Skip to contentSkip to conversation

ixgbe: 82599 chksum rx offload marks UDP packets over IPv4 with zero checksum as CKSUM_BAD

dpdk-dev [email protected] 1 participant 2 messages Jan 29, 2021 – Feb 10, 2021

lore
Share & tools
lore
#0 lore raw

https://bugs.dpdk.org/show_bug.cgi?id=629

Bug ID: 629
Summary: ixgbe: 82599 chksum rx offload marks UDP packets over
IPv4 with zero checksum as CKSUM_BAD
Product: DPDK
Version: 20.11
Hardware: All
OS: All
Status: UNCONFIRMED
Severity: normal
Priority: Normal
Component: ethdev
Assignee: [email protected]
Reporter: [email protected]
Target Milestone: ---

on ixgbe (in particular on 82599 hw) when receiving UDP packets with zero checksum (no checksum) over IPv4,
ol_flags PKT_RX_L4_CKSUM_BAD bit is set, whereas PKT_RX_L4_CKSUM_GOOD was expected instead.

That happens because of a hardware errata [1], but still, needs to be handled because applications like
for example, OvS are in turn affected by this issue.

This behavior can be easily reproduced using testpmd with --enable-rx-cksum option.

# lshw -businfo -c network
Bus info          Device     Class          Description
=======================================================
pci@0000:01:00.0  em1        network        82599ES 10-Gigabit SFI/SFP+ Network
Connection
pci@0000:01:00.1  em2        network        82599ES 10-Gigabit SFI/SFP+ Network
Connection

testpmd -l 2,4 -w 0000:01:00.0 -- -i --port-topology=chained --enable-rx-cksum testpmd> show device info all

********************* Infos for device 0000:01:00.0 ********************* Bus name: pci
Driver name: net_ixgbe
Devargs:
Connect to socket: 0

Port id: 0
MAC address: EC:F4:BB:DB:FC:18
Device name: 0000:01:00.0
Device speed capability: 1 Gbps 10 Gbps

testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start

and sending packets from a tester machine using scapy (w/ zero checksum):

sendp(Ether(src="ec:f4:bb:dc:09:d0",dst="ec:f4:bb:db:fc:18")/IP(src="192.168.30.200", dst="192.168.30.100")/UDP(chksum=0)/Raw("a"*100), iface="em1")

the results is:

port 0/queue 0: received 1 packets
src=EC:F4:BB:DC:09:D0 - dst=EC:F4:BB:DB:FC:18 - type=0x0800 - length=142 -
nb_segs=1 - hw ptype: L2_ETHER L3_IPV4 L4_UDP - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
ol_flags: PKT_RX_L4_CKSUM_BAD PKT_RX_IP_CKSUM_GOOD
PKT_RX_OUTER_L4_CKSUM_UNKNOWN

[1]
https://patchwork.ozlabs.org/project/netdev/patch/[email protected]/

Signature · 2 lines
You are receiving this mail because:
You are the assignee for the bug.
#1 lore raw

https://bugs.dpdk.org/show_bug.cgi?id=629

Thomas Monjalon ([email protected]) changed:

What |Removed |Added
----------------------------------------------------------------------------

         Resolution|---                         |FIXED
             Status|IN_PROGRESS                 |RESOLVED

--- Comment #2 from Thomas Monjalon ([email protected]) --- Resolved in http://git.dpdk.org/dpdk/commit/?id=b9c366e029

Signature · 2 lines
You are receiving this mail because:
You are the assignee for the bug.