Skip to contentSkip to conversation

Virtio-user PMD Cannot Send/Receive Packets when 2M Hugepages arre Enabled

dpdk-dev [email protected] 1 participant 2 messages Dec 15, 2020 – Dec 17, 2020

lore
Share & tools
lore

[email protected]

author
#0 lore raw

https://bugs.dpdk.org/show_bug.cgi?id=601

Bug ID: 601
Summary: Virtio-user PMD Cannot Send/Receive Packets when 2M
Hugepages arre Enabled
Product: DPDK
Version: 20.11
Hardware: All
OS: Linux
Status: UNCONFIRMED
Severity: normal
Priority: Normal
Component: vhost/virtio
Assignee: [email protected]
Reporter: [email protected]
Target Milestone: ---

I am attempting to duplicate the virtio-user/vhost-user configuration mentioned in https://doc.dpdk.org/guides/howto/virtio_user_for_container_networking.html,
only without the container. When I run the following commands on an x86/POWER host with 1GB hugepages enabled, packets are transmitted/received as shown by the command "show port stats all". However, if the same system is configured with 2MB hugepages, no error are shown and no traffic is passed between the testpmd instances.

$ sudo /home/drc/src/dpdk/build/app/dpdk-testpmd 
--log-level="pmd.net.virtio.init,debug"
--log-level="pmd.net.virtio.driver,debug" --no-pci --file-prefix=virtio
--vdev=virtio_user0,path=/tmp/sock0 -- -i
testpmd> start
$ sudo /home/drc/src/dpdk/build/app/dpdk-testpmd
--log-level="pmd.net.vhost,debug" --no-pci --file-prefix=vhost-client --vdev
'net_vhost0,iface=/tmp/sock0' -- -i
testpmd> start tx_first

The main difference observed in the debug output appears to be additional instances of VHOST_SET_MEM_TABLE being generated when 2MB hugepages are used.

Debug logging is enabled for both instances as shown below:

$ sudo /home/drc/src/dpdk/build/app/dpdk-testpmd
--log-level="pmd.net.vhost,debug" --no-pci --file-prefix=vhost-client --vdev
'net_vhost0,iface=/tmp/sock0' -- -i
EAL: Detected 32 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/vhost-client/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: No available hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: VFIO support initialized
Initializing pmd_vhost for net_vhost0
Creating VHOST-USER backend on numa socket 0
EAL: No legacy callbacks, legacy socket not created
Interactive-mode selected
testpmd: create a new mbuf pool <mb_pool_0>: n=267456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc

Warning! port-topology=paired and odd forward ports number, the last port will pair with itself.

Configuring Port 0 (socket 0)
VHOST_CONFIG: vhost-user server: socket created, fd: 83
VHOST_CONFIG: bind to /tmp/sock0
Port 0: 56:48:4F:53:54:00
Checking link statuses...
Done
testpmd> VHOST_CONFIG: new vhost user connection is 395
VHOST_CONFIG: new device, handle is 0
VHOST_CONFIG: read message VHOST_USER_SET_OWNER
VHOST_CONFIG: read message VHOST_USER_GET_FEATURES
VHOST_CONFIG: read message VHOST_USER_GET_PROTOCOL_FEATURES
VHOST_CONFIG: read message VHOST_USER_SET_PROTOCOL_FEATURES
VHOST_CONFIG: negotiated Vhost-user protocol features: 0x10009
VHOST_CONFIG: read message VHOST_USER_SET_VRING_CALL
VHOST_CONFIG: vring call idx:0 file:396
VHOST_CONFIG: read message VHOST_USER_SET_VRING_CALL
VHOST_CONFIG: vring call idx:1 file:397
VHOST_CONFIG: read message VHOST_USER_SET_FEATURES
VHOST_CONFIG: negotiated Virtio features: 0x910008000
VHOST_CONFIG: read message VHOST_USER_SET_STATUS
VHOST_CONFIG: New device status(0x0000000b):

        -RESET: 0
        -ACKNOWLEDGE: 1
        -DRIVER: 1
        -FEATURES_OK: 1
        -DRIVER_OK: 0
        -DEVICE_NEED_RESET: 0
        -FAILED: 0

VHOST_CONFIG: read message VHOST_USER_GET_STATUS
VHOST_CONFIG: read message VHOST_USER_GET_STATUS
VHOST_CONFIG: read message VHOST_USER_SET_MEM_TABLE
VHOST_CONFIG: guest memory region 0, size: 0x200000

         guest physical addr: 0x100200000
         guest virtual  addr: 0x100200000
         host  virtual  addr: 0x7eff04200000
         mmap addr : 0x7eff04200000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0

VHOST_CONFIG: read message VHOST_USER_SET_VRING_NUM
VHOST_CONFIG: read message VHOST_USER_SET_VRING_BASE
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ADDR
VHOST_CONFIG: read message VHOST_USER_SET_VRING_KICK
VHOST_CONFIG: vring kick idx:0 file:399 vring0 is enabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_NUM
VHOST_CONFIG: read message VHOST_USER_SET_VRING_BASE
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ADDR
VHOST_CONFIG: read message VHOST_USER_SET_VRING_KICK
VHOST_CONFIG: vring kick idx:1 file:400 vring1 is enabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 1 to qp idx: 0
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 1 to qp idx: 1
VHOST_CONFIG: read message VHOST_USER_SET_STATUS
VHOST_CONFIG: New device status(0x0000000f):

        -RESET: 0
        -ACKNOWLEDGE: 1
        -DRIVER: 1
        -FEATURES_OK: 1
        -DRIVER_OK: 1
        -DEVICE_NEED_RESET: 0
        -FAILED: 0

VHOST_CONFIG: virtio is now ready for processing.
Vhost device 0 created

Port 0: link state change event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 0 to qp idx: 0 vring0 is disabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 0 to qp idx: 1 vring1 is disabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_MEM_TABLE
VHOST_CONFIG: guest memory region 0, size: 0x200000

         guest physical addr: 0x100200000
         guest virtual  addr: 0x100200000
         host  virtual  addr: 0x7eff04200000
         mmap addr : 0x7eff04200000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0
VHOST_CONFIG: guest memory region 1, size: 0x200000
         guest physical addr: 0x100400000
         guest virtual  addr: 0x100400000
         host  virtual  addr: 0x7efefc400000
         mmap addr : 0x7efefc400000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0
VHOST_CONFIG: guest memory region 2, size: 0x200000
         guest physical addr: 0x100600000
         guest virtual  addr: 0x100600000
         host  virtual  addr: 0x7efefc200000
         mmap addr : 0x7efefc200000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0
VHOST_CONFIG: guest memory region 3, size: 0x200000
         guest physical addr: 0x100800000
         guest virtual  addr: 0x100800000
         host  virtual  addr: 0x7efef5c00000
         mmap addr : 0x7efef5c00000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0

VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 1 to qp idx: 0 vring0 is enabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 1 to qp idx: 1 vring1 is enabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 0 to qp idx: 0 vring0 is disabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 0 to qp idx: 1 vring1 is disabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_MEM_TABLE
VHOST_CONFIG: guest memory region 0, size: 0x200000

         guest physical addr: 0x100200000
         guest virtual  addr: 0x100200000
         host  virtual  addr: 0x7eff04200000
         mmap addr : 0x7eff04200000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0
VHOST_CONFIG: guest memory region 1, size: 0x200000
         guest physical addr: 0x100400000
         guest virtual  addr: 0x100400000
         host  virtual  addr: 0x7efefc400000
         mmap addr : 0x7efefc400000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0
VHOST_CONFIG: guest memory region 2, size: 0x200000
         guest physical addr: 0x100600000
         guest virtual  addr: 0x100600000
         host  virtual  addr: 0x7efefc200000
         mmap addr : 0x7efefc200000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0
VHOST_CONFIG: guest memory region 3, size: 0x200000
         guest physical addr: 0x100800000
         guest virtual  addr: 0x100800000
         host  virtual  addr: 0x7efef5c00000
         mmap addr : 0x7efef5c00000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0
VHOST_CONFIG: guest memory region 4, size: 0x200000
         guest physical addr: 0x100a00000
         guest virtual  addr: 0x100a00000
         host  virtual  addr: 0x7efef5a00000
         mmap addr : 0x7efef5a00000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0
VHOST_CONFIG: guest memory region 5, size: 0x200000
         guest physical addr: 0x100c00000
         guest virtual  addr: 0x100c00000
         host  virtual  addr: 0x7efef5800000
         mmap addr : 0x7efef5800000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0
VHOST_CONFIG: guest memory region 6, size: 0x200000
         guest physical addr: 0x100e00000
         guest virtual  addr: 0x100e00000
         host  virtual  addr: 0x7efef5600000
         mmap addr : 0x7efef5600000
         mmap size : 0x200000
         mmap align: 0x200000
         mmap off  : 0x0

VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 1 to qp idx: 0 vring0 is enabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 1 to qp idx: 1 vring1 is enabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 0 to qp idx: 0 vring0 is disabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 0 to qp idx: 1 vring1 is disabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 1 to qp idx: 0 vring0 is enabled

Port 0: queue state event
VHOST_CONFIG: read message VHOST_USER_SET_VRING_ENABLE
VHOST_CONFIG: set queue enable: 1 to qp idx: 1 vring1 is enabled

Port 0: queue state event

testpmd> show port info all

********************* Infos for port 0 ********************* MAC address: 56:48:4F:53:54:00
Device name: net_vhost0
Driver name: net_vhost
Firmware-version: not available
Devargs: iface=/tmp/sock0
Connect to socket: 0
memory allocation on the socket: 0
Link status: up
Link speed: 10 Gbps
Link duplex: full-duplex
MTU: 1500
Promiscuous mode: enabled
Allmulticast mode: enabled
Maximum number of MAC addresses: 1
Maximum number of MAC addresses of hash filtering: 0 VLAN offload:
strip off, filter off, extend off, qinq strip off
No RSS offload flow type is supported.
Minimum size of RX buffer: 0
Maximum configurable length of RX packet: 4294967295 Maximum configurable size of LRO aggregated packet: 0 Current number of RX queues: 1
Max possible RX queues: 1
Max possible number of RXDs per queue: 65535
Min possible number of RXDs per queue: 0
RXDs number alignment: 1
Current number of TX queues: 1
Max possible TX queues: 1
Max possible number of TXDs per queue: 65535
Min possible number of TXDs per queue: 0
TXDs number alignment: 1
Max segment number per packet: 65535
Max segment number per MTU/TSO: 65535

$ sudo /home/drc/src/dpdk/build/app/dpdk-testpmd 
--log-level="pmd.net.virtio.init,debug"
--log-level="pmd.net.virtio.driver,debug" --no-pci --file-prefix=virtio
--vdev=virtio_user0,path=/tmp/sock0 -- -i
EAL: Detected 32 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/virtio/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: No available hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: VFIO support initialized
virtio_user_pmd_probe(): Backend type detected: VHOST_USER
vhost_user_sock(): VHOST_SET_OWNER
vhost_user_sock(): VHOST_GET_FEATURES
vhost_user_sock(): VHOST_USER_GET_PROTOCOL_FEATURES
vhost_user_sock(): VHOST_USER_SET_PROTOCOL_FEATURES
vhost_user_sock(): VHOST_SET_STATUS
vhost_user_sock(): VHOST_GET_STATUS
vhost_user_sock(): VHOST_GET_STATUS
vhost_user_sock(): VHOST_SET_STATUS
vhost_user_sock(): VHOST_GET_STATUS
vhost_user_sock(): VHOST_SET_STATUS
virtio_negotiate_features(): guest_features before negotiate = 8000005f10ef8028
virtio_negotiate_features(): host_features before negotiate = 910019983
virtio_negotiate_features(): features after negotiate = 910018000
vhost_user_sock(): VHOST_GET_STATUS
vhost_user_sock(): VHOST_SET_VRING_CALL
vhost_user_sock(): VHOST_SET_VRING_CALL
vhost_user_sock(): VHOST_SET_FEATURES
virtio_user_dev_set_features(): set features: 910008000
vhost_user_sock(): VHOST_SET_STATUS
vhost_user_sock(): VHOST_GET_STATUS
virtio_user_dev_update_status(): Updated Device Status(0x0000000b):
        -RESET: 0
        -ACKNOWLEDGE: 1
        -DRIVER: 1
        -DRIVER_OK: 0
        -FEATURES_OK: 1
        -DEVICE_NEED_RESET: 0
        -FAILED: 0
virtio_init_device(): PORT MAC: 86:E1:DF:59:EA:33
virtio_init_device(): link speed = -1, duplex = 0
virtio_init_device(): config->max_virtqueue_pairs=1
virtio_init_queue(): setting up queue: 0 on NUMA node -1
virtio_init_queue(): vq_size: 256
virtio_init_queue(): vring_size: 10244, rounded_vring_size: 12288
virtio_init_queue(): vq->vq_ring_mem:      0x1003ad000
virtio_init_queue(): vq->vq_ring_virt_mem: 0x1003ad000
virtio_init_vring():  >>
virtio_init_queue(): setting up queue: 1 on NUMA node -1
virtio_init_queue(): vq_size: 256
virtio_init_queue(): vring_size: 10244, rounded_vring_size: 12288
virtio_init_queue(): vq->vq_ring_mem:      0x1003a8000
virtio_init_queue(): vq->vq_ring_virt_mem: 0x1003a8000
virtio_init_vring():  >>
vhost_user_sock(): VHOST_GET_STATUS
virtio_user_dev_update_status(): Updated Device Status(0x0000000b):
        -RESET: 0
        -ACKNOWLEDGE: 1
        -DRIVER: 1
        -DRIVER_OK: 0
        -FEATURES_OK: 1
        -DEVICE_NEED_RESET: 0
        -FAILED: 0

