New: cpufreq not working on HP tx1000
http://bugzilla.kernel.org/show_bug.cgi?id=9878
Summary: cpufreq not working on HP tx1000
Product: Power Management
Version: 2.5
KernelVersion: 2.6.24
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: cpufreq
AssignedTo: [email protected]
ReportedBy: [email protected]
Latest working kernel version: Unknown
Earliest failing kernel version: 2.6.24
Distribution: Debian Unstable
Hardware Environment: HP tx1230es
Software Environment: -
Problem Description: I can change cpufreq governor but never changes frequency. Fan works most of the time. Tried 2.6.24 and 2.6.24-git12 (git12 includes a patch for this model).
Steps to reproduce:
neonlight:~# cpufreq-set -g powersave neonlight:~# cpufreq-info cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 2004-2006 Report errors and bugs to [email protected], please. analyzing CPU 0: driver: powernow-k8 CPUs which need to switch frequency at the same time: 0 1 hardware limits: 800 MHz - 1.90 GHz available frequency steps: 1.90 GHz, 1.80 GHz, 1.60 GHz, 800 MHz available cpufreq governors: ondemand, powersave, userspace, conservative, performance current policy: frequency should be within 1.90 GHz and 1.90 GHz. The governor "powersave" may decide which speed to use within this range. current CPU frequency is 1.90 GHz (asserted by call to hardware). analyzing CPU 1: driver: powernow-k8 CPUs which need to switch frequency at the same time: 0 1 hardware limits: 800 MHz - 1.90 GHz available frequency steps: 1.90 GHz, 1.80 GHz, 1.60 GHz, 800 MHz available cpufreq governors: ondemand, powersave, userspace, conservative, performance current policy: frequency should be within 1.90 GHz and 1.90 GHz. The governor "powersave" may decide which speed to use within this range. current CPU frequency is 1.90 GHz (asserted by call to hardware).
USING /sys INTERFACE:
neonlight:~# echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor neonlight:~# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor powersave neonlight:~# cat /proc/cpuinfo | grep MHz cpu MHz : 1900.000 cpu MHz : 1900.000 neonlight:~# lsmod | grep powersave cpufreq_powersave 1984 1
KERNEL MODULE LOADS CORRECTLY
neonlight:~# cat /proc/messages | grep powernow [ 3.840457] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 processors (2 cpu cores) (version 2.20.00) [ 4.294452] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x12 [ 4.294454] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13 [ 4.298454] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14 [ 4.302454] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
COUFREQ DEBUG
Here is some cpufreq debug info. Tried to change governor with cpufreq.debug=7 as kernel attribute. Continues to fail. Same result with all governors compiled as modules or not.
neonlight:~# echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor [ 389.818125] cpufreq-core: setting new policy for CPU 0: 1900000 - 1900000 kHz [ 389.818125] freq-table: request for verification of policy (1900000 - 1900000 kHz) for cpu 0 [ 389.818125] freq-table: verification lead to (1900000 - 1900000 kHz) for cpu 0 [ 389.818125] freq-table: request for verification of policy (1900000 - 1900000 kHz) for cpu 0 [ 389.818125] freq-table: verification lead to (1900000 - 1900000 kHz) for cpu 0 [ 389.818125] cpufreq-core: new min and max freqs are 1900000 - 1900000 kHz [ 389.818125] cpufreq-core: governor: change or update limits [ 389.818125] cpufreq-core: __cpufreq_governor for CPU 0, event 3 [ 389.818125] powersave: setting to 1900000 kHz because of event 3 [ 389.818125] cpufreq-core: target for CPU 0: 1900000 kHz, relation 0 [ 389.818125] powernow-k8: targ: cpu 0, 1900000 kHz, min 1900000, max 1900000, relation 0 [ 389.818125] powernow-k8: targ: curr fid 0xb, vid 0x12 [ 389.818125] freq-table: request for target 1900000 kHz (relation: 0) for cpu 0 [ 389.818125] freq-table: target is 0 (1900000 kHz, 4619) [ 389.818125] powernow-k8: cpu 0 transition to index 0 [ 389.818125] powernow-k8: table matched fid 0xb, giving vid 0x12 [ 389.818125] powernow-k8: target matches current values (fid 0xb, vid 0x12) neonlight:~# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor powersave neonlight:~# lsmod | grep freq cpufreq_ondemand 8780 0 cpufreq_powersave 1984 1 cpufreq_userspace 4780 0
neonlight:~# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 104 model name : AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping : 2 cpu MHz : 1900.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch ts fid vid ttp tm stc 100mhzsteps bogomips : 3793.07 clflush size : 64
processor : 1vendor_id : AuthenticAMD
cpu family : 15
model : 104
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-58
stepping : 2
cpu MHz : 1900.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2fdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch ts fid vid ttp tm stc 100mhzsteps
bogomips : 3789.87
clflush size : 64
Max temperature during kernel compilation:
Core0 Temp: +67.0°C Core0 Temp: +72.0°C Core1 Temp: +72.0°C Core1 Temp: +71.0°C
Max temperature when idle:
Core0 Temp: +60.0°C Core0 Temp: +65.0°C Core1 Temp: +66.0°C Core1 Temp: +66.0°C
Mix Temperature when idle:
Core0 Temp: +52.0°C Core0 Temp: +54.0°C Core1 Temp: +58.0°C Core1 Temp: +54.0°C
Signature · 8 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. _______________________________________________ Cpufreq mailing list [email protected] http://lists.linux.org.uk/mailman/listinfo/cpufreq
[Bug 9878] cpufreq not working on HP tx1000
http://bugzilla.kernel.org/show_bug.cgi?id=9878
[email protected] changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee.
[Bug 9878] cpufreq governors do not change frequency on HP tx1000
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=9878
[email protected] changed:
What |Removed |Added
----------------------------------------------------------------------------
Summary|cpufreq not working on HP |cpufreq governors do not
|tx1000 |change frequency on HP
| |tx1000Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee.
[Bug 9878] cpufreq governors do not change frequency on HP tx1000
In reply to [email protected]http://bugzilla.kernel.org/show_bug.cgi?id=9878
[email protected] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |REJECTED
Resolution| |INVALID------- Comment #1 from [email protected] 2008-02-03 12:48 ------- Not a kernel bug but a cpufreqd problem.
Closed
Signature · 3 lines
Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee.