New: netperf-2.4.5 fails to compile

Buildroot bugzilla at busybox.net 1 participant 7 messages Feb 18, 2011 – Sep 18, 2011

Share & tools

bugzilla at busybox.net

author

2011-02-18 03:08 UTC #0 lore raw

https://bugs.busybox.net/show_bug.cgi?id=3271

Summary: netperf-2.4.5 fails to compile
Product: buildroot
Version: unspecified
Platform: PC
OS/Version: Linux
Status: NEW
Severity: minor
Priority: P5
Component: Other
AssignedTo: unassigned at buildroot.uclibc.org
ReportedBy: keguang.zhang at gmail.com
CC: buildroot at uclibc.org
Estimated Hours: 0.0

if /home/kelvin/buildroot/output/host/usr/bin/arm-unknown-linux-uclibcgnueabi-gcc --sysroot=/home/kelvin/buildroot/output/host/usr/arm-unknown-linux-uclibcgnueabi/sysroot
-DHAVE_CONFIG_H -I. -I. -I.. -pipe -Os -mtune=arm926ej-s -march=armv5te
-mabi=aapcs-linux -msoft-float -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -MT netslot_linux.o -MD -MP -MF

".deps/netslot_linux.Tpo" \
          -c -o netslot_linux.o `test -f 'netslot_linux.c' || echo
'./'`netslot_linux.c; \
        then mv -f ".deps/netslot_linux.Tpo" ".deps/netslot_linux.Po"; \
        else rm -f ".deps/netslot_linux.Tpo"; exit 1; \
        fi

netslot_linux.c:2:17: error: ftw.h: No such file or directory netslot_linux.c:13: warning: 'struct FTW' declared inside parameter list netslot_linux.c:13: warning: its scope is only this definition or declaration, which is probably not what you want
netslot_linux.c:13: warning: 'struct stat' declared inside parameter list netslot_linux.c: In function 'find_slot':
netslot_linux.c:24: error: dereferencing pointer to incomplete type netslot_linux.c: At top level:
netslot_linux.c:68: warning: 'struct FTW' declared inside parameter list netslot_linux.c:68: warning: 'struct stat' declared inside parameter list netslot_linux.c: In function 'find_interface':
netslot_linux.c:73: error: dereferencing pointer to incomplete type netslot_linux.c: In function 'find_interface_slot':
netslot_linux.c:100: error: 'FTW_PHYS' undeclared (first use in this function) netslot_linux.c:100: error: (Each undeclared identifier is reported only once netslot_linux.c:100: error: for each function it appears in.) make[4]: *** [netslot_linux.o] ?? 1
make[4]: *** ??????????....
make[4]:?????? `/home/kelvin/buildroot/output/build/netperf-2.4.5/src' make[3]: *** [all-recursive] ?? 1
make[3]:?????? `/home/kelvin/buildroot/output/build/netperf-2.4.5/src' make[2]: *** [all-recursive] ?? 1
make[2]:?????? `/home/kelvin/buildroot/output/build/netperf-2.4.5' make[1]: *** [all] ?? 2
make[1]:?????? `/home/kelvin/buildroot/output/build/netperf-2.4.5'
make: *** [/home/kelvin/buildroot/output/build/netperf-2.4.5/.stamp_built] ?? 2

Signature · 3 lines

Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.

bugzilla at busybox.net

author

2011-02-18 03:12 UTC #1 lore raw

[Buildroot] [Bug 3271] netperf-2.4.5 fails to compile

https://bugs.busybox.net/show_bug.cgi?id=3271

--- Comment #1 from Kelvin Cheung <[email protected]> --- This error comes out when I use Crosstool-NG toolchain.

Signature · 3 lines

Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.

bugzilla at busybox.net

author

2011-09-02 03:53 UTC #2 lore raw

[Buildroot] [Bug 3271] netperf-2.4.5 fails to compile

In reply to bugzilla at busybox.net

https://bugs.busybox.net/show_bug.cgi?id=3271

??? <[email protected]> changed:

What |Removed |Added
----------------------------------------------------------------------------
CC| |xiaxiaojin at safefw.com

--- Comment #2 from ??? <[email protected]> ---
I downloaded the file from the following address. Switch to the chroot, compile netperf-2.4.5 failed. The following error:
?http://uclibc.org/downloads/binaries/0.9.30.1/system-image-i686.tar.bz2?

make[3]: Leaving directory /tmp/netperf-2.4.5/src/missing' make[3]: Entering directory /tmp/netperf-2.4.5/src'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT netslot_linux.o -MD -MP -MF