vhost_user_sock(): VHOST_SET_MEM_TABLE
update_memory_region(): index=0 fd=81 offset=0x0 addr=0x100200000 len=2097152 vhost_user_sock(): VHOST_SET_VRING_NUM
vhost_user_sock(): VHOST_SET_VRING_BASE
vhost_user_sock(): VHOST_SET_VRING_ADDR
vhost_user_sock(): VHOST_SET_VRING_KICK
vhost_user_sock(): VHOST_SET_VRING_NUM
vhost_user_sock(): VHOST_SET_VRING_BASE
vhost_user_sock(): VHOST_SET_VRING_ADDR
vhost_user_sock(): VHOST_SET_VRING_KICK
vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_STATUS
EAL: No legacy callbacks, legacy socket not created vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_MEM_TABLE
update_memory_region(): index=0 fd=81 offset=0x0 addr=0x100200000 len=2097152 update_memory_region(): index=1 fd=88 offset=0x0 addr=0x100400000 len=2097152 update_memory_region(): index=2 fd=89 offset=0x0 addr=0x100600000 len=2097152 update_memory_region(): index=3 fd=90 offset=0x0 addr=0x100800000 len=2097152 vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_VRING_ENABLE
Interactive-mode selected
Warning: NUMA should be configured manually by using --port-numa-config and --ring-numa-config parameters along with --numa.
testpmd: create a new mbuf pool <mb_pool_0>: n=267456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_MEM_TABLE
update_memory_region(): index=0 fd=81 offset=0x0 addr=0x100200000 len=2097152 update_memory_region(): index=1 fd=88 offset=0x0 addr=0x100400000 len=2097152 update_memory_region(): index=2 fd=89 offset=0x0 addr=0x100600000 len=2097152 update_memory_region(): index=3 fd=90 offset=0x0 addr=0x100800000 len=2097152 update_memory_region(): index=4 fd=92 offset=0x0 addr=0x100a00000 len=2097152 update_memory_region(): index=5 fd=93 offset=0x0 addr=0x100c00000 len=2097152 update_memory_region(): index=6 fd=94 offset=0x0 addr=0x100e00000 len=2097152 vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_MEM_TABLE
update_memory_region(): index=0 fd=81 offset=0x0 addr=0x100200000 len=2097152 update_memory_region(): index=1 fd=88 offset=0x0 addr=0x100400000 len=2097152 update_memory_region(): index=2 fd=89 offset=0x0 addr=0x100600000 len=2097152 update_memory_region(): index=3 fd=90 offset=0x0 addr=0x100800000 len=2097152 update_memory_region(): index=4 fd=92 offset=0x0 addr=0x100a00000 len=2097152 update_memory_region(): index=5 fd=93 offset=0x0 addr=0x100c00000 len=2097152 update_memory_region(): index=6 fd=94 offset=0x0 addr=0x100e00000 len=2097152 update_memory_region(): index=7 fd=95 offset=0x0 addr=0x101000000 len=2097152 update_memory_region(): Too many memory regions vhost_user_sock(): VHOST_SET_VRING_ENABLE
vhost_user_sock(): VHOST_SET_VRING_ENABLE

Warning! port-topology=paired and odd forward ports number, the last port will pair with itself.

