1: Mitigation; usercopy/swapgs barriers and __user
pointer sanitization
Spectre v2: Mitigation; Enhanced / Automatic IBRS; IBPB
conditional; STIBP always-on; PBRSB-eIBRS Not affected; BHI Not affected
Srbds: Not affected Tsa: Mitigation; Clear CPU buffers Tsx async abort: Not affected Vmscape: Mitigation; IBPB before exit to userspace
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are the assignee for the bug.
[Bug 222146] 6.18: AMD (Ryzen 5): cannot select existing energy_performance_preference
In reply to [email protected]https://bugzilla.kernel.org/show_bug.cgi?id=222146
--- Comment #4 from Artem S. Tashkinov ([email protected]) --- Wait, have you tested 7.2.11 or 7.3?
Signature · 4 lines
You may reply to this email to add a comment. You are receiving this mail because: You are the assignee for the bug.