".deps/netslot_linux.Tpo" \
          -c -o netslot_linux.o `test -f 'netslot_linux.c' || echo
'./'`netslot_linux.c; \
        then mv -f ".deps/netslot_linux.Tpo" ".deps/netslot_linux.Po"; \
        else rm -f ".deps/netslot_linux.Tpo"; exit 1; \
        fi

netslot_linux.c:2:17: error: ftw.h: No such file or directory netslot_linux.c:13: warning: 'struct FTW' declared inside parameter list netslot_linux.c:13: warning: its scope is only this definition or declaration, which is probably not what you want
netslot_linux.c:13: warning: 'struct stat' declared inside parameter list netslot_linux.c: In function 'find_slot':
netslot_linux.c:24: error: dereferencing pointer to incomplete type netslot_linux.c: At top level:
netslot_linux.c:68: warning: 'struct FTW' declared inside parameter list netslot_linux.c:68: warning: 'struct stat' declared inside parameter list netslot_linux.c: In function 'find_interface':
netslot_linux.c:73: error: dereferencing pointer to incomplete type netslot_linux.c: In function 'find_interface_slot':
netslot_linux.c:100: error: 'FTW_PHYS' undeclared (first use in this function) netslot_linux.c:100: error: (Each undeclared identifier is reported only once netslot_linux.c:100: error: for each function it appears in.) make[3]: *** [netslot_linux.o] Error 1
make[3]: Leaving directory `/tmp/netperf-2.4.5/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/tmp/netperf-2.4.5/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/netperf-2.4.5'
make: *** [all] Error 2

Signature · 3 lines

Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.

bugzilla at busybox.net

author

2011-09-02 04:19 UTC #3 lore raw

[Buildroot] [Bug 3271] netperf-2.4.5 fails to compile

In reply to bugzilla at busybox.net

https://bugs.busybox.net/show_bug.cgi?id=3271

--- Comment #3 from Kelvin Cheung <[email protected]> --- (In reply to comment #2)

Quoted 28 lines

I downloaded the file from the following address. Switch to the chroot, compile netperf-2.4.5 failed. The following error:
?http://uclibc.org/downloads/binaries/0.9.30.1/system-image-i686.tar.bz2?
make[3]: Leaving directory /tmp/netperf-2.4.5/src/missing' make[3]: Entering directory /tmp/netperf-2.4.5/src'
if gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT netslot_linux.o -MD -MP -MF
".deps/netslot_linux.Tpo" \
          -c -o netslot_linux.o `test -f 'netslot_linux.c' || echo
'./'`netslot_linux.c; \
        then mv -f ".deps/netslot_linux.Tpo" ".deps/netslot_linux.Po"; \
        else rm -f ".deps/netslot_linux.Tpo"; exit 1; \
        fi
netslot_linux.c:2:17: error: ftw.h: No such file or directory netslot_linux.c:13: warning: 'struct FTW' declared inside parameter list netslot_linux.c:13: warning: its scope is only this definition or declaration, which is probably not what you want
netslot_linux.c:13: warning: 'struct stat' declared inside parameter list netslot_linux.c: In function 'find_slot':
netslot_linux.c:24: error: dereferencing pointer to incomplete type netslot_linux.c: At top level:
netslot_linux.c:68: warning: 'struct FTW' declared inside parameter list netslot_linux.c:68: warning: 'struct stat' declared inside parameter list netslot_linux.c: In function 'find_interface':
netslot_linux.c:73: error: dereferencing pointer to incomplete type netslot_linux.c: In function 'find_interface_slot':
netslot_linux.c:100: error: 'FTW_PHYS' undeclared (first use in this function) netslot_linux.c:100: error: (Each undeclared identifier is reported only once

Quoted 8 lines

netslot_linux.c:100: error: for each function it appears in.) make[3]: *** [netslot_linux.o] Error 1
make[3]: Leaving directory `/tmp/netperf-2.4.5/src' make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/tmp/netperf-2.4.5/src' make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/netperf-2.4.5'
make: *** [all] Error 2

What toolchain did you use?
Crosstool-NG?

Signature · 3 lines

Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.

bugzilla at busybox.net

author

2011-09-02 04:24 UTC #4 lore raw

[Buildroot] [Bug 3271] netperf-2.4.5 fails to compile

In reply to bugzilla at busybox.net

https://bugs.busybox.net/show_bug.cgi?id=3271

--- Comment #4 from ??? <[email protected]> ---
I downloaded the file from the following address. Switch to the chroot, compile
http://uclibc.org/downloads/binaries/0.9.30.1/system-image-i686.tar.bz2?

# tar xjf system-image-i686.tar.bz2
# tar xjf netperf-2.4.5.tar.bz2 -C rootfs/tmp
# chroot rootfs
# cd /tmp/netperf-2.4.5