Configuring Port 0 (socket 0)

virtio_dev_configure(): configure
virtio_dev_tx_queue_setup():  >>
virtio_dev_rx_queue_setup():  >>

virtio_dev_rx_queue_setup_finish(): >> virtio_dev_rx_queue_setup_finish(): Allocated 256 bufs virtio_dev_tx_queue_setup_finish(): >>
virtio_dev_start(): nb_queues=1
virtio_dev_start(): Notified backend at initialization set_rxtx_funcs(): virtio: using inorder Tx path on port 0 set_rxtx_funcs(): virtio: using inorder Rx path on port 0 virtio_dev_link_update(): Get link status from hw virtio_dev_link_update(): Port 0 is up virtio_dev_promiscuous_disable(): host does not support rx control virtio_dev_allmulticast_disable(): host does not support rx control Port 0: 86:E1:DF:59:EA:33
Checking link statuses...
Done
virtio_dev_promiscuous_enable(): host does not support rx control Error during enabling promiscuous mode for port 0: Operation not supported - ignore
testpmd> show port info all

********************* Infos for port 0 *********************
MAC address: 86:E1:DF:59:EA:33
Device name: virtio_user0
Driver name: net_virtio_user
Firmware-version: not available
Devargs: path=/tmp/sock0
Connect to socket: 0
memory allocation on the socket: 0
Link status: up
Link speed: Unknown
Link duplex: half-duplex
MTU: 1500
Promiscuous mode: disabled
Allmulticast mode: disabled
Maximum number of MAC addresses: 64
Maximum number of MAC addresses of hash filtering: 0
VLAN offload:
strip off, filter off, extend off, qinq strip off
No RSS offload flow type is supported.
Minimum size of RX buffer: 64
Maximum configurable length of RX packet: 9728
Maximum configurable size of LRO aggregated packet: 0
Current number of RX queues: 1
Max possible RX queues: 1
Max possible number of RXDs per queue: 65535
Min possible number of RXDs per queue: 0
RXDs number alignment: 1
Current number of TX queues: 1
Max possible TX queues: 1
Max possible number of TXDs per queue: 65535
Min possible number of TXDs per queue: 0
TXDs number alignment: 1
Max segment number per packet: 65535
Max segment number per MTU/TSO: 65535
testpmd> start tx_first
io packet forwarding - ports=1 - cores=1 - streams=1 - NUMA support enabled, MP allocation mode: native
Logical Core 1 (socket 0) forwards packets on 1 streams:
RX P=0/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00

io packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=1 port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=0
RX threshold registers: pthresh=0 hthresh=0 wthresh=0 RX Offloads=0x0
TX queue: 0
TX desc=0 - TX free threshold=0
TX threshold registers: pthresh=0 hthresh=0 wthresh=0 TX offloads=0x0 - TX RS bit threshold=0
testpmd> show port stats all

######################## NIC statistics for port 0 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 32 TX-errors: 0 TX-bytes: 2048

Throughput (since last show)

  Rx-pps:            0          Rx-bps:            0
  Tx-pps:            0          Tx-bps:            0

############################################################################
testpmd> show port stats all

######################## NIC statistics for port 0 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 32 TX-errors: 0 TX-bytes: 2048

Throughput (since last show)

  Rx-pps:            0          Rx-bps:            0
  Tx-pps:            0          Tx-bps:            0

############################################################################

Signature · 2 lines
You are receiving this mail because:
You are the assignee for the bug.
author
#1 lore raw

[dpdk-dev] [Bug 601] Virtio-user PMD Cannot Send/Receive Packets when 2M Hugepages are Enabled

https://bugs.dpdk.org/show_bug.cgi?id=601

David Christensen ([email protected]) changed:

What |Removed |Added
----------------------------------------------------------------------------

         Resolution|---                         |FIXED
             Status|UNCONFIRMED                 |RESOLVED

--- Comment #2 from David Christensen ([email protected]) --- Following directions in Comment 1 resolved the issue.

Signature · 2 lines
You are receiving this mail because:
You are the assignee for the bug.