/tmp/netperf-2.4.5 # gcc -v
Invoked as gcc
Reference path: /bin/..
arg[ 0] = rawgcc
arg[ 1] = -U__nptl__
arg[ 2] = -v
Using built-in specs.
Target: i686-unknown-linux
Configured with:
/home/landley/firmware-0.9.6/build/temp-i686/gcc-core/configure --prefix=/home/landley/firmware-0.9.6/build/mini-native-i686/usr --disable-multilib --build=x86_64-walrus-linux --host=i686-unknown-linux --target=i686-unknown-linux --enable-long-long --enable-c99 --enable-shared --enable-threads=posix --enable-__cxa_atexit --disable-nls --enable-languages=c,c++ --disable-libstdcxx-pch --enable-sjlj-exceptions --program-prefix=
Thread model: posix
gcc version 4.1.2
/tmp/netperf-2.4.5 # ls /lib/libc*
/lib/libc.a /lib/libcares.so.2 /lib/libcrypt.so.0
/lib/libcurl.so
/lib/libc.so /lib/libcares.so.2.0.0 /lib/libcrypto.a
/lib/libcurl.so.4
/lib/libc.so.0 /lib/libcom_err.a /lib/libcrypto.so
/lib/libcurl.so.4.2.0
/lib/libcares.a /lib/libcrypt-0.9.30.1.so /lib/libcrypto.so.0.9.8
/lib/libcurses.a
/lib/libcares.la /lib/libcrypt.a /lib/libcurl.a
/lib/libcurses.so
/lib/libcares.so /lib/libcrypt.so /lib/libcurl.la

/tmp/netperf-2.4.5 # ls /lib/ld-uClibc*
/lib/ld-uClibc-0.9.30.1.so /lib/ld-uClibc.so.0
/tmp/netperf-2.4.5 #

CPU? Intel(R) Pentium(R) 4 CPU 2.40GHz
MEM? 512MB

Signature · 3 lines

Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.

bugzilla at busybox.net

author

2011-09-02 04:32 UTC #5 lore raw

[Buildroot] [Bug 3271] netperf-2.4.5 fails to compile

In reply to bugzilla at busybox.net

https://bugs.busybox.net/show_bug.cgi?id=3271

--- Comment #5 from Kelvin Cheung <[email protected]> --- (In reply to comment #4)

Quoted 39 lines

I downloaded the file from the following address. Switch to the chroot, compile
http://uclibc.org/downloads/binaries/0.9.30.1/system-image-i686.tar.bz2?
# tar xjf system-image-i686.tar.bz2
# tar xjf netperf-2.4.5.tar.bz2 -C rootfs/tmp
# chroot rootfs
# cd /tmp/netperf-2.4.5
/tmp/netperf-2.4.5 # gcc -v
Invoked as gcc
Reference path: /bin/..
arg[ 0] = rawgcc
arg[ 1] = -U__nptl__
arg[ 2] = -v
Using built-in specs.
Target: i686-unknown-linux
Configured with:
/home/landley/firmware-0.9.6/build/temp-i686/gcc-core/configure --prefix=/home/landley/firmware-0.9.6/build/mini-native-i686/usr --disable-multilib --build=x86_64-walrus-linux --host=i686-unknown-linux --target=i686-unknown-linux --enable-long-long --enable-c99 --enable-shared --enable-threads=posix --enable-__cxa_atexit --disable-nls --enable-languages=c,c++ --disable-libstdcxx-pch --enable-sjlj-exceptions --program-prefix=
Thread model: posix
gcc version 4.1.2
/tmp/netperf-2.4.5 # ls /lib/libc*
/lib/libc.a /lib/libcares.so.2 /lib/libcrypt.so.0
/lib/libcurl.so
/lib/libc.so /lib/libcares.so.2.0.0 /lib/libcrypto.a
/lib/libcurl.so.4
/lib/libc.so.0 /lib/libcom_err.a /lib/libcrypto.so
/lib/libcurl.so.4.2.0
/lib/libcares.a /lib/libcrypt-0.9.30.1.so /lib/libcrypto.so.0.9.8
/lib/libcurses.a
/lib/libcares.la /lib/libcrypt.a /lib/libcurl.a
/lib/libcurses.so
/lib/libcares.so /lib/libcrypt.so /lib/libcurl.la

Quoted 7 lines

/tmp/netperf-2.4.5 # ls /lib/ld-uClibc*
/lib/ld-uClibc-0.9.30.1.so /lib/ld-uClibc.so.0
/tmp/netperf-2.4.5 #
CPU? Intel(R) Pentium(R) 4 CPU 2.40GHz
MEM? 512MB

Seems like the toolchain's problem.

Signature · 3 lines

Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.

bugzilla at busybox.net

author

2011-09-18 10:22 UTC #6 lore raw

[Buildroot] [Bug 3271] netperf-2.4.5 fails to compile

In reply to bugzilla at busybox.net

https://bugs.busybox.net/show_bug.cgi?id=3271

Thomas Petazzoni <[email protected]> changed:

What |Removed |Added
----------------------------------------------------------------------------

             Status|NEW                         |RESOLVED
         Resolution|                            |WONTFIX

--- Comment #6 from Thomas Petazzoni <[email protected]> --- netperf requires the ftw() function and related structures to be supported by the toolchain. The default configuration of uClibc included in Buildroot makes sure that the generated toolchain has support for ftw():

UCLIBC_HAS_FTW=y

So if you generate a toolchain with Crosstool-NG, it's up to you to make sure that the uClibc of that toolchain has the required features. Buildroot cannot support all possible variants of uClibc configurations, so in a generic way, we only support the configuration we provide in toolchain/uClibc.

Signature · 3 lines

Